SSF67V Series Continuous output level transducer 4-20mA transducer for safe area use (optional flameproof certification) Maximum process temperature 100C Standard 10mm stepped accuracy Standard G1" Screwed entry (G1" to G2.5" possible) Technical Specification Mounting style Mounting thread Stem material Float material Enclosure material External Connection terminal block G1" (up to G2.5" possible) Maximum Process Temperature 100C Brass (optionally st/st) Maximum Ambient Temperature 70C D300 closed cell PVC (opt. st/st) Minimum ambient Temperature -18C Aluminium (opt. st/st) Electrical Specification Output 4 to 20mA 4mA can be either High or Low Input supply 15 to 30Vdc Can be connected to analogue or digital displays Standard Parts Upper Level Measuring Span Total Length SSF67V70S500 SSF67V70S1000 SSF67V70S1500 70mm 70mm 70mm 640mm 1140mm 1640mm 500mm 1000mm 1500mm This transducer will give an output of 4-20mA over a measuring span of up to 2500mm. The standard output changes from 4mA at low level to 20mA at high level. The transducer is top mounting, via a screwed entry, and is normally installed from outside the tank. The device has either a brass or stainless steel stem with either a foamed float or a stainless steel float Volt free switches and resistors are mounted in the stem, to provide a varying resistance, as the float rises or falls, which is converted within the device into a 4 to 20mA stepped output. Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements. Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales@cynergy3.com ISO9001 CERTIFIED www.cynergy3.com SSF67V 2016 (c) 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.