ssi-sensors.com1
Data Sheet
Copyright © 2019, SSI Technologies, LLC Doc. P51-DS — Rev. 01
The MediaSensorTM (P51) family of bulk micromachined, absolute,
sealed and gauge pressure sensors are for both harsh and benign media with superior accuracy over op-
erating temperature. These compact, robust sensors are well suited for a variety of automotive, industrial
and commercial applications.
• Refrigeration • HVAC • Fuel Cells • Process Controls • Pumps • Agriculture
• Hydraulics • Pneumatics • Compressors • Spray Systems • Flow • Robotics
-40 C to 125 C -40 C to 125 C -40 C to 125 C
-40 C to 125 C -40 C to 125 C -40 C to 125 C
-40 C to 105 C -40 C to 105 C -40 C to 105 C
-40 C to 105 C -40 C to 105 C -40 C to 105 C
2X FS 2X FS 3X FS
10X FS or 15,000 PSI 10X FS or 15,000 PSI 10X FS or 15,000 PSI
3X FS 3X FS 3X FS
Available Available Available
Available Not Available Not Available
ssi-sensors.com2Copyright © 2019, SSI Technologies, LLC Doc. P51-DS — Rev. 01
> 1.8 x 10 Cycles
250 Cycles
144 Hours
150 V/m
250 Hours
Grams
Any gas or liquid compatible with 304L and 316L stainless steel. (Including but not limited to motor oil,
in media isolated mediums.
5 ± 0.5 Volts 8 to 30 Volts 8 to 30 Volts
< 6 mA < 3 mA Not Applicable
ssi-sensors.com3Copyright © 2019, SSI Technologies, LLC Doc. P51-DS — Rev. 01
0.00 = Inches
[00.0] = Millimeters
Red Vin Vin Vin
Black NA
White Vout Vout
Tube Gauge Gauge Gauge
2 3 Vent Tube
Gauge Only
PVC
Harness
Length
PVC
A
Z
B
WF
AA
U
3
2
2
3
Wide Pin
NA
2
3
2
3
Form C
TYP
ssi-sensors.com4Copyright © 2019, SSI Technologies, LLC Doc. P51-DS — Rev. 01
TM
Placeholder
Pressure (15 - 7,500 PSI)
A = Absolute (15 - 7,500 PSI)
= Gauge (25 - 300 PSI)
= Sealed Gauge (15 - 7,500 PSI)
A, AI
B
F, V
G
I
U
IS
Z
W
AA
7/8"
7/8"
5/8"
5/8"
5/8"
5/8"
5/8"
1/4 NPT
1/8 NPT
1/4 NPT
1/8 NPT
7/16 - 20
7/16 - 20 (Female)
7/16 - 20 (Snubber)
= Packard
= 4 pin micro connector
(Inner PVC: 16 mil)
= 6"
= 12"
= 18"
= 24"
= 36'
= 72"
= 6"
= 12"
= 18"
= 0.5 - 4.5 V (5 V input only)
= 0.5 - 4.5 V (5 V input only) Includes over voltage protection
= 1 - 5 V (8 to 30 V input only)
= 4 - 20 mA (8 to 30 V input only)
= Option for 5 V and 20 mA for voltage spike protection
may be available. Consult
factory. MOQ's apply.
*Other harness lengths
available - contact factory.
MOQ's will apply.
• Stranded Copper: Tinned
• Outer Jacket PVC: 24 mil
• Vent Tube: 1.57 mil
Contact
SSI Technologies, LLC
3200 Palmer Drive, Janesville, WI 53546
ssi-sensors.com
1 (608) 757-2000
5Copyright © 2019, SSI Technologies, LLC
Warranty
LIMITED WARRANTY: All SSI products are warranted against defective materials and workmanship for a period of one (1)
year from the date of delivery to the original purchaser. Any product that is found to be defective within the one year period will
be replaced at the discretion of SSI. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, PERFORMANCE, OR OTHERWISE. SSI is not an ex-
pert in the customer's technical eld and therefore does not warrant the suitability of its products for the applications selected
by the customer. SSI accepts no responsibility for misuse, misapplication or unauthorized modication of its products.
LIMITATION OF LIABILITY: SSI's obligation under this limited warranty is strictly and exclusively limited to the repair or
replacement free of charge of such articles as are found to be defective in material or workmanship on the condition that the
purchaser gives prompt written notice to SSI of any claim to breach of warranty within the warranty period, and, if
requested, returns the defective articles to SSI. SSI will not assume any expenses or liability for repairs made to its articles
outside of its plant, without its prior written consent. SSI reserves the right to satisfy its warranty obligation in full, with respect
to defective articles, by the payment to the purchaser of all sums paid by the purchaser to SSI for such articles. IN NO
EVENT SHALL SSI BE LIABLE FOR CLAIMS (BASED UPON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEG-
LIGENCE OR OTHERWISE) FOR ANY DAMAGES, WHETHER DIRECT, IMMEDIATE, INCIDENTAL, FORESEEABLE,
CONSEQUENTIAL, OR SPECIAL.
Terms & Conditions
Please visit [https://www.ssi-sensors.com/contact/supplier-portal] for information regarding the SSI Technologies, LLC Terms &
Conditions.
Doc. P51-DS — Rev. 01 — 02/01/2019
Note: Specs are subject to change without notice.
Made In USA
SSI Technologies, LLC is an Amphenol Advanced Sensors company.
