00DSA - EREM - Datasheet.Live

Electronics Pliers, Cutters and Tweezers

Cooper Hand Tools

Page

Tweezers 4-16

Pointed Tips 5-10

Flat Round Tips 10-11

Tweezers with Ergonomic Handles 11

SMD Tweezers 12-13

Special Gripping Tweezer 13

Wafer Tweezers 14

Cutting Tweezers 15

Stripping Tweezers 15

Extraction Tweezers/Connector Tools 16

Cutters 17-36

Side Cutters 21-27

Side Cutters with Ergonomic Handles 27-28

Tip Cutters 29-33

Tip Cutters with Ergonomic Handles 33

Pneumatic Side Cutters and Tip Cutters 34-35

Distance Cutters 36

Pliers 37-39

EROP Cutters and Pliers 40-42

Stripping Tools 42-43

Pre-Forming Tools 44-48

For Passive Components 44-45

For Active Components 46-48

IC and SMD Tools 48-49

Inserting and Extracting 48

Straightening 48

Cutting + Trimming 49

Fibre Optic Tools 50

Kits 51

Vacuum Manipulator 52-55

Index 58-59

Content

....................................................................................... ..............

Erem Tools - Precision Made in Switzerland

Precision is sought by many but achieved by few. The quality and perfor-

mance of Erem hand tools is the result of more than 25 years of research

and manufacturing expertise. Erem is constantly innovating and developing

new tools for use in areas as diverse as electronics, aviation, biology, medical

(cardio-vascular, cannulae applications), watch and clock industry, telecoms.

Although your initial investment in Erem tools may be higher than some

other tools, the final cost based on medium to long term use will be lower

due to the economy resulting from the quality of the tools and in the

case of the cutters, the free of charge resharpening. The inhe-

rent precision of the tools will be reflected in the quality

of your products.

Erem Tweezers

Erem tweeezers are high precision tools of constant high quality. Precise

finished and symmetrical tips together with easy handling and perfect

balance makes them outstanding tools. The range of Erem tweezers covers

a wide diversity of applications. It is produced in many shapes and can be

manufactured from different materials. The most popular models are avai-

lable in a lower cost economy (SL) range. In all models,

the type number of the tweezers is stamped, not printed.

The Material

Erem offers a wide variety of materials, carbon steel, stainless steel, Erem

special stainless steel, Nickel plated, Brass or Titanium. The most common ones‘

are explained below:

Carbon Steel

Carbon steel tweezers have hard tips but the rust resistance is low and they

are magnetic. Carbon steel tweezers have no suffix.

Stainless Steel

Tweezers from stainless steel have strong tips and are rust resistant but are not

as hard and longlasting as carbon steel tweezers. Stainless steel tweezers have the suffix „S“.

Erem Special Stainless Steel

This grade of steel is a non magnetic, rust resistant, anti acid alloy.

It is temperature resistant up to 300°C.

Tweezers from special stainless steel have the suffix „SA“

Coating

The Pyroplast coating is an exclusive by Erem. The advantages are:

- heat resistance up to 500°C (932°F), almost twice as much as PTFE, Cralon, etc.

- no capillary effect on tips while soldering (non-stick property)

- no contamination caused by positive or negative charge

- hydrophobic

- radiation resistant

- thickness 60-80 µ

the suffix is „PYR“.

Note: The Pyroplast coating is not available for all Erem tweezers. It is made to order

and needs a minimum order quantity. Please ask for further information.

Ergonomic

Developed by Erem, tweezers with ergonomically shaped handles to alleviate the problem

of Repetitive Strain Injuries (RSI) and reduce operator fatigue. The range has been

selected to include the most popular tip shapes (see page 11). The main features are:

- ergonomic design for operator comfort and ease of control

- two colour, thermally insulated soft grip handles moulded from a synthetic material

- ESD safe

- the grips absorb heat for additional user protection

- manufactured from non magnetic, acid resistant, stainless steel alloy

- supplied in a rigid, transparent plastic box for protection and storage

The prefix for ergonomic tweezers is “E”.

Suffix

None carbon steel

E (Prefix) ergonomic handles

MBrass, soft material to avoid damage, no sparks

NNickel-Silver alloy

PYR Pyroplast coating

RU anti adhesive coating

Sstainless steel

SA, CA special stainless steel, non-magnetic, acid resistant

SL economy version

TA Titanium, non-magnetic, lightweight, high temperature resistant

ZNickel plated

Stainless steel, anti-glare finish

Precision tweezers with long tips for delicate circuit board

assembly.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers for delicate circuit board assembly.

Special stainless steel, anti-glare finish, non-magnetic

Same as 3CSA but economy model.

Titanium, non-magnetic

Same as 3CSA but Titanium for heat resistance and light weight.

110 mm

11 g

8 g

11 g

3CS

3CSA

3CSASL

3CTA

53CSA Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with crush-proof design for handling

of delicate parts.

108 mm

16 g

12 g

ACSA

20AS Stainless steel, anti-glare finish

Precision tweezers with serrated grips and inside serrated tips

for anti-slip handling. Guide pin to avoid tip overlapping.

For bending and handling.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with serrated grips for anti-slip handling. For

bending and handling.

Pointed Tips Straight

PRECISION TWEEZERS

Length 80 mm

Length 108 mm

Pointed Tips Straight

Main applications:

for conventional and preci-

sion handling of small parts

like tissue, components,

wires. For tasks in micro

electronics industry, medici-

ne, laboratories and other

applications where high

precision is required.

Model Length Weight Description

Length 110 mm

80 mm 6 g

M5S Stainless steel, anti-glare finish

Micro tweezers, very small, very fine tips, e.g. for work under

microscope

Model Length Weight Description

125 mm 16 g

AAS Stainless steel, anti-glare finish

Precision tweezers with strong but fine tips. For universal use.

120 mm

14 g

20 g

18 g

20 g

17 g

16 g

3SA

3SASL

1SA

1SASL

OOSA

OOSASL

OOCSA

OOBSA

OODSA

64SA

11N

AAZ

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers for micro electronics. Precision work.

Special stainless steel, anti-glare finish, non-magnetic

Same as 3SA but economy model.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers for general use.

Special stainless steel, anti-glare finish, non-magnetic

Same as 1SA but economy model.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers for general purpose e.g. electronic assembly,

very sturdy.

Special stainless steel, anti-glare finish, non-magnetic

Same as 00SA but economy model.

Special stainless steel, anti-glare finish, non-magnetic

Same as 00SA but smaller version.

Special stainless steel, anti-glare finish, non-magnetic

Same as 00SA but with serrated grips.

Special stainless steel, anti-glare finish, non-magnetic

Same as 00SA but with serrated grips and inside serrated tips.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with serrated grips.

Nickel-Silver alloy, anti-glare finish, non-magnetic

Precision tweezers Nickel-Silver alloy, perfect non-magnetic.

Nickel plated

Precision tweezers Nickel plated, for electronics assembly.

Pointed Tips Straight

Length 120 mm

Length 125 mm

PRECISION TWEEZERS

Model Length Weight Description

125 mm 16 g

AASSL Stainless steel, anti-glare finish

Same as AAS but economy model.

21SA 160 mm 23 g Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers, long version, with serrated grips and inside ser-

rated tips, strong.

150 mm 26 g

29SA Special stainless steel, anti-glare finish, non-magnetic,

reverse action

Precision tweezers with fibre-grip handles for heat

protection. Reverse action for permanent holding parts.

Stainless steel, anti-glare finish

Precision tweezers, long version, very strong.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with narrow grips and low tension. Extra long

for use near heat, die attachment.

Special stainless steel, anti-glare finish, non-magnetic

Same as SSSA but economy model.

140 mm

30 g

11 g

RRS

SSSA

SSSASL

130 mm 20 g

249SA

130 mm 24 g

249CER

125 mm

16 g

17 g

AASA

AASASL

Pointed Tips Straight

PRECISION TWEEZERS

Model Length Weight Description

Length 130 mm

Length 140 mm

Model Length Weight Description

Length 150 mm

Model Length Weight Description

Length 160 mm

Model Length Weight Description

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with strong but fine tips. For universal use.

Special stainless steel, anti-glare finish, non-magnetic

Same as AASA but economy model.

Brass, polished

Precision tweezers brass. Soft metal protects sensitive

parts against damage. No sparks.

Special stainless steel / PPS, anti-glare finish, non-

magnetic ESD safe, suitable for fibre optics

Precision tweezers with serrated grips and synthetic tips (PPS).

Heat resistant up to 250°C (480°F). Resistant to acids and solder.

Waterproof, ESD safe. Does not damage fibre optic cores.

Special stainless steel / Ceramic anti-glare finish, non-

magnetic

Same as 249SA but with Ceramic tips for heat resistance

up to 900°C (1500°F).

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with very fine tips e.g. for handling fine wires.

Special stainless steel, anti-glare finish, non-magnetic

Same as 5SA but economy model

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with medium tips.

Special stainless steel, anti-glare finish, non-magnetic

Same as 2SA but economy model.

115 mm 12 g5MBS

115 mm

12 g

16 g

5FSA

5SA

5SASL

2SA

2SASL

Stainless steel, anti-glare finish

Precision tweezers with extremely fine tips (~ 0,03 x 0,07 mm)

for use in dissection procedures and handling of very small

samples e.g. under microscope. Only for use with soft materials.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with extremely fine tips (~ 0,05 x 0,1 mm)

for use in dissection procedures and handling of very small

samples e.g. under microscope. Only for use with soft materials.

90 mm 9 g

M4AS Stainless steel, anti-glare finish

Micro tweezers with very small, very fine tips, e.g. for working

under microscope or handling tiny parts in HF assembly. Strong tips

due to hardened stainless steel.

110 mm

13 g

4SA

4SASL

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with very fine points..

Special stainless steel, anti-glare finish, non-magnetic

Same as 4SA but economy model.

Pointed Tips Straight Relieved

Main application:

for better product visibility

e.g. under microscope or

working in confined areas,

for handling tiny components.

Length 90 mm

PRECISION TWEEZERS

Model Length Weight Description

Length 110 mm

Model Length Weight Description

Length 115 mm

Model Length Weight Description

)30°, special stainless steel, anti-glare finish,

non-magnetic

Precision tweezers curved, relieved.

)30°, special stainless steel, anti-glare finish,

non-magnetic

Precision tweezers curved, relieved.

)30°, special stainless steel, anti-glare finish,

non-magnetic

Precision tweezers curved, relieved. Very fine tips.

)30°, special stainless steel, anti-glare finish,

non-magnetic

Same as 51SA but economy model.

