DP-100 - OK INDUSTRIES - Datasheet.Live

OK Industries. Connecting Technologies.

Precision Tools, Devices & Instruments

For Telecom, Computer and Electronic Industries

Catalog #104

INDEX

PAGE 4

WIRE WRAPPING

OVERVIEW

PAGE 5-6

PTX SERIES

WRAP/UNWRAP TOOLS

PAGE 7

DFB DUAL FUNCTION

WRAP/UNWRAP BIT &

SLEEVE SETS

PAGE 8-9

MANUAL WIRE WRAP/

UNWRAP TOOLS

PAGES 10-12

BIT & SLEEVE CHART

SPECIALIZED BITS & SLEEVES

PAGE 13-15

HAND WRAPPING &

UNWRAPPING TOOLS

SOCKET WRAP ID TAGS

PAGE 16

COPPER WIRE CUT &

STRIP TOOLS

PAGE 17

WIRE

PAGE 18-19

PUNCHDOWN TOOLS

PAGE 20

DESOLDER PUMPS

PAGE 21

FUME ABSORBERS

PAGE 22

INSERTION

EXTRACTION TOOLS

DESIGN TECHNOLOGY PRECISION QUALITY

134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

ENHANCING

NETWORK

RELIABILITY

WITH OK INDUSTRIES

Founded in 1946, OK Industries is a major force in

the telecommunications and electronics

industries and is a division of Jonard Industries

Corp. We are a global manufacturer of hand tools

for the interconnection of communications

networks. Our dependable products employ

precision technologies for the preparation and

connection of copper cables in applications

including public and enterprise voice and data

communications. Ask for OK Industries when you

wish to build reliability into your networks.

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

By bending the wire around the sharp corner

of the terminal, the oxide layer on both wire

and terminal is crushed or sheared, and a clean,

oxide-free metal-to-metal contact is obtained.

A “Regular” bit wraps the bare wire around the terminal.

A “Modified” bit wraps a portion of insulation around

the terminal in addition to the bare wire.This

greatly increases the ability to withstand vibration.

Regular Modified

In. .010 .015 .020 .025 .030 .035 .040 .045 .050 .055 .060 .065 .070 .075 .080 .085 .090 .095 .100

mm 0.25 0.38 0.51 0.64 0.76 0.89 1.02 1.14 1.27 1.40 1.52 1.65 1.78 1.91 2.03 2.16 2.29 2.41 2.54

.010 .014 .018 .022 .027 .032 .036 .041 .046 .051 .056 .061 .066 .071 .076 .081 .086 .091 .096 .101

0.25 0.36 0.46 0.56 0.69 0.81 0.91 1.04 1.17 1.30 1.42 1.55 1.68 1.80 1.93 2.06 2.18 2.31 2.44 2.57

.015 .018 .021 .025 .029 .033 .038 .043 .047 .052 .057 .062 .067 .072 .077 .082 .087 .092 .097 .102

0.38 0.46 0.53 0.64 0.74 0.84 0.97 1.09 1.19 1.32 1.45 1.58 1.70 1.83 1.96 2.08 2.21 2.34 2.46 2.59

.020 .022 .025 .028 .032 .036 .040 .045 .049 .053 .058 .063 .068 .073 .078 .083 .088 .093 .098 .103

0.51 0.56 0.64 0.71 0.81 0.91 1.02 1.14 1.25 1.35 1.47 1.60 1.73 1.85 1.98 2.11 2.24 2.36 2.49 2.62

.025 .027 .029 .032 .035 .039 .043 .047 .050 .056 .060 .065 .069 .074 .079 .084 .089 .094 .099 .104

0.64 0.69 0.74 0.81 0.89 0.99 1.09 1.19 1.27 1.42 1.52 1.65 1.75 1.88 2.01 2.13 2.26 2.39 2.52 2.64

.030 .032 .033 .036 .039 .042 .046 .050 .054 .058 .062 .067 .071 .076 .080 .085 .090 .095 .100 .105

0.76 0.81 0.84 0.91 0.99 1.07 1.17 1.27 1.37 1.47 1.58 1.70 1.80 1.93 2.03 2.16 2.29 2.41 2.54 2.67

.035 .036 .038 .040 .043 .046 .049 .052 .056 .060 .064 .069 .073 .078 .082 .087 .091 .096 .101 .106

