1.888.KEITHLEY (U.S. only)
www.keithley.com
Side Text
OPTOELECTRONICS TEST
A GREATER MEASURE OF CONFIDENCE
Precision temperature control for TECs with autotuning PID for optimal performance
The Models 2510 and 2510-AT TEC SourceMeter
instruments enhance Keithley’s CW (Continuous
Wave) test solution for high speed LIV (light-
current-voltage) testing of laser diode modules.
These 50W bipolar instruments were developed
in close cooperation with leading manufacturers
of laser diode modules for fiberoptic telecom-
munications networks. Designed to ensure tight
temperature control for the device under test,
the Model 2510 was the first in a line of highly
specialized instruments created for telecommu-
nications laser diode testing. It brings together
Keithley’s expertise in high speed DC sourcing
and measurement with the ability to control the
operation of a laser diode module’s Thermo-
Electric Cooler or TEC (sometimes called a
Peltier device) accurately.
The Model 2510-AT expands the capability of the
Model 2510 by offering autotuning capability. P,
I, and D (proportional, integral, and derivative) values for closed loop temperature control are deter-
mined by the instrument using a modified Zeigler-Nichols algorithm. This eliminates the need for
users to determine the optimal values for these coefficients experimentally. In all other respects, the
Model 2510 and Model 2510-AT provide exactly the same set of features and capabilities.
The SourceMeter Concept
The Model 2510 and Model 2510-AT draw upon Keithley’s unique Source Meter concept, which
combines precision voltage/current sourcing and measurement functions into a single instrument.
SourceMeter instruments provide numerous advantages over the use of separate instruments, includ-
ing lower acquisition and maintenance costs, the need for less rack space, easier system integration
and programming, and a broad dynamic range.
Part of a Comprehensive LIV Test System
In a laser diode CW test stand, the Model 2510 or Model 2510-AT can control the temperature of
actively cooled optical components and assemblies (such as laser diode modules) to within ±0.005°C
of the user-defined setpoint. During testing, the instrument measures the internal temperature of
the laser diode module from any of a variety of temperature sensors, then drives power through
the TEC within the laser diode module in order to maintain its temperature at the desired setpoint.
Figure 1. The capabilities
of the Models 2510 and
2510-AT are intended to
complement those of other
Keithley instruments often
used in laser diode module
LIV testing, including the
Model 2400 and 2420
SourceMeter instruments,
the Model 2502 Dual Photo-
diode Meter, and the Model
2500INT Integrating Sphere.
Thermistor Peltier
2510 or
2510-AT
2400/
2420 2502
Fiber
2500INT
Computer
GPIB
Trigger Link
Ordering Information
2510 TEC SourceMeter
2510-AT Autotuning TEC
SourceMeter
Instrument
Accessories Supplied
User’s Manual, Input/Output
Connector
ACCESSORIES AVAILABLE
2510-RH Resistive Heater Adapter for Model 2510
2510-CAB 4-Wire Unshielded Cable, Phoenix Connector to
Unterminated End
7007-1 Shielded IEEE-488 Cable, 1m (3.3 ft)
7007-2 Shielded IEEE-488 Cable, 2m (6.6 ft)
KPCI-488LPA IEEE-488 Interface/Controller for the PCI Bus
KUSB-488B IEEE-488 USB-to-GPIB Adapter for USB Port
SERVICES AVAILABLE
2510-3Y-EW 1-year factory warranty extended to 3 years from
date of shipment
2510-AT-3Y-EW 1-year factory warranty extended to 3 years from
date of shipment
C/2510-3Y-DATA 3 (Z540-1 compliant) calibrations within 3 years
of purchase for Models 2510, 2510-AT*
*Not available in all countries
2510
2510-AT
TEC SourceMeter® Instrument
Autotuning TEC SourceMeter Instrument
www.keithley.com
1.888.KEITHLEY (U.S. only)
Side Text
OPTOELECTRONICS TEST
A GREATER MEASURE OF CONFIDENCE
Active temperature control is very
important due to the sensitivity
of laser diodes to temperature
changes. If the temperature var-
ies, the laser diode’s dominant
output wavelength may change,
leading to signal overlap and
crosstalk problems.