)15°, special stainless steel, anti-glare finish,

non-magnetic

Precision tweezers oblique, relieved. Fine tips.

)15°, special stainless steel, anti-glare finish,

non-magnetic

Same as 5 ASA but economy model.

115 mm

12 g

5CSA

5BSA

51SA

51SASL

5ASA

5ASASL

3CBS 110 mm 11 g <

)40°, stainless steel, anti-glare finish

Precision tweezers bent for delicate circuit board assembly.

258SA 120 mm 15 g

Pointed Tips Straight Relieved

PRECISION TWEEZERS

Length 120 mm

Length 110 mm

Model Length Weight Description

Pointed Tips Bent

Model Length Weight Description

Length 115 mm

Model Length Weight Description

Pointed Tips Bent

Main application:

for better product visibility

and handling e.g. working

in confined areas and under

microscope.

Special stainless steel/PPS, anti-glare finish, non-

magnetic, ESD safe

Precision tweezers with serrated grips and synthetic tips (PPS).

Heat resistant up to 250°C (480°F). Resistant to acids and solder.

Waterproof, ESD safe.

120 mm 15 g2ASA Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with medium tips for gripping.

140 mm 11 g

65ASA

Pointed Tips Bent

PRECISION TWEEZERS

Length 120 mm

Model Length Weight Description

120 mm

15 g

7SA

7SASL

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers curved, relieved.

For easy handling in confined areas.

Special stainless steel, anti-glare finish, non-magnetic

Same as 7SA but economy model.

Length 150 mm

Model Length Weight Description

150 mm

22 g

26 g

24SA

30SA

)40°, special stainless steel, anti-glare finish, non-magnetic

Precision tweezers bent. Serrated grips and inside serrated tips.

Alignment pin. Useful for all soldering jobs and assembly.

Length 140 mm

Model Length Weight Description

Length 120 mm

Model Length Weight Description

Flat Round Tips Straight

Main application:

for conventional holding

and gripping applications.

)50°, special stainless steel, anti-glare finish,

non-magnetic, reverse action

Precision tweezers bent. With fibre-grip handles for heat protec-

tion. Reverse action for permanent holding parts. Useful e.g. for

soldering jobs.

)50°, special stainless steel, anti-glare finish,

non-magnetic

Precision tweezers bent. Very fine points.

For handling extra fine components.

120 mm

25 g

30 g

28 g

25 gE5SA

E3CSA

E00SA

E7SA

E2ASA

Special stainless steel, ergonomic handles, non-magnetic,

ESD-safe

Ergonomic precision tweezers straight, very fine tips, e.g. for han-

dling fine wires.

Special stainless steel, ergonomic handles, non-magnetic,

ESD-safe

Ergonomic precision tweezers straight, long fine tips, for delicate

circuit board assembly.

Special stainless steel, ergonomic handles, non-magnetic,

ESD-safe

Ergonomic precision tweezers straight, fine tips, for general use.

Very sturdy.

Special stainless steel, ergonomic handles, non-magnetic,

ESD-safe

Ergonomic precision tweezers curved, fine tips, for easy manipula-

tion in confined areas.

Special stainless steel, ergonomic handles, non-magnetic,

ESD-safe

Ergonomic precision tweezers straight, flat round tips, for gripping.

Flat Round Tips Straight

PRECISION TWEEZERS

Model Length Weight Description

120 mm

15 g

16 g

15 g

2ASASL

2ASASLT

2ASARU

25SA

52ASA

Special stainless steel, anti-glare finish, non-magnetic

Same as 2ASA but economy model.

Special stainless steel/PTFE,coated, anti-glare finish,

non-magnetic

Same as 2ASA but PTFE, coated tips for handling delicate parts.

Special stainless steel/coated, anti-glare finish, non-magnetic

Same as 2ASA but coated tips for handling adhesive parts, gaskets,

Kapton ribbons, labels with negligible capillary effect.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with flat round tips. For gripping.

Special stainless steel, anti-glare finish, non-magnetic

Precision tweezers with crush-proof design for handling

of delicate parts.

Precision Tweezers with Ergomomic Handles*

Model Length Weight Description

Main applications:

Thermally insulated soft

grips, ESD safe, ergonomi-

cally shaped to reduce ope-

rator’s hand fatigue.

Note: colour coatings subject to variations without prior notice. * Ergonomic features see page 4.

45°, special stainless steel, anti-glare finish,

non-magnetic

SMD tweezers with angled head and blunt edges to avoid board

damage. For handling of small components.

115 mm 15 g102ACA

115 mm

14 g

15 g

102ACAX

103ACA

Special stainless steel, anti-glare finish, non-magnetic

SMD tweezers with angled head and blunt edges to avoid board

damage. For handling small components, mounting on SMD boards,

hybrids ICs, watch hands, etc.

Special stainless steel, anti-glare finish, non-magnetic,

reverse action

Same as 102ACA but reverse action.

110 mm

15 g

39SA

40 SA

Ø0,3 mm, special stainless steel, anti-glare finish,

non-magnetic

Straight, serrated grips. For gripping wires and small cylindrical parts.

Ø0,4 mm, special stainless steel, anti-glare finish,

non-magnetic

Straight, serrated grips. For gripping wires and small cylindrical parts.

120 mm 13 g

13 g

150SAMF Ø1,2 – 2,5 mm, special stainless steel, anti-glare finish,

non-magnetic

SMD tweezers straight, serrated grips. For gripping small cylindrical

parts, mini MELFs. Very narrow tips.

Ø1,5 – 3 mm, special stainless steel, anti-glare finish,

non-magnetic

SMD tweezers straight, serrated grips.

For gripping small cylindrical parts.

120 mm150SAD

SMD Tweezers

Angled Head

Main application:

for handling chips or minia-

ture SMD components.

For mounting on SMD

boards or Ceramic substra-

tes.

SMD TWEEZERS

Model Length Weight Description

Rounded Head

Model Length Weight Description

120 mm 17 g940AS Stainless steel, anti-glare finish

Gripping tweezers with locking clip.

For various applications. Resists a tensile force of ~ 5 kg.

115 mm

17 g

13 g

32BSA

32BSA20

32BSA25

150SAMB

45°, Ø5 mm, special stainless steel, anti-glare finish,

non-magnetic

SMD tweezers bent. For small cylindrical components or insulated

fibres.

45°, Ø2 mm, special stainless steel, anti-glare finish,

non-magnetic

Same as 32BSA but Ø2 mm.

45°, Ø2,5 mm, special stainless steel, anti-glare finish,

non-magnetic

Same as 32BSA but Ø2,5 mm.

40°, Ø1,2 - 2,5 mm, special stainless steel, anti-glare

finish, non-magnetic

SMD tweezers bent, serrated grips. For gripping small cylindrical

parts.

13 g Ø3 – 6 mm, special stainless steel, anti-glare finish,

non-magnetic

SMD tweezers straight, serrated grips.

For gripping small cylindrical parts.

120 mm 13 g

150SA Ø1,5 – 3 mm, special stainless steel, anti-glare finish,

non-magnetic

SMD tweezers straight, serrated grips.

For gripping small cylindrical parts.

151SA 120 mm

Rounded Head

SMD TWEEZERS

Model Length Weight Description

Rounded Head Bent

Special Gripping Tweezers

WAFER TWEEZERS

Wafer Tweezers

Main application:

for handling wafers from

3” to 6”. Different coatings

or sizes on request.

125 mm 12 mm

16 mm

7 mm

8 mm

20 mm 8 mm

30 mm 5 mm

30 mm 8 mm

30 mm 8,5 mm

19,5 mm 8 mm

15 g

91SA 3”- 4”, special stainless steel, anti-glare finish,

non-magnetic

Standard wafer tweezers to pick up 3” or 4” Silicon wafers.

Serrated grips.

120 mm 20 g

140SA 4” - 5”, special stainless steel/Polyester, anti-glare finish,

non-magnetic

Wafer tweezers with Delrin tips. Available with adjustable opening

screw. For 4” to 5” wafers. Serrated grips. Temperature resistance

170°C.

150 mm 30 g

141SAP 5”- 6”, special stainless steel/PTFE,, anti-glare finish,

non-magnetic

Wafer tweezers with Polyester tips. The perfect wafer tweezers.

Will not damage Si, GaAs or Ti wafers. Serrated grips.

150 mm 30 g

141SAPH

130 mm

22 g

23 g

24 g

500ASA

600ASA

608ASA

600JSA

4”- 5”, special stainless steel, anti-glare finish,

non-magnetic

Wafer tweezers with fingers to reduce the risk of damage.

For 4” and 5” wafers. Serrated grips.

6”, special stainless steel, anti-glare finish, non-magnetic

Wafer tweezers with fingers to reduce the risk of damage.

For 6” wafers. Serrated grips.

6”, special stainless steel, anti-glare finish, non-magnetic

Same as 600ASA but with 30 mm width.

4”- 6”, special stainless steel, anti-glare finish,

non-magnetic

Wafer tweezers with free-floating PTFE, paddle for self adjust-

ment on 4”- 6” wafers. Serrated grips.

5”- 6”, special stainless steel/Halar, anti-glare finish,

non-magnetic

Same as 141SAP but with Halar coating and plastic tips without

pigmentation. Halar is acids resistant.

Model Length A B Weight Description

120 mm 22 g

29Y

120 mm 28 g

29W30

Stainless steel, anti-glare finish

Miniature stripping tweezers. Serrated grips. Will strip tiny

wires between AWG 42 and 32 (0,06 to 0,20 mm).

Wire samples required.

Stainless steel/fibre handles, anti-glare finish,

reverse action

Stripping tweezers with fibre-grip handles. For standard or PTFE,

wires between AWG 30 and 28 (0,25 mm – 0,3 mm).

Reverse action.

Anti-glare finish

Cutting tweezers with fine oblique head and induction hardened

cutting blades for increasing life time. For soft wires up to Ø0,25 mm.

Anti-glare finish

Cutting tweezers with oblique head. Induction hardened cutting blades

improves cutting capability and life time. For soft wires up to Ø0,25 mm.

115 mm

21 g

26 g

15AGS

15AGW

CUTTING, STRIPPING TWEEZERS

Model Length Weight Description

Cutting Tweezers

Main application:

e.g. for cutting soft wires

on micro electronics circuits,

very precise.

Stripping Tweezers

Main application:

for stripping small wires,

standard or PTFE, insultati-

ons, very precise.

EXTRACTION TWEEZERS

Extraction Tweezers

Main application:

to extract connected wires

from the rear of the

connectors.

