Cooper Hand Tools Electronics Pliers, Cutters and Tweezers 1 Content Page Tweezers ....................................................................................... Pointed Tips Flat Round Tips Tweezers with Ergonomic Handles SMD Tweezers Special Gripping Tweezer Wafer Tweezers Cutting Tweezers Stripping Tweezers Extraction Tweezers/Connector Tools Cutters ....................................................................................... . . . . . . . 4-16 ....... 5-10 10-11 11 12-13 13 14 15 15 16 . . . . . .17-36 ........ Side Cutters Side Cutters with Ergonomic Handles 21-27 27-28 Tip Cutters Tip Cutters with Ergonomic Handles 29-33 33 Pneumatic Side Cutters and Tip Cutters 34-35 Distance Cutters 36 Pliers ....................................................................................... . . . . . .37-39 ........ EROP . . . . . . . . . . Cutters . . . . . . . . . . . . . and . . . . . . . .Pliers ........................................................ . . . . . .40-42 ........ Stripping . . . . . . . . . . . . . . . . . Tools ...................................................................... . . . . . .42-43 ........ Pre-Forming . . . . . . . . . . . . . . . . . . . . . .Tools ................................................................. . . . . . .44-48 ........ For Passive Components For Active Components IC . . . . .and . . . . . . . SMD . . . . . . . . .Tools .................................................................. Inserting and Extracting Straightening Cutting + Trimming 44-45 46-48 . . . . . .48-49 ........ 48 48 49 Fibre . . . . . . . . . .Optic . . . . . . . . . .Tools ................................................................... . . . . . . . . . . .50 ... Kits ....................................................................................... . . . . . . . . . . .51 ... Vacuum . . . . . . . . . . . . . . .Manipulator ........................................................................ . . . . . .52-55 ........ Index ....................................................................................... . . . . . .58-59 ........ Erem Tools - Precision Made in Switzerland P recision is sought by many but achieved by few. The quality and performance of Erem hand tools is the result of more than 25 years of research and manufacturing expertise. Erem is constantly innovating and developing new tools for use in areas as diverse as electronics, aviation, biology, medical (cardio-vascular, cannulae applications), watch and clock industry, telecoms. Although your initial investment in Erem tools may be higher than some other tools, the final cost based on medium to long term use will be lower due to the economy resulting from the quality of the tools and in the case of the cutters, the free of charge resharpening. The inherent precision of the tools will be reflected in the quality of your products. 3 Erem Tweezers E rem tweeezers are high precision tools of constant high quality. Precise finished and symmetrical tips together with easy handling and perfect balance makes them outstanding tools. The range of Erem tweezers covers a wide diversity of applications. It is produced in many shapes and can be manufactured from different materials. The most popular models are available in a lower cost economy (SL) range. In all models, the type number of the tweezers is stamped, not printed. The Material Erem offers a wide variety of materials, carbon steel, stainless steel, Erem special stainless steel, Nickel plated, Brass or Titanium. The most common ones` are explained below: Carbon Steel Carbon steel tweezers have hard tips but the rust resistance is low and they are magnetic. Carbon steel tweezers have no suffix. Stainless Steel Tweezers from stainless steel have strong tips and are rust resistant but are not as hard and longlasting as carbon steel tweezers. Stainless steel tweezers have the suffix S". Erem Special Stainless Steel This grade of steel is a non magnetic, rust resistant, anti acid alloy. It is temperature resistant up to 300C. Tweezers from special stainless steel have the suffix SA" Coating The Pyroplast coating is an exclusive by Erem. The advantages are: - heat resistance up to 500C (932F), almost twice as much as PTFE, Cralon, etc. - no capillary effect on tips while soldering (non-stick property) - no contamination caused by positive or negative charge - hydrophobic - radiation resistant - thickness 60-80 the suffix is PYR". Note: The Pyroplast coating is not available for all Erem tweezers. It is made to order and needs a minimum order quantity. Please ask for further information. Ergonomic Developed by Erem, tweezers with ergonomically shaped handles to alleviate the problem of Repetitive Strain Injuries (RSI) and reduce operator fatigue. The range has been selected to include the most popular tip shapes (see page 11). The main features are: - ergonomic design for operator comfort and ease of control - two colour, thermally insulated soft grip handles moulded from a synthetic material - ESD safe - the grips absorb heat for additional user protection - manufactured from non magnetic, acid resistant, stainless steel alloy - supplied in a rigid, transparent plastic box for protection and storage The prefix for ergonomic tweezers is "E". Suffix None carbon steel E (Prefix) ergonomic handles M Brass, soft material to avoid damage, no sparks N Nickel-Silver alloy PYR Pyroplast coating RU anti adhesive coating S stainless steel SA, CA special stainless steel, non-magnetic, acid resistant SL economy version TA Titanium, non-magnetic, lightweight, high temperature resistant Z Nickel plated 4 PRECISION TWEEZERS Pointed Tips Straight Pointed Tips Straight Main applications: for conventional and precision handling of small parts like tissue, components, wires. For tasks in micro electronics industry, medicine, laboratories and other applications where high precision is required. Length 80 mm Model M5S Length 80 mm Weight 6g Description Stainless steel, anti-glare finish Micro tweezers, very small, very fine tips, e.g. for work under microscope Length 108 mm Model Length ACSA 108 mm Weight 16 g Description Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with serrated grips for anti-slip handling. For bending and handling. 20AS 108 mm 12 g Stainless steel, anti-glare finish Precision tweezers with serrated grips and inside serrated tips for anti-slip handling. Guide pin to avoid tip overlapping. For bending and handling. Length 110 mm Model 3CS Length 110 mm Weight 11 g Description Stainless steel, anti-glare finish Precision tweezers with long tips for delicate circuit board assembly. 3CSA 110 mm 11 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers for delicate circuit board assembly. 3CSASL 110 mm 11 g Special stainless steel, anti-glare finish, non-magnetic Same as 3CSA but economy model. 3CTA 110 mm 8g Titanium, non-magnetic Same as 3CSA but Titanium for heat resistance and light weight. 53CSA 110 mm 11 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with crush-proof design for handling of delicate parts. 5 PRECISION TWEEZERS Pointed Tips Straight Length 120 mm Model 3SA Length 120 mm Weight 14 g Description Special stainless steel, anti-glare finish, non-magnetic Precision tweezers for micro electronics. Precision work. 3SASL 120 mm 14 g Special stainless steel, anti-glare finish, non-magnetic Same as 3SA but economy model. 1SA 120 mm 14 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers for general use. 1SASL 120 mm 14 g Special stainless steel, anti-glare finish, non-magnetic Same as 1SA but economy model. OOSA 120 mm 20 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers for general purpose e.g. electronic assembly, very sturdy. OOSASL 120 mm 20 g Special stainless steel, anti-glare finish, non-magnetic Same as 00SA but economy model. OOCSA 120 mm 18 g Special stainless steel, anti-glare finish, non-magnetic Same as 00SA but smaller version. OOBSA 120 mm 20 g Special stainless steel, anti-glare finish, non-magnetic Same as 00SA but with serrated grips. OODSA 120 mm 20 g Special stainless steel, anti-glare finish, non-magnetic Same as 00SA but with serrated grips and inside serrated tips. 64SA 120 mm 17 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with serrated grips. 11N 120 mm 17 g Nickel-Silver alloy, anti-glare finish, non-magnetic Precision tweezers Nickel-Silver alloy, perfect non-magnetic. AAZ 120 mm 16 g Nickel plated Precision tweezers Nickel plated, for electronics assembly. Length 125 mm Model Length Weight AAS 125 mm 16 g Description Stainless steel, anti-glare finish Precision tweezers with strong but fine tips. For universal use. AASSL 125 mm 16 g Stainless steel, anti-glare finish Same as AAS but economy model. 6 PRECISION TWEEZERS Pointed Tips Straight Model AASA Length 125 mm Weight 16 g Description Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with strong but fine tips. For universal use. AASASL 125 mm 16 g Special stainless steel, anti-glare finish, non-magnetic Same as AASA but economy model. AM 125 mm 17 g Brass, polished Precision tweezers brass. Soft metal protects sensitive parts against damage. No sparks. Length 130 mm Model Length Weight 249SA 130 mm 20 g Description Special stainless steel / PPS, anti-glare finish, nonmagnetic ESD safe, suitable for fibre optics Precision tweezers with serrated grips and synthetic tips (PPS). Heat resistant up to 250C (480F). Resistant to acids and solder. Waterproof, ESD safe. Does not damage fibre optic cores. 249CER 130 mm 24 g Special stainless steel / Ceramic anti-glare finish, nonmagnetic Same as 249SA but with Ceramic tips for heat resistance up to 900C (1500F). Length 140 mm Model RRS Length 140 mm Weight 30 g Description Stainless steel, anti-glare finish Precision tweezers, long version, very strong. SSSA 140 mm 11 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with narrow grips and low tension. Extra long for use near heat, die attachment. SSSASL 140 mm 11 g Special stainless steel, anti-glare finish, non-magnetic Same as SSSA but economy model. Length 150 mm Model 29SA Length 150 mm Weight 26 g Description Special stainless steel, anti-glare finish, non-magnetic, reverse action Precision tweezers with fibre-grip handles for heat protection. Reverse action for permanent holding parts. Length 160 mm Model 21SA Length 160 mm Weight 23 g Description Special stainless steel, anti-glare finish, non-magnetic Precision tweezers, long version, with serrated grips and inside serrated tips, strong. 