Autotuning Function
The Model 2510-AT Autotuning
TEC SourceMeter instrument
offers manu facturers the ability
to automatically tune the tem-
perature control loop required for CW testing of
optoelectronic components such as laser diode
modules and thermo-optic switches. This capa-
bility eliminates the need for time-consuming
experimentation to determine the optimal P-I-D
coefficient values.
The Model 2510-AT’s P-I-D Auto-Tune software
employs a modified Ziegler-Nichols algorithm to
determine the coefficients used to control the
P-I-D loop. This algorithm ensures that the final
settling perturbations are damped by 25% each
cycle of the oscillation. The autotuning process
begins with applying a voltage step input to the
system being tuned (in open loop mode) and
measuring several parameters of the system’s
response to this voltage step function. The
system’s response to the step function is illus-
trated in Figure 2. The lag time of the system
response, the maximum initial slope, and the
TAU [63% (1/e)] response time are measured,
then used to generate the Kp (proportional gain
constant), Ki (integral gain constant), and Kd
(derivative gain constant) coefficients.
The autotuning function offers users a choice of
a minimum settling time mode or a minimum
overshoot mode, which provides the Model
2510-AT with the flexibility to be used with a
variety of load types and devices. For example,
when controlling a large area TEC in a test fix-
ture optimized for P, I, and D values, minimum
overshoot protects the devices in the fixture
from damage (Figure 3). For temperature
setpoints that do not approach the maximum
specified temperature for the device under test,
the minimum settling time mode can be used to
speed up the autotuning function (Figure 4).
50W Output
As the complexity of today’s laser diode modules
increases, higher power levels are needed in
temperature controllers to address the module’s
cooling needs during production test. The 50W
• 50W TEC Controller combined
with DC measurement functions
• Fully digital P-I-D control
• Autotuning capability for the
thermal control loop (2510-AT)
• Designed to control temperature
during laser diode module testing
• Wide temperature setpoint range
(–50°C to +225°C) and high
setpoint resolution (±0.001°C)
and stability (±0.005°C)
• Compatible with a variety of
temperature sensor inputs—
thermistors, RTDs, and IC sensors
• Maintains constant temperature,
current, voltage, and sensor
resistance
• AC Ohms measurement function
verifies integrity of TEC
• Measures and displays TEC
parameters during the control
cycle
• 4-wire open/short lead detection
for thermal feedback element
• IEEE-488 and RS-232 interfaces
• Compact, half-rack design
Temp
TMAX
Max.
Initial
Slope 63%
Time
TSTART
TS
L
tLte
Figure 2.
Figure 4.
Figure 3.
Laser Diode TEC Minimum Overshoot
Time (s)
Temp (°C)
27
26
25
24
23
0510 15 20 25
Laser Diode TEC Minimum Settling Time
Time (s)
Temp (°C)
27
26
25
24
23
0510 15 20 25
APPLICATIONS
Control and production testing
of thermoelectric coolers (Peltier
devices) in:
• Laserdiodemodules
• IRcharge-coupleddevice(CCD)
arrays and charge- injection
devices (CID)
• Cooledphotodetectors
• Thermal-opticswitches
• Temperaturecontrolledfixtures
2510
2510-AT
TEC SourceMeter Instrument
Autotuning TEC SourceMeter Instrument
Precision temperature control for TECs with autotuning PID for optimal performance
1.888.KEITHLEY (U.S. only)
www.keithley.com
Side Text
OPTOELECTRONICS TEST
A GREATER MEASURE OF CONFIDENCE
Precision temperature control for TECs with autotuning PID for optimal performance
(5A @ 10V) output allows for higher testing speeds and a wider tempera-
ture setpoint range than other, lower-power solutions.