0.89 0.91 0.97 1.02 1.09 1.17 1.25 1.32 1.42 1.52 1.63 1.75 1.85 1.98 2.08 2.21 2.31 2.44 2.57 2.69

.040 .041 .043 .045 .047 .050 .052 .056 .060 .064 .068 .072 .076 .080 .084 .089 .092 .097 .102 .107

1.02 1.04 1.09 1.14 1.19 1.27 1.32 1.42 1.52 1.63 1.73 1.83 1.93 2.03 2.13 2.26 2.34 2.46 2.59 2.72

.045 .046 .047 .049 .050 .054 .056 .060 .063 .067 .071 .074 .078 .083 .087 .091 .096 .101 .105 .109

1.14 1.17 1.19 1.25 1.27 1.37 1.42 1.52 1.60 1.70 1.80 1.88 1.98 2.11 2.21 2.31 2.44 2.57 2.67 2.77

.050 .051 .052 .053 .056 .058 .060 .064 .067 .071 .074 .078 .082 .086 .090 .094 .098 .103 .107 .111

1.27 1.30 1.32 1.35 1.42 1.47 1.52 1.63 1.70 1.80 1.88 1.98 2.08 2.18 2.29 2.39 2.49 2.62 2.72 2.82

Example: If “A”=.020”. “B”=.060”. The terminal diagonal is .063" as shown on chart.

Step 1: Bit, Sleeve and

Pre-Stripped Wire

Step 2: Wire Insertion

Step 3: Wire Anchoring

Step 4: Terminal

Insertion

Step 5: Finished

Connection

METAL-TO-METAL CONTACT

TYPES OF WRAP

TERMINAL DIAGONAL CHART

HOW TO MAKE WIRE

WRAPPED CONNECTIONS

Wire Size Min. number Min. strip

AWG Dia. Dia. of turns force

inches mm (Bare Wire) lbs. gms

16 .051 1.30 4 15 6800

18 .0403 1.00 4 15 6800

20 .032 0.80 5 8 3600

22 .0253 0.65 5 8 3600

24 .0201 0.50 6 7 3200

26 .0159 0.40 7 6 2700

28 .0126 0.32 7 5 2200

30 .0100 0.25 7 3.3 1500

*Conforms to MIL-STD-1130B

STRIP FORCE CHART*

SOME HINTS ON MAKING WRAPPED CONNECTIONS

OPEN WRAP & SPIRAL WRAP

Just keep the OK tool on the

terminal until the wrap is

complete. Early removal can

result in spiral and open wraps.

PIGTAIL

Wire wrapping is a precision technique

and the wrong bit and sleeve just

cannot do the job. Improper selection

can cause problems ranging from

“Pigtails” to loose wraps.

Wire Wrapping is a method of making a wire connection by coiling the bare wire around the sharp corners of a

terminal under mechanical tension. The technology was developed as an alternative to soldering, which presents

various safety and reliability problems in many applications. A principal advantage of wire wrapping is that it

provides a high-reliability connection that is also easily removed to correct or modify a wiring layout. Wire wrapping

subjects the wire to tremendous tension and compression forces, causing the oxide layer on both wire and terminal

to be crushed or sheared, resulting in a clean, oxide-free metal-to-metal contact. A standard wrap is generally used

for 24 AWG and larger diameter wires; a modified wrap is typically used for 24 AWG and smaller wires, and is used

almost exclusively for 28 to 30 AWG wires. In either case, the wrap style affects only the connection’s mechanical

stability; both styles provide suitable electrical connections.

WIRE WRAPPING OVERVIEW

INSUFFICIENT TURNS

It’s easy to feed wire into the slot in the

OK bit correctly. Be sure the stripped end

of the wire is “pushed-in” all the way.

OVERWRAP

Do not press too hard. Let the OK tools

do the work. Excessive pressure can lead

to overwrapping. Backforce "BF" to

prevent overwrapping is available on

most power tools and is recommended

for use with 26 through 30 AWG wire.

