TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
1
Photointerrupter Infrared LED + Photo IC
TLP1201A(F), TLP1201A(C1,F), TLP1201A(C2,F)
Lead Free Product
Copier, Laser Beam Printer
Facsimile, Printer
Playing Equipment, FA Equipment
Various Position Detection Sensor
The TLP1201A(F), TLP1201A(C1,F) and TLP1201A(C2,F) are digital output photointerrupters having connectors
with an GaAs infrared LED and a high sensitivity and low current consumption Si photo IC combined.
The output becomes high level when the light is shielded.
One side mounting type
Supply voltage: 5V
Digital output (Open collector)
Gap: 5mm
Resolution: Slit width 0.5mm
Low current consumption: ICC = 17.5mA (max.)
UL recognized PWB adopted: UL94V0
Material of the case: Polycarbonate
Connectors
TLP1201A(F)............1718253 (Tyco Electronics AMP,Ltd. made EI connector)
TLP1201A(C1,F)..... 526703A (Molex Japan Co.,Ltd. made connector)
TLP1201A(C2,F)..... B3PSHF1AA (Japan Solderless Terminal MFG. made NH connector)
Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Supply voltage VCC 6 V
Output voltage VO 28 V
Low level output current IOL 50 mA
Low level output current
derating (Ta > 25°C) IOL / °C 0.67 mA / °C
Operating temperature range Topr 25~75 °C
Storage temperature range Tstg 40~85 °C
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
2
TOSHIBA 1114C5 TOSHIBA 1114C6
TOSHIBA 1114C7
Weight: 2.6 g (typ.)
Product Indication
Type Abbreviation
Connector
Classification
TLP1201A(F) P1201A No Indicated
TLP1201A(C1,F) P1201A C1
TLP1201A(C2,F) P1201A C2
Production month
(Jan,-Dec.are indicated by alphabets of A-L)
Production year (last digit of a.d.is indicated)
Model name
Monthly production lot
Connector classification
P1201A
Stamp color: Silver
TLP1201A(F)
TLP1201A(C1,F)
TLP1201A(C2,F)
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
3
Recommended Operating Conditions
Characteristic Symbol Min. Typ. Max. Unit
Supply voltage VCC 4.5 5.0 5.5 V
Output voltage VO 5 17 V
Low level output current IOL 16 mA
Operating temperature range Topr 25 75 °C
Optoelectrical Characteristics (Unless Otherwise Specified, Ta=25~75°C, VCC=5V±10%)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Supply voltage VCC 4.5 5 5.5 V
High Level ICCH Shutter In 17.5
Supply current
Low Level ICCL Without Shutter 17.5
mA
High Level VOH Shutter In, RL = 47k 0.9VCC V
Without Shutter,
IOL = 16mA, Ta = 25°C 0.07 0.35
Output Voltage
Low Level VOL
Without Shutter, IOL = 16mA 0.4
V
Peak emission wavelength λP Ta = 25°C, LED Side 940
nm
Peak sensitivity wavelength λP Ta = 25°C, Photo IC Side 900
nm
Response frequency f 3000 Hz
Rise Time tr 8
Fall Time tf
Ta = 25°C, RL = 47k (Note)
0.03
µs
(Note) A value measured when the disc shown in the following figure was rotated. No DC current should be output.
Optical Shutter Disc
Sensor Center
0.5mm 0.5mm
2.5mm
90%
10%
tf
tr
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
4
Terminal Strength
(Ta = 25°C)
Characteristic Test Condition Limit
Direction A
Weight 19.6N
Pull
Time 5s / once
Direction B
Weight 9.8N
Bend
Time 5s / thrice
No defect of
electrical
characteristics
Precaution
1. During 100µs after turning on VCC, output voltage changes for stabilizing the inner circuit.
2. When installing, avoid to work by holding the connector by hand. Always, install by holding the main body of the
element while assuring the mounting board is not warped or twisted.The connectors shall be inserted or pulled
out at normal temperature.
3. Screw shall be tightened to clamping torque of 0.59Nm.
4. The container is made of polycarbonate. Polycarbonate is usually stable with acid, alcohol, and aliphatic
hydrocarbons however, with petrochemicals (such as benzene, toluene, and acetone), alkali, aromatic
hydrocarbons, or chloric hydrocarbons, polycarbonate becomes cracked, swollen, or melted. Please take care
when choosing a packaging material by referencing the table below.