120 mm 1,75

2,15

1,9

2,15

8 mm

120 mm

20 g

024C

028

Stainless steel

Extraction tweezers for Sub-D types. For ITT-Canon / TRW CET

20D, Honda connectors, Siemens, Philips, Souriau-Framatome, etc.

Stainless steel

Same as 024C but with thinner nozzle wall for wires with larger

insulations.

Extraction Tweezers

Model Length ØAØB C Weight Description

= Outside Ø

= Inside Ø

Cutters and Pliers

CUTTERS AND PLIERS

Erem cutters and pliers are unique in the degree of qua-

lity, precision, reliability, ergonomy and long life they

offer when compared to other professional tools, for the

following reasons:

Erem cutters and pliers are not forged. They are manufactured from billets of

high grade tool steel, which uses a Swiss developed lamination technique.

It employs a multiple extrusion process to super compact the steel imparting addi-

tional strength and toughness to the tools. This results in reliable and

long lasting tools.

The surfaces between the two halves of the joint are machine finished and in

conjunction with the interlocking precision screw that is used to join both halves

together ensure wobble free operation and eliminates blade overlap which

could cause mechanical shock and damage components.

The return springs are mounted internally in the head of the tools and are gua-

ranteed for 1 million operations. They operate with a constant resistance over

the movement of handles to reduce operator fatigue making them superior to

leaf or coil springs.

The Steel

The Joints

The Springs

Erem Maximum Opening Stop, limits the handle spread by preventing the tips of the

blades from opening more than 5mm. To promote operator comfort and ergonomy.

EMOS

Erem Cutters and Pliers

Cutters and Pliers

CUTTERS AND PLIERS

Erem is able to offer tools for special applications without minimum order quantity.

Dimensioned drawings /and or samples of your application will be required.

1. Spare parts

Erem pliers and cutters and their spare parts are guaranteed against manufacturing

defects. The following parts will be supplied free of charge should a defect be found

- Foam grips

- Springs

- Opening stops

Please contact your local Cooper Hand Tools office for advice on procedure.

2. Resharpening

Erem cutters can be returned to Erem Switzerland for free of charge resharpening.

It is possible to resharpen tools up to three times depending on their condition.

Tools will be returned to you fitted with new handles depending on their shape.

You will be invoiced for transport costs only.

Customer Service

Specials

Ergonomic Handles

MEDIAN

NERVE

CARPAL TUNNEL

CARPAL BONES

MUSCLES AT

BASE OF THUMB

MEDIAN NERVE

TENDONS

Erem Cutters and Pliers with Ergonomic Handles

The Work Related Upper Limb Disorder (WRULD) is a muscular skeletal problem related

to the arm. WRULDS can be caused by positional fatigue or nerve damage caused e.g. by

repetitve use of non ergonomic hand tools, the socalled Repetitive Strain Injuries (RSI).

The ability to grip and hold objects can be impaired. Repetitive movements can cause

compression of the median nerve and produce sensations of pins and needles.

WRULDS is a direct result of companies manufacturing processes and working practices

and will as result detrimental to the quality of a companies products. Therefore a reduc-

tion of the factors which cause WRULDS will improve working practice and product quali-

ty. In fact it is arguable that without quality working practice there can be no quality

product.

To alleviate the problem of RSI and Erem have designed a range of tools with ergonomic

handles.The compound curves of the handles of the Erem ergonomic cutters and pliers

allow the pressure applied to the handles when cutting or gripping to be evenly spread

over the palm of the hand. The thumb and fingers are self- positioned by the handles,

making the tool comfortable for the operator to use and reducing the incidence of

WRULDS.The comfortable foam grips are ESD safe and easily interchangeable.

The following tools are available with ergonomic handles:

- Side Cutters see page 27 – 28

- Tip Cutters see page 33

- Pliers see page 39

Cutters and Pliers

CUTTERS AND PLIERS

The best way to compare the real costs between different hand tools is to consider the

number of cuts - besides the work itself and the performance.The parameters below

indicate how Erem tools - representing a higher initial investment - become even more

economical than lower quality cutters on a medium or long-term basis.

Cost Per Cut Comparison

EMI/RF Erem-Cutters + Pliers

Sources:DOD/CECC

10∞1001051012 1020 Ω/cm2

antistaticconductive insulatingstatic dissip.

ESD Safety

The foam cushion grips are static dissipative and are fitted a standard to all models.

25 50 75 100

100

125 150 175 200 225 250 275 300 325

C12

A = Low-end tools

B = Medium Quality

C = Erem

1,2 = average stages of Erem cutters

needing resharping.

Price

No. of cuts/1.000

503E x

504AE x

555E x

570E x

572E x

573E x

575E x

582E x

582EW x

670E x

1503N x

2282E x

CUTTING CAPABILITIES

Cutting Capabilities

147A x

511E x

512E x

512N x

521E x

522E x

522N x

532N x

576EZ x

577E x

592E x

595E x

597E x

599E x

611E x

612E x

612N x

622N x

622NA x

622NB x

632N x

676E x

677E x

710E x

776E x

792E x

812N x

822N x

884E x

886E x

896E x

1512N x

1522N x

1522NA x

1522NB x

2212E x

2222E x

2222EA x

2222EB x

2232E x

ø0,1-0,6 ø0,6-1,2 ø>1,2

SF F FF

max. Cu (Copper)

mm Cut*Side Cutters*

Model

ø0,1-0,6 ø0,6-1,2 ø>1,2

SF F

max. Cu (Copper)

mm Cut*Tip

Cutters*

Model

= Semi Flush

= Flush

= Erem Super Full Flush

Description see page 21

*Note: There is no max. Cu indication for Tungsten Carbide cutters. Please ask for the

according cutting capabilities.

Side Cutters

SIDE CUTTERS

Side Cutters

Erem offers a wide range of precision side cutters.

To establish which cutter is correct for your application

follow the steps below

Oval Head

The most common head shape. For standard cutting applications where access is not the

problem.

Tapered Head

For cutting tasks where easier access is required. The tapered head shape allows better

tip access than the oval head but without much reducing the cutting capability.

Relieved Head

For cutting in confined areas. This is the smallest head shape available. One side is cut

away for access even in confined areas. Due to the cut away the cutting capability is

reduced. Flush tip cutting.

Head Form

Cut

Size

110 mm Small short head for increased cutting resistance.

For almost all cutting applications.

115 mm Longer and finer head.

For cutting applications where easy access is more important than a high cutting capacity.

120 mm Strong version.

For all cutting applications where high cutting capacity is required.

Semi Flush

These blades allow a very high resistance. Will cut from tip to heel, malleable wires like

Copper as well as hard wires. Leaves a pinch at the end of the wire. For all applications

where the cutting type is not so important.

Flush

Allows a flat cut with the same cutting capacities. The edge

of the wire is cut off flat. Thanks to faster penetration into

the component the operator’s effort is substantially redu-

ced. No solder spikes after using wave soldering process.

Super Full Flush

An Erem exclusivity. This absolute full flush cut leaves a

perfect flat surface on cut leads It prevents any pinching

of leads. Flat, clean cut. No cutting rework after soldering.

Soft wires only.

1 2

1. Erem Cut 2. Others

Cutting safety device, holds wire scraps.

Can be adapted on all side cutters series 500, 600 and 2200.

Add “W” when ordering, e.g. 595EW

Safety Lead Device

115 mm 10 mm 10,5 mm ø1,6 mm 67 g Semi flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter for universal use. Medium size.

Economical line.

512N 6,5 mm

110 mm 9 mm 9 mm ø1,25 mm 48 g Semi flush cut, high grade tool steel,

burnished, ESD safe, resharpenable

Miniature side cutter.

Economical line. Small head.

612N 6 mm

110 mm 9 mm 9 mm ø1,5 mm 48 g Semi flush cut, high grade tool steel,

burnished, ESD safe, resharpenable

Miniature side cutter. Small head.

611E 6 mm

110 mm 10,5 mm 9 mm ø1,5 mm 48 g Semi flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Miniature side cutter. Standard head width.

612E 6 mm

110 mm 9 mm 9 mm ø1,25 mm 48 g Flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Miniature side cutter. Economical line. Small head.

622N 6 mm

110 mm 9 mm 9 mm ø1,25 mm 48 g Super full flush cut, high grade tool steel, anti-

glare finish, ESD safe, resharpenable

Miniature side cutter. Economical line. Small head.

Perfect full flush cut. Soft wires only.

632N 6 mm

110 mm 8,8 mm 9 mm ø1,0 mm 48 g Super full flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Miniature side cutter. Standard head width.

Perfect full flush cut. Soft wires only.

710E 6 mm

Oval Head

SIDE CUTTERS

Description

Length 110 mm

Length 115 mm

Oval Head

Main application:

standard cutting applications.

Model L A B C Max. Cu Weight

Model L A BC Max. Cu Weight Description

Description

Oval Head

SIDE CUTTERS

Model L A B C Max. Cu Weight Description

115 mm 10 mm 10,5 mm ø1,2 mm 67 g Flush cut, high grade tool steel, polished head,

ESD safe, resharpenable

Side cutter for universal use. Medium size.

521E

522N

6,5 mm

115 mm 10 mm 10,5 mm ø1,6 mm 67 g Flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter for universal use. Medium size. Economical line.

6,5 mm

115 mm 12 mm 10,5 mm ø1,2 mm 67 g Flush cut, high grade tool steel, polished head,

ESD safe, resharpenable

Side cutter for universal use.

6,5 mm

115 mm 12 mm 10,5 mm ø1,6 mm

ask for

cutting

capability*

67 g Flush cut, high grade tool steel,

anti-glare finish, ESD safe

Side cutter with robust head.

6,5 mm

522E

599E

115 mm 10 mm 10,5 mm ø1,6 mm 67 g Semi flush cut, high grade tool steel,

burnished, ESD safe, resharpenable

Side cutter for universal use. Medium size.

511E 6,5 mm

115 mm 12 mm 10,5 mm ø1,6 mm 67 g Semi flush cut, high grade tool steel,

burnished, ESD safe, resharpenable

Side cutter for universal use. Medium size. For tough

cutting applications.

512E 6,5 mm

115 mm 12 mm 10,5 mm ø1,6 mm 67 g Semi flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter with strong head. For soft and small hard wires.

597E 6,5 mm

115 mm 11,5 mm 10,5 mm ask for

cutting

capability*

67 g Semi flush cut, Tungsten Carbide blades,

anti-glare finish, ESD safe

Side cutter with Tungsten Carbide blades for constant quality

cuts. Resistant to small stainless steel wires.

599T 6,5 mm

115 mm 11,5 mm 10,5 mm 67 g Flush cut, Tungsten Carbide blades,

anti-glare finish, ESD safe

Side cutter with Tungsten Carbide blades for constant quality

cuts. Resistant to small stainless steel wires.