7 PRECISION TWEEZERS Pointed Tips Straight Relieved Pointed Tips Straight Relieved Main application: for better product visibility e.g. under microscope or working in confined areas, for handling tiny components. Length 90 mm Model M4AS Length 90 mm Weight 9g Description Stainless steel, anti-glare finish Micro tweezers with very small, very fine tips, e.g. for working under microscope or handling tiny parts in HF assembly. Strong tips due to hardened stainless steel. Length 110 mm Model 4SA Length 110 mm Weight 13 g Description Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with very fine points.. 4SASL 110 mm 13 g Special stainless steel, anti-glare finish, non-magnetic Same as 4SA but economy model. Length 115 mm Model 5MBS Length 115 mm Weight 12 g Description Stainless steel, anti-glare finish Precision tweezers with extremely fine tips (~ 0,03 x 0,07 mm) for use in dissection procedures and handling of very small samples e.g. under microscope. Only for use with soft materials. 5FSA 115 mm 12 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with extremely fine tips (~ 0,05 x 0,1 mm) for use in dissection procedures and handling of very small samples e.g. under microscope. Only for use with soft materials. 5SA 115 mm 12 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with very fine tips e.g. for handling fine wires. 5SASL 115 mm 12 g Special stainless steel, anti-glare finish, non-magnetic Same as 5SA but economy model 2SA 115 mm 16 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with medium tips. 2SASL 115 mm 16 g Special stainless steel, anti-glare finish, non-magnetic Same as 2SA but economy model. 8 PRECISION TWEEZERS Pointed Tips Straight Relieved Length 120 mm Model 258SA Length 120 mm Weight 15 g Description Special stainless steel/PPS, anti-glare finish, nonmagnetic, ESD safe Precision tweezers with serrated grips and synthetic tips (PPS). Heat resistant up to 250C (480F). Resistant to acids and solder. Waterproof, ESD safe. Pointed Tips Bent Pointed Tips Bent Main application: for better product visibility and handling e.g. working in confined areas and under microscope. Length 110 mm Model 3CBS Length 110 mm Weight 11 g Description <) 40, stainless steel, anti-glare finish Precision tweezers bent for delicate circuit board assembly. Length 115 mm Model 5CSA Length 115 mm Weight 12 g Description <) 30, special stainless steel, anti-glare finish, non-magnetic 5BSA 115 mm 12 g 51SA 115 mm 12 g 51SASL 115 mm 12 g 5ASA 115 mm 12 g Same as 51SA but economy model. <) 15, special stainless steel, anti-glare finish, non-magnetic 5ASASL 115 mm 12 g Precision tweezers oblique, relieved. Fine tips. <) 15, special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved, relieved. <) 30, special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved, relieved. <) 30, special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved, relieved. Very fine tips. <) 30, special stainless steel, anti-glare finish, non-magnetic Same as 5 ASA but economy model. 9 PRECISION TWEEZERS Pointed Tips Bent Length 120 mm Model 7SA Length 120 mm Weight 15 g Description Special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved, relieved. For easy handling in confined areas. 7SASL 120 mm 15 g Special stainless steel, anti-glare finish, non-magnetic Same as 7SA but economy model. Length 140 mm Model 65ASA Length 140 mm Weight 11 g Description <) 50, special stainless steel, anti-glare finish, non-magnetic Precision tweezers bent. Very fine points. For handling extra fine components. Length 150 mm Model 24SA Length 150 mm Weight 22 g Description <) 40, special stainless steel, anti-glare finish, non-magnetic Precision tweezers bent. Serrated grips and inside serrated tips. Alignment pin. Useful for all soldering jobs and assembly. 30SA 150 mm 26 g <) 50, special stainless steel, anti-glare finish, non-magnetic, reverse action Precision tweezers bent. With fibre-grip handles for heat protection. Reverse action for permanent holding parts. Useful e.g. for soldering jobs. Flat Round Tips Straight Flat Round Tips Straight Main application: for conventional holding and gripping applications. Length 120 mm Model 2ASA Length 120 mm Weight 15 g Description Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with medium tips for gripping. 10 PRECISION TWEEZERS Flat Round Tips Straight Model 2ASASL Length 120 mm Weight 15 g Description Special stainless steel, anti-glare finish, non-magnetic Same as 2ASA but economy model. 2ASASLT 120 mm 16 g 2ASARU 120 mm 16 g Special stainless steel/PTFE,coated, anti-glare finish, non-magnetic Same as 2ASA but PTFE, coated tips for handling delicate parts. Special stainless steel/coated, anti-glare finish, non-magnetic Same as 2ASA but coated tips for handling adhesive parts, gaskets, Kapton ribbons, labels with negligible capillary effect. 25SA 120 mm 15 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with flat round tips. For gripping. 52ASA 120 mm 15 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with crush-proof design for handling of delicate parts. Precision Tweezers with Ergomomic Handles* Main applications: Thermally insulated soft grips, ESD safe, ergonomically shaped to reduce operator's hand fatigue. Model E5SA Length 120 mm Weight 25 g Description Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, very fine tips, e.g. for handling fine wires. E3CSA 120 mm 25 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, long fine tips, for delicate circuit board assembly. E00SA 120 mm 30 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, fine tips, for general use. Very sturdy. E7SA 120 mm 28 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers curved, fine tips, for easy manipulation in confined areas. E2ASA 120 mm 28 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, flat round tips, for gripping. Note: colour coatings subject to variations without prior notice. * Ergonomic features see page 4. 11 SMD TWEEZERS SMD Tweezers Angled Head Main application: for handling chips or miniature SMD components. For mounting on SMD boards or Ceramic substrates. Model 102ACA Length 115 mm Weight 15 g Description Special stainless steel, anti-glare finish, non-magnetic SMD tweezers with angled head and blunt edges to avoid board damage. For handling small components, mounting on SMD boards, hybrids ICs, watch hands, etc. 102ACAX 115 mm 14 g Special stainless steel, anti-glare finish, non-magnetic, reverse action Same as 102ACA but reverse action. 103ACA 115 mm 15 g 45, special stainless steel, anti-glare finish, non-magnetic SMD tweezers with angled head and blunt edges to avoid board damage. For handling of small components. Rounded Head 39SA Model Length 110 mm Weight 15 g Description 40 SA 110 mm 15 g O 0,4 mm, special stainless steel, anti-glare finish, non-magnetic 150SAMF 120 mm 13 g O 1,2 - 2,5 mm, special stainless steel, anti-glare finish, non-magnetic O 0,3 mm, special stainless steel, anti-glare finish, non-magnetic Straight, serrated grips. For gripping wires and small cylindrical parts. Straight, serrated grips. For gripping wires and small cylindrical parts. SMD tweezers straight, serrated grips. For gripping small cylindrical parts, mini MELFs. Very narrow tips. 150SAD 120 mm 13 g O 1,5 - 3 mm, special stainless steel, anti-glare finish, non-magnetic SMD tweezers straight, serrated grips. For gripping small cylindrical parts. 12 SMD TWEEZERS Rounded Head Model Length Weight 150SA 120 mm 13 g Description O 1,5 - 3 mm, special stainless steel, anti-glare finish, non-magnetic SMD tweezers straight, serrated grips. For gripping small cylindrical parts. 151SA 120 mm 13 g O 3 - 6 mm, special stainless steel, anti-glare finish, non-magnetic SMD tweezers straight, serrated grips. For gripping small cylindrical parts. Rounded Head Bent Model Length Weight 32BSA 115 mm 17 g Description 45, O 5 mm, special stainless steel, anti-glare finish, non-magnetic SMD tweezers bent. For small cylindrical components or insulated fibres. 32BSA20 115 mm 17 g 45, O 2 mm, special stainless steel, anti-glare finish, non-magnetic Same as 32BSA but O 2 mm. 32BSA25 115 mm 17 g 45, O 2,5 mm, special stainless steel, anti-glare finish, non-magnetic Same as 32BSA but O 2,5 mm. 150SAMB 115 mm 13 g 40, O 1,2 - 2,5 mm, special stainless steel, anti-glare finish, non-magnetic SMD tweezers bent, serrated grips. For gripping small cylindrical parts. Special Gripping Tweezers Model 940AS Length 120 mm Weight 17 g Description Stainless steel, anti-glare finish Gripping tweezers with locking clip. For various applications. Resists a tensile force of ~ 5 kg. 13 WAFER TWEEZERS Wafer Tweezers Wafer Tweezers Main application: for handling wafers from 3" to 6". Different coatings or sizes on request. Model 91SA Length A 125 mm 12 mm B 7 mm Weight 15 g Description 3"- 4", special stainless steel, anti-glare finish, non-magnetic Standard wafer tweezers to pick up 3" or 4" Silicon wafers. Serrated grips. 500ASA 130 mm 16 mm 8 mm 22 g 4"- 5", special stainless steel, anti-glare finish, non-magnetic Wafer tweezers with fingers to reduce the risk of damage. For 4" and 5" wafers. Serrated grips. 600ASA 130 mm 19,5 mm 8 mm 23 g 6", special stainless steel, anti-glare finish, non-magnetic Wafer tweezers with fingers to reduce the risk of damage. For 6" wafers. Serrated grips. 608ASA 130 mm 30 mm 8,5 mm 23 g 6", special stainless steel, anti-glare finish, non-magnetic Same as 600ASA but with 30 mm width. 600JSA 130 mm 20 mm 8 mm 24 g 4"- 6", special stainless steel, anti-glare finish, non-magnetic Wafer tweezers with free-floating PTFE, paddle for self adjustment on 4"- 6" wafers. Serrated grips. 140SA 120 mm 30 mm 5 mm 20 g 4" - 5", special stainless steel/Polyester, anti-glare finish, non-magnetic Wafer tweezers with Delrin tips. Available with adjustable opening screw. For 4" to 5" wafers. Serrated grips. Temperature resistance 170C. 141SAP 150 mm 30 mm 8 mm 30 g 5"- 6", special stainless steel/PTFE,, anti-glare finish, non-magnetic Wafer tweezers with Polyester tips. The perfect wafer tweezers. Will not damage Si, GaAs or Ti wafers. Serrated grips. 