< Chemicals To Avoid With Polycarbonate >
Phenomenon Chemicals
A Little deterioration
but staining
Nitric acid (low concentration), hydrogen peroxide,
chlorine
B Cracked, crazed, or
swollen
Acetic acid(70% or more)
Gasoline
Methyl ethyl ketone, ehtyl acetate, butyl acetate
Ethyl methacrylate, ethyl ether, MEK
Acetone, mamino alcohol, carbon tetrachloride
Carbon disulfide, trichloroethylene, cresol
Thinners, oil of turpentine
Triethanolamine, TCP, TBP
C Melted
( ): Used as solvent.
Concentrated sulfuric acid
Benzene
Styrene, acrylonitrile, vinyl acetate
Ethylenediamine, diethylenediamine
(Chloroform, methyl chloride, tetrachloromethane,
dioxane, 1,2dichloroethane)
D Decomposed Ammonia water
Other alkali
B
A
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
5
Recommendable Matched Connector
TLP1201A(F)
Tyco Electronics AMP,Ltd. made EI series connector (Standard type)
Natural Color Black Blue Green Red
Housing
1718223 21718223 41718223 61718223 81718223
Type No. Product Form Material AWG Size Insulation
Diameter
1702041 Brass
1702042
Loosen
Phosphor Bronze
1702621 Brass
1702622
Linked
Phosphor Bronze
AWG20~26 1.1~1.9mm
1702051 Brass
1702052
Loosen
Phosphor Bronze
1702631 Brass
Terminal
1702632
Linked
Phosphor Bronze
AWG26~30 1.0~1.4mm
Tyco Electronics AMP,Ltd. made EI series connector (Low profile type)
Natural Color Black Blue Green Red
Housing
1721423 21721423 41721423 61721423 81721423
Type No. Product Form Material AWG Size Insulation
Diameter
1703691 Loosen
1703541 Linked
AWG22~26 1.1~1.9mm
1703701 Loosen
Terminal
1703551 Linked
Phosphor Bronze
AWG26~30 1.0~1.5mm
TLP1201A(C1,F)
Molex Japan Co.,Ltd. made connector (Low profile type)
Housing 526403
Type No. Product Form Material AWG Size Insulation
Diameter
5263PBTL Loosen
Terminal
5263PBT Linked
Phosphor Bronze AWG22~28 1.9mm max
TLP1201A(C2,F)
Japan Solderless Terminal MFG. made NH connector
Housing H3PSHFAA
Type No. Product Form Material AWG Size Insulation
Diameter
SHF001T0.8SS Brass
SHF001T0.8BS Phosphor Bronze
AWG22~26 1.3~1.7mm
SHF002T0.8SS Brass
Terminal
SHF002T0.8BS
Loosen
Phosphor Bronze
AWG28~30 1.0~1.2mm
For details of the connectors, please refer to the connector maker.
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
6
Package Dimensions: TOSHIBA 1114C5
Unit in mm
Weight: 2.6g(typ.)
Pin Connection
Slit Width
Sensor Center
( ) : Reference Value
VOL. REG.
AMP
1. VCC
3. OUT
2. GND
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
7
Package Dimensions: TOSHIBA 1114C6
Unit in mm
Weight: 2.6g(typ.)
Pin Connection
Slit Width
Sensor Center
( ) : Reference Value
VOL. REG.
AMP
1. VCC
3. OUT
2. GND
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
8
Package Dimensions: TOSHIBA 1114C7
Unit in mm
Weight: 2.6g(typ.)
Pin Connection
Slit Width
Sensor Center
( ) : Reference Value
VOL. REG.
AMP
1. VCC
3. OUT
2. GND
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
9
IOL – Ta
Ambient temperature Ta (°C)
Allowable low level output current
I
OL (mA)
60
-20 100
50
40
30
20
10
0
020 40 60 80
V
OL – IOL (typ.)
Low level output current IOL (mA)
Low level output voltage VOL (V)
0.3
0.0050 100
0.1
0.05
0.03
0.01
3 5 10 30 50
VCC = 5 V
Ta = 25 °C
Detecting Position
Characteristics(1) (typ.)
Distance d (mm)
-2 -1 0 1 2
VCC = 5 V
RL = 10 k
Ta = 25 °C
Detecting
d=0±0.3mm
d
0 +
-
Output
“H
Output
“L”
Shutter
Position
Detecting Position
Characteristics(2) (typ.)
Distance d (mm)
14 15 16 17 18
VCC = 5 V
RL = 10 k
Ta = 25 °C
Shutter
Detecting
+0.7
d=15-1.7mm
d
Output
“H”
Output
“L”
Position
TLP1201A(F),TLP1201A(C1,F),TLP1201A(C2,F)
2004-02-13
10
The information contained herein is subject to change without notice.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
030619EAC
RESTRICTIONS ON PRODUCT USE