6,5 mm

599TF

115 mm 10 mm 10,5 mm ø1,6 mm 67 g

6,5 mm

532N Super full flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter for universal use. Medium size.

Economical line. Perfect full flush cut. Soft wires only.

* Please provide wire sample.

115 mm 15 mm 10,5 mm 67 g Semi flush cut, Tungsten Carbide blades,

anti-glare finish, ESD safe

Side cutter with Tungsten Carbide blades. For cutting Vectran

braided wires, fibre optics, Kevlar and small stainless steel

braids. Ask for special application.

599TFO 6,5 mm ask for

cutting

capability*

115 mm 12 mm 10,5 mm 67 g Semi flush cut, Tungsten Carbide blades,

anti-glare finish, ESD safe

Side cutter with Tungsten Carbide blades for constant quality cuts.

Resistant to small stainless steel wires. Ask for special application.

595T 6,5 mm ask for

cutting

capability*

110 mm 9 mm 9 mm ø1,0 mm 48 g Flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Miniature side cutter. Small tapered head allows very

good access. Economical line.

622NA 6 mm

110 mm 9 mm 9 mm ø1,0 mm 48 g677E 6 mm Flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Miniature side cutter. Small tapered head allows very

good access.

120 mm 15 mm 13,5 mm ø1,8 mm 85 g Semi flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter for large wires. Economical line.

812N 7,5 mm

120 mm 15 mm 13,5 mm ø1,8 mm 85 g Semi flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter for hard leads, Kovar wires, connector pins, etc.

896E 7,5 mm

120 mm 15 mm 13,5 mm ø1,8 mm 85 g822N 7,5 mm Flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter for large wires. Economical line.

Oval Head

SIDE CUTTERS

Length 120 mm

Tapered Head

Length 110 mm

Tapered Head

Main application:

cutting applications where

easy access is required.

Length 115 mm

Model L A B C Max. Cu Weight Description

* Please provide wire sample.

115 mm 9 mm 10,5 mm ø1,2 mm 67 g Flush, high grade tool steel, anti-glare finish, ESD

safe, resharpenable

Side cutter for universal use. Medium size.

595E 6,5 mm

115 mm 9 mm 10,5 mm ø1,2 mm 67 g Flush, high grade tool steel, anti-glare finish,

ESD safe, resharpenable

Side cutter for universal use. Medium size.

577E 6,5 mm

110 mm 9 mm 9 mm ø0,8 mm 48 g662NB 6 mm Flush, high grade tool steel, anti-glare finish,

ESD safe, resharpenable

Miniature side cutter. Super fine relieved head allows

very good access. Economical line.

120 mm 15 mm 13,5 mm ø1,8 mm 83 g886E 7,5 mm Flush, high grade tool steel, anti-glare finish,

ESD safe, resharpenable

Side cutter for large wires.

Length 120 mm

Length 110 mm

Tapered Head

Relieved Head

SIDE CUTTERS

Length 115 mm

Relieved Head

Main application:

cutting applications

in confined areas.

Model L A B C Max. Cu Weight Description

595TF ask for

cutting

capability*

115 mm 12 mm 10,5 mm 67 g Flush cut, Tungsten Carbide blades, anti-glare finish,

ESD safe

Side cutter with Tungsten Carbide blades for constant quality

cuts. Resistant to small stainless steel wires.

6,5 mm

* Please provide wire sample.

120 mm 15 mm 13,5 mm ø1,8 mm 81 g884E 7,5 mm Flush cut, high grade tool steel, anti-glare finish,

ESD safe, resharpenable

Side cutter for large wires.

115 mm 12 mm 10,5 mm ø0,6 mm 67 g Flush cut, high grade tool steel, anti-glare finish,

ESD safe, resharpenable

Side cutter with relieved head. Medium size.

For Copper wires.

592E 6,5 mm

115 mm 13 mm 10,5 mm ø0,6 mm 67 g792E 6,5 mm

115 mm 9 mm 10,5 mm ø1,2 mm 67 g Flush cut, high grade tool steel, anti-glare finish,

ESD safe, resharpenable

Side cutter with fine relieved head. Medium size.

For fine wires.

576Z 6,5 mm

Super full flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Side cutter with relieved head. Medium size.

For fine soft wires.

Relieved Head

SIDE CUTTERS

Length 115 mm

Length 120 mm

Length 110 mm

110 mm 9 mm 9 mm ø1,0 mm 48 g Flush cut, high grade tool steel, anti-glare finish,

ESD safe, resharpenable

Miniature side cutter. Super fine relieved head allows very

good access.

676E 6 mm

115 mm 11 mm 10,5 mm 67 g Flush cut, Tungsten Carbide blades, anti-glare finish,

ESD safe

Miniature side cutter. Super fine relieved head allows very good

access. Tungsten Carbide blades for constant quality cuts. Resis-

tant to small stainless steel wires.

576TX 6,5 mm

110 mm 9 mm 9 mm ø1,0 mm 48 g Super full flush cut, high grade tool steel, anti-glare

finish, ESD safe, resharpenable

Miniature side cutter. Super fine relieved head allows very

good access. Soft wires only.

776E 6 mm

110 mm 9 mm 9 mm ask for

cutting

capability*

ask for

cutting

capability*

48 g632NCF 6 mm Super full flush cut, high grade tool steel, anti-glare

finish, ESD safe, soft materials only

Miniature side cutter. Special fine, high precision cut exclusive-

ly designed for soft materials like small Silicone tubing in

medical applications, precision connector sealing, miniature

rubber gaskets or cutting of molded soft synthetic parts. Super

fine relieved head allows very good access.

Model L A B C Max. Cu Weight Description

* Please provide wire sample.

140 mm 10 mm 10 mm ø1,25 mm 70 g Semi flush cut, high grade tool steel, anti-glare finish,

ESD safe, resharpenable, Ergonomic

Ergonomic side cutter for universal use.

2212E 5,8 mm

140 mm 10 mm 10 mm ø1,25 mm 70 g Flush cut, high grade tool steel, anti-glare finish,

ESD safe, resharpenable, Ergonomic

Ergonomic side cutter for universal use.

2222E 5,8 mm

140 mm 10 mm 10 mm ø1,25 mm 70 g2232E 5,8 mm Super full flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable, Ergonomic

Ergonomic side cutter for fine and soft wires.

115 mm max.D 0,8 mm max.B 2,0 mm 79 g884EPCM

120 mm 12 mm 10,5 mm ø2,0 mm

100 g Semi flush cut, high grade tool steel, anti-glare finish,

ESD safe, compound action

Compound action side cutter. Easy cutting for hard wires. 3,5

times less force needed than with conventional cutters. High cut-

ting capacity: hard wires up to 0,5 mm, soft wires up to 2,0 mm.

Flush cut on request.

147A 7,5 mm

Flush cut, high grade tool steel, anti-glare finish,

ESD safe, PCB separation

Side cutter for PCB separation only. New improved design for

higher blade resistance. No breakage guarantee.

Specials

SIDE CUTTERS

Side Cutters with Ergonomic Handles*

*Ergonomic features see page 18

Oval Head

Main applications:

Constant production cutting

applications.

Model L A B C Max. Cu Weight Description

Specials

140 mm 10 mm 10 mm ø0,8 mm 70 g2222EB 5,8 mm Flush, high grade tool steel, anti-glare finish,

ESD safe, resharpenable, Ergonomic

Ergonomic side cutter for universal use. Relieved

head for working in confined areas.

140 mm 10 mm 10 mm ø1,0 mm 70 g

2222EA 5,8 mm Flush, high grade tool steel, anti-glare finish,

ESD safe, resharpenable, Ergonomic

Ergonomic side cutter for universal use. Tapered head for

easier access.

Tapered Head

Relieved Head

SIDE CUTTERS WITH ERGONOMIC HANDLES

Tapered Head

Relieved Head

Model L A B C Max. Cu Weight Description

Semi Flush

These blades allow a very high resistance. Will cut

malleable wires like Copper as well as hard wires.

Leaves a pinch at the end of the wire.

Flush

Allow a flat cut with high cutting capacities. The edge of

the wire is cut off almost squarely. Guaranteed precision

even after constant usage. Thanks to faster penetration

into the component the operator’s effort is substantially

reduced.

Tip Cutters

TIP CUTTERS

Tip Cutters

Erem offers the largest variety of high precision tip cut-

ters.

All edges are finely radiused to avoid board damaging.

To find the cutter for your demand just follow the steps

Angled

For standard tip cutting applications.

110 mm Small short head, for increased cutting resistance.

For almost all cutting applications.

115 mm Longer and finer head.

For cutting applications where easy access is more impor-

tant than a high cutting capacity.

120 mm Strong version.

For all cutting applications where high cutting capacity

is required.

Angled Narrow

For applications in confined areas. Longer but narrow head for

better reach between parts and into areas with limited access.

Straight

For vertical or horizontal tip cutting applications.

Head Form

Cut

Size

Safety Lead Device

1 2

1. Erem Cut 2. Others

Cutting safety device, holds wire scraps.

Can be adapted on 582E only.

Add “W” when ordering, e.g. 582EW.

Erem Blade Protection

All tip cutters have an “anti-overbite”

system which prevents blades from

overlapping.

110 mm 15 mm 10,5 mm ø0,6 mm 67 g

575E 6,5 mm 10 mm <)45°, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter. Small size. For delicate work on hybrid circuits or

micro modules.

110 mm 12 mm 10,5 mm ask for

cutting

capability*

67 g <)30°, semi flush cut, Tungsten Carbide,

anti-glare finish, ESD safe

Tip cutter. Standard size. Tungsten Carbide blades for con-

stant quality cuts even on hard wires.

503ET 6,5 mm 10 mm

110 mm 12 mm 10,5 mm ø1,2 mm 67 g <)30°, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter. Standard size. For universal use.

503E 6,5 mm 10 mm

110 mm 13 mm 10,5 mm ø1,2 mm 67 g <)30°, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter. Standard size. Rounded head. For universal use.

504AE 6,5 mm 10 mm

110 mm 12 mm 10,5 mm ask for

cutting

capability*

67 g503ETF 6,5 mm 10 mm <)30°, flush cut, Tungsten Carbide blades,

anti-glare finish, ESD safe

Tip cutter. Standard size. Tungsten Carbide blades for con-

stant quality cuts even on hard wires.

Angled Head

TIP CUTTERS

Length 110 mm

Angled Head Small

Length 110 mm

Angled Head Small

Main applications:

for applications in confined areas.

