Bulletin I2077 rev. B 11/01 SD150N/R SERIES Stud Version STANDARD RECOVERY DIODES Features Wide current range High voltage ratings up to 2500V High surge current capabilities 150A Stud cathode and stud anode version Standard JEDEC types Typical Applications Converters Power supplies Machine tool controls High power drives Medium traction applications Major Ratings and Characteristics Parameters SD150N/R Units 400 to 2000 2500 150 200 A 125 110 C 235 314 A @ 50Hz 3600 4700 A @ 60Hz 3770 4920 A @ 50Hz 65 110 KA2s @ 60Hz 59 101 KA2s V RRM range 400 to 2000 2500 V TJ - 40 to 180 150 C IF(AV) @ TC IF(RMS) IFSM 2 It www.irf.com case style DO-205AC (DO-30) 1 SD150N/R Series Bulletin I2077 rev. B 11/01 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code VRRM , maximum repetitive peak reverse voltage V VRSM , maximum nonrepetitive peak rev. voltage V 04 400 500 08 12 800 1200 900 1300 16 1600 1700 20 2000 2100 25 2500 2600 SD150N/R IRRM max. @ TJ = TJ max. mA 15 Forward Conduction Parameter I F(AV) I F(AV) 150 A @ Case temperature 125 C Max. average forward current 200 A @ Case temperature 110 C 235 A 3600 t = 10ms No voltage t = 8.3ms reapplied t = 10ms 100% VRRM Maximum I2t for fusing A 3170 t = 8.3ms reapplied Sinusoidal half wave, 65 t = 10ms No voltage Initial TJ = TJ max. KA2s 42 Maximum I2t for fusing V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage Low level value of forward slope resistance rf2 High level value of forward slope resistance VFM 2 DC @ 113C case temperature 3770 46 rf1 180 conduction, half sine wave Max. peak, one-cycle forward, 59 I2t 180 conduction, half sine wave non-repetitive surge current 3000 I 2t Units Conditions Max. average forward current I F(RMS) Max. RMS forward current I FSM SD150N/R Max. forward voltage drop 650 KA2s t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied t = 0.1 to 10ms, no voltage reapplied (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 0.93 V (I > x IF(AV)),TJ = TJ max. 1.06 (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 1.27 m (I > x IF(AV)),TJ = TJ max. 1.04 1.5 V Ipk= 470A, TJ = TJ max, tp = 10ms sinusoidal wave www.irf.com SD150N/R Series Bulletin I2077 rev. B 11/01 Thermal and Mechanical Specifications SD150N/R Parameter TJ Max. junction operating temperature range Tstg Max. storage temperature range R thJC Max. thermal resistance, junction to case 400 to 2000 2500 -40 to 180 150 Units Conditions C -55 to 200 0.23 R thCS Max. thermal resistance, K/W DC operation 0.08 Mounting surface, smooth, flat and case to heatsink greased T Max. allowed mounting torque 10% wt Approximate weight Case style 14 Nm 120 g Not lubricated threads DO-205AC(DO-30) See Outline Table RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Units 180 0.041 0.030 120 0.049 0.051 90 0.063 0.068 60 0.093 0.096 30 0.156 0.157 Conditions TJ = TJ max. K/W Ordering Information Table Device Code SD 15 0 N 25 P B C 1 2 3 4 5 6 7 8 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - N = Stud Normal Polarity (Cathode to Stud) 5 - Voltage code: Code x 100 = VRRM (See Voltage Ratings table) 6 - P = Stud base DO-205AC (DO-30) 1/2" 20UNF-2A 7 - R = Stud Reverse Polarity (Anode to Stud) M = Stud base DO-205AC (DO-30) M12 X 1.75 B = Flag top terminal (for Cathode/ Anode Leads) S = Isolated lead with silicone sleeve (Red = Reverse Polarity; Blue = Normal Polarity) None = Non isolated lead 8 - C = Ceramic Housing (over 1600V) V = Glass-metal seal (only up to 1600V) www.irf.com 3 SD150N/R Series Bulletin I2077 rev. B 11/01 Outline Table CERAMIC HOUSING 16.5 (0.65) 2.6 (0.10) MAX. 35 (1.38) MAX. 6.5 (0.26) MIN. MAX. C.S. 16mm 2 170 (6.69) (0.015 s.i.) SW 27 12.5 (0.49) MAX. 29 (1.14) MAX. DIA. 22.5 (0.88) MAX. 21 (0.82) MAX. 55 (2.16) MIN. 157 (6.18) DIA. 8.5 (0.33) NOM. Conforms