DIMENSION A

DIMENSION B

4134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

PTX SERIES

WIRE WRAPPING &UNWRAPPING TOOLS

FSK-1

FSK-2

Catalog Number

Fiber Coating or Buffer

Dia. to Strip (µm)

Replacement Fiber

Guide Cat. No ††

FS-G-RG1

FS-G-RG2

FS-G-RG3

FS-G-RG4

FS-G-RG5

FS-G-RG6

FS-G-RG7

FS-G-RG8

FS-G-RG10

FS-G-RG15

COATING OR BUFFER

Part No. Description Weight Voltage RPM

PTX Battery Wrap/Unwrap Tool (Battery not included) 1.2 lb. 3.6V* 3700

PTX-1 Electric Wrap/Unwrap Tool - 115V 0.86 lb. 115V 3700

PTX-1BF Electric Wrap/Unwrap Tool w/Backforce - 115V 0.86 lb. 115V 3700

PTX-2 Electric Wrap/Unwrap Tool - 230V 1.0 lb. 230V 4200

PTX-2BF Electric Wrap/Unwrap Tool w/Backforce - 230V 1.0 lb. 230V 4200

PTX-KIT1 115V battery tool kit (tool, charger, (2) batteries) 1.2 lb. 3.6V* 3700

PTX-KIT1DH PTX-KIT1 w/DFB224 and H-1000 1.2 lb. 3.6V* 3700

PTX-KIT2 230V battery tool kit (tool, charger, (2) batteries) 1.2 lb. 3.6V* 4200

* Powered by long-life NiMH battery

The PTX Series Wire Wrapping Tools from OK Industries

bring revolutionary new benefits to installers, telecom

technicians and other users. With worker safety in

mind, we consulted a certified ergonomist and

created an ergonomic tool, which includes a

lightweight, well-balanced construction, dual-finger

short-throw trigger, and a long handle to mitigate

pressure on the palm. These features help to prevent

repetitive stresses and result in an industry-leading design

from a comfort and safety standpoint. Ask for the PTX Series

Wire Wrapping Tools from OK Industries — and arm your

workers with the tools that offer efficiency and worker

safety in your interconnect activity.

PTX-B

KEY FEATURES

ACCESSORIES

ORDERING INFORMATION AND PRODUCT SPECIFICATIONS

PTX-B PTX Battery, 3.6V

PTX-BC1 115V Battery Charger

PTX-BC2 230V Battery Charger

H-1000 Cordura Tool Pouch

Low Battery Indicator

High Power Motor

Reverses for

Unwrapping

Permanently

Attached

Collet Nut

Ergonomic,

Rugged

Tool Design

Ergonomic Design — Minimizes Repetitive Stress

Rugged Construction for Field Usage

Battery and Electric Powered Versions Available

Wraps and Unwraps 20 to 30 AWG Wire

 Rated Maximum Usage: 2,500 cycles/day

For Bits & Sleeves: see Pages 7, 10-12

PTX-BC1 H-1000

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com 5

PTX-KIT1DH

BATTERY WIRE WRAPPING &UNWRAPPING KIT

Ergonomic Design–

Minimizes Repetitive Stress

Rugged Construction for

Field use

Wraps and Unwraps

18 to 30 AWG Wire

Dual Finger Short-throw

Trigger

Rated for 2,500 Cycles/Day

BATTERY POWERED BY

LONG-LIFE NIMH BATTERY

Part No.: PTX-Kit1DH

Kit Contains: PTX Battery wrap/unwrap tool

PTX-BC1 Charger

PTX-B 2 Batteries

DFB224 (dual function wrapping/unwrapping

bit/sleeve set, 22-24 AWG)

H-1000 Cordura Tool Pouch

Weight: 1.2 lbs.

Voltage: 3.6V (NiMH Battery)

RPM: 3,700

For a complete listing of bits and sleeves- see pages 7, 10-12

PRODUCT SPECIFICATIONS

PTX-B

PTX-BC1

H-1000

6134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

ERGONOMIC

KEY FEATURES

DFB 224

Min. Terminal Max. Terminal Terminal Terminal Hole Effective

Part # Description Wire Size Diagonal Diagonal Hole Depth Diameter Radius

AWG MM IN. MM IN. MM IN. MM IN. MM IN. MM

DFB224 Wrap/Unwrap Bit/Sleeve Set 22-24 AWG 22/24 .50/.65 .054 1.37 .073 1.85 0.50 25.40 .075 1.90 .111 2.82

KB-DF224 Replacement bit for DFB224

P-DF224 Replacement Sleeve for DFB224

DFB2426 Wrap/Unwrap Bit/Sleeve Set 22-24 AWG 24/26 .40/.50 .054 1.37 .065 1.65 0.50 25.40 .066 1.67 .098 2.48

KB-DF2426 Replacement bit for DFB2426

P-DF2426 Replacement Sleeve for DFB2426

The Wrap/Unwrap bit is shipped with the sleeve set in the wrap position. To change to the unwrap function simply

pull the sleeve out approximately 1/4” (the sleeve is spring loaded and you should feel some tension while pulling

forward), rotate the sleeve in either direction 1800 and release. The sleeve should now be seated approximately 1/4”

lower than in the wrap position. This will expose the unwrap feature on the bit.