Angled Head

Main application:

for standard tip cutting applications.

Model L A B C DMax. Cu Weight Description

* Please provide wire sample.

120 mm 21 mm 10,5 mm ø1,2 mm 68 g <)40°, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter. Strong version.

555E 6 mm 6,5 mm

115 mm 18 mm 10,5 mm ø0,6 mm 68 g <)40°, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter. Medium size. Relieved jaws for easier access.

572E 6,5 mm 6,5 mm

115 mm 20 mm 10,5 mm ø1,0 mm 68 g <)50°, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter. Cuts easily DIL leads from the rear. Cuts pins on

dense PCB. Ideal maintenance tool.

593AE 6,5 mm 4 mm

115 mm 19 mm 10,5 mm ø1,0 mm 68 g <)45°, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter medium size. A must when working on PCB’s,

cutting component leads. Also ideal for rework.

582E 6,5 mm 7 mm

115 mm 19 mm 10,5 mm ø1,0 mm 70 g582EW 6,5 mm 7 mm <)45°, flush cut, high grade tool steel, anti-glare

finish, ESD safe, resharpenable, retention clip

Same as 582E but with retention clip, holds wire scraps

after cutting.

Angled Head Small

TIP CUTTERS

Length 115 mm

Length 120 mm

Model L A B C DMax. Cu Weight Description

120 mm 22 mm 9 mm ø0,6 mm 67 g570E 6,5 mm 4 mm Flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter for horizontal or vertical tip cutting.

For cutting at extreme tips.

110 mm 10,5mm 9 mm ø0,6 mm

ø0,25 mm

48 g Horizontal, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Miniature tip cutter. For cutting small wires in dense

working areas. Vertical SMD cutter.

670E 6 mm 3 mm

110 mm 10 mm 9 mm 48 g670EP 6 mm 2 mm Vertical tip cutter, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Miniature tip cutter. High precision SMD lead cutting.

Micro-packages up to 0,25 fine pitches before desoldering.

No breakage guarantee.

For µ-pitches under 0,5 mm use 670 EPF

Straight Tapered Head

TIP CUTTERS

Length 110 mm

Length 120 mm

Straight Tapered Head

Main applications:

for horizontal use and easier access.

Model L A B C DMax. Cu Weight Description

140 mm 20 mm 10 mm ø1,0 mm 70 g2282E 5,8 mm 7 mm <)45°, flush cut, high grade tool steel, anti-glare

finish, ESD safe, resharpenable, ergonomic

Ergonomic tip cutter. Medium size. Ideal for working on

PCB’s or cutting component leads.

120 mm 23 mm 9 mm ø0,8 mm 67 g573E 6,5 mm 3,5 mm Vertical, flush cut, high grade tool steel,

anti-glare finish, ESD safe, resharpenable

Tip cutter for vertical tip cutting. For fine wires.

TIP CUTTERS

Straight Head

Tip Cutters with Ergonomic Handles*

Angled Head Small

Straight Head

Main applications:

for vertical use

*Ergonomic features see page 18

Model L A B C DMax. Cu Weight Description

28 mm 130 mm

(w.o. head)

130 g1500BSF Manual air tool

Small precise pneumatic cutter housing. Improved lifetime and reliability.

Easy interchangeable cutting heads. Requires 4- 6 bar oil-free, clean

compressed air. New economical version.

Pneumatic Side Cutters and Tip Cutters

PNEUMATIC CUTTERS

Housing

Cutting Heads for 1500BSF

Side Cutters

Oval Head

Model LDWeight Description

Pneumatic Side Cutters and Tip Cutters

The Erem 1500BSF is a small lightweight air tool that can

be fitted with a range of cutter heads making this tool

extremely versatile. It is suitable for the cropping of

conventional components, as well as small ductile or

plastic parts.

10 mm 10,5 mm ø1,6 mm Semi flush cut, high grade tool steel, anti-glare finish,

resharpenable

Side cutter for universal use. Medium size. Economical line.

Improved lifetime.

1512N 6,5 mm 35 g

10 mm 10,5 mm ø1,6 mm 35 g

1522N 6,5 mm Flush cut, high grade tool steel, anti-glare finish,

resharpenable

Side cutter for universal use. Medium size. Economical line.

Improved lifetime.

Model A B CMax. Cu Weight Description

9 mm 10,5 mm ø1,4 mm 35 g1522NA 6,5 mm Flush cut, high grade tool steel, anti-glare finish,

resharpenable

Side cutter for easier access. Medium size. Economical line.

Improved lifetime.

9 mm 10,5 mm ø1,2 mm 32 g1522NB 6,5 mm Flush cut, high grade tool steel, anti-glare finish,

resharpenable

Side cutter for confined areas. Medium size. Economical line.

Improved lifetime.

12 mm 10,5 mm ø1,2 mm 38 g1503E 6,5 mm 9 mm <)30°, flush cut, high grade tool steel, anti-glare finish,

resharpenable

Tip cutter. Small size. For universal use.

Tapered Head

PNEUMATIC SIDE CUTTERS AND TIP CUTTERS

Tapered Head

Model A B C Max. Cu Weight Description

Model A B C D Max. Cu Weight Description

Relieved Head

Tip Cutters

Angled Head

Note: further head shapes available on request.

The Erem protective stop

screw increases the performance of the tip cutters:

Clearance B larger than the diameter = cut wire is ejected

Clearance B smaller than the wire diameter = cut wire is held

Adjust the protective stop screw D to set blade C does not hit the opposite side.

This improves the Lifetime of the blade.

120 mm 20 mm ø1,2 mm 70 g Flush cut, high grade tool steel, polished tips, ESD safe

Distance cutter with adjustable cutting length from 1,2 mm to 6 mm

with setting screw.

530E15A 4,5 mm

115 mm 23 mm ø0,8 mm 70 g573EB 0-5 mm

3,5 mm Flush cut, Plastic anvil. High grade tool steel, polished tips,

ESD safe

Distance cutter with adjustable cutting length from 0 mm to 5 mm

with setting screw. Replaceable synthetic stop, no risk of board

damage.

1,2 - 6

Flush cut, high grade tool steel, polished tips, ESD safe

Distance cutter. Cuts the lead to a predetermined length of 1,5 mm.

Length from 0,5 mm to 2,5 mm on request, see price list. Reduces

mechanical shock on components. With adjustable screw for possi-

ble wire holding.

530E

115 mm 20 mm ø1,0 mm 67 g 45°, flush cut, high grade tool steel, polished tips, ESD safe

Distance cutter. Cuts the lead to a predetermined length of 1,5 mm.

Lenght from 0,5 mm to 2,5 mm on request, see price list. Reduces

mechanical shock on components.

549E 3 mm

blade

4,5 mm

120 mm 20 mm ø0,8 mm 67 g Flush cut, high grade tool steel, polished tips, ESD safe

Distance cutter. Cuts the lead to a predetermined length of 1,5 mm.

Reduces mechanical shock on components.

500-108 3 mm

110 mm 10 mm ø1,0 mm 65 g530S 4 mm

20 mm

30°, flush cut, high grade tool steel, polished tips,

ESD safe

Distance cutter. Cuts and flattens leads to prevent component from

fallen off the circuit board. Predetermined length of 1,5 mm.

Length from 0,5 mm to 2,5 mm on request.

120 mm ø1,0 mm 67 g

3 mm

Distance Cutters

DISTANCE CUTTERS

Model L A E Max. Cu Weight Description

Model L A FE Max. Cu Weight Description

Fixed Cutting Height

Adjustable Cutting Height

Distance Cutters

Erem distance cutters are available with fixed or adjustable

cutting distance. The tips are brightly polished to avoid

board damage

1,5 mm

(Standard)

1,5 mm

(Standard)

1,5 mm

(Standard)

120 mm 23 mm 9 mm 1,4 mm 67 g High grade tool steel, anti-glare finish, ESD safe

Flat nose pliers with smooth jaws.

542E 6,5 mm 2,4 mm

125 mm 23 mm 9 mm 3 mm 67 g High grade tool steel/Nylon, anti-glare finish,

ESD safe

Flat nose pliers with replaceable Nylon inserts to prevent

nicking e.g. for straightening precious metal, leads, etc.

531E 6,5 mm 5 mm

120 mm 23 mm 9 mm 1,2 mm 67 g547 6,5 mm 0,9 mm High grade tool steel, anti-glare finish, ESD safe

Needle nose pliers with smooth jaws, very precise.

120 mm 23 mm 9 mm 1,6 mm 67 g543E 6,5 mm 0,8 mm High grade tool steel, anti-glare finish, ESD safe

Round nose pliers with smooth jaws, very precise.

PLIERS

Pliers

Round Nose

Needle Nose

Flat Nose

Model L A B C E øG Weight Description

Pliers

Erem offer a range of pliers with

standard and ergonomic handles.

Model L A B C E G Weight Description

Model L A B C EG Weight Description

120 mm 23 mm 9 mm 1,4 mm 67 g High grade tool steel, anti-glare finish, ESD safe

Chain nose pliers with smooth jaws.

544E 6,5 mm 1 mm

125 mm 23 mm 9 mm 1,4 mm 67 g High grade tool steel, anti-glare finish, ESD safe

Chain nose pliers with smooth jaws, inside serrated.

544D 6,5 mm 1 mm

125 mm 24 mm 9 mm 0,8 mm 67 g546E 6,5 mm 0,8 mm <)60°, high grade tool steel, anti-glare finish,

ESD safe

Chain nose pliers bent with smooth jaws.

D = 6,0 mm

Pliers

PLIERS

Model L A B C E G Weight Description

Chain Nose

160 mm 33 mm 10 mm 1,5 mm 80 g2242E 5,8 mm 3,5 mm High grade tool steel, anti-glare finish, ESD safe,

Ergonomic

Ergonomic flat nose pliers with long smooth jaws.

Precise radiused edges.

165 mm 35 mm 10 mm 1,2 mm 80 g2211P 5,8 mm 1 mm High grade tool steel, anti-glare finish, ESD safe,

Ergonomic

Ergonomic needle nose pliers with smooth jaws.

Pliers with Ergonomic Handles*

PLIERS

Needle Nose

Model L A B C E G Weight Description

Flat Nose

Model L A B C E G Weight Description

*Ergonomic features see page 18

120 mm 12 mm 12 mm ø 1,5 mm 81 gEROP331 7,5 mm <)40°, flush cut, high quality tool steel, burnished,

ESD safe

Tip cutter bent, slim. Ideal for fine works. Exact guidance of

cutting edges.