High Stability P-I-D Control
When compared with other TEC controllers, which use less sophisticated
P-I (proportional-integral) loops and hardware control mechanisms, this
instrument’s software-based, fully digital P-I-D control provides greater
temperature stability and can be easily upgraded with a simple firm-
ware change. The resulting temperature stability (±0.005°C short term,
±0.01°C long term) allows for very fine control over the output wavelength
and optical power of the laser diode module during production testing
of DC characteristics. This improved stability gives users higher confi-
dence in measured values, especially for components or sub-assemblies
in wavelength multiplexed networks. The derivative component of the
instrument’s P-I-D control also reduces the required waiting time between
making measurements at various temperature setpoints. The temperature
setpoint range of –50°C to +225°C covers most of the test requirements for
production testing of cooled optical components and sub-assemblies, with
a resolution of ±0.001°C.
Before the introduction of the Model 2510-AT, configuring test systems for
new module designs and fixtures required the user to determine the best
combination of P, I, and D coefficients through trial-and-error experimenta-
tion. The Model 2510-AT’s autotuning function uses the modified Zeigler-
Nichols algorithm to determine the optimal P, I, and D values automatically.
Adaptable to Evolving DUT Requirements
The Model 2510 and Model 2510-AT are well suited for testing a wide range
of laser diode modules because they are compatible with the types of
temperature sensors most commonly used in these modules. In addition
to 100W, 1kW, 10kW, and 100kW thermistors, they can handle inputs
from 100W or 1kW RTDs, and a variety of solid-state temperature sensors.
This input flexibility ensures their adaptability as the modules being tested
evolve over time.
Programmable Setpoints and Limits
Users can assign temperature, current, voltage, and thermistor resistance
setpoints. The thermistor resistance setpoint feature allows higher cor-
relation of test results with actual performance in the field for laser diode
modules because reference resistors are used to control the temperature
of the module. Programmable power, current, and temperature limits offer
maximum protection against damage to the device under test.
Accurate Real-Time Measurements
Both models can perform real-time measurements on the TEC, including
TEC current, voltage drop, power dissipation, and resistance, providing
valuable information on the operation of the thermal control system.
Peltier (TEC) Ohms Measurement
TEC devices are easily affected by mechanical damage, such as sheer stress
during assembly. The most effective method to test a device for damage
after it has been incorporated into a laser diode module is to perform a
low-level AC (or reversing DC) ohms measurement. If there is a change in
the TEC’s resistance value when compared with the manufacturer’s speci-
fication, mechanical damage is indicated. Unlike a standard DC resistance
measurement, where the current passing through the device can produce
device heating and affect the measured resistance, the reversing DC ohms
method does not and allows more accurate measurements.
Open/Short Lead Detection
Both models of the instrument use a four-wire measurement method to
detect open/short leads on the temperature sensor before testing. Four-
wire measure ments eliminate lead resistance errors on the measured
value, reducing the possibility of false failures or device damage.
Interface Options
Like all newer Keithley instruments, both models of the instrument include
standard IEEE-488 and RS-232 interfaces to speed and simplify system inte-
gration and control.
Optional Resistive Heater Adapter
The Model 2510-RH Resistive
Heater Adapter enables either
model of the instrument to provide
closed loop temperature control
for resistive heater elements, rather
than for TECs. When the adapter is
installed at the instrument’s output
terminal, current flows through the
resistive heater when the P-I-D loop
indicates heating. However, no cur-
rent will flow to the resistive heater
when the temperature loop calls
for cooling. The resistive element is
cooled through radiation, conduc-
tion, or convection.
Figure 5. This graph compares the Model 2510/2510-AT’s A/D con-
verter resolution and temperature stability with that of a leading com-
petitive instrument. While the competitive instrument uses an analog
proportional-integral (P-I) control loop, it displays information in
digital format through a low-resolution analog-to-digital converter. In
contrast, the Model 2510/2510-AT uses a high-precision digital P-I-D
control loop, which provides greater temperature stability, both over
the short term (±0.005°C) and the long term (±0.01°C).
