TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TOSHIBA LED Lamps TLRU1002A(T02),TLSU1002A(T02),TLOU1002A(T02) TLAU1002A(T02),TLYU1002A(T02),TLGU1002A(T02) TLPGU1002A(T02) Unit: mm Panel Circuit Indicator * Surface-mount devices * 2.0 (L) x 1.25 (W) x 1.1 (H) mm * InGaAP LEDs * Replacing standard-intensity LEDs with high-intensity ones helps increase the brightness or reduce the power consumption of end products. * Colors: red, orange, amber, yellow, green, pure green * Applications: Backlighting source for battery-powered equipment Pilot lamps for mobile handsets Low-power electronic equipment, etc. * Standard embossed tape packing: T02 (3000 pcs / reel) 8-mm tape reel Color and Material JEITA TOSHIBA Part Number Color TLRU1002A Red TLSU1002A Red TLOU1002A Orange TLAU1002A Amber TLYU1002A Yellow TLGU1002A Green TLPGU1002A JEDEC 4-1D1 Weight: 0.002 g (typ.) Material InGaAP Pure Green 1 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) Absolute Maximum Ratings (Ta = 25C) Forward Current IF (mA) Please see Note 1 Part Number Reverse Voltage VR (V) Power Dissipation PD (mW) TLRU1002A Operation Temperature Topr (C) Storage Temperature Tstg (C) -40 to 85 -40 to 100 60 TLSU1002A TLOU1002A 25 TLAU1002A 4 62.5 TLYU1002A TLGU1002A TLPGU1002A Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Forward current derating IF - Ta Allowable forward current IF (mA) 40 30 20 10 0 0 20 40 60 Ambient temperature 80 Ta 100 (C) Electrical Characteristics (Ta = 25C) Min Typ. Min TLRU1002A 1.6 2.0 2.4 TLSU1002A 1.6 2.0 2.4 TLOU1002A 1.6 2.1 2.5 TLAU1002A 1.6 2.1 2.5 TLYU1002A 1.6 2.1 2.5 TLGU1002A 1.6 2.1 2.5 TLPGU1002A 1.6 2.1 2.5 Unit Reverse Current IR Forward Voltage VF Part Number V IF Max VR 20 50 4 mA A V 2 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) Optical Characteristics-1 (Ta = 25C) Part Number Luminous Intensity IV Available Iv rank Min Typ. Max IF Please see Note 2 TLRU1002A 4.76 45 20 H/J/K/L TLSU1002A 27.2 60 20 L/M/N/P TLOU1002A 27.2 78 20 L/M/N/P TLAU1002A 8.5 30 20 J/K/L/M TLYU1002A 8.5 30 20 J/K/L/M TLGU1002A 8.5 30 20 J/K/L/M TLPGU1002A 1.53 6 20 F/G/H/J mcd mcd mcd mA Unit Note 2: The specification on the above table is used for Iv classification of LEDs in Toshiba facility. Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned. Rank Luminous Intensity IV Min Min F 1.53 4.14 G 2.72 7.36 H 4.76 12.9 J 8.5 23 K 15.3 41.4 L 27.2 73.6 M 47.6 129 N 85 230 P 153 414 Unit mcd mcd Optical Characteristics-2 (Ta = 25C) Emission Spectrum Part Number Peak Emission Wavelength p Min Typ. Max Dominant Wavelength d Typ. Min Typ. Max TLRU1002A 644 15 624 630 638 TLSU1002A 636 17 617 623 631 TLOU1002A 612 15 599 605 613 TLAU1002A 596 13 585 592 599 TLYU1002A 590 15 580 587 595 TLGU1002A 574 13 565 571 576 TLPGU1002A 562 13 557 564 Unit nm nm nm IF 20 mA Cautions * * This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light. This product is designed as a general display light source usage, and it has applied the measurement standard that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application (ex. Light source for sensor, optical communication and etc) except general display light source. 3 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TLRU1002A IF - V F IV - IF (typ.) 100 IV (mcd) Ta = 25C 50 30 Luminous intensity Forward current IF (mA) Ta = 25C 10 5 3 1 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 5 3 3 5 10 30 IF 50 100 (mA) Wavelength characteristic (typ.) (typ.) 1.0 IF = 20 mA Ta = 25C Relative luminous intensity IV Relative luminous intensity 10 Forward current 1 0.5 0.3 0.1 30 (V) IV - Tc 3 50 1 1 2.3 2.2 10 5 (typ.) 100 -20 0 20 40 Case temperature 60 Tc 80 0.8 0.6 0.4 0.2 0 580 100 (C) 600 620 640 Wavelength 4 660 680 700 (nm) 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TLSU1002A IF - V F IV - IF (typ.) 100 IV (mcd) Ta = 25C 50 30 Luminous intensity Forward current IF (mA) Ta = 25C 10 5 3 1 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 5 3 3 5 10 30 IF 50 100 (mA) Wavelength characteristic (typ.) (typ.) 1.0 IF = 20 mA Ta = 25C Relative luminous intensity IV Relative luminous intensity 10 Forward current 1 0.5 0.3 0.1 30 (V) IV - Tc 3 50 1 1 2.3 2.2 10 5 (typ.) 100 -20 0 20 40 Case temperature 60 Tc 80 0.8 0.6 0.4 0.2 0 580 100 (C) 600 620 640 Wavelength 5 660 680 700 (nm) 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TLOU1002A IF - V F IV - IF (typ.) 100 (typ.) 300 IV (mcd) 50 30 Ta = 25C 100 50 Luminous intensity