To change back to the wrap position pull the sleeve out approximately 1/2” and rotate the sleeve in either direction

1800 and release. The spout should be in the 12:00 position and the sleeve should be locked in position.

Note: If you cannot rotate the sleeve, you need to pull the sleeve out further before trying to rotate the sleeve.

OK INDUSTRIES INTRODUCES

THE DFB224 & DFB2426 DUAL FUNCTION BIT/SLEEVE SETS

HOW TO USE THE DFB224 & DFB2426

DUAL FUNCTION

WRAP/UNWRAP BIT

&SLEEVE SETS

This innovative product represents a truly revolutionary approach to wire wrapping, by combining both the wrap and the

unwrap functions into one bit/sleeve set. The bit is precision machined for high quality wrapping in the clockwise direction,

but also includes the removal mechanism that is used to unwrap when operated counterclockwise. The user can quickly and

easily switch back and forth between wrap and unwrap mode by retracting or extending the retractable sleeve, and flipping

the switch on a wrap/unwrap power tool (i.e., a power wire wrapping tool with reversible motor). This product, which can

wrap or unwrap 22–26 AWG wire (depending on set), enables the user to maximize operating efficiency while eliminating

the need to purchase and carry extra tools or bits for unwrapping. Also, to prevent pin-to-pin shorting, the retractable

sleeve is coated with a durable 1000V dielectric material.

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

The combination of the G100/R3394CT unwrap tool and the

PUW unwrap bit & sleeve set gives you the best tool for high

speed wire unwrapping. High production, long life, low

maintenance. Use Unwrap Set PUW2226 for wire AWG 20 thru

26 (0.80 thru 0.40mm).

Unwrap Bit Unwrap Sleeve Bit and Sleeve Set Wire Size Terminal Hole Diameter

Part No. Part No. Set No. AWG mm Inches mm

2026-UB SOK2230 PUW2226 20-26 0.80-0.40 .070 1.77

G100/R3394CT

G100/R3278 Aluminum

MANUAL WIRE

WRAPPING &UNWRAPPING TOOLS

G200/R3278 : Lexan™

G100/R3278 : Aluminum

G100/R3278INS : Aluminum (insulated)

For Bits & Sleeves : see pages 7, 10-12



G100/R3394CT :

Manual Wire Unwrapping Tool

(See bit & sleeve listed below)

MANUAL WIRE UNWRAPPING TOOL

MANUAL WIRE WRAPPING TOOLS

G200/R3278 Lexan™

G100/R3278INS Insulated

For precise reliable wraps, choose the tool you want.

We offer durability with our rugged aluminum tool,

G100/R3278, added protection with our insulated

version, G100/R3278INS, providing 1000V of dielectric

strength across most of the housing, and the same

reliability, light weight plus a lower cost with our

Lexan®model, G200/R3278. These tools accommodate

wire sizes from 22 AWG (0.65mm) thru 32 AWG

(0.20mm).

8134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

MANUAL WIRE

WRAPPING TOOL KITS

These are complete kits for technicians working at a Main Distributing Frame or for field service where wire

wrapping is required. The WWK-1 Wire Wrap kit is our standard version for all 22-24 AWG applications. Our

WWK-11NS Insulated Wire Wrap Kit provides the same AWG applications, plus the added safety of 1000V

dielectric protection across most of the housing of the G100/R3278INS Insulated Wire Wrap Gun. Other

components (P2224INS sleeve and UW4) also possess insulated properties. Both kits include our popular

H-1000 cordura pouch for carrying convenience.