110 mm 13,5 mm 11 mm ø1,0 mm 72 gEROP155 7,5 mm

110 mm 11 mm 9,5 mm

-ø0,6 mm 61 g Semi flush cut, high quality tool steel, burnished,

ESD safe

Side cutter, tapered head, slim-line. Fine cutting edges for

cutting thin wires and cutting tiny components.

EROP357 7,5 mm

130 mm 18 mm 11 mm ø2,0 mm 110 gEROP419 8 mm

EROP CUTTERS AND PLIERS

Model L A B C Max. Cu Weight Description

EROP Cutters and Pliers

Side Cutters

EROP Cutters and Pliers

The newly introduced EROP range from Erem offers a

variety of side cutters and pliers at a budget price. The

tools are manufactured from high quality tool steel have

a box joint construction, burnished heads, robust opening

leaf springs and replaceable soft ESD safe grips.

Tip Cutters

Model L A B D Max. Cu Weight Description

110 mm 11 mm 9,5 mm ø1,0 mm 61 g Semi flush cut, high quality tool steel, burnished,

ESD safe

Side cutter, tapered head, slim-line. Fine cutting edges for

fine work.

EROP355 7,5 mm

Semi flush cut, high quality tool steel, burnished,

ESD safe

Side cutter, round head. For assembly work on circuit boards,

telephone and radio work.

Semi flush cut, high quality tool steel, burnished,

ESD safe

Side cutter robust. Round head. For general use.

120 mm 22,5 mm 9,5 mm 2 mm 66 g High quality tool steel, burnished, ESD safe

Needle nose pliers. Smooth polished inside jaws for

gripping fine parts and forming wire.

EROP174 6,5 mm 1,5 mm

140 mm 39 mm 12 mm 1,8 mm 90 g High quality tool steel, burnished, ESD safe

Needle nose pliers. Serrated, for gripping, holding and

forming wires and parts.

EROP277 7,5 mm 1,2 mm

170 mm 64 mm 13,5 mm 2 mm 113 gEROP280 8 mm 1,8 mm High quality tool steel, burnished, ESD safe

Needle nose pliers long. Oval pointed. Serrated.

Robust but fine tips for work in confined areas.

125 mm 22,5 mm 9,5 mm 1,6 mm 63 g

EROP172 6 mm 0,8 mm High quality tool steel, burnished, ESD safe

Round nose pliers. Smooth polished inside jaws for bend-

ing fine loops.

130 mm 7,5 mm ø1,0 mm 84 g

EROP330 7,5 mm 5,0 mm <)40°, flush cut, high quality tool steel, burnished,

ESD safe

Tip cutter bent. For PCB applications.

EROP CUTTERS AND PLIERS

Model L A B D Max. Cu Weight Description

Model L A B C E øG Weight Description

EROP Cutters

EROP Pliers

Round Nose

Model L A B C E G Weight Description

Needle Nose

120 mm 21 mm 5 mm 75 g510AE 4 mm 0,25 -

1,02 mm

(AWG

30 - 18)

High grade tool steel, anti-glare finish, ESD safe

Front stripping tool. Adjustable for different diameters.

Diameter adjustable with screw. With interchangeable side

cutting blade. For all kind of insulation and fibre optic outer

jackets.

120 mm 22,5 mm 9,5 mm 1,2 mm 63 g High quality tool steel, burnished, ESD safe

Flat nose pliers. Slim smooth jaws for delicate work.

EROP170 6 mm 3 mm

120 mm 22,5 mm 9,5 mm 1,2 mm 67 gEROP171 6 mm 4 mm High quality tool steel, burnished, ESD safe

Flat nose pliers. Slim smooth jaws for delicate work.

With larger gripping area.

STRIPPING TOOLS

Model L A B C E G Weight Description

High Precision Stripping Tools

Erem stripping tools are the most precise tools used in the

electronic or aviation field. They are manufactured from

high grade tool steel to ensure durability. To ensure that

you have the correct tool for your application, send us

samples of your wire and we will make recommendations.

EROP Pliers

Flat Nose

Stripping Tools

Front Stripping

Model L A E G

7 mm

H WeightWire øDescription

120

6,5

80 g552E 1

0,06 -

0,25

(AWG

42-30)

High grade tool steel, anti-glare finish, ESD safe,

high precision

Front stripping tool. Unique high precision tool. Strips one

size at a time without scratching the cores. For all kind of

insulation,PTFE,, Tefzel, fibre optics or stranded wires.

Diameter adjustable with screw plus stop screw.

Replaceable cutting blades. Supplied with screwdriver

and hex key.

120

6,5

80 g552S 6,7

0,06 -

0,25

(AWG

42-30)

120

67 g

502E30 6,3

2,4

0,25

(AWG

30)

High grade tool steel, anti-glare finish, ESD safe,

high precision

Side stripping tool. Unique high precision tool. Strips one

size at a time without scratching the cores. For all kind of

insulation,PTFE,, Tefzel, fibre optics or stranded wires.

Diameter adjustable with screw plus screw stop.

Replaceable cutting blades. Supplied with screwdriver

and hex key.

High grade tool steel, anti-glare finish, ESD safe

Combination side stripping tool. Fine replaceable cutting

blades. Strips resistant insulations such as PTFE,, Tefzel,

glass reinforced Fluoropolymere. This tool combines strip-

ping, cutting and bending/gripping. For one specific wire

diameter, AWG 30 (0,25 mm). Other diameters on request.

120

0,25 - 1,3 mm

(AWG 30-16)

75 g

520E 11

High grade tool steel, anti-glare finish, ESD safe,

high precision

Strips one or several wires simultaneously.

Particularly designed for mini or standard wire-wrapping

work. Diameter adjustable with screw plus blocking nut.

Stripping Tools

STRIPPING TOOLS

Model L A E F G H WeightWire øDescription

Side Stripping

Special Stripping

Model L A D Wire øWeight Description

120 mm 13 mm 10 mm 10 mm 70 g554E 10 mm

120 mm 23 mm 5,6 mm 4,5 mm 70 g554A 4 mm

High grade tool steel, anti-glare finish, ESD safe

Bending pliers for component leads, etc. U-shape.

Max. lead ø:

Diodes: 0,65 mm

Capacitors: 0,7 mm

Resistors: 1/2 W

High grade tool steel, anti-glare finish, ESD safe

Bending pliers for component leads, etc. U-shape.

Axial forming action.

Max. lead ø:

Diodes: 0,65 mm

Capacitors: 0,7 mm

Resistors: 1/2 W

120 mm 23 mm 5,6 mm 4,5 mm 70 g High grade tool steel, anti-glare finish, ESD safe

Bending pliers with tapered nose. For component leads, etc.

U-shape. Axial forming action.

Max. lead ø:

Diodes: 0,65 mm

Capacitors: 0,7 mm

Resistors: 1/2 W

554B 2,5 mm

PRE-FORMING TOOLS

Pre-Forming Tools

For Passive Components

Model L A D E F Weight Description

Pre-Forming Tools

Erem offers preforming tools for active and

passive components.

120 mm 20 mm 6,5 mm 4 mm 70 g554TX 6,5 mm

50788

50789Z

High grade tool steel, anti-glare finish, ESD safe

Bending pliers for forming stress reliefs. One lead left,

one lead right in one single operation. For stable insertion.

Max. lead ø:

Diodes: 0,65 mm

Capacitors: 0,7 mm

Resistors: 1/2 W

120 mm 23 mm - 3 mm 67 g High grade tool steel, anti-glare finish, ESD safe,

cut + bend

Bending pliers. Cuts and bends leads of popular radial

components to a specific length.

Max. lead ø:

Diodes: 0,65 mm

Capacitors: 0,7 mm

Resistors: 1/2 W

4 mm

120 mm 23 mm 3,3 mm - 67 g High grade tool steel, anti-glare finish, ESD safe,

cut + bend

Bending pliers. Cuts and bends leads of various types of

components.

Max. lead ø:

Diodes: 0,65 mm

Capacitors: 0,7 mm

Resistors: 1/2 W

3,5 mm

PRE-FORMING TOOLS

Pre-Forming Tools

Model L A D E F Weight Description

120 mm max.

15 mm

3-12 mm 85 g500103A -

500210E

500104A

High grade tool steel, anti-glare finish, ESD safe

High precision preforming tool. Bends flat parts, contacts, power

transistors, triac leads, etc. to a right angle. Adjustable with screw.

120 mm max.

11 mm

3,8-15 mm 85 g High grade tool steel, anti-glare finish, ESD safe, cut + bend

High precision preforming tool. Improved version of 500103A. Cuts and

bends TO series, power transistor, LEDs, etc. simultaneously at 90°

without stressing the component. Simple adjustment (M) and replace-

able cutting blade.

120 mm max.

13 mm

3,5-15 mm 85 g 3 leads, high grade tool steel, anti-glare finish, ESD safe

High precision preforming tool for 3 leads. Bends TO 126, 218, 220,

power transistor leads, etc. at 90° in two rows. Adjustable (M) with

screw.

2,54 mm

Pre-Forming Tools

PRE-FORMING TOOLS

Pre-Forming Tools for Active Components

Model L K MIWeight Description

For Active Components

120 mm max.

13 mm

3,5-15 mm 85 g500104AI 2,54 mm 3 leads, high grade tool steel, anti-glare finish, ESD safe,

central lead backwards

High precision preforming tool for 3 leads. Bends TO 126, 218,

220, power transistor leads, etc. at 90° in two rows. Adjustable

(M) with screw. Central lead backwards.

Pre-Forming Tools

PRE-FORMING TOOLS

For Active Components

500154A

500154AI

120 mm max.

13 mm

4,5-9,5 mm 90 g 5 leads, high grade tool steel, anti-glare finish, ESD safe

High precision preforming tool for 5 leads.. Bends TO 126, 218, 220,

power transistor leads, etc. at 90° in two rows. Adjustable (M) with

screw.

2,54 mm

120 mm max.

13 mm

4,5-9,5 mm 90 g 5 leads, high grade tool steel, anti-glare finish, ESD safe,

opposite leads backwards

High precision preforming tool for 5 leads.. Bends TO 126, 218, 220,

power transistor leads, etc. at 90° in two rows. Adjustable (M) with

screw. Opposite leads backwards.

2,54 mm

120 mm max.

13 mm

17 mm 2,8 mm 100 g High grade tool steel, anti-glare finish, ESD safe

High precision preforming tool. For flat packs, quads, etc.

No friction effect. Designed after MIL specs. Cuts + bends.

80013C

Model L K M I Weight Description

For Flat Packs, Quads

Model L A K MWeight Description

120 mm 25 mm 0,9 mm 98 g809IC High grade tool steel, anti-glare finish, ESD safe

High precision preforming tool. Cuts and bends DIL pins to a 90° angle

in one operation. For up to 20 pin IC. Allows DIL-ICs to go SMT.