141SAPH 150 mm 30 mm 8 mm 30 g 5"- 6", special stainless steel/Halar, anti-glare finish, non-magnetic Same as 141SAP but with Halar coating and plastic tips without pigmentation. Halar is acids resistant. 14 CUTTING, STRIPPING TWEEZERS Cutting Tweezers Cutting Tweezers Main application: e.g. for cutting soft wires on micro electronics circuits, very precise. Model 15AGS Length 115 mm Weight 21 g Description Anti-glare finish Cutting tweezers with fine oblique head and induction hardened cutting blades for increasing life time. For soft wires up to O 0,25 mm. 15AGW 115 mm 26 g Anti-glare finish Cutting tweezers with oblique head. Induction hardened cutting blades improves cutting capability and life time. For soft wires up to O 0,25 mm. Stripping Tweezers Stripping Tweezers Main application: for stripping small wires, standard or PTFE, insultations, very precise. Model 29Y Length 120 mm Weight 22 g Description Stainless steel, anti-glare finish Miniature stripping tweezers. Serrated grips. Will strip tiny wires between AWG 42 and 32 (0,06 to 0,20 mm). Wire samples required. 29W30 120 mm 28 g Stainless steel/fibre handles, anti-glare finish, reverse action Stripping tweezers with fibre-grip handles. For standard or PTFE, wires between AWG 30 and 28 (0,25 mm - 0,3 mm). Reverse action. 15 EXTRACTION TWEEZERS Extraction Tweezers = Outside O Extraction Tweezers Main application: to extract connected wires from the rear of the connectors. = Inside O Model Length O A O B 024C 028 16 C Weight 120 mm 1,75 2,15 mm mm 8 mm 20 g 120 mm 1,9 2,15 mm mm 8 mm Description Stainless steel Extraction tweezers for Sub-D types. For ITT-Canon / TRW CET 20D, Honda connectors, Siemens, Philips, Souriau-Framatome, etc. 20 g Stainless steel Same as 024C but with thinner nozzle wall for wires with larger insulations. CUTTERS AND PLIERS Cutters and Pliers Erem Cutters and Pliers rem cutters and pliers are unique in the degree of quality, precision, reliability, ergonomy and long life they offer when compared to other professional tools, for the following reasons: E The Steel Erem cutters and pliers are not forged. They are manufactured from billets of high grade tool steel, which uses a Swiss developed lamination technique. It employs a multiple extrusion process to super compact the steel imparting additional strength and toughness to the tools. This results in reliable and long lasting tools. The Joints The surfaces between the two halves of the joint are machine finished and in conjunction with the interlocking precision screw that is used to join both halves together ensure wobble free operation and eliminates blade overlap which could cause mechanical shock and damage components. The Springs The return springs are mounted internally in the head of the tools and are guaranteed for 1 million operations. They operate with a constant resistance over the movement of handles to reduce operator fatigue making them superior to leaf or coil springs. EMOS Erem Maximum Opening Stop, limits the handle spread by preventing the tips of the blades from opening more than 5mm. To promote operator comfort and ergonomy. 17 CUTTERS AND PLIERS Cutters and Pliers Customer Service 1. Spare parts Erem pliers and cutters and their spare parts are guaranteed against manufacturing defects. The following parts will be supplied free of charge should a defect be found - Foam grips - Springs - Opening stops Please contact your local Cooper Hand Tools office for advice on procedure. 2. Resharpening Erem cutters can be returned to Erem Switzerland for free of charge resharpening. It is possible to resharpen tools up to three times depending on their condition. Tools will be returned to you fitted with new handles depending on their shape. You will be invoiced for transport costs only. Specials Erem is able to offer tools for special applications without minimum order quantity. Dimensioned drawings /and or samples of your application will be required. Ergonomic Handles Erem Cutters and Pliers with Ergonomic Handles The Work Related Upper Limb Disorder (WRULD) is a muscular skeletal problem related to the arm. WRULDS can be caused by positional fatigue or nerve damage caused e.g. by repetitve use of non ergonomic hand tools, the socalled Repetitive Strain Injuries (RSI). The ability to grip and hold objects can be impaired. Repetitive movements can cause compression of the median nerve and produce sensations of pins and needles. MEDIAN NERVE MUSCLES AT MEDIAN NERVE BASE OF THUMB TENDONS CARPAL BONES CARPAL TUNNEL WRULDS is a direct result of companies manufacturing processes and working practices and will as result detrimental to the quality of a companies products. Therefore a reduction of the factors which cause WRULDS will improve working practice and product quality. In fact it is arguable that without quality working practice there can be no quality product. To alleviate the problem of RSI and Erem have designed a range of tools with ergonomic handles.The compound curves of the handles of the Erem ergonomic cutters and pliers allow the pressure applied to the handles when cutting or gripping to be evenly spread over the palm of the hand. The thumb and fingers are self- positioned by the handles, making the tool comfortable for the operator to use and reducing the incidence of WRULDS.The comfortable foam grips are ESD safe and easily interchangeable. The following tools are available with ergonomic handles: - Side Cutters see page 27 - 28 - Tip Cutters see page 33 - Pliers see page 39 18 CUTTERS AND PLIERS Cutters and Pliers ESD Safety The foam cushion grips are static dissipative and are fitted a standard to all models. conductive 10 static dissip. 100 antistatic 105 EMI/RF Sources:DOD/CECC insulating 1012 1020 /cm2 Erem-Cutters + Pliers Cost Per Cut Comparison The best way to compare the real costs between different hand tools is to consider the number of cuts - besides the work itself and the performance.The parameters below indicate how Erem tools - representing a higher initial investment - become even more economical than lower quality cutters on a medium or long-term basis. A = Low-end tools B = Medium Quality C = Erem Price 100 1,2 = average stages of Erem cutters needing resharping. 90 80 70 60 50 40 30 C 20 B 2 1 No. of cuts/1.000 10 A 25 50 75 100 125 150 175 200 225 250 275 300 325 19 CUTTING CAPABILITIES Cutting Capabilities Side Cutters* Model max. Cu (Copper) mm o 0,1-0,6 o 0,6-1,2 Cut* SF F FF o >1,2 147A x 511E 512E 512N 521E 522E 522N 532N 576EZ 577E 592E 595E 597E 599E x x x 611E 612E 612N 622N 622NA 622NB 632N 676E 677E x x x x x x x x x x x Tip Cutters* Model max. Cu (Copper) mm o 0,1-0,6 o 0,6-1,2 o >1,2 503E 504AE 555E 570E 572E 573E 575E 582E 582EW x x x x x x x x x 670E x 1503N x x 2282E x x x x x x x x x x 812N 822N 884E 886E 896E x 1512N 1522N 1522NA 1522NB x 2212E 2222E 2222EA 2222EB 2232E x x x x x = Semi Flush x x x = Flush x x x = Erem Super Full Flush x Description see page 21 20 F x 710E 776E 792E *Note: Cut* SF There is no max. Cu indication for Tungsten Carbide cutters. Please ask for the according cutting capabilities. SIDE CUTTERS Side Cutters Side Cutters Erem offers a wide range of precision side cutters. To establish which cutter is correct for your application follow the steps below Head Form Oval Head The most common head shape. For standard cutting applications where access is not the problem. Tapered Head For cutting tasks where easier access is required. The tapered head shape allows better tip access than the oval head but without much reducing the cutting capability. Relieved Head For cutting in confined areas. This is the smallest head shape available. One side is cut away for access even in confined areas. Due to the cut away the cutting capability is reduced. Flush tip cutting. Cut Semi Flush These blades allow a very high resistance. Will cut from tip to heel, malleable wires like Copper as well as hard wires. Leaves a pinch at the end of the wire. For all applications where the cutting type is not so important. Flush Allows a flat cut with the same cutting capacities. The edge of the wire is cut off flat. Thanks to faster penetration into the component the operator's effort is substantially reduced. No solder spikes after using wave soldering process. Super Full Flush An Erem exclusivity. This absolute full flush cut leaves a perfect flat surface on cut leads It prevents any pinching of leads. Flat, clean cut. No cutting rework after soldering. Soft wires only. 1 1. Erem Cut 2 2. Others Size 110 mm Small short head for increased cutting resistance. For almost all cutting applications. 115 mm Longer and finer head. For cutting applications where easy access is more important than a high cutting capacity. 120 mm Strong version. For all cutting applications where high cutting capacity is required. Safety Lead Device Cutting safety device, holds wire scraps. Can be adapted on all side cutters series 500, 600 and 2200. Add "W" when ordering, e.g. 595EW 21 SIDE CUTTERS Oval Head Oval Head Main application: standard cutting applications. Length 110 mm Model L A B C 612N 110 mm 9 mm 9 mm 6 mm Max. Cu Description Weight o 1,25 mm 48 g Description Semi flush cut, high grade tool steel, burnished, ESD safe, resharpenable Miniature side cutter. Economical line. Small head. 611E 110 mm 9 mm 9 mm 6 mm o 1,5 mm 48 g Semi flush cut, high grade tool steel, burnished, ESD safe, resharpenable Miniature side cutter. Small head. 612E 110 mm 10,5 mm 9 mm 6 mm o 1,5 mm 48 g Semi flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Standard head width. 622N 110 mm 9 mm 9 mm 6 mm o 1,25 mm 48 g Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Economical line. Small head. 632N 110 mm 9 mm 9 mm 6 mm o 1,25 mm 48 g Super full flush cut, high grade tool steel, antiglare finish, ESD safe, resharpenable Miniature side cutter. Economical line. Small head. Perfect full flush cut. Soft wires only. 710E 110 mm 8,8 mm 9 mm 6 mm o 1,0 mm 48 g Super full flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Standard head width. Perfect full flush cut. Soft wires only. Length 115 mm Model L A B C Max. Cu Weight 512N 115 mm 10 mm 10,5 mm 6,5 mm o 1,6 mm 67 g Description Semi flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for universal use. Medium size. Economical line. 22 SIDE CUTTERS Oval Head Model 511E L 115 mm A 10 mm B 10,5 mm C 6,5 mm Max. Cu Weight o 1,6 mm 67 g Description Semi flush cut, high grade tool steel, burnished, ESD safe, resharpenable Side cutter for universal use. Medium size. 512E 115 mm 12 mm 10,5 mm 6,5 mm o 1,6 mm 67 g Semi flush cut, high grade tool steel, burnished, ESD safe, resharpenable Side cutter for universal use. Medium size. For tough cutting applications. 