WWK-1

TELECOM WIRE WRAP KITS

Part No.: WWK-1: Wire Wrap Kit

Kit Contains: G200/R3278 Speed Wrap Tool

KB224 coiltite bit 22-24 AWG

P2224 coiltite sleeve 22-24 AWG

HW-UW-224 Wrap/unwrap tool

ST-100 wire stripper 22-24 AWG

H-1000 Cordura Pouch

Part No.: WWK-1INS: Insulated Wire Wrap Kit

Kit Contains: G100/R3278INS Insulated Speed Wrap tool

KB224 coiltite bit 22-24 AWG

P2224INS Insulated coiltite sleeve 22-24 AWG

UW4 sleeved unwrapping tool 20-26 AWG

ST-100 Wire stripper 22-24 AWG

H-1000 Cordura Pouch

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

ST-100 HW-UW-224 G200/R3278

P2224 KB224

UW4 ST-100 KB224 P2224INS

WWK-1INS

G100/R3278INS

BITS & SLEEVES

3” BITS AND SLEEVES CHART (AWG) INCHES

BITS & SLEEVES WIRE WRAPPING

Fully compatible with any make or model wire wrapping tool.

Maximum Minimum Maximum Terminal Terminal

Wire Bit Sleeve Insulation Terminal Terminal Hole Effective Hole

Gauge Regular Modified Part No. Part No. Diameter Diagonal Diagonal Depth Radius Diameter

(AWG) Inches Inches Inches Inches Inches Inches



WB20M P194LN .059 .042 .073 1.000 .150 .075

20-22



KB2075 P2224 – .042 .073 1.000 .123 .075



KB22 P2224 – .054 .073 .750 .117 .075



WB2275M P2224 .052 .049 .074 1.000 .132 .075

22-24



KB224LH P2224 – .061 .085 1.000 .117 .086

22-24



KB224-1 P2224 – .054 .073 1.000 .111 .075

22-24



KB224 P2224 – .054 .073 .807 .111 .075

22-24



WB224M P2224 .050 .049 .074 1.250 .121 .075



WB24DH P2224 .046 .054 .073 1.750 .117 .075



KB24 P2426 – .055 .074 .750 .100 .075



*WB24SM P3032LN .044 .024 .043 .750 .098 .044

24-26



WB2426M P2224 .046 .054 .073 .750 .118 .075



KB26 P2426 – .058 .073 1.000 .100 .075



*WB26SM P26LN .031 .023 .038 .750 .075 .040



WB26M P2224 .046 .054 .073 1.000 .118 .075



*WB2644M P3032LN .046 .024 .043 .750 .098 .044



WB2669M P2426 .041 .053 .068 1.000 .109 .069



WB2870M P2426 .034 .053 .068 1.000 .103 .070

WB28SHM P3032 .030 .031 .035 .750 .066 .036



*SB30MSH-B P3032 .027 .031 .035 .750 .064 .036



*SB30MMK P3032 .023 .031 .035 .750 .064 .036

30-32



*WB3032M P3032 .027 .034 .038 .750 .064 .040

30-32



KB3032 P3032 - .034 .038 .750 .064 .040

10 134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

*These tools are recommended for .025" square terminals on .100” centers

3” BITS AND SLEEVES CHART METRIC

WIRE WRAPPING BITS & SLEEVES

Fully compatible with any make or model wire wrapping tool.

BITS & SLEEVES

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

*These tools are recommended for .025" square terminals on .100” centers

Maximum Minimum Maximum Terminal Terminal

Wire Bit Sleeve Insulation Terminal Terminal Hole Effective Hole

Gauge Regular Modified Part No. Part No. Diameter Diagonal Diagonal Depth Radius Diameter