Model L E FWeight Description

For DIL / IC

120 mm 20 mm

27 mm

32 mm

36 mm

505C

505E

505A

505BGC

505BG

-505 High grade tool steel, anti-glare finish, ESD safe

Inserting and extracting pliers. Available sizes see chart.

Adjustable with screw.

Insertion: squeeze IC pins.

Extraction: adjust jaws width so that pins stay in the middle of holes.

IC and SMD Tools

IC AND SMD TOOLS

Model L E WeightModel Description

Inserting and Extracting

IC and SMD Tools

Erem IC and SMD tools for inserting, extracting,

straightening and cutting of ICs and SMDs

130 mm 23 mm 42 mm 120 g808G 1 mm 16 pins, high grade tool steel, anti-glare finish, ESD safe

Straightening pliers. For multiple DIL / IC leads. Before insertion or after

soldering. Laterally (a) or parallel (b). For up to 16 pins.

Ideal maintenance tool.

125 mm 23 mm 20 mm 85 g508Z 1 mm 8 pins, high grade tool steel, anti-glare finish, ESD safe

Straightening pliers. For multiple DIL / IC leads. Before insertion or after

soldering. Laterally (a) or parallel (b). For up to 8 pins. Ideal mainte-

nance tool.

Straightening

Model L A GE Weight Description

(a) (b)

Pins:

Width:

IC AND SMD TOOLS

IC and SMD Tools

110 mm 10 mm 3 mm 48 g Flush, high grade tool steel, anti-glare finish, ESD safe,

resharpenable

High precision tip cutter. For cutting leads of SMD micro packages up to

0,25 mm or fine pitch components less than 1/20”. Cuts pins before heat

desoldering. Essential SMD tool. No breakage guarantee.

For µ-pitches below 0,5 mm model 670EPF is necessary. Please supply IC

together with order.

670EP 2 mm

115 mm 20 mm 4 mm - 67 g

593AE Flush, high grade tool steel, anti-glare finish, ESD safe,

resharpenable

High precision tip cutter bent. For cutting DIL leads from the rear.

Ideal maintenance tool. Cuts pins before heat desoldering.

Model L A D E Weight Description

Cutting

Trimming

120 mm 21 mm 3,5 mm 1,5 mm 74 g 8 pins, high grade tool steel, anti-glare finish,

ESD safe, trim

Trimming pliers. Trims an entire row of 8 pins to the same

length. The lead tips are cut flat. For multiple DIL / IC leads.

Before insertion or after soldering.

509E 21,5 mm

Model L A D E F Weight Description

FIBRE OPTIC TOOLS

120

6,5

80 g552S 6,7

0,06 -

0,25

AWG

42 - 30

High grade tool steel, anti-glare finish, ESD safe,

high precision

Side stripping tool. Unique high precision tool. Strips one

size at a time without scratching the cores. For all kind of

insulation,PTFE,, Tefzel, fibre optics or stranded wires.

Diameter adjustable with screw plus screw stop.

With replaceable cutting blade.

Supplied with screwdriver and hex key.

Fixed standard ølike 125 µ on request.

Fibre Optic Tools

130 mm 20 g

249SA Special stainless steel / PPS, anti-glare finish,

non-magnetic, ESD safe, suitable for fibre optics

Precision tweezers with serrated grips and synthetic tips

(PPS). Heat resistant up to 250°C (480°F). Resistant to acids

and solder. Waterproof, ESD safe. Does not damage fibre

optic cores.

Model

115 mm 15 mm 10,5 mm 67 g Semi flush cut, Tungsten Carbide blades,

anti-glare finish, ESD safe

Side cutter with Tungsten Carbide blades. For cutting Vectran

braided wires, fibre optics, Kevlar and small stainless steel

braids. Ask for special application.

599TFO 6,5 mm

11,5 mm 10,5 mm 6,5 mm

LWeight Description

115 mm 67 g

599FO A unique high precision cutter for Kevlar®silks

Cuts all silks even very close to fibre core.

Avoid any other application.

Model LA B C

Weight Description

Model L A E F G H WeightWire øDescription

Side Stripping

Cutting

Holding / Gripping

Fibre Optic Tools

High precision tools for working on fibre optics.

KITS

Kits

Erem kits offer a range of popular tweezers, cutters

and pliers in different combinations.

230 mm 30 mm 350 g

130 mm

3900KC Black plastic case, cushioned, ESD safe, consists of:

Tweezers

51SA Precision tweezers 115 mm, bent 30° , relieved. Very fine tips.

Stainless steel, anti-glare finish, non-magnetic.

102ACA SMD tweezers 115 mm, with angled head and blunted edges to

avoid board damaging. For handling of small components. Special stainless

steel, anti-glare finish, non-magnetic.

103ACA SMD tweezers 115 mm, with angled head 45° and blunted edges

to avoid board damaging. For horizontal handling of small components.

Special stainless steel, anti-glare finish, non-magnetic.

150SAMB SMD tweezers 120 mm, bent 40°, serrated handles. For gripping

small cylindrical parts ø1,2 - 2,5 mm, special stainless steel, anti-glare

finish, non-magnetic.

150SAMF SMD tweezers 120 mm, straight, serrated handles. For gripping

small cylindrical parts ø1,2 – 2,5 mm, special stainless steel, anti-glare

finish, non-magnetic.

Cutters

670EP High precision tip cutter 110 mm. For cutting leads of SMD micro

packages up to 0,25 mm or fine pitch components less than 1/20”.

Flush cut, high grade tool steel, anti-glare finish, ESD safe.

Width Thickness Weight Description

Model

Kit for SMD Handling

25 mm 15 g Adapter

360° rotating head for housing 3000ESD. With straight nozzle, stainless steel

for direct pick-up or as adapter for suction tips or suction cups.

3200

5 mm 5 g3231 Adapter

Adapter fix. For use with suction tips series 3300.

15 mm

total

3 g3231 Adapter

Can be used with or without tips, fix.

Holds either suction cup 2052E or tips 2040Z, 2041Z, 2044Z.

140 mm 10 mm 35 g

3000ESD Housing

Housing with axial air switch, ergonomic shape, serrated grip area, ESD safe.

Professional device.

3000 ESD

3740

(optional)

3200 2040Z / 2044Z / 2041Z

2052E

3303 / 3305Z /

3310Z / 3315 /

3330

3231

3232 2040Z / 2044Z / 2041Z

2052E

Vacuum Manipulator

The Erem 3000 series offers a vacuum micro manipulation

system for precise handling of tiny components as well as

flat parts. For use in mechanical assembly, laboratories,

etc. The advantages are:

• easy pick up of components or silicon wafers

• immediate pick up and release of the parts

• full 360° rotating system

• direct axial air switch

• ergonomic shape reduces hand and wrist fatigue

• ESD safe

Vacuum Manipulator

VACUUM MANIPULATOR

Housing

Inserts for Housing 3000ESD

Adapter

Model L Diameter Weight Description

Model L Weight Description

3231

3232

Model

0,15 mm Suction tip straight,PTFE, tip

For use with rotating head 3200 or fix adapter 3232.

0,70 mm

2040Z

0,90 mm Suction tip straight, Polyethylene tip

For use with rotating head 3200 or fix adapter 3232.

1,30 mm

2044Z

1,40 mm

2,0 mm

2041Z Suction tip straight, Polyethylene tip

For use with rotating head 3200 or fix adapter 3232.

0,16 mm

0,30 mm

3303

3305Z

3310Z

3315

3330

0,25 mm

0,50 mm

0,65 mm

1,0 mm

1,5 mm

2,5 mm Suction needle bent 45°, stainless steel

For use with fix adapter 3231.

3,0 mm

Suction needle bent 45°, stainless steel

For use with fix adapter 3231.

Suction needle bent 45°, stainless steel

For use with fix adapter 3231.

Suction needle bent 45°, stainless steel

For use with fix adapter 3231.

Suction needle bent 45°, stainless steel

For use with fix adapter 3231.

Vacuum Manipulator

VACUUM MANIPULATOR

Suction Tips Straight

Inside øDescription

Model Outside ø

Inside øDescription

Model Outside ø

Suction Needles

Suction Cups

4,5 mm Suction cup, Silicone rubber

For use with rotating head 3200 or fix adapter 3232.

2052E

Model Diameter øDescription

2044Z

140 mm (length) Pick-up device

Pick-up device for silicon wafers up to 8". ESD-safe.

Needs min. -600 mBar vacuum. For use with suction

plates 3503A or 3503B.

3000WESD

Insert for vertical pick-up for silicon

wafers up to 8"

For vertical pick up. Armite suction plate with

stainless steel tube, ESD safe.

3503A

Insert for horizontal pick-up for silicon

wafers up to 8"

Stainless steel tubing bent for horizontal pick up.

Angles can be determined by customer, no price

surcharge. Armite suction plate with stainless steel

tube, ESD safe.

3503B

Wafer Handling

VACUUM MANIPULATOR

Wafer Handling

3000 WESD

3503A

3503B

30 mm

80 mm 20 mm

Ø 2,5 mm

20 mm

Ø 2,5 mm

30 mm 73 mm 20 mm

Model Size Description

3000KCESD

Accessories

Vacuum Kit

VACUUM MANIPULATOR

Weight Description

Model Size

Pump

Membrane pump 230V, silent running, air volume 5 l/min, max. vacuum -250 mbar.

(not suitable for wafer pick up)

3714Z

Tubing System

Tubing system flexible, 1,8 m, ESD safe.

3008ESD

Filter

Filter for tubing system 3008ESD.

3717

Table Holder

Table holder for 3000ESD and 3000WESD housing (without accessory).

3740

Model Description

400 x 320 x 105 mm 2,2 kg Black plastic case, cushioned, consists of:

3000ESD Housing

3200 Head / adapter rotating

3231 Adapter fixed

3305Z, 3310Z, 3315 Suction needles bent

2052E suction cup ø4,5 mm

KDS 260L suction cup ø9,5 mm

3740 Table holder for 3000ESD

3714Z Membran pump 230 V

3008ESD Tubing system 1,8 m

3717 Air filter

102ACA SMD tweezers 115 mm

Size Weight DescriptionModel

Content subject to change without prior notice.