597E 115 mm 12 mm 10,5 mm 6,5 mm o 1,6 mm 67 g Semi flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter with strong head. For soft and small hard wires. 599T 599TFO 521E 115 mm 11,5 mm 115 mm 115 mm 15 mm 10 mm 10,5 mm 10,5 mm 10,5 mm 6,5 mm 6,5 mm 6,5 mm ask for cutting capability* 67 g ask for cutting capability* 67 g o 1,2 mm 67 g Semi flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Side cutter with Tungsten Carbide blades for constant quality cuts. Resistant to small stainless steel wires. Semi flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Side cutter with Tungsten Carbide blades. For cutting Vectran braided wires, fibre optics, Kevlar and small stainless steel braids. Ask for special application. Flush cut, high grade tool steel, polished head, ESD safe, resharpenable Side cutter for universal use. Medium size. 522N 115 mm 10 mm 10,5 mm 6,5 mm o 1,6 mm 67 g Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for universal use. Medium size. Economical line. 522E 115 mm 12 mm 10,5 mm 6,5 mm o 1,2 mm 67 g Flush cut, high grade tool steel, polished head, ESD safe, resharpenable Side cutter for universal use. 599E 115 mm 12 mm 10,5 mm 6,5 mm o 1,6 mm 67 g Flush cut, high grade tool steel, anti-glare finish, ESD safe Side cutter with robust head. 599TF 532N 115 mm 11,5 mm 115 mm 10 mm 10,5 mm 10,5 mm 6,5 mm 6,5 mm ask for cutting capability* 67 g o 1,6 mm 67 g Flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Side cutter with Tungsten Carbide blades for constant quality cuts. Resistant to small stainless steel wires. Super full flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for universal use. Medium size. Economical line. Perfect full flush cut. Soft wires only. * Please provide wire sample. 23 SIDE CUTTERS Oval Head Length 120 mm Model L A B C Max. Cu Weight 812N 120 mm 15 mm 13,5 mm 7,5 mm o 1,8 mm 85 g Description Semi flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for large wires. Economical line. 896E 120 mm 15 mm 13,5 mm 7,5 mm o 1,8 mm 85 g Semi flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for hard leads, Kovar wires, connector pins, etc. 822N 120 mm 15 mm 13,5 mm 7,5 mm o 1,8 mm 85 g Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for large wires. Economical line. Tapered Head Tapered Head Main application: cutting applications where easy access is required. Length 110 mm Model 622NA L 110 mm A 9 mm B 9 mm C 6 mm Max. Cu Weight o 1,0 mm 48 g Description Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Small tapered head allows very good access. Economical line. 677E 110 mm 9 mm 9 mm 6 mm o 1,0 mm 48 g Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Small tapered head allows very good access. Length 115 mm Model 595T L A B C Max. Cu Weight 115 mm 12 mm 10,5 mm 6,5 mm ask for cutting capability* 67 g * Please provide wire sample. 24 Description Semi flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Side cutter with Tungsten Carbide blades for constant quality cuts. Resistant to small stainless steel wires. Ask for special application. SIDE CUTTERS Tapered Head Length 115 mm Model 577E L A B C Max. Cu Weight 115 mm 9 mm 10,5 mm 6,5 mm o 1,2 mm 67 g Description Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for universal use. Medium size. 595E 115 mm 9 mm 10,5 mm 6,5 mm o 1,2 mm 67 g Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for universal use. Medium size. 595TF 115 mm 12 mm 10,5 mm 6,5 mm ask for cutting capability* 67 g Flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Side cutter with Tungsten Carbide blades for constant quality cuts. Resistant to small stainless steel wires. * Please provide wire sample. Length 120 mm Model 886E L A B C Max. Cu Weight 120 mm 15 mm 13,5 mm 7,5 mm o 1,8 mm 83 g Description Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for large wires. Relieved Head Relieved Head Main application: cutting applications in confined areas. Length 110 mm Model L A B C Max. Cu Weight 662NB 110 mm 9 mm 9 mm 6 mm o 0,8 mm 48 g Description Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Super fine relieved head allows very good access. Economical line. 25 SIDE CUTTERS Relieved Head Length 110 mm Model L A B C Max. Cu Weight 676E 110 mm 9 mm 9 mm 6 mm o 1,0 mm 48 g Description Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Super fine relieved head allows very good access. 776E 110 mm 9 mm 9 mm 6 mm o 1,0 mm 48 g Super full flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature side cutter. Super fine relieved head allows very good access. Soft wires only. 632NCF 110 mm 9 mm 9 mm 6 mm ask for cutting capability* 48 g Super full flush cut, high grade tool steel, anti-glare finish, ESD safe, soft materials only Miniature side cutter. Special fine, high precision cut exclusively designed for soft materials like small Silicone tubing in medical applications, precision connector sealing, miniature rubber gaskets or cutting of molded soft synthetic parts. Super fine relieved head allows very good access. * Please provide wire sample. Length 115 mm Model 576Z L 115 mm A 9 mm B 10,5 mm C 6,5 mm Max. Cu Weight o 1,2 mm 67 g Description Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter with fine relieved head. Medium size. For fine wires. 592E 115 mm 12 mm 10,5 mm 6,5 mm o 0,6 mm 67 g Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter with relieved head. Medium size. For Copper wires. 576TX 792E 115 mm 115 mm 11 mm 13 mm 10,5 mm 10,5 mm 6,5 mm 6,5 mm ask for cutting capability* 67 g o 0,6 mm 67 g Flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Miniature side cutter. Super fine relieved head allows very good access. Tungsten Carbide blades for constant quality cuts. Resistant to small stainless steel wires. Super full flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter with relieved head. Medium size. For fine soft wires. Length 120 mm Model 884E L 120 mm A 15 mm B 13,5 mm C 7,5 mm Max. Cu Weight o 1,8 mm 81 g Description Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Side cutter for large wires. 26 SIDE CUTTERS Specials Specials Model 147A L 120 mm A 12 mm B 10,5 mm C 7,5 mm Max. Cu Weight o 2,0 mm 100 g Description Semi flush cut, high grade tool steel, anti-glare finish, ESD safe, compound action Compound action side cutter. Easy cutting for hard wires. 3,5 times less force needed than with conventional cutters. High cutting capacity: hard wires up to 0,5 mm, soft wires up to 2,0 mm. Flush cut on request. 884EPCM 115 mm max.D 0,8 mm max.B 2,0 mm - 79 g Flush cut, high grade tool steel, anti-glare finish, ESD safe, PCB separation Side cutter for PCB separation only. New improved design for higher blade resistance. No breakage guarantee. Side Cutters with Ergonomic Handles* Oval Head Main applications: Constant production cutting applications. Model 2212E L 140 mm A 10 mm B 10 mm C 5,8 mm Max. Cu Weight o 1,25 mm 70 g Description Semi flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for universal use. 2222E 140 mm 10 mm 10 mm 5,8 mm o 1,25 mm 70 g Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for universal use. 2232E 140 mm 10 mm 10 mm 5,8 mm o 1,25 mm 70 g Super full flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for fine and soft wires. *Ergonomic features see page 18 27 SIDE CUTTERS WITH ERGONOMIC HANDLES Tapered Head Tapered Head Model 2222EA L 140 mm A 10 mm B 10 mm C 5,8 mm Max. Cu Weight o 1,0 mm 70 g Description Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for universal use. Tapered head for easier access. Relieved Head Relieved Head Model L A B C Max. Cu Weight 2222EB 140 mm 10 mm 10 mm 5,8 mm o 0,8 mm 70 g Description Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for universal use. Relieved head for working in confined areas. 28 TIP CUTTERS Tip Cutters Tip Cutters Erem offers the largest variety of high precision tip cutters. All edges are finely radiused to avoid board damaging. To find the cutter for your demand just follow the steps Erem Blade Protection All tip cutters have an "anti-overbite" system which prevents blades from overlapping. Head Form Angled For standard tip cutting applications. Angled Narrow For applications in confined areas. Longer but narrow head for better reach between parts and into areas with limited access. Straight For vertical or horizontal tip cutting applications. Cut Semi Flush These blades allow a very high resistance. Will cut malleable wires like Copper as well as hard wires. Leaves a pinch at the end of the wire. Flush Allow a flat cut with high cutting capacities. The edge of the wire is cut off almost squarely. Guaranteed precision even after constant usage. Thanks to faster penetration into the component the operator's effort is substantially reduced. 1 1. Erem Cut 2 2. Others Size 110 mm Small short head, for increased cutting resistance. For almost all cutting applications. 115 mm Longer and finer head. For cutting applications where easy access is more important than a high cutting capacity. 120 mm Strong version. For all cutting applications where high cutting capacity is required. Safety Lead Device Cutting safety device, holds wire scraps. Can be adapted on 582E only. Add "W" when ordering, e.g. 582EW. 29 TIP CUTTERS Angled Head Angled Head Main application: for standard tip cutting applications. Length 110 mm Model 503ET 503E L A B C Max. Cu Weight D 110 mm 12 mm 10,5 mm 6,5 mm 10 mm ask for 67 g cutting capability* Description 110 mm 12 mm 10,5 mm 6,5 mm 10 mm o 1,2 mm <) 30, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable 67 g <) 30, semi flush cut, Tungsten Carbide, anti-glare finish, ESD safe Tip cutter. Standard size. Tungsten Carbide blades for constant quality cuts even on hard wires. Tip cutter. Standard size. For universal use. 504AE 110 mm 13 mm 10,5 mm 6,5 mm 10 mm o 1,2 mm 67 g <) 30, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter. Standard size. Rounded head. For universal use. 503ETF 110 mm 12 mm 10,5 mm 6,5 mm 10 mm 67 g ask for cutting capability* <) 30, flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Tip cutter. Standard size. Tungsten Carbide blades for constant quality cuts even on hard wires. * Please provide wire sample. Angled Head Small Angled Head Small Main applications: for applications in confined areas. Length 110 mm Model 575E L A B C D Max. Cu 110 mm 15 mm 10,5 mm 6,5 mm 10 mm o 0,6 mm Weight 67 g Description <) 45, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter. Small size. For delicate work on hybrid circuits or micro modules. 