mm mm mm mm mm mm mm

0.80



WB20M P194LN 1.50 1.07 1.85 25.40 3.81 1.90

0.65-0.80



KB2075 P2224 – 1.07 1.85 25.40 3.12 1.90

0.65



KB22 P2224 – 1.37 1.85 19.05 2.97 1.90

0.65



WB2275M P2224 1.32 1.24 1.87 25.40 3.35 1.90

0.50-0.65



KB224LH P2224 – 1.54 2.15 25.40 2.97 2.18

0.50-0.65



KB224-1 P2224 – 1.37 1.85 25.40 2.82 1.90

0.50-0.65



KB224 P2224 – 1.37 1.85 20.50 2.82 1.90

0.50-0.65



WB224M P2224 1.27 1.24 1.87 31.75 3.07 1.90

0.50



WB24DH P2224 1.17 1.37 1.85 44.50 2.97 1.90

0.50



KB24 P2426 – 1.39 1.87 19.05 2.54 1.90

0.50



*WB24SM P3032LN 1.11 0.60 1.09 19.05 2.48 1.11

0.40-0.50



WB2426M P2224 1.17 1.37 1.85 19.05 2.99 1.90

0.40



KB26 P2426 – 1.47 1.85 25.40 2.54 1.90

0.40



*WB26SM P26LN 0.79 0.58 0.96 19.05 1.90 1.02

0.40



WB26M P2224 1.17 1.37 1.85 25.40 2.99 1.90

0.40



*WB2644M P3032LN 1.17 0.60 1.09 19.05 2.48 1.11

0.40



WB2669M P2426 1.04 1.34 1.72 25.40 2.77 1.75

0.32



WB2870M P2426 0.86 1.35 1.72 25.40 2.61 1.78

0.32



*WB28SHM P3032 0.76 0.79 0.89 19.05 1.67 0.91

0.25



*SB30MSH-B P3032 0.69 0.79 0.89 19.05 1.62 0.91

0.25



*SB30MMK P3032 0.58 0.79 0.89 19.05 1.62 0.91

0.20-0.25



*WB3032M P3032 0.69 0.86 0.96 19.05 1.62 1.02

0.20-0.25



KB3032 P3032 - 0.86 0.96 19.05 1.62 1.02

The insulated sleeves are covered with a material that

provides 1000V dielectric strength which helps to prevent

shorting between pins and enhances worker safety.

SPECIALIZED BITS & SLEEVES

Bits and Insulated Sleeves

2” (5cm) Longer than Standard Bits & Sleeves

Maximum Minimum Maximum Terminal Terminal

Bit Sleeve Wire Size Regular Modified Insulation Terminal Terminal Hole Effective Hole

Part No. Part No. Diameter Diagonal Diagonal Depth Radius Diameter

AWG mm In. mm In. mm In. mm In. mm In. mm In. mm

KB22 P2224INS 22 0.65



– – .054 1.37 .073 1.85 .750 19.05 .117 2.97 .075 1.90

KB224 P2224INS 22-24 0.50-0.65



– – .054 1.37 .073 1.85 .807 20.50 .111 2.82 .075 1.90

KB24 P2426INS 26 0.50



– – .055 1.39 .074 1.87 .750 19.05 .100 2.54 .075 1.90

KB26 P2426INS 26 0.40



– – .058 1.47 .073 1.85 1.0 25.40 .100 2.54 .075 1.90

KB3032 P3032INS 30-32 0.32



– – 0.034 0.86 0.038 0.96 0.75 19.05 0.064 1.62 0.04 1.02

Insulated Uninsulated Maximum Minimum Maximum Terminal Terminal

Bit Sleeve Sleeve Wire Size Regular Insulation Terminal Terminal Hole Effective Hole

Part No. Part No. Part No. Diameter Diagonal Diagonal Depth Radius Diameter

AWG mm In. mm In. mm In. mm In. mm In. mm In. mm

KB22-5 P2224-5INS P2224-5 22 0.65



– – .054 1.37 .073 1.85 .750 19.05 .117 2.97 .075 1.90

KB24-5 P2426-5INS P2426-5 24 0.50



– – .055 1.39 .073 1.85 .750 19.05 .100 2.54 .075 1.90

KB26-5 P2426-5INS P2426-5 26 0.40



– – .058 1.47 .073 1.85 .750 19.05 .100 2.54 .075 1.90

These bits and sleeves are designed for wire wrapping in

areas requiring deep penetration. Their 5" (127mm)

length ensures “true” connections in hard-to-get-at

locations. Available with or without insulation.

Enjoy the convenience of pre-assembled sets with

insulated color-coded sleeves for easy identification of

wire sizes based on color.

P2426-5INS

KB24-5

Extended Length (5”) Bits Plus Insulated and Noninsulated Sleeves

3” Bit & Sleeve Sets With Insulated Color Coded Sleeves

Sleeve Maximum Minimum Maximum Terminal Terminal

Bit Part No. Wire Size Regular Modified Insulation Terminal Terminal Hole Effective Hole