NOTES

INDEX

Model Page Model Page Model Page

024C . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

1SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

1SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2ASARU . . . . . . . . . . . . . . . . . . . . . . . . .11

2ASASL . . . . . . . . . . . . . . . . . . . . . . . . . .11

2ASASLT . . . . . . . . . . . . . . . . . . . . . . . . .11

2SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3CBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

3CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3CSASL . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3CTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

3SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

4SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

4SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

5ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

5ASASL . . . . . . . . . . . . . . . . . . . . . . . . . . .9

5BSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

5CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

5FSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

5MBS . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

5SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

5SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

7SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

7SASL . . . . . . . . . . . . . . . . . . . . . . . . . . .10

11N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

15AGS . . . . . . . . . . . . . . . . . . . . . . . . . . .15

15AGW . . . . . . . . . . . . . . . . . . . . . . . . . .15

20AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

21SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

24SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

25SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

29SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

29W30 . . . . . . . . . . . . . . . . . . . . . . . . . .15

29Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

30SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

32BSA . . . . . . . . . . . . . . . . . . . . . . . . . . .13

32BSA20 . . . . . . . . . . . . . . . . . . . . . . . . .13

32BSA25 . . . . . . . . . . . . . . . . . . . . . . . . .12

39SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

40SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

51SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

51SASL . . . . . . . . . . . . . . . . . . . . . . . . . . .9

52ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11

53CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

64SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

65ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .10

91SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

102ACA . . . . . . . . . . . . . . . . . . . . . . . . .12

102ACAX . . . . . . . . . . . . . . . . . . . . . . . .12

103ACA . . . . . . . . . . . . . . . . . . . . . . . . .12

140SA . . . . . . . . . . . . . . . . . . . . . . . . . . .14

141SAP . . . . . . . . . . . . . . . . . . . . . . . . . .14

141SAPH . . . . . . . . . . . . . . . . . . . . . . . . .14

150SA . . . . . . . . . . . . . . . . . . . . . . . . . . .13

150SAD . . . . . . . . . . . . . . . . . . . . . . . . . .12

150SAMB . . . . . . . . . . . . . . . . . . . . . . . .13

150SAMF . . . . . . . . . . . . . . . . . . . . . . . .12

151SA . . . . . . . . . . . . . . . . . . . . . . . . . . .13

249SA . . . . . . . . . . . . . . . . . . . . . . . . .7, 50

249CER . . . . . . . . . . . . . . . . . . . . . . . . . . .7

258SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

500ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14

600ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14

600JSA . . . . . . . . . . . . . . . . . . . . . . . . . .14

608ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14

940AS . . . . . . . . . . . . . . . . . . . . . . . . . . .13

AAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

AASA . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

AASASL . . . . . . . . . . . . . . . . . . . . . . . . . . .7

AASSL . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

AAZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

ACSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

E2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11

E3CSA . . . . . . . . . . . . . . . . . . . . . . . . . . .11

E5SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

E7SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

EOOSA . . . . . . . . . . . . . . . . . . . . . . . . . .11

M4AS . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

M5S . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

OOBSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OOCSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OODSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OOSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OOSASL . . . . . . . . . . . . . . . . . . . . . . . . . .6

RRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

SSSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

SSSASL . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Index Tweezers

Suffix

None carbone steel

E (Prefix) ergonomic handles

MBrass, soft material to

avoid damage, no sparks

NNickel-Silver alloy, absolut nicht

PYR Pyroplast coating

RU anti adhesive coating

Sstainless steel

SA, CA special stainless steel,

non-magnetic, acid resistant

SL economy version

TA Titanium, non-magnetic,

lightweight, high temperature

resistant

ZNickel plated

Index Cutters and Pliers

INDEX

Model Page Model Page Model Page

147A . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

500108 . . . . . . . . . . . . . . . . . . . . . . . . . .36

500103A . . . . . . . . . . . . . . . . . . . . . . . . .46

500104A . . . . . . . . . . . . . . . . . . . . . . . . .46

500104AI . . . . . . . . . . . . . . . . . . . . . . . .46

500154A . . . . . . . . . . . . . . . . . . . . . . . . .47

500154AI . . . . . . . . . . . . . . . . . . . . . . . .47

500210E . . . . . . . . . . . . . . . . . . . . . . . . .46

502E30 . . . . . . . . . . . . . . . . . . . . . . . . . .43

503ET . . . . . . . . . . . . . . . . . . . . . . . . . . .30

503ETF . . . . . . . . . . . . . . . . . . . . . . . . . .30

504AE . . . . . . . . . . . . . . . . . . . . . . . . . . .30

505A/BG/BGC/C/E . . . . . . . . . . . . . . . . . .48

50788 . . . . . . . . . . . . . . . . . . . . . . . . . . .45

50789Z . . . . . . . . . . . . . . . . . . . . . . . . . .45

508Z . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

509E . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

510AE . . . . . . . . . . . . . . . . . . . . . . . . . . .42

511E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

512E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

512N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

520E . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

521E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

522E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

522N . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

530E . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

530E15A . . . . . . . . . . . . . . . . . . . . . . . . .36

530S . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

531E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

532N . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

542E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

543E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

544D . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

544E . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

546E . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

547 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

549E . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

552E . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

552S . . . . . . . . . . . . . . . . . . . . . . . . .43, 50

554A . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

554B . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

554E . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

554TX . . . . . . . . . . . . . . . . . . . . . . . . . . .45

555E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

570E . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

572E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

573E . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

573EB . . . . . . . . . . . . . . . . . . . . . . . . . . .36

575E . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

576TX . . . . . . . . . . . . . . . . . . . . . . . . . . .26

576Z . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

577E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

582E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

582EW . . . . . . . . . . . . . . . . . . . . . . . . . .31

592E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

593AE . . . . . . . . . . . . . . . . . . . . . . . .31, 49

595E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

595T . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

595TF . . . . . . . . . . . . . . . . . . . . . . . . . . .25

597E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

599E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

599FO . . . . . . . . . . . . . . . . . . . . . . . . . . .50

599T . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

599TF . . . . . . . . . . . . . . . . . . . . . . . . . . .23

599TFO . . . . . . . . . . . . . . . . . . . . . . .23, 50

611E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

612E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

612N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

622N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

622NA . . . . . . . . . . . . . . . . . . . . . . . . . .24

622NB . . . . . . . . . . . . . . . . . . . . . . . . . . .25

632N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

632NCF . . . . . . . . . . . . . . . . . . . . . . . . . .26

670E . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

670EP . . . . . . . . . . . . . . . . . . . . . . . .32, 49

670EPF . . . . . . . . . . . . . . . . . . . . . . .32, 49

676E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

677E . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

710E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

776E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

792E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

80013C . . . . . . . . . . . . . . . . . . . . . . . . . .47

808G . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

809IC . . . . . . . . . . . . . . . . . . . . . . . . . . .47

812N . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

822N . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

884E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

884EPCM . . . . . . . . . . . . . . . . . . . . . . . .27

886E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

896E . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

1500BSF . . . . . . . . . . . . . . . . . . . . . . . . .34

1503N . . . . . . . . . . . . . . . . . . . . . . . . . . .35

1512N . . . . . . . . . . . . . . . . . . . . . . . . . . .34

1522N . . . . . . . . . . . . . . . . . . . . . . . . . . .34

1522NA . . . . . . . . . . . . . . . . . . . . . . . . .35

1522NB . . . . . . . . . . . . . . . . . . . . . . . . . .35

2040Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53

2041Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53

2044Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53

2052E . . . . . . . . . . . . . . . . . . . . . . . . . . .53

2211P . . . . . . . . . . . . . . . . . . . . . . . . . . .39

2212E . . . . . . . . . . . . . . . . . . . . . . . . . . .27

2222E . . . . . . . . . . . . . . . . . . . . . . . . . . .27

2222EA . . . . . . . . . . . . . . . . . . . . . . . . . .28

2222EB . . . . . . . . . . . . . . . . . . . . . . . . . .28

2232E . . . . . . . . . . . . . . . . . . . . . . . . . . .27

2242E . . . . . . . . . . . . . . . . . . . . . . . . . . .39

2282E . . . . . . . . . . . . . . . . . . . . . . . . . . .33

3000ESD . . . . . . . . . . . . . . . . . . . . . . . . .52

3000KCESD . . . . . . . . . . . . . . . . . . . . . . .55

3000WESD . . . . . . . . . . . . . . . . . . . . . . .54

3008ESD . . . . . . . . . . . . . . . . . . . . . . . . .55

3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

3231 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

3232 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

3303 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

3305Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53

3310Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53

3315 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

3330 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

3503A . . . . . . . . . . . . . . . . . . . . . . . . . . .54

3503B . . . . . . . . . . . . . . . . . . . . . . . . . . .54

3714Z . . . . . . . . . . . . . . . . . . . . . . . . . . .55

3717 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

3740 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

3900KC . . . . . . . . . . . . . . . . . . . . . . . . . .51

EROP155 . . . . . . . . . . . . . . . . . . . . . . . . .40

EROP170 . . . . . . . . . . . . . . . . . . . . . . . . .42

EROP171 . . . . . . . . . . . . . . . . . . . . . . . . .42

EROP172 . . . . . . . . . . . . . . . . . . . . . . . . .41

EROP174 . . . . . . . . . . . . . . . . . . . . . . . . .41

EROP277 . . . . . . . . . . . . . . . . . . . . . . . . .41

EROP280 . . . . . . . . . . . . . . . . . . . . . . . . .41

EROP330 . . . . . . . . . . . . . . . . . . . . . . . . .41

EROP331 . . . . . . . . . . . . . . . . . . . . . . . . .40

EROP355 . . . . . . . . . . . . . . . . . . . . . . . . .40

EROP357 . . . . . . . . . . . . . . . . . . . . . . . . .40

EROP419 . . . . . . . . . . . . . . . . . . . . . . . . .40

Round Head

SIDE CUTTERS

Specifications subject to change without notice.

005 56 851 00 / 03.04 WAL 5.0

GERMANY GREAT BRITAIN

Cooper Tools GmbH Cooper Tools LtD.

Carl-Benz-Str. 2 Suite 15, Coniston House

74354 Besigheim Town Centre

Tel: (07143) 580-0 Washington, Tyne & Wear

Fax: (07143) 580-108 NE38 7RN

Tel: (0191) 419 7700

Fax: (0191) 417 9421

FRANCE ITALY SWITZERLAND

Cooper Tools S.A. Cooper Italia S.p.A. Erem S.A.

25 Rue Maurice Chevalier BP 46 Viale Europa 80 Rue de la Roselière 8

77832 Ozoir-la-Ferrière Cedex 20090 Cusago (MI) 1400 Yverdon les Bains

Tel: (01) 60.18.55.40 Tel: (02) 9033101 Tel: (024) 426 12 06

Fax: (01) 64.40.33.05 Fax: (02) 90394231 Fax: (024) 425 09 77