TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) Photointerrupter Infrared LED + Photo IC TLP1201A(F), TLP1201A(C1,F), TLP1201A(C2,F) Lead Free Product Copier, Laser Beam Printer Facsimile, Printer Playing Equipment, FA Equipment Various Position Detection Sensor The TLP1201A(F), TLP1201A(C1,F) and TLP1201A(C2,F) are digital output photointerrupters having connectors with an GaAs infrared LED and a high sensitivity and low current consumption Si photo IC combined. The output becomes high level when the light is shielded. * One side mounting type * Supply voltage: 5V * Digital output (Open collector) * Gap: 5mm * Resolution: Slit width 0.5mm * Low current consumption: ICC = 17.5mA (max.) * UL recognized PWB adopted: UL94V-0 * Material of the case: Polycarbonate * Connectors TLP1201A(F)............171825-3 (Tyco Electronics AMP,Ltd. made EI connector) TLP1201A(C1,F)..... 5267-03A (Molex Japan Co.,Ltd. made connector) TLP1201A(C2,F)..... B3P-SHF-1AA (Japan Solderless Terminal MFG. made NH connector) Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Supply voltage VCC 6 V Output voltage VO 28 V Low level output current IOL 50 mA Low level output current derating (Ta > 25C) IOL / C -0.67 mA / C Operating temperature range Topr -25~75 C Storage temperature range Tstg -40~85 C 1 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) TLP1201A(F) TOSHIBA TLP1201A(C1,F) 11-14C5 TOSHIBA 11-14C6 Weight: 2.6 g (typ.) TLP1201A(C2,F) Product Indication Model name P1201A Monthly production lot Production month (Jan,-Dec.are indicated by alphabets of A-L) Production year (last digit of a.d.is indicated) Connector classification Stamp color: Silver Abbreviation Connector Classification TLP1201A(F) P1201A No Indicated TLP1201A(C1,F) P1201A C1 TLP1201A(C2,F) P1201A C2 Type TOSHIBA 11-14C7 2 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VCC 4.5 5.0 5.5 V Output voltage VO 5 17 V Low level output current IOL 16 mA Operating temperature range Topr -25 75 C Opto-electrical Characteristics (Unless Otherwise Specified, Ta=-25~75C, VCC=5V10%) Characteristic Symbol Supply voltage Supply current Output Voltage Test Condition Min. VCC Typ. Max. Unit V 4.5 5 5.5 High Level ICCH Shutter In 17.5 Low Level ICCL Without Shutter 17.5 High Level VOH 0.9VCC 0.07 0.35 Shutter In, RL = 47k Without Shutter, Low Level VOL IOL = 16mA, Ta = 25C mA V V Without Shutter, IOL = 16mA 0.4 Peak emission wavelength P Ta = 25C, LED Side 940 nm Peak sensitivity wavelength P Ta = 25C, Photo IC Side 900 nm 3000 Hz 8 Response frequency f Rise Time tr Fall Time tf Ta = 25C, RL = 47k (Note) 90% 10% tr s tf 0.03 (Note) A value measured when the disc shown in the following figure was rotated. No DC current should be output. 2.5mm Optical Shutter Disc Sensor Center 0.5mm 3 0.5mm 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) Terminal Strength (Ta = 25C) Characteristic Test Condition Direction Pull Weight Time Direction Bend Weight Time Limit A 19.6N No defect of electrical characteristics B 5s / once A B 9.8N 5s / thrice Precaution 1. During 100s after turning on VCC, output voltage changes for stabilizing the inner circuit. 2. When installing, avoid to work by holding the connector by hand. Always, install by holding the main body of the element while assuring the mounting board is not warped or twisted.The connectors shall be inserted or pulled out at normal temperature. 