Part No. Color Diameter Diagonal Diagonal Depth Radius Diameter

AWG mm In. mm In. mm In. mm In. mm In. mm In. mm

KB22

P2224-B-INS

22 0.65



– – .054 1.37 .073 1.85 .750 19.05 .117 2.97 .075 1.90

Blue

KB224

P2224-B-INS

22-24

0.50-0.65



– – .054 1.37 .073 1.85 .807 20.05 .111 2.82 .075 1.90

Blue

KB24

P2426-Y-INS

24 0.50



– – .055 1.39 .074 1.87 .750 19.05 .100 2.54 .075 1.90

Yellow

KB26

P2426-G-INS

26 0.40



– – .058 1.47 .073 1.85 1.000 25.40 .100 2.54 .075 1.90

Green

WB26SM

P26LN-R-INS

26 0.40



.031 0.79 .023 0.58 .038 0.96 .750 19.05 .750 1.90 .040 1.02

Red

Kit

Number

KT22B

KT224B

KT24Y

KT26G

KT26R

12 134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

KB22

P2224INS

Wire Size Max. Insulation Terminal Hole Terminal Hole Outside

Part No. Reg. Mod. Type Diameter Diameter Depth Diameter

AWG mm Inches mm Inches mm Inches mm Inches mm

HW-20



A 20 0.80 – – .075 1.90 1.000 25.40 .218 5.53

HW-224



A 22-24 0.65-0.50 – – .075 1.90 .807 20.50 .218 5.53

HW-224LH



A 22-24 0.65-0.50 – – .086 2.18 1.000 25.40 .218 5.53

HW-26



A 26 0.40 – – .075 1.90 1.000 25.40 .218 5.53

*HW-30



30 0.25 .027 0.69 .036 0.91 .750 19.05 .125 3.17

*These tools are recommended for .025" (0.63mm) square terminals on .100" (2.54mm) centers

These tools are used to remove wire connections

using 18 thru 32 gauge wire.

Type of Terminal Terminal Outside

Part No. Type Wire Size Unwrap Hole Diameter Hole Depth Diameter

AWG mm Inches mm Inches mm Inches mm

UW1 D 20-26 0.80-0.40 Left Hand .070 1.77 1.000 25.40 .156 3.96

UW2 C 20-26 0.80-0.40 Left and Right Hand .070 1.77 1.000 25.40 .156 3.96

UW4 B 20-26 0.80-0.40 Left Hand .070 1.77 2.360 60.00 .187 4.74

UW5 B 20-26 0.80-0.40 Left and Right Hand .070 1.77 2.360 60.00 .187 4.74

UW093R D 24-32 0.50-0.20 Left Hand .038 0.96 1.000 25.40 .093 2.36

UWD93-93 C 24-32 0.50-0.20 Left and Right Hand .038 0.96 1.000 25.40 .093 2.36

UW2832C B 28-32 0.32-0.20 Left and Right Hand .038 0.96 .750 19.05 .156 3.96

Type “C”

HAND UNWRAPPING TOOLS

HAND WRAPPING AND UNWRAPPING

TOOLS

HAND WRAPPING TOOLS

These Hand Wrapping Tools are carefully designed to

produce perfect wire wrapped connections.

Precision, long-lasting tools for use where occasional

wraps are required or where power wire-wrapping

tools are not practical. Compact and convenient.

Type “B”

Type “A”

HW-30

Type “D”

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

Type “C”

Max. Terminal Terminal

Part Wire Size Insulation Hole Hole Outside Wire Size

Number Reg Mod Diameter Diameter Depth Diameter

AWG mm In. mm In. mm In. mm In. mm AWG mm

HW-UW-18-19



18-19 1.00 – – .075 1.90 1.000 25.40 .250 6.35 18-19 1.00

0.91 0.91

HW-UW-20



20 – – .075 1.90 1.000 25.40 .218 5.53 20-26 0.80

0.80 0.40

HW-UW-224



22-24 0.50 – – .075 1.90 .807 20.50 .218 5.53 20-26 0.80

0.65 0.40

HW-UW-224-1



22-24 0.50 – – .075 1.90 1.000 25.40 .218 5.53 20-26 0.80

0.65 0.40

HW-UW-224LH



22-24 0.50 – – .086 2.18 1.000 25.40 .218 5.53 20-26 0.80

0.65 0.40

HW-UW-2426



24-26 0.40 – – .075 1.90 .750 19.05 .218 5.53 20-26 0.80

0.50 0.40

HW-UW-26



26 0.40 – – .075 1.90 1.000 25.40 .218 5.53 20-26 0.80

0.40

*HW-UW-26SM



26 0.40 .031 0.79 .040 1.02 .750 19.05 .125 3.17 24-32 0.50

0.20

HW-UW-2829M



28-29 0.29 .036 0.91 .040 1.02 .750 19.05 .156 3.96 24-32 0.50

0.32 0.20

HW-UW-30



30 .027 0.69 .036 0.91 .750 19.05 .125 3.17 24-32 0.50

0.25 0.20

*These tools are recommended for .025" (0.63mm) square terminals on .100" (2.54mm) centers.