Comparison Data
-0.015
-0.01
-0.005
0
0.005
0.01
One Hour Interval
°C
2510 Measured
Competitor Measured
2510
2510-AT TEC SourceMeter Instrument
Autotuning TEC SourceMeter Instrument
Figure 6. Optional heater adapter
www.keithley.com
1.888.KEITHLEY (U.S. only)
Side Text
OPTOELECTRONICS TEST
A GREATER MEASURE OF CONFIDENCE
Model 2510, 2510-AT specifications
THERMAL FEEDBACK ELEMENT SPECIFICATIONS3
Sensor Type RTD Thermistor Solid State
100 W1 kW100 W1 kW10 kW100 kW
Current
Output (Iss)
Voltage
Output (Vss)
Excitation13 2.5 mA
4 V max 833 µA 2.5 mA
8 V max
833 µA
8 V max
100 µA
8 V max
33 µA
6.6 V max
+13.5 V
833 µA
2.5 mA
15.75V max
Nominal Resistance Range 0–250 W0–2..50 kW0–1 kW0–10 kW0–80 kW0–200 kW
Excitation Accuracy1,3 ±1.5% ±2.9% ±2.9% ±2.9% ±2.9% ±2.9% ±12% ±2.9%
Nominal Sensor
Temperature Range –50° to +250°C –50° to +250°C –50° to +250°C –50° to +250°C –50° to +250°C –50° to +250°C –40° to +100°C –40° to +100°C
Calibration α, β, δ settable α, β, δ settable A, B, C settable A, B, C settable A, B, C settable A, B, C settable Slope & offset Slope & offset
Measurement Accuracy1,3
±(% rdg + offset) 0.04 + 0.07 W2 0.04 + 0.04 W2 0.04 + 0.07 W20.04 + 0.4 W20.02 + 3 W0.04 + 21 W0.03 + 100 nA 0.03 + 500 µV
THERMISTOR MEASUREMENT ACCURACY19
Nominal
Thermistor
Resistance
Accuracy vs. Temperature
0°C 25°C 50°C 100°C
100 W0.021°C 0.035°C 0.070°C 0.27°C
1 kW0.015°C 0.023°C 0.045°C 0.18°C
10 kW0.006°C 0.012°C 0.026°C 0.15°C
100 kW0.009°C 0.014°C 0.026°C 0.13°C
OPEN/SHORTED ELEMENT DETECTION
SOFTWARE LINEARIZATION FOR THERMISTOR
AND RTD
Common Mode Voltage: 30VDC.
Common Mode Isolation: >109W, <1000pF.
Max. Voltage Drop Between Input/Output Sense
Terminals: 1V.
Max. Sense Lead Resistance: 100W for rated accuracy.
Sense Input Impedance: >108W.
GENERAL
NOISE REJECTION:
SPEED NPLC NMRR16 CMRR17
Normal 1.00 60 dB 120 dB1
SOURCE OUTPUT MODES: Fixed DC level.
PROGRAMMABILITY: IEEE-488 (SCPI-1995.0), RS-232,
3 user- definable power-up states plus factory default
and *RST.
POWER SUPPLY: 90V to 260V rms, 50–60Hz, 75W.
EMC: Complies with European Union Directive 98/336/EEC
(CE marking require ments), FCC part 15 class B, CTSPR
11, IEC 801-2, IEC 801-3, IEC 801-4.
VIBRATION: MIL-PRF-28800F Class 3 Random Vibration.
WARM-UP: 1 hour to rated accuracies.
DIMENSIONS, WEIGHT: 89mm high × 213 mm high ×
370mm deep (3½ in × 83⁄8 in × 149⁄16 in). Bench configu-
ration (with handle and feet): 104mm high × 238mm
wide × 370mm deep (41⁄8 in × 93⁄8 in × 149⁄16 in). Net
Weight: 3.21kg (7.08 lbs).
ENVIRONMENT: Operating: 0°–50°C, 70% R.H. up to
35°C. Derate 3% R.H./°C, 35°–50°C. Storage: –25°
to 65°C.
TEC OUTPUT SPECIFICATIONS
OUTPUT RANGE: ±10VDC at up to ±5ADC.15
OUTPUT RIPPLE: <5mV rms9.