3. Screw shall be tightened to clamping torque of 0.59Nm. 4. The container is made of polycarbonate. Polycarbonate is usually stable with acid, alcohol, and aliphatic hydrocarbons however, with petrochemicals (such as benzene, toluene, and acetone), alkali, aromatic hydrocarbons, or chloric hydrocarbons, polycarbonate becomes cracked, swollen, or melted. Please take care when choosing a packaging material by referencing the table below. < Chemicals To Avoid With Polycarbonate > Phenomenon A B C D Chemicals Little deterioration but staining Nitric acid (low concentration), hydrogen peroxide, chlorine Cracked, crazed, or swollen Acetic acid(70% or more) Gasoline Methyl ethyl ketone, ehtyl acetate, butyl acetate Ethyl methacrylate, ethyl ether, MEK Acetone, m-amino alcohol, carbon tetrachloride Carbon disulfide, trichloroethylene, cresol Thinners, oil of turpentine Triethanolamine, TCP, TBP Melted Concentrated sulfuric acid Benzene Styrene, acrylonitrile, vinyl acetate Ethylenediamine, diethylenediamine (Chloroform, methyl chloride, tetrachloromethane, dioxane, 1,2-dichloroethane) ( ): Used as solvent. Decomposed Ammonia water Other alkali 4 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) Recommendable Matched Connector TLP1201A(F) Tyco Electronics AMP,Ltd. made EI series connector (Standard type) Housing Natural Color Black Blue Green Red 171822-3 2-171822-3 4-171822-3 6-171822-3 8-171822-3 Type No. Product Form Material AWG Size Insulation Diameter AWG20~26 1.1~1.9mm AWG26~30 1.0~1.4mm 170204-1 170204-2 Terminal 170262-1 170262-2 170205-1 170205-2 170263-1 170263-2 Loosen Linked Loosen Linked Brass Phosphor Bronze Brass Phosphor Bronze Brass Phosphor Bronze Brass Phosphor Bronze Tyco Electronics AMP,Ltd. made EI series connector (Low profile type) Housing Terminal Natural Color Black Blue Green Red 172142-3 2-172142-3 4-172142-3 6-172142-3 8-172142-3 Type No. Product Form Material AWG Size Insulation Diameter 170369-1 Loosen 170354-1 Linked AWG22~26 1.1~1.9mm 170370-1 Loosen 170355-1 Linked AWG26~30 1.0~1.5mm Material AWG Size Insulation Diameter Phosphor Bronze AWG22~28 1.9mm max AWG Size Insulation Diameter AWG22~26 1.3~1.7mm AWG28~30 1.0~1.2mm Phosphor Bronze TLP1201A(C1,F) Molex Japan Co.,Ltd. made connector (Low profile type) Housing 5264-03 Type No. Product Form 5263PBTL Loosen 5263PBT Linked Terminal TLP1201A(C2,F) Japan Solderless Terminal MFG. made NH connector Housing H3P-SHF-AA Type No. Terminal Product Form Material SHF-001T-0.8SS SHF-001T-0.8BS SHF-002T-0.8SS Brass Loosen SHF-002T-0.8BS Phosphor Bronze Brass Phosphor Bronze For details of the connectors, please refer to the connector maker. 5 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) Package Dimensions: TOSHIBA 11-14C5 Unit in mm Slit Width Sensor Center ( ) : Reference Value Weight: 2.6g(typ.) Pin Connection 1. VCC VOL. REG. 3. OUT AMP 2. GND 6 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) Package Dimensions: TOSHIBA 11-14C6 Unit in mm Slit Width Sensor Center ( ) : Reference Value Weight: 2.6g(typ.) Pin Connection 1. VCC VOL. REG. 3. OUT AMP 2. GND 7 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) Package Dimensions: TOSHIBA 11-14C7 Unit in mm Slit Width Sensor Center ( ) : Reference Value Weight: 2.6g(typ.) Pin Connection 1. VCC VOL. REG. 3. OUT AMP 2. GND 8 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) VOL - IOL IOL - Ta 60 Low level output voltage VOL 50 (mA) 40 30 IOL Allowable low level output current (V) 0.3 20 10 0 -20 0 20 40 80 60 Ambient temperature Ta 0.03 0.01 0 5 3 10 100 50 30 Low level output current IOL (mA) Detecting Position Characteristics(2) (typ.) VCC = 5 V RL = 10 k Output "H" Ta = 25 C 0.05 (C) Detecting Position Characteristics(1) VCC = 5 V 0.1 0.005 100 (typ.) Output "H" Ta = 25 C VCC = 5 V RL = 10 k Ta = 25 C (typ.) Detecting Position +0.7 d=15-1.7mm Shutter Detecting Position d=00.3mm d 0 d + Shutter Output Output "L" "L" -2 -1 Distance 0 d 1 2 14 (mm) 15 Distance 9 16 d 17 18 (mm) 2004-02-13 TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F) RESTRICTIONS ON PRODUCT USE 030619EAC * The information contained herein is subject to change without notice. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. 10 2004-02-13