Fluke 500 Series Battery Analyzers Technical Data Intelligent test probe with integrated LCD display Reduced testing complexity, a simplified workflow and an intuitive user interface provide a new level of ease-of-use in battery testing. The new Fluke 500 Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications. The intuitive user interface, compact design and rugged construction ensure optimum performance, test results and reliability. Fluke 500 Series Battery Analyzers cover a broad range of battery test functions ranging from DC voltage and resistance tests to full condition testing using an automated string function testing and the test probe integrated infra-red temperature measurement system. 500 Series Battery Analyzers are designed for measurements on stationary batteries of all types. * Key measurements: Battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and battery temperature. * Sequence measurement mode: Automatic or manual sequence testing of battery strings with automatic measurement storage including voltage, resistance and temperature (with BTL21 intelligent test probe). * Comprehensive logging: All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis. * Optimized user interface: Quick, guided setup ensures you're capturing the right data every time, and the combined visual and audio feedback cues reduce the risk of measurement confusion. * Threshold comparison: Configure multiple reference values and thresholds for resistance and voltage. Comparison result feedback after each measurement via visual and verbal cues. * Ergonomic test leads: Rugged coaxial two pole kelvin test pins with remote SAVE button reduce test time and increase efficiency. * Test probe extenders: Long reach probes for double stacked cells. * Intelligent test probe set (BT520 and BT521): Integrated LCD display, infrared temperature measurement (BT521 only), flashlight, verbal audio feedback and captures voltage readings and temperature logging automatically or via integrated save button. * Enhanced data analysis: Quickly compare trends, analyze results and create reports with included battery management software. * Easy reporting: Generate PDF report on the PC software with analysis graphics and data table or quick email format report with csv file on the mobile app. * Wireless communication: For data download and remote display while measuring. Browse and email measurement data via iOS app. * Battery life: 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation. * USB port: For fast data download to supplied data analysis and report management application software. * Highest safety rating in the industry: CAT III 600 V, 1000 V dc max. rated for safe measurements all around the battery power supply equipment. Specifications Functions Range Resolution Accuracy BT510 BT520 BT521 3 m 0.001 m 1%+8 * * * 30 m 0.01 m 0.8 % + 6 * * * 300 m 0.1 m 0.8 % + 6 * * * Battery resistance1 3000 m 1 m 0.8 % + 6 * * * 6V 0.001 V 0.09 % + 5 * * * 60 V 0.01 V 0.09 % + 5 * * * 600 V 0.1 V 0.09 % + 5 * * * 1000 V 1V 0.09 % + 5 Vdc * Vac (45 Hz to 500 Hz with 800 Hz filter) 600 V 0.1 V 2 % + 10 * * * Frequency (displayed with Vac and Aac)2 500 Hz 0.1 Hz 0.5 % + 8 * * * AC voltage ripple (20 KHz Max) 600 mV 0.1 mV 3 % + 20 * * * 6000 mV 1 mV 3 % + 10 * * * 400 A 1A 3.5 % + 2 * 0 C to 60 C 1 C 2 C (4 F) * Adc/Aac (with accessory Fluke i410) Temperature Meter mode 999 records for each measurement position with time stamp Sequence mode Up to 100 profiles and 100 profile templates (Each profile stores up to 450 batteries) with time stamp The measurement is based on ac injection method. The injected source signal is <100 mA, 1 kHz. 2 Trigger level VAC: 10 mV, Aac: 10 A 1 Measurement modes BT510 BT520 BT521 Resistance (m) * * * Battery voltage * * * Voltage dc * * * Voltage ac and frequency (Hz) * * * Ripple volt * * * Temperature of negative battery post * DC and ac current (and frequency) * DMM mode * * * Sequence mode * * * Discharge measurement mode * * * Automatic measurement save * * * * Wireless communication * Memory view 2 Fluke Corporation Fluke 500 Series Battery Analyzers * * General specifications Size (HxWxD) 22 cm x 10.3 cm x 5.8 cm (9 in x 4 in x 2 in) Weight 850 g (1.9 lb) Screen dimensions 7.7 cm x 5.6 cm (3 in x 2.2 in) Interface USB mini Environment specifications Operating temperature 0 C to 40 C Storage temperature -20 C to 50 C Lithium-ion battery charging temperature 0 C to 40 C Operating humidity Non-condensing (10 C) <=80 % RH (at 10 C to 30 C) <=75 % RH (at 30 C to 40 C) Operating altitude Sea level to 2000 meters Storage altitude Sea level to 12,000 meters IP rating IP40 Radio FCC Class A Vibration requirements MIL-PRF-28800F: Class 2 Drop test requirements 1 meter Temperature coefficients Add 0.1 x specified accuracy for each degree C above 28 C or below 18 C Safety compliance 600 V CAT III EMC IEC 61326 ROHS China, Europe Protection Class 2 Pollution Degree II Battery compliance UN38.3 UL2054 IEC62133 2G per IEC68-2-26, 25G, and 29 3 Fluke Corporation Fluke 500 Series Battery Analyzers Ordering Information Fluke BT510 Basic Battery Analyzer Fluke BT520 Battery Analyzer Fluke BT521 Advanced Battery Analyzer Accessories BTL10 Basic Battery Analyzer Test Leads BTL20 Interactive Battery Analyzer Test Probe BTL21 Interactive Battery Analyzer Test Probe with temperature sensor BTL-A Voltage/Current Probe Adapter C500S Soft carrying case (small) C500L Soft carrying case (large) BC500 AC Power Charger BP500 Lithium-ion battery 3000 mAh TPAK80-4 Magnetic Strap B4WTP 4-wire test pin i410 AC/DC Current Clamp L300 LED flashlight BCR Zero ohm calibration resistor Items supplied with each model Equipment Qty. BT510 BT520 BT521 Battery analyzer 1 * * * 4-wire test pin (set) 1 * * * BTL10 Basic Test Lead (set) 1 * * * TL175 TwistGuardTM Test Leads with adapter 1 * * * L300 Attachable LED Flashlight 2 * * BTL20 Intelligent Test Probe Set, with extender (no temperature sensor) 1 * BTL21 Intelligent Test Probe set, with extender and temperature sensor 1 i410 AC/DC Current Clamp 1 BP500 7.4 V 3000 mAh lithium-ion battery 1 * * * BC500 18 V AC Charger 1 * * * Standard mini-b USB cable (cable length:1 m) 1 * * * Shoulder strap 1 * * * Belt strap 1 * * * Magnetic hanging strap 1 * * * FlukeView(R) Battery Management (CD) containing USB driver and manuals in all languages 1 * * * Soft carrying case 1 * * * Spare fuses 2 * * * * * Paper battery tags 100 * * Fluke. Keeping your world up and running.(R) Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com (c)2014 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 5/2014 6002814B_EN Modification of this document is not permitted without written permission from Fluke Corporation. 4 Fluke Corporation Fluke 500 Series Battery Analyzers Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fluke: BTL20 BTL21 BP500 FLUKE-BT521 FLUKE-BT520 BTL-A BT500-PROBE-TIP BC500 FLUKE-BT510 BTL10