Forward current IF (mA) Ta = 25C 10 5 3 1 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 3 5 10 30 IF 50 100 (mA) Wavelength characteristic (typ.) (typ.) 1.0 IF = 20 mA Ta = 25C Relative luminous intensity IV Relative luminous intensity 3 1 2.3 1 0.5 0.3 0.1 5 Forward current IV - Tc 3 10 (V) 10 5 30 -20 0 20 40 Case temperature 60 Tc 80 0.8 0.6 0.4 0.2 0 540 100 (C) 560 580 600 Wavelength 6 620 640 660 (nm) 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TLAU1002A IF - V F IV - IF (typ.) 100 IV (mcd) 50 30 Luminous intensity Forward current IF (mA) Ta = 25C 10 5 3 1 1.7 1.8 1.9 2.0 Forward voltage VF 5 3 1 3 5 10 30 IF 50 100 (mA) Wavelength characteristic (typ.) (typ.) 1.0 IF = 20 mA Ta = 25C Relative luminous intensity IV Relative luminous intensity 10 Forward current 1 0.5 0.3 0.1 30 (V) IV - Tc 3 50 1 2.3 2.2 2.1 10 5 (typ.) 100 -20 0 20 40 Case temperature 60 Tc 80 0.8 0.6 0.4 0.2 0 540 100 (C) 560 580 600 Wavelength 7 620 640 660 (nm) 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TLYU1002A IF - V F IV - IF (typ.) 100 Ta = 25C IV (mcd) 30 Luminous intensity Forward current IF (mA) Ta = 25C 50 10 5 3 1 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 5 3 3 5 10 30 IF 50 100 (mA) Wavelength characteristic (typ.) (typ.) 1.0 IF = 20 mA Ta = 25C Relative luminous intensity IV Relative luminous intensity 10 1 1 2.3 1 0.5 0.3 0.1 30 Forward current IV - Tc 3 50 (V) 10 5 (typ.) 100 -20 0 20 40 Case temperature 60 Tc 80 0.8 0.6 0.4 0.2 0 540 100 (C) 560 580 600 Wavelength 8 620 640 660 (nm) 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TLGU1002A IF - V F IV - IF (typ.) 100 Ta = 25C IV (mcd) 50 30 Luminous intensity Forward current IF (mA) Ta = 25C 10 5 3 1 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 5 3 3 5 10 30 IF 50 100 (mA) Wavelength characteristic (typ.) 1.0 (typ.) IF = 20 mA Ta = 25C Relative luminous intensity IV Relative luminous intensity 10 1 1 2.3 1 0.5 0.3 0.1 30 Forward current IV - Tc 3 50 (V) 10 5 (typ.) 100 -20 0 20 40 Case temperature 60 Tc 80 0.8 0.6 0.4 0.2 0 540 100 (C) 560 580 Wavelength 9 600 620 (nm) 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) TLPGU1002A IF - V F IV - IF (typ.) 100 Ta = 25C IV (mcd) 30 Luminous intensity Forward current IF (mA) Ta = 25C 50 10 5 3 1 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 0.5 0.3 3 5 10 30 IF 50 100 (mA) Wavelength characteristic (typ.) 1.0 (typ.) IF = 20 mA Ta = 25C Relative luminous intensity IV Relative luminous intensity 1 0.1 1 2.3 1 0.5 0.3 0.1 3 Forward current IV - Tc 3 5 (V) 10 5 (typ.) 10 -20 0 20 40 Case temperature 60 Tc 80 0.8 0.6 0.4 0.2 0 520 100 (C) 540 560 Wavelength 10 580 600 (nm) 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) Radiation Pattern Horizontal to polarity Vertical to polarity (typ.) (typ.) 11 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) Packaging These LED devices are packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air before soldering and they should therefore be stored under the following conditions: 1. This moisture proof bag may be stored unopened within 12 months at the following conditions. Temperature: 5C to 30C Humidity: 90% (max) 2. After opening the moisture proof bag, the devices should be assembled within 168 hours in an environment of 5C to 30C/70% RH or below. When performing lead(Pb)-free soldering, the devices should be assembled within 72 hours in an environment of 5C to 30C/70% RH or below. 3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to pink) or the expiration date has passed, the devices should be baked in taping with reel. After baking, use the baked devices within 72 hours, but perform baking only once. Baking conditions: 605C, for 12 to 24 hours. Expiration date: 12 months from sealing date, which is imprinted on the same side as this label affixed. 4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting. Furthermore, prevent the devices from being destructed against static electricity for baking of it. 5. If the packing material of laminate would be broken, the air tightness would deteriorate. Therefore, do not throw or drop the packed devices. Mounting Method Soldering * Reflow soldering (example) Temperature profile for Pb soldering (example) Package surface temperature (C) 10 s max(*) 240C max(*) (*) 140 to 160C max 4C/s max(*) 4C/s max(*) (*) 60 to 120 s max Time * * * * * (s) The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under the above conditions. Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of opening the package. Second reflow soldering In case of second reflow soldering should be performed within 168 h of the first reflow under the above conditions. Storage conditions before the second reflow soldering: 30C, 70% RH (max) Make any necessary soldering corrections manually. (only once at each soldering point) Soldering iron : 25 W Temperature : 300C or less Time : within 3 s Do not perform wave soldering. 12 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) * Reflow soldering (example) Temperature profile for Pb-free soldering (example) Package surface temperature (C) 5 s max (*) 260C max(*) 4C/s max (*) (*) 150 to 180C max 230C 4C/s max(*) (*) 60 to 120 s max 30 to 50 s max(*) Time * * * * * (s) The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under the above conditions. Please perform the first reflow soldering with reference to the above temperature profile and within 72 h of opening the package. Second reflow soldering In case of second reflow soldering should be performed within 72 h of the first reflow under the above conditions. Storage conditions before the second reflow soldering: 30C, 70% RH (max) Make any necessary soldering corrections manually. (only once at each soldering point) Soldering iron : 25 W Temperature : 300C or less Time : within 3 s Do not perform wave soldering. Recommended soldering pattern 1.2 1.0 Unit: mm 1.2 (1.2) Cleaning When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the recommended conditions). In selecting the one for your actual usage, please perform sufficient review on washing condition, using condition and etc. ASAHI CLEAN AK-225AES KAO CLEAN THROUGH 750H PINE ALPHA ST-100S : (made by ASAHI GLASS) : (made by KAO) : (made by ARAKAWA CHEMICAL) Precaution when mounting Do not apply force to the plastic part of the LED under high-temperature conditions. To avoid damaging the LED plastic, do not apply friction using a hard material. When installing the PCB in a product, ensure that the device does not come into contact with other cmponents. 13 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) Tape Specifications 1. Product number format The type of package used for shipment is denoted by a symbol suffix after the product number. The method of classification is as below. (However, this method does not apply to products whose electrical/optical characteristics differ from standard Toshiba specifications) (1) (2) Tape Type: T02 (4-mm pitch) Example TLRU1002A (T02) Tape type Toshiba product No. 2. Handling precautions Tape material protected against static electricity. However, static electricity may occur depending on quantity of charged static electricity and a device may attach to a tape, or a device may be unstable when peeling a tape cover. (a) Since tape materials may accumulate an electrostatic charge, use an ionizer to neutralize the ambient air. (b) For transport and temporary storage of devices, use containers (boxes and bags) and jigs that are made of anti-static materials or of materials which dissipate electrostatic charge. 3. Tape dimensions Unit: mm Symbol Value Tolerance Symbol Value Tolerance D 1.50 +0.1/-0 P2 2.00 0.05 E 1.75 0.1 W 8.00 0.3 P0 4.00 0.1 P 4.00 0.1 t 0.20 0.05 A0 1.45 0.1 F 3.50 0.05 B0 2.25 0.1 D1 1.10 0.1 K0 1.30 0.05 K0 P0 D t P2 E F W B0 P D1 Polarity A0 14 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) 4. Reel dimensions Unit: mm 180 +0 -4 11.4 1 9 +1/-0 13 0.5 60 21 0.8 2 0.5 5. Leader and trailer section of tape 40 mm or more 40 mm or more (Note 1) (Note 2) Leading part 190 mm (min) Note 1: Empty trailer section Note 2: Empty leader section 15 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) 6. Packing display (1) Packing quantity Reel 3,000 pcs Carton 15,000 pcs (2) Package form: Each reel is sealed in an aluminum pack with silica gel. 7. Label format (1) Example: TLRU1002A (T02) P/N: TOSHIBA TYPE TLRU1002A ADDC (T02) Q'TY Lot Number Key code for TSB (RANK SYMBOL) 32C 3,000 pcs 3000 Use under 5-30degC/70%RH within 72h SEALED DIFFUSED IN ***** ASSEMBLED IN ***** [[G]]/RoHS COMPATIBLE *Y380xxxxxxxxxxxxxxxxxx* (2) Label location * Reel * Carton Tape reel direction Label position Label position * The aluminum package in which the reel is supplied also has a copy of the label attached to center of one side. 16 2008-05-22 TL(RU,SU,OU,AU,YU,GU,PGU)1002A(T02) RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 17 2008-05-22