30 TIP CUTTERS Angled Head Small Length 115 mm Model 572E L A B C Max. Cu Weight D 115 mm 18 mm 10,5 mm 6,5 mm 6,5 mm o 0,6 mm 68 g Description <) 40, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter. Medium size. Relieved jaws for easier access. 593AE 115 mm 20 mm 10,5 mm 6,5 mm 4 mm o 1,0 mm 68 g <) 50, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter. Cuts easily DIL leads from the rear. Cuts pins on dense PCB. Ideal maintenance tool. 582E 115 mm 19 mm 10,5 mm 6,5 mm 7 mm o 1,0 mm 68 g <) 45, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter medium size. A must when working on PCB's, cutting component leads. Also ideal for rework. 582EW 115 mm 19 mm 10,5 mm 6,5 mm 7 mm o 1,0 mm 70 g <) 45, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable, retention clip Same as 582E but with retention clip, holds wire scraps after cutting. Length 120 mm Model 555E L A B C 120 mm 21 mm 10,5 mm 6 mm Max. Cu Weight D 6,5 mm o 1,2 mm 68 g Description <) 40, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter. Strong version. 31 TIP CUTTERS Straight Tapered Head Straight Tapered Head Main applications: for horizontal use and easier access. Length 110 mm Model 670E L A B 110 mm 10,5mm 9 mm C D 6 mm 3 mm Max. Cu Weight o 0,6 mm 48 g Description Horizontal, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature tip cutter. For cutting small wires in dense working areas. Vertical SMD cutter. 670EP 110 mm 10 mm 9 mm 6 mm 2 mm o 0,25 mm 48 g Vertical tip cutter, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Miniature tip cutter. High precision SMD lead cutting. Micro-packages up to 0,25 fine pitches before desoldering. No breakage guarantee. For -pitches under 0,5 mm use 670 EPF Length 120 mm Model 570E L A 120 mm 22 mm B C D Max. Cu Weight 9 mm 6,5 mm 4 mm o 0,6 mm 67 g Description Flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter for horizontal or vertical tip cutting. For cutting at extreme tips. 32 TIP CUTTERS Straight Head Straight Head Main applications: for vertical use Model 573E L A 120 mm 23 mm B 9 mm C D Max. Cu 6,5 mm 3,5 mm o 0,8 mm Weight 67 g Description Vertical, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable Tip cutter for vertical tip cutting. For fine wires. Tip Cutters with Ergonomic Handles* Angled Head Small Model 2282E L A B C 140 mm 20 mm 10 mm 5,8 mm D Max. Cu 7 mm o 1,0 mm Weight 70 g Description <) 45, flush cut, high grade tool steel, anti-glare finish, ESD safe, resharpenable, ergonomic Ergonomic tip cutter. Medium size. Ideal for working on PCB's or cutting component leads. *Ergonomic features see page 18 33 PNEUMATIC CUTTERS Pneumatic Side Cutters and Tip Cutters Pneumatic Side Cutters and Tip Cutters The Erem 1500BSF is a small lightweight air tool that can be fitted with a range of cutter heads making this tool extremely versatile. It is suitable for the cropping of conventional components, as well as small ductile or plastic parts. Housing Model 1500BSF D L 28 mm 130 mm Weight 130 g (w.o. head) Description Manual air tool Small precise pneumatic cutter housing. Improved lifetime and reliability. Easy interchangeable cutting heads. Requires 4- 6 bar oil-free, clean compressed air. New economical version. Cutting Heads for 1500BSF Side Cutters Oval Head Model 1512N A 10 mm B C Max. Cu Weight 10,5 mm 6,5 mm o 1,6 mm 35 g Description Semi flush cut, high grade tool steel, anti-glare finish, resharpenable Side cutter for universal use. Medium size. Economical line. Improved lifetime. 1522N 10 mm 10,5 mm 6,5 mm o 1,6 mm 35 g Flush cut, high grade tool steel, anti-glare finish, resharpenable Side cutter for universal use. Medium size. Economical line. Improved lifetime. 34 PNEUMATIC SIDE CUTTERS AND TIP CUTTERS Tapered Head Tapered Head Model 1522NA A B C Max. Cu Weight 9 mm 10,5 mm 6,5 mm o 1,4 mm 35 g Description Flush cut, high grade tool steel, anti-glare finish, resharpenable Side cutter for easier access. Medium size. Economical line. Improved lifetime. Relieved Head Model 1522NB A B C Max. Cu Weight 9 mm 10,5 mm 6,5 mm o 1,2 mm 32 g Description Flush cut, high grade tool steel, anti-glare finish, resharpenable Side cutter for confined areas. Medium size. Economical line. Improved lifetime. Tip Cutters Angled Head Model 1503E A B C 12 mm 10,5 mm 6,5 mm D Max. Cu Weight 9 mm o 1,2 mm 38 g Description <) 30, flush cut, high grade tool steel, anti-glare finish, resharpenable Tip cutter. Small size. For universal use. Note: further head shapes available on request. 35 DISTANCE CUTTERS Distance Cutters Distance Cutters Erem distance cutters are available with fixed or adjustable cutting distance. The tips are brightly polished to avoid board damage E D B C The Erem protective stop screw increases the performance of the tip cutters: Clearance B larger than the diameter = cut wire is ejected Clearance B smaller than the wire diameter = cut wire is held Adjust the protective stop screw D to set blade C does not hit the opposite side. This improves the Lifetime of the blade. Fixed Cutting Height Model 530E L A E F Max. Cu Weight Description 120 mm 20 mm 3 mm 1,5 mm o 1,0 mm 67 g Flush cut, high grade tool steel, polished tips, ESD safe (Standard) Distance cutter. Cuts the lead to a predetermined length of 1,5 mm. Length from 0,5 mm to 2,5 mm on request, see price list. Reduces mechanical shock on components. With adjustable screw for possible wire holding. 549E 500-108 115 mm 20 mm 3 mm 1,5 mm o 1,0 mm blade (Standard) 4,5 mm 67 g 120 mm 20 mm 3 mm 1,5 mm o 0,8 mm 67 g 45, flush cut, high grade tool steel, polished tips, ESD safe Distance cutter. Cuts the lead to a predetermined length of 1,5 mm. Lenght from 0,5 mm to 2,5 mm on request, see price list. Reduces mechanical shock on components. Flush cut, high grade tool steel, polished tips, ESD safe Distance cutter. Cuts the lead to a predetermined length of 1,5 mm. Reduces mechanical shock on components. 530S 110 mm 10 mm 4 mm 1,5 mm o 1,0 mm 65 g (Standard) 30, flush cut, high grade tool steel, polished tips, ESD safe Distance cutter. Cuts and flattens leads to prevent component from fallen off the circuit board. Predetermined length of 1,5 mm. Length from 0,5 mm to 2,5 mm on request. Adjustable Cutting Height Model 530E15A L A E F Max. Cu Weight Description 120 mm 20 mm 4,5 mm 1,2 - 6 o 1,2 mm 70 g Flush cut, high grade tool steel, polished tips, ESD safe mm Distance cutter with adjustable cutting length from 1,2 mm to 6 mm with setting screw. 573EB 115 mm 23 mm 3,5 mm 0-5 mm o 0,8 mm 70 g Flush cut, Plastic anvil. High grade tool steel, polished tips, ESD safe Distance cutter with adjustable cutting length from 0 mm to 5 mm with setting screw. Replaceable synthetic stop, no risk of board damage. 36 PLIERS Pliers Pliers Erem offer a range of pliers with standard and ergonomic handles. Round Nose Model 543E L A 120 mm 23 mm B 9 mm C Eo G 6,5 mm 0,8 mm 1,6 mm Weight 67 g Description High grade tool steel, anti-glare finish, ESD safe Round nose pliers with smooth jaws, very precise. Needle Nose Model 547 L A 120 mm 23 mm B 9 mm C E G 6,5 mm 0,9 mm 1,2 mm Weight 67 g Description High grade tool steel, anti-glare finish, ESD safe Needle nose pliers with smooth jaws, very precise. Flat Nose Model 542E L A 120 mm 23 mm B 9 mm E C G Weight 6,5 mm 2,4 mm 1,4 mm 67 g Description High grade tool steel, anti-glare finish, ESD safe Flat nose pliers with smooth jaws. 531E 125 mm 23 mm 9 mm 6,5 mm 5 mm 3 mm 67 g High grade tool steel/Nylon, anti-glare finish, ESD safe Flat nose pliers with replaceable Nylon inserts to prevent nicking e.g. for straightening precious metal, leads, etc. 37 PLIERS Pliers Chain Nose Model 544E L A 120 mm 23 mm B C E G Weight 9 mm 6,5 mm 1 mm 1,4 mm 67 g Description High grade tool steel, anti-glare finish, ESD safe Chain nose pliers with smooth jaws. 544D 125 mm 23 mm 9 mm 6,5 mm 1 mm 1,4 mm 67 g High grade tool steel, anti-glare finish, ESD safe Chain nose pliers with smooth jaws, inside serrated. 546E 125 mm 24 mm 9 mm 6,5 mm 0,8 mm 0,8 mm 67 g <) 60, high grade tool steel, anti-glare finish, ESD safe Chain nose pliers bent with smooth jaws. D = 6,0 mm 38 PLIERS Pliers with Ergonomic Handles* Needle Nose Model 2211P L A 165 mm 35 mm B C 10 mm 5,8 mm E G Weight 1 mm 1,2 mm 80 g Description High grade tool steel, anti-glare finish, ESD safe, Ergonomic Ergonomic needle nose pliers with smooth jaws. Flat Nose Model 2242E L A 160 mm 33 mm B C E G Weight 10 mm 5,8 mm 3,5 mm 1,5 mm 80 g Description High grade tool steel, anti-glare finish, ESD safe, Ergonomic Ergonomic flat nose pliers with long smooth jaws. Precise radiused edges. *Ergonomic features see page 18 39 EROP CUTTERS AND PLIERS EROP Cutters and Pliers EROP Cutters and Pliers The newly introduced EROP range from Erem offers a variety of side cutters and pliers at a budget price. The tools are manufactured from high quality tool steel have a box joint construction, burnished heads, robust opening leaf springs and replaceable soft ESD safe grips. Side Cutters Model EROP355 L 110 mm A 11 mm B 9,5 mm C 7,5 mm Max. Cu Weight o 1,0 mm 61 g Description Semi flush cut, high quality tool steel, burnished, ESD safe Side cutter, tapered head, slim-line. Fine cutting edges for fine work. EROP155 110 mm 13,5 mm 11 mm 7,5 mm o 1,0 mm 72 g Semi flush cut, high quality tool steel, burnished, ESD safe Side cutter, round head. For assembly work on circuit boards, telephone and radio work. EROP419 130 mm 18 mm 11 mm 8 mm o 2,0 mm - g 110 Semi flush cut, high quality tool steel, burnished, ESD safe Side cutter robust. Round head. For general use. EROP357 110 mm 11 mm 9,5 -mm 7,5 mm o 0,6 mm 61 g Semi flush cut, high quality tool steel, burnished, ESD safe Side cutter, tapered head, slim-line. Fine cutting edges for cutting thin wires and cutting tiny components. Tip Cutters Model EROP331 L 120 mm A 12 mm B 12 mm D 7,5 mm Max. Cu Weight o 1,5 mm 81 g Description <) 40, flush cut, high quality tool steel, burnished, ESD safe Tip cutter bent, slim. Ideal for fine works. Exact guidance of cutting edges. 