AC RESISTANCE EXCITATION: ±(9.6mA ± 90µA).14
TEC MEASUREMENT SPECIFICATIONS3
Function 1 Year, 23°C ±5°C
Operating Resistance 2, 10, 11, 12 ±(2.0% of rdg + 0.1W)
Operating Voltage 2,10 ±(0.1% of rdg + 4mV)
Operating Current10 ±(0.4% of rdg + 8mA)
AC Resistance 2, 18 ±(0.10% of rdg + 0.02W)
OPEN SHORTED THERMOELECTRIC DETECTION
LOAD IMPEDANCE: Stable into 1µF typical.
COMMON MODE VOLTAGE: 30VDC maximum.
COMMON MODE ISOLATION: >10 9W, <1500pF.
MAX. VOLTAGE DROP BETWEEN INPUT/OUTPUT SENSE TERMINALS: 1V.
MAX. SENSE LEAD RESISTANCE: 1W for rated accuracy.
MAX. FORCE LEAD RESISTANCE: 0.1W.
SENSE INPUT IMPEDANCE: > 400kW.
SPECIFICATIONS
The Models 2510 and 2510-AT TEC SourceMeter instruments are designed to:
• ControlthepowertotheTECtomaintainaconstanttemperature,current,voltage,orthermis-
tor resistance.
• MeasuretheresistanceoftheTEC.
• ProvidegreatercontrolandflexibilitythroughasoftwareP-I-Dloop.
CONTROL SYSTEM SPECIFICATIONS
SET: Constant Peltier Temperature, Constant Peltier Voltage, Constant Peltier Current. Constant
Thermistor Resistance.
CONTROL METHOD: Programmable software PID loop. Proportional, Integral, and Derivative
gains independently program mable.
SETPOINT SHORT TERM STABILITY: ±0.005°C rms1,6,7.
SETPOINT LONG TERM STABILITY: ±0.01°C1,6,8.
SETPOINT RANGE: –50°C to 225°C.
UPPER TEMPERATURE LIMIT: 250°C max.
LOWER TEMPERATURE LIMIT: –50°C max.
SETPOINT RESOLUTION: ±0.001°C, <±400µV, <±200µA 0.01% of nominal (25°C) thermistor
resistance.
HARDWARE CURRENT LIMIT: 1.0A to 5.25A ±5%.
SOFTWARE VOLTAGE LIMIT:±0.5 to 10.5V ±5%.
NOTES
1. Model 2510 and device under test in a regulated ambient temperature
of 25°C.
2. With remote voltage sense.
3. 1 year, 23°C ±5°C.
4. With ILoad = 5A and VLoad = 0V.
5. With ILoad = 5A and VLoad = 10V.
6. With 10kW thermistor as sensor.
7. Short term stability is defined as 24 hours with Peltier and Model 2510
at 25°C ±0.5°C.
8. Long term stability is defined as 30 days with Peltier and Model 2510 at
25°C ±0.5°C.
9. 10Hz to 10MHz measured at 5A output into a 2W load.
10. Common mode voltage = 0V (meter connect enabled, connects Peltier
low output to thermistor measure circuit ground). ±(0.1% of rdg. +
0.1W) with meter connect disabled.
11. Resistance range 0W to 20W for rated accuracy.
12. Current through Peltier > 0.2A.
13. Default values shown, selectable values of 3µA, 10µA, 33µA, 100µA,
833µA, 2.5mA. Note that temperature control performance will
degrade at lower currents.
14. AC ohms is a dual pulsed meas urement using current reversals avail-
able over bus only.
15. Settable to <400µV and <200µA in constant V and constant I mode
respectively.
16. For line frequency ±0.1%.
17. For 1kW unbalance in LO lead.
18. Resistance range 0W to 100W for rated accuracy.
19.
Accuracy figures represent the uncertainty that the Model 2510 may add
to the temperature measurement, not including thermistor uncertainty.
These accuracy figures are for thermistors with typical A,B,C constants.
2510
2510-AT TEC SourceMeter Instrument
Autotuning TEC SourceMeter Instrument