to JEDEC DO-205AC (DO-30) All dimensions in millimeters (inches) 1/2"-20UNF-2A* * FOR METRIC DEVICE: M12 X 1.75 GLASS-METAL SEAL 16.5 (0.65) 2.6 (0.10) MAX 35 (1.38) MAX. 6.5 (0.26) MIN. MAX. C.S. 16mm 170 (6.69) 2 (0.015 s.i.) SW 27 12.5 (0.49) MAX. 24 (0.94) MAX. DIA. 23.5 (0.93) MAX. 21 (0.82) MAX. 55 (2.16) MIN. 157 (6.18) DIA. 8.5 (0.33) NOM. 1/2"-20UNF-2A* * FOR METRIC DEVICE: M12 X 1.75 4 www.irf.com SD150N/R Series Bulletin I2077 rev. B 11/01 Outline Table CERAMIC HOUSING 16.5 (0.65) 5.6 (0.22) 40.5 (1.59) MAX. 12.5 (0.49) MAX. 29 (1.14) M AX. DIA. 22.5 (0.88) MAX. 21 (0.82) MAX. 45 (1.77) 9.5 (0.37) DIA. 5.54 (0.22) 1/2"-20UNF-2A* 2.4 (0.09) 27 (1.06) *FOR METRIC DEVICE. M12 X 1.75 DO-205AC (DO-30) Flag All dimensions in millimeters (inches) GLASS-METAL SEAL 16.5 (0.65) 5.6 (0.22) 9.5 (0.37) 36.5 (1.44) 12.5 (0.49) MAX. 24 (0.94) MAX. DIA. 23.5 (0.93) MAX. 21 (0.82) MAX. 41 (1.61) MAX. DIA. 5.54 (0.22) 1/2"-20UNF-2A* www.irf.com 2.4 (0.09) 27 (1.06) *FOR METRIC DEVICE. M12 X 1.75 5 SD150N/R Series 180 SD 150N/R Series R thJC (D C ) = 0.23 K/W 170 160 C ond uc tio n Angle 150 140 30 60 90 120 130 180 120 0 20 40 60 80 18 0 M axim um Allow able C ase Tem perature ( C) M axim um Allo w able C ase Te m per ature ( C) Bulletin I2077 rev. B 11/01 100 12 0 1 4 0 1 6 0 SD 150N/R Series R thJC (D C ) = 0.23 K/W 17 0 16 0 C ond u ction P erio d 15 0 14 0 13 0 90 12 0 30 120 180 DC 11 0 0 40 Average Forw ard C urren t (A) 80 12 0 16 0 200 240 Average Forw ard C urrent (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 220 R th S A .0 =0 W W K/ K/ /W 8K W 1 .4 W R 100 e lta 1K / -D 8K /W 120 K /W 1 .8 80 0 .2 0. K/ W RM S Lim it 6 W 0. K/ 140 5 160 K/ 0. 180 120 90 60 30 180 0.3 200 4 0. M axim um Avera ge Forw ard Pow er Loss (W ) 60 K /W C o nd uc tio n A ngle 60 40 SD 150N/R Series T J = 1 80 C 20 0 0 20 40 60 80 100 120 140 160 20 A vera ge Forw ard C urren t (A ) 40 60 80 1 00 1 20 14 0 16 0 18 0 M a xim um A llow a ble Am bien t Tem p era ture ( C ) 300 K/ W 3 4 e lt a R C ond uctio n P erio d 1 .4 SD 150N/R Series TJ = 180 C W W K/W 1K /W RM S Lim it 50 W -D K/ 0 .8 100 W 0. 6 150 K/ K/ K/ 0. 0 .5 .0 8 W =0 K/ 200 0. 250 SA R th DC 180 120 90 60 30 2 0. M axim um Ave ra g e Fo rw ard P ow e r Loss (W ) Fig. 3 - Forward Power Loss Characteristics K /W 1 .8 K /W 0 0 50 100 150 200 A vera ge Forw ard C urren t (A) 250 20 40 60 80 100 120 140 160 180 M axim um A llow ab le Am bien t Tem p era ture ( C ) Fig. 4 - Forward Power Loss Characteristics 6 www.irf.com SD150N/R Series 3500 Pea k H alf Sin e W ave Forw ard C urren t (A ) Pea k Half Sine W a ve Forw a rd C urren t (A) Bulletin I2077 rev. B 11/01 A t A ny Rated Loa d C on dition A n d W ith Ra ted V RRM Ap p lied Follow in g Surge . Initial TJ = 180 C @ 60 H z 0.0083 s @ 50 H z 0.0100 s 3000 2500 2000 1500 SD 150N /R Series 1000 1 10 4000 3500 3000 M a xim um N on Repetitive Surge C urrent V ersus Pulse Tra in D uration . Initia l T J = 180 C No V oltag e Reapp lied Ra ted VRRM Reap plied 2500 2000 1500 1000 SD 150N/R Series 500 0.01 100 0.1 1 N um b er O f E q ua l Am p litud e H a lf C yc le C urrent P u lses (N) Pulse Train D ura tion (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instantan eous Forw ard C urrent (A) 10000 SD 150 N/R Se ries 1000 TJ = 25 C T J = 180 C 1 00 1 1 .5 2 2 .5 3 3 .5 In sta n ta n e ous Fo rw a rd V oltag e (V ) Tran sient Therm al Im pedance Z thJC (K/W ) Fig. 7 - Forward Voltage Drop Characteristics 1 Steady State Value: R thJC = 0.23 K/W (D C O peration) 0.1 SD 150N/R Series 0.01 0.001 0 .01 0.1 1 10 Sq uare W ave Pulse D uration (s) Fig. 8 - Thermal Impedance ZthJC Characteristic www.irf.com 7 SD150N/R Series Bulletin I2077 rev. B 11/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/01 8 www.irf.com