40 EROP CUTTERS AND PLIERS EROP Cutters Model EROP330 L 130 mm A 7,5 mm B 7,5 mm D Max. Cu Weight 5,0 mm o 1,0 mm 84 g Description <) 40, flush cut, high quality tool steel, burnished, ESD safe Tip cutter bent. For PCB applications. EROP Pliers Round Nose Model EROP172 L A B 125 mm 22,5 mm 9,5 mm C 6 mm Eo G Weight 0,8 mm 1,6 mm 63 g Description High quality tool steel, burnished, ESD safe Round nose pliers. Smooth polished inside jaws for bending fine loops. Needle Nose Model EROP174 L A B C E 120 mm 22,5 mm 9,5 mm 6,5 mm 1,5 mm G 2 mm Weight 66 g Description High quality tool steel, burnished, ESD safe Needle nose pliers. Smooth polished inside jaws for gripping fine parts and forming wire. EROP277 140 mm 39 mm 12 mm 7,5 mm 1,2 mm 1,8 mm 90 g High quality tool steel, burnished, ESD safe Needle nose pliers. Serrated, for gripping, holding and forming wires and parts. EROP280 170 mm 64 mm 13,5 mm 8 mm 1,8 mm 2 mm 113 g High quality tool steel, burnished, ESD safe Needle nose pliers long. Oval pointed. Serrated. Robust but fine tips for work in confined areas. 41 STRIPPING TOOLS EROP Pliers Flat Nose Model EROP170 L A B 120 mm 22,5 mm 9,5 mm C 6 mm E 3 mm G 1,2 mm Weight 63 g Description High quality tool steel, burnished, ESD safe Flat nose pliers. Slim smooth jaws for delicate work. EROP171 120 mm 22,5 mm 9,5 mm 6 mm 4 mm 1,2 mm 67 g High quality tool steel, burnished, ESD safe Flat nose pliers. Slim smooth jaws for delicate work. With larger gripping area. Stripping Tools High Precision Stripping Tools Erem stripping tools are the most precise tools used in the electronic or aviation field. They are manufactured from high grade tool steel to ensure durability. To ensure that you have the correct tool for your application, send us samples of your wire and we will make recommendations. Front Stripping Model 510AE 42 L A 120 mm 21 mm E G H Wire o Weight 5 mm 4 mm 7 mm 0,25 1,02 mm (AWG 30 - 18) 75 g Description High grade tool steel, anti-glare finish, ESD safe Front stripping tool. Adjustable for different diameters. Diameter adjustable with screw. With interchangeable side cutting blade. For all kind of insulation and fibre optic outer jackets. STRIPPING TOOLS Stripping Tools Model 552E L 120 mm A 23 mm E 6,5 mm F 1 mm G 11 mm H 9 mm Wire o Weight 0,06 - 80 g 0,25 mm (AWG 42-30) Description Wire o Weight Description 0,06 0,25 mm (AWG 42-30) 80 g High grade tool steel, anti-glare finish, ESD safe, high precision 0,25 mm (AWG 30) 67 g High grade tool steel, anti-glare finish, ESD safe, high precision Front stripping tool. Unique high precision tool. Strips one size at a time without scratching the cores. For all kind of insulation,PTFE,, Tefzel, fibre optics or stranded wires. Diameter adjustable with screw plus stop screw. Replaceable cutting blades. Supplied with screwdriver and hex key. Side Stripping Model 552S 502E30 L A E F G H 120 mm 21 mm 6,5 mm 6,7 mm 11 mm 9 mm 120 mm 22 mm 3 mm 6,3 mm 2,4 mm 5 mm Side stripping tool. Unique high precision tool. Strips one size at a time without scratching the cores. For all kind of insulation,PTFE,, Tefzel, fibre optics or stranded wires. Diameter adjustable with screw plus screw stop. Replaceable cutting blades. Supplied with screwdriver and hex key. High grade tool steel, anti-glare finish, ESD safe Combination side stripping tool. Fine replaceable cutting blades. Strips resistant insulations such as PTFE,, Tefzel, glass reinforced Fluoropolymere. This tool combines stripping, cutting and bending/gripping. For one specific wire diameter, AWG 30 (0,25 mm). Other diameters on request. Special Stripping Model 520E L A D Wire o Weight 120 mm 10 mm 11 mm 0,25 - 1,3 mm (AWG 30-16) 75 g Description High grade tool steel, anti-glare finish, ESD safe, high precision Strips one or several wires simultaneously. Particularly designed for mini or standard wire-wrapping work. Diameter adjustable with screw plus blocking nut. A D 43 PRE-FORMING TOOLS Pre-Forming Tools Pre-Forming Tools Erem offers preforming tools for active and passive components. For Passive Components Model 554E L A D E F Weight 120 mm 13 mm 10 mm 10 mm 10 mm 70 g Description High grade tool steel, anti-glare finish, ESD safe Bending pliers for component leads, etc. U-shape. Max. lead o: Diodes: 0,65 mm Capacitors: 0,7 mm Resistors: 1/2 W 554A 120 mm 23 mm 5,6 mm 4 mm 4,5 mm 70 g High grade tool steel, anti-glare finish, ESD safe Bending pliers for component leads, etc. U-shape. Axial forming action. Max. lead o: Diodes: 0,65 mm Capacitors: 0,7 mm Resistors: 1/2 W 554B 120 mm 23 mm 5,6 mm 2,5 mm 4,5 mm 70 g High grade tool steel, anti-glare finish, ESD safe Bending pliers with tapered nose. For component leads, etc. U-shape. Axial forming action. Max. lead o: Diodes: 0,65 mm Capacitors: 0,7 mm Resistors: 1/2 W 44 PRE-FORMING TOOLS Pre-Forming Tools Model 554TX L 120 mm A 20 mm D 6,5 mm E 6,5 mm F 4 mm Weight 70 g Description High grade tool steel, anti-glare finish, ESD safe Bending pliers for forming stress reliefs. One lead left, one lead right in one single operation. For stable insertion. Max. lead o: Diodes: 0,65 mm Capacitors: 0,7 mm Resistors: 1/2 W 50788 120 mm 23 mm - 4 mm 3 mm 67 g High grade tool steel, anti-glare finish, ESD safe, cut + bend Bending pliers. Cuts and bends leads of popular radial components to a specific length. Max. lead o: Diodes: 0,65 mm Capacitors: 0,7 mm Resistors: 1/2 W 50789Z 120 mm 23 mm 3,3 mm 3,5 mm - 67 g High grade tool steel, anti-glare finish, ESD safe, cut + bend Bending pliers. Cuts and bends leads of various types of components. Max. lead o: Diodes: 0,65 mm Capacitors: 0,7 mm Resistors: 1/2 W 45 PRE-FORMING TOOLS Pre-Forming Tools Pre-Forming Tools for Active Components For Active Components Model 500103A 500210E 500104A 500104AI L 120 mm 120 mm 120 mm 120 mm K max. 15 mm M 3-12 mm I - max. 11 mm 3,8-15 mm max. 13 mm 3,5-15 mm 2,54 mm max. 13 mm 3,5-15 mm 2,54 mm Weight 85 g Description High grade tool steel, anti-glare finish, ESD safe High precision preforming tool. Bends flat parts, contacts, power transistors, triac leads, etc. to a right angle. Adjustable with screw. - 85 g High grade tool steel, anti-glare finish, ESD safe, cut + bend High precision preforming tool. Improved version of 500103A. Cuts and bends TO series, power transistor, LEDs, etc. simultaneously at 90 without stressing the component. Simple adjustment (M) and replaceable cutting blade. 85 g 3 leads, high grade tool steel, anti-glare finish, ESD safe High precision preforming tool for 3 leads. Bends TO 126, 218, 220, power transistor leads, etc. at 90 in two rows. Adjustable (M) with screw. 85 g 3 leads, high grade tool steel, anti-glare finish, ESD safe, central lead backwards High precision preforming tool for 3 leads. Bends TO 126, 218, 220, power transistor leads, etc. at 90 in two rows. Adjustable (M) with screw. Central lead backwards. 46 PRE-FORMING TOOLS Pre-Forming Tools For Active Components Model 500154A 500154AI L 120 mm 120 mm K max. 13 mm M I Weight 4,5-9,5 mm 2,54 mm 90 g max. 13 mm 4,5-9,5 mm 2,54 mm Description 5 leads, high grade tool steel, anti-glare finish, ESD safe High precision preforming tool for 5 leads.. Bends TO 126, 218, 220, power transistor leads, etc. at 90 in two rows. Adjustable (M) with screw. 90 g 5 leads, high grade tool steel, anti-glare finish, ESD safe, opposite leads backwards High precision preforming tool for 5 leads.. Bends TO 126, 218, 220, power transistor leads, etc. at 90 in two rows. Adjustable (M) with screw. Opposite leads backwards. For Flat Packs, Quads Model L A K M Weight 80013C 120 mm 17 mm max. 13 mm 2,8 mm 100 g Description High grade tool steel, anti-glare finish, ESD safe High precision preforming tool. For flat packs, quads, etc. No friction effect. Designed after MIL specs. Cuts + bends. For DIL / IC Model L E F Weight 809IC 120 mm 25 mm 0,9 mm 98 g Description High grade tool steel, anti-glare finish, ESD safe High precision preforming tool. Cuts and bends DIL pins to a 90 angle in one operation. For up to 20 pin IC. Allows DIL-ICs to go SMT. or 47 IC AND SMD TOOLS IC and SMD Tools IC and SMD Tools Erem IC and SMD tools for inserting, extracting, straightening and cutting of ICs and SMDs Inserting and Extracting Model 505 L 120 mm Model 505C 505E 505A 505BGC 505BG E 20 mm 27 mm 32 mm 36 mm 36 mm Weight - Description High grade tool steel, anti-glare finish, ESD safe Inserting and extracting pliers. Available sizes see chart. Adjustable with screw. Insertion: squeeze IC pins. Extraction: adjust jaws width so that pins stay in the middle of holes. Pins: Width: Straightening Model 508Z L 125 mm A 23 mm E 20 mm G 1 mm Weight 85 g Description 8 pins, high grade tool steel, anti-glare finish, ESD safe Straightening pliers. For multiple DIL / IC leads. Before insertion or after soldering. Laterally (a) or parallel (b). For up to 8 pins. Ideal maintenance tool. (a) 808G 130 mm 23 mm 42 mm (b) 1 mm 120 g 16 pins, high grade tool steel, anti-glare finish, ESD safe Straightening pliers. For multiple DIL / IC leads. Before insertion or after soldering. Laterally (a) or parallel (b). For up to 16 pins. Ideal maintenance tool. (a) 48 (b) IC AND SMD TOOLS IC and SMD Tools Cutting Model 670EP L 110 mm A 10 mm D 3 mm E 2 mm Weight 48 g Description Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable High precision tip cutter. For cutting leads of SMD micro packages up to 0,25 mm or fine pitch components less than 1/20". Cuts pins before heat desoldering. Essential SMD tool. No breakage guarantee. For -pitches below 0,5 mm model 670EPF is necessary. Please supply IC together with order. 593AE 115 mm 20 mm 4 mm - 67 g Flush, high grade tool steel, anti-glare finish, ESD safe, resharpenable High precision tip cutter bent. For cutting DIL leads from the rear. Ideal maintenance tool. Cuts pins before heat desoldering. Trimming Model 509E L A D E F Weight 120 mm 21 mm 3,5 mm 21,5 mm 1,5 mm 74 g Description 8 pins, high grade tool steel, anti-glare finish, ESD safe, trim Trimming pliers. Trims an entire row of 8 pins to the same length. The lead tips are cut flat. For multiple DIL / IC leads. Before insertion or after soldering. 49 FIBRE OPTIC TOOLS Fibre Optic Tools Fibre Optic Tools High precision tools for working on fibre optics. Side Stripping Model 552S L 120 mm A 21 mm E 6,5 mm F 6,7 mm G 11 mm H 9 mm Wire o Weight 0,06 - 80 g 0,25 mm AWG 42 - 30 Description High grade tool steel, anti-glare finish, ESD safe, high precision Side stripping tool. Unique high precision tool. Strips one size at a time without scratching the cores. For all kind of insulation,PTFE,, Tefzel, fibre optics or stranded wires. Diameter adjustable with screw plus screw stop. With replaceable cutting blade. Supplied with screwdriver and hex key. Fixed standard o like 125 on request. Cutting Model L A B C Weight 599FO 115 mm 11,5 mm 10,5 mm 6,5 mm 67 g Description A unique high precision cutter for Kevlar(R) silks Cuts all silks even very close to fibre core. Avoid any other application. 599TFO 115 mm 15 mm 10,5 mm 6,5 mm 67 g Semi flush cut, Tungsten Carbide blades, anti-glare finish, ESD safe Side cutter with Tungsten Carbide blades. For cutting Vectran braided wires, fibre optics, Kevlar and small stainless steel braids. Ask for special application. Holding / Gripping Model L Weight 249SA 130 mm 20 g Description Special stainless steel / PPS, anti-glare finish, non-magnetic, ESD safe, suitable for fibre optics Precision tweezers with serrated grips and synthetic tips (PPS). Heat resistant up to 250C (480F). Resistant to acids and solder. Waterproof, ESD safe. Does not damage fibre optic cores. 50 KITS Kits Kits Erem kits offer a range of popular tweezers, cutters and pliers in different combinations. Kit for SMD Handling L 3900KC 130 mm Width 230 mm Thickness 30 mm Weight 350 g Description Black plastic case, cushioned, ESD safe, consists of: Tweezers 51SA Precision tweezers 115 mm, bent 30 , relieved. Very fine tips. Stainless steel, anti-glare finish, non-magnetic. 102ACA SMD tweezers 115 mm, with angled head and blunted edges to avoid board damaging. For handling of small components. Special stainless steel, anti-glare finish, non-magnetic. 103ACA SMD tweezers 115 mm, with angled head 45 and blunted edges to avoid board damaging. For horizontal handling of small components. Special stainless steel, anti-glare finish, non-magnetic. 150SAMB SMD tweezers 120 mm, bent 40, serrated handles. For gripping small cylindrical parts o 1,2 - 2,5 mm, special stainless steel, anti-glare finish, non-magnetic. 150SAMF SMD tweezers 120 mm, straight, serrated handles. For gripping small cylindrical parts o 1,2 - 2,5 mm, special stainless steel, anti-glare finish, non-magnetic. Model Cutters 670EP High precision tip cutter 110 mm. For cutting leads of SMD micro packages up to 0,25 mm or fine pitch components less than 1/20". Flush cut, high grade tool steel, anti-glare finish, ESD safe. 51 VACUUM MANIPULATOR Vacuum Manipulator Vacuum Manipulator The Erem 3000 series offers a vacuum micro manipulation system for precise handling of tiny components as well as flat parts. For use in mechanical assembly, laboratories, etc. The advantages are: * easy pick up of components or silicon wafers * immediate pick up and release of the parts * full 360 rotating system * direct axial air switch * ergonomic shape reduces hand and wrist fatigue * ESD safe 3200 2040Z / 2044Z / 2041Z 3000 ESD 2052E 3231 3303 / 3305Z / 3310Z / 3315 / 3330 3232 2040Z / 2044Z / 2041Z 3740 (optional) 2052E Housing Model 3000ESD L 140 mm Diameter 10 mm Weight 35 g Description Housing Housing with axial air switch, ergonomic shape, serrated grip area, ESD safe. Professional device. Inserts for Housing 3000ESD Adapter Model 3200 L Weight 25 mm 15 g Description Adapter 360 rotating head for housing 3000ESD. With straight nozzle, stainless steel for direct pick-up or as adapter for suction tips or suction cups. 3231 5 mm 5g Adapter Adapter fix. For use with suction tips series 3300. 3231 3232 52 15 mm total 3g Adapter Can be used with or without tips, fix. Holds either suction cup 2052E or tips 2040Z, 2041Z, 2044Z. VACUUM MANIPULATOR Vacuum Manipulator Suction Tips Straight Model 2040Z Inside o Outside o 0,70 mm 0,15 mm Description Suction tip straight,PTFE, tip For use with rotating head 3200 or fix adapter 3232. Model 2044Z 1,30 mm 0,90 mm Suction tip straight, Polyethylene tip For use with rotating head 3200 or fix adapter 3232. 2041Z 1,40 mm 2,0 mm Suction tip straight, Polyethylene tip For use with rotating head 3200 or fix adapter 3232. Suction Needles Model 3303 Outside o 0,30 mm Inside o Description 0,16 mm Suction needle bent 45, stainless steel For use with fix adapter 3231. 3305Z 0,50 mm 0,25 mm Suction needle bent 45, stainless steel For use with fix adapter 3231. 3310Z 0,65 mm 1,0 mm Suction needle bent 45, stainless steel For use with fix adapter 3231. 3315 1,0 mm 1,5 mm Suction needle bent 45, stainless steel For use with fix adapter 3231. 3330 2,5 mm 3,0 mm Suction needle bent 45, stainless steel For use with fix adapter 3231. Suction Cups Model Diameter o 2052E 4,5 mm Description Suction cup, Silicone rubber For use with rotating head 3200 or fix adapter 3232. 53 VACUUM MANIPULATOR Wafer Handling Wafer Handling . 3503A 3000 WESD 3503B Model 3000WESD Size 140 mm (length) Description Pick-up device Pick-up device for silicon wafers up to 8". ESD-safe. Needs min. -600 mBar vacuum. For use with suction plates 3503A or 3503B. 3503A Insert for vertical pick-up for silicon wafers up to 8" For vertical pick up. Armite suction plate with stainless steel tube, ESD safe. 30 mm 80 mm 20 mm 20 mm O 2,5 mm 3503B Insert for horizontal pick-up for silicon wafers up to 8" 30 mm 73 mm 20 mm O 2,5 mm 54 Stainless steel tubing bent for horizontal pick up. Angles can be determined by customer, no price surcharge. Armite suction plate with stainless steel tube, ESD safe. VACUUM MANIPULATOR Accessories Model 3714Z Description Pump Membrane pump 230V, silent running, air volume 5 l/min, max. vacuum -250 mbar. (not suitable for wafer pick up) 3008ESD Tubing System Tubing system flexible, 1,8 m, ESD safe. 3717 Filter Filter for tubing system 3008ESD. 3740 Table Holder Table holder for 3000ESD and 3000WESD housing (without accessory). Vacuum Kit Model 3000KCESD Size Size Weight 400 x 320 x 105 mm Weight Description Description 2,2 kg Black plastic case, cushioned, consists of: 3000ESD Housing 3200 Head / adapter rotating 3231 Adapter fixed 3305Z, 3310Z, 3315 Suction needles bent 2052E suction cup o 4,5 mm KDS 260L suction cup o 9,5 mm 3740 Table holder for 3000ESD 3714Z Membran pump 230 V 3008ESD Tubing system 1,8 m 3717 Air filter 102ACA SMD tweezers 115 mm Content subject to change without prior notice. 55 NOTES 56 NOTES 57 INDEX Index Tweezers Model Page 024C . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Model Page 51SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 51SASL . . . . . . . . . . . . . . . . . . . . . . . . . . .9 52ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11 53CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 1SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 64SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 65ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .10 2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 2ASARU . . . . . . . . . . . . . . . . . . . . . . . . .11 2ASASL . . . . . . . . . . . . . . . . . . . . . . . . . .11 2ASASLT . . . . . . . . . . . . . . . . . . . . . . . . .11 2SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 3CBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3CSASL . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3CTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 3SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 4SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5ASASL . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5BSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5FSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5MBS . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 91SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Model Page OOBSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OOCSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OODSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OOSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OOSASL . . . . . . . . . . . . . . . . . . . . . . . . . .6 RRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 SSSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 SSSASL . . . . . . . . . . . . . . . . . . . . . . . . . . .7 102ACA . . . . . . . . . . . . . . . . . . . . . . . . .12 102ACAX . . . . . . . . . . . . . . . . . . . . . . . .12 103ACA . . . . . . . . . . . . . . . . . . . . . . . . .12 140SA . . . . . . . . . . . . . . . . . . . . . . . . . . .14 141SAP . . . . . . . . . . . . . . . . . . . . . . . . . .14 141SAPH . . . . . . . . . . . . . . . . . . . . . . . . .14 150SA . . . . . . . . . . . . . . . . . . . . . . . . . . .13 150SAD . . . . . . . . . . . . . . . . . . . . . . . . . .12 150SAMB . . . . . . . . . . . . . . . . . . . . . . . .13 150SAMF . . . . . . . . . . . . . . . . . . . . . . . .12 151SA . . . . . . . . . . . . . . . . . . . . . . . . . . .13 249SA . . . . . . . . . . . . . . . . . . . . . . . . .7, 50 249CER . . . . . . . . . . . . . . . . . . . . . . . . . . .7 258SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 500ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14 600ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14 600JSA . . . . . . . . . . . . . . . . . . . . . . . . . .14 608ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14 7SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 7SASL . . . . . . . . . . . . . . . . . . . . . . . . . . .10 940AS . . . . . . . . . . . . . . . . . . . . . . . . . . .13 11N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 15AGS . . . . . . . . . . . . . . . . . . . . . . . . . . .15 15AGW . . . . . . . . . . . . . . . . . . . . . . . . . .15 20AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 21SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 24SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 25SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 29SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 29W30 . . . . . . . . . . . . . . . . . . . . . . . . . .15 29Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 30SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 32BSA . . . . . . . . . . . . . . . . . . . . . . . . . . .13 32BSA20 . . . . . . . . . . . . . . . . . . . . . . . . .13 32BSA25 . . . . . . . . . . . . . . . . . . . . . . . . .12 39SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 40SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 58 AAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 AASA . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 AASASL . . . . . . . . . . . . . . . . . . . . . . . . . . .7 AASSL . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 AAZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ACSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 E2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11 E3CSA . . . . . . . . . . . . . . . . . . . . . . . . . . .11 E5SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 E7SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 EOOSA . . . . . . . . . . . . . . . . . . . . . . . . . .11 M4AS . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 M5S . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Suffix None carbone steel E (Prefix) ergonomic handles M Brass, soft material to avoid damage, no sparks N Nickel-Silver alloy, absolut nicht PYR Pyroplast coating RU anti adhesive coating S stainless steel SA, CA special stainless steel, non-magnetic, acid resistant SL economy version TA Titanium, non-magnetic, lightweight, high temperature resistant Z Nickel plated INDEX Index Cutters and Pliers Model Page 147A . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 500108 . . . . . . . . . . . . . . . . . . . . . . . . . .36 500103A . . . . . . . . . . . . . . . . . . . . . . . . .46 500104A . . . . . . . . . . . . . . . . . . . . . . . . .46 500104AI . . . . . . . . . . . . . . . . . . . . . . . .46 500154A . . . . . . . . . . . . . . . . . . . . . . . . .47 500154AI . . . . . . . . . . . . . . . . . . . . . . . .47 500210E . . . . . . . . . . . . . . . . . . . . . . . . .46 502E30 . . . . . . . . . . . . . . . . . . . . . . . . . .43 503ET . . . . . . . . . . . . . . . . . . . . . . . . . . .30 503ET . . . . . . . . . . . . . . . . . . . . . . . . . . .30 503ETF . . . . . . . . . . . . . . . . . . . . . . . . . .30 504AE . . . . . . . . . . . . . . . . . . . . . . . . . . .30 505A/BG/BGC/C/E . . . . . . . . . . . . . . . . . .48 50788 . . . . . . . . . . . . . . . . . . . . . . . . . . .45 50789Z . . . . . . . . . . . . . . . . . . . . . . . . . .45 508Z . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 509E . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 510AE . . . . . . . . . . . . . . . . . . . . . . . . . . .42 511E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 512E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 512N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 520E . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 521E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 522E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 522N . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 530E . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 530E15A . . . . . . . . . . . . . . . . . . . . . . . . .36 530S . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 531E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 532N . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 542E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 543E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 544D . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 544E . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 546E . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 547 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 549E . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 552E . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 552S . . . . . . . . . . . . . . . . . . . . . . . . .43, 50 554A . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 554B . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 554E . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 554TX . . . . . . . . . . . . . . . . . . . . . . . . . . .45 555E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 570E . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 572E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 573E . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 573EB . . . . . . . . . . . . . . . . . . . . . . . . . . .36 575E . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 576TX . . . . . . . . . . . . . . . . . . . . . . . . . . .26 576Z . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 577E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 582E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 582EW . . . . . . . . . . . . . . . . . . . . . . . . . .31 592E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 593AE . . . . . . . . . . . . . . . . . . . . . . . .31, 49 595E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 595T . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 595TF . . . . . . . . . . . . . . . . . . . . . . . . . . .25 597E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 599E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 599FO . . . . . . . . . . . . . . . . . . . . . . . . . . .50 599T . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Model Page 599TF . . . . . . . . . . . . . . . . . . . . . . . . . . .23 599TFO . . . . . . . . . . . . . . . . . . . . . . .23, 50 611E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 612E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 612N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 622N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 622NA . . . . . . . . . . . . . . . . . . . . . . . . . .24 622NB . . . . . . . . . . . . . . . . . . . . . . . . . . .25 632N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 632NCF . . . . . . . . . . . . . . . . . . . . . . . . . .26 670E . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 670EP . . . . . . . . . . . . . . . . . . . . . . . .32, 49 670EPF . . . . . . . . . . . . . . . . . . . . . . .32, 49 676E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 677E . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 710E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 776E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 792E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Model Page 3305Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3310Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3315 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3330 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3503A . . . . . . . . . . . . . . . . . . . . . . . . . . .54 3503B . . . . . . . . . . . . . . . . . . . . . . . . . . .54 3714Z . . . . . . . . . . . . . . . . . . . . . . . . . . .55 3717 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 3740 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 3900KC . . . . . . . . . . . . . . . . . . . . . . . . . .51 EROP155 . . . . . . . . . . . . . . . . . . . . . . . . .40 EROP170 . . . . . . . . . . . . . . . . . . . . . . . . .42 EROP171 . . . . . . . . . . . . . . . . . . . . . . . . .42 EROP172 . . . . . . . . . . . . . . . . . . . . . . . . .41 EROP174 . . . . . . . . . . . . . . . . . . . . . . . . .41 EROP277 . . . . . . . . . . . . . . . . . . . . . . . . .41 EROP280 . . . . . . . . . . . . . . . . . . . . . . . . .41 EROP330 . . . . . . . . . . . . . . . . . . . . . . . . .41 EROP331 . . . . . . . . . . . . . . . . . . . . . . . . .40 EROP355 . . . . . . . . . . . . . . . . . . . . . . . . .40 EROP357 . . . . . . . . . . . . . . . . . . . . . . . . .40 EROP419 . . . . . . . . . . . . . . . . . . . . . . . . .40 80013C . . . . . . . . . . . . . . . . . . . . . . . . . .47 808G . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 809IC . . . . . . . . . . . . . . . . . . . . . . . . . . .47 812N . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 822N . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 884E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 884EPCM . . . . . . . . . . . . . . . . . . . . . . . .27 886E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 896E . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 1500BSF . . . . . . . . . . . . . . . . . . . . . . . . .34 1503N . . . . . . . . . . . . . . . . . . . . . . . . . . .35 1512N . . . . . . . . . . . . . . . . . . . . . . . . . . .34 1522N . . . . . . . . . . . . . . . . . . . . . . . . . . .34 1522NA . . . . . . . . . . . . . . . . . . . . . . . . .35 1522NB . . . . . . . . . . . . . . . . . . . . . . . . . .35 2040Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2041Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2044Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2052E . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2211P . . . . . . . . . . . . . . . . . . . . . . . . . . .39 2212E . . . . . . . . . . . . . . . . . . . . . . . . . . .27 2222E . . . . . . . . . . . . . . . . . . . . . . . . . . .27 2222EA . . . . . . . . . . . . . . . . . . . . . . . . . .28 2222EB . . . . . . . . . . . . . . . . . . . . . . . . . .28 2232E . . . . . . . . . . . . . . . . . . . . . . . . . . .27 2242E . . . . . . . . . . . . . . . . . . . . . . . . . . .39 2282E . . . . . . . . . . . . . . . . . . . . . . . . . . .33 3000ESD . . . . . . . . . . . . . . . . . . . . . . . . .52 3000KCESD . . . . . . . . . . . . . . . . . . . . . . .55 3000WESD . . . . . . . . . . . . . . . . . . . . . . .54 3008ESD . . . . . . . . . . . . . . . . . . . . . . . . .55 3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 3231 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 3232 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 3303 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 59 SIDE CUTTERS Round Head 60 G E R M A N Y G R E A T Cooper Tools GmbH Carl-Benz-Str. 2 74354 Besigheim Tel: (07143) 580-0 Fax: (07143) 580-108 Cooper Tools LtD. Suite 15, Coniston House Town Centre Washington, Tyne & Wear NE38 7RN Tel: (0191) 419 7700 Fax: (0191) 417 9421 B R I T A I N F R A N C E I T A L Y S W I T Z E R L A N D Cooper Tools S.A. 25 Rue Maurice Chevalier BP 46 77832 Ozoir-la-Ferriere Cedex Tel: (01) 60.18.55.40 Fax: (01) 64.40.33.05 Cooper Italia S.p.A. Viale Europa 80 20090 Cusago (MI) Tel: (02) 9033101 Fax: (02) 90394231 Erem S.A. Rue de la Roseliere 8 1400 Yverdon les Bains Tel: (024) 426 12 06 Fax: (024) 425 09 77 (c) 2004, Cooper Industries, Inc. Specifications subject to change without notice. 005 56 851 00 / 03.04 WAL 5.0