Terminal Terminal

Hole Hole Outside

Diameter Depth Diameter

In. mm In. mm In. mm

.075 1.90 1.000 25.40 .187 4.74

.070 1.77 1.000 25.40 .156 3.96

.086 2.18 .750 19.05 .156 3.96

.070 1.77 1.000 25.40 .156 3.96

.038 0.96 1.000 25.40 .093 2.36

To switch from wire wrapping to unwrapping takes

only seconds - just a quick change of the cap from

one end to the other.

HAND WRAPPING AND UNWRAPPING TOOLS

HAND WRAPPING AND UNWRAPPING

TOOLS

HAND WRAPPING TOOLS

These Hand Wrapping Tools are carefully designed to

produce perfect wire wrapped connections.

Precision, long-lasting tools for use where occasional

wraps are required or where power wire-wrapping

tools are not practical. Compact and convenient.

14 134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

WRAPPING SIDE UNWRAPPING SIDE

Wrap/Strip/Unwrap Tools

Part No. Pins Row Spacing Qty./Pkg.

ID-8-100 8 .3" (7.5mm) 100

ID-14-100 14 .3" (7.5mm) 100

ID-16-100 16 .3" (7.5mm) 100

ID-18-50 18 .3" (7.5mm) 50

ID-20-50 20 .3" (7.5mm) 50

ID-22-50 22 .4" (10mm) 50

ID-24-50 24 .6" (15mm) 50

ID-28-50 28 .6" (15mm) 50

ID-40-25 40 .6" (15mm) 25

ID-96-25 96 .3" (7.5mm) 25

SOCKET-WRAP I.D.™

Increase Wiring Speed and Reduce Errors.

Used to identify pin numbers on wire wrapping sockets.

Consisting of a socket-sized plastic panel with numbered

holes in the pin location, the Socket Wrap-ID is simply

slipped onto the socket before wrapping. You can also

write on them for easy identification of location, IC Part

number, function, etc. These unique items greatly

simplify both initial wire wrapping and subsequent

troubleshooting or repair. A great help to technicians,

and production facilities alike.

Terminal Hole Terminal Outside Square

Part No. Wire Size Diameter Hole Depth Diameter Post

AWG mm In. mm In. mm In. mm In. mm

WSU-2224 22-24 0.65-0.50 .075 1.90 1.50 38.1 .213 5.4 .045 1.14

WSU-24M 24 0.50 .075 1.90 1.50 38.1 .213 5.4 .045 1.14

WSU-26M 26 0.40 .075 1.90 1.50 38.1 .213 5.4 .045 0.63

WSU-30 30 0.25 .036 0.91 1.50 38.1 .125 3.2 .025 0.63

WSU-30M 30 0.25 .036 0.91 1.50 38.1 .125 3.2 .025 0.63

Each WSU tool wraps, unwraps and even strips the

appropriate wire diameter with a unique built-in

stripper blade. Ideal for bench use or tool kit in all

service and repair applications. In addition to

versatility, convenience, and reliability, the WSU

Series offers exceptional value.

WSU-26M

(Modified Wrap)

WSU-24M

(Modified Wrap)

WSU-30

(Regular Wrap)

WSU-30M

(Modified Wrap)

WSU-2224

(Regular Wrap)

WRAP / STRIP / UNWRAP

TOOLS

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

A revolutionary concept for easy and clean stripping of wires for wire wrapping, electronic and appliance

applications. Biomechanically designed for maximum efficiency.

Easy to operate... place wire (up to 4) in stripping slot with ends extending beyond cutter blades... press tool and

pull... wire is cut and stripped to proper “wire wrapping” length. The hardened steel cutting blades and sturdy

construction of the tool ensure long life. Strip length easily adjustable for your application. Blades are made from

specially tempered spring steel for clean, nick-free wire stripping.

Part No. Wire Size Adjustable Strip-Off Length Replacement

AWG mm Inches mm Blade

ST-100 22-24 0.65-0.50 1 5/16” to 1 9/16” 33.33 to 39.68 OK-3907B

ST-100-26 26 0.40

1 15/16” to 1 11/16”

33.33 to 42.86 OK-3907-26B

ST-100-28 28 .32 7/8” to 1 1/8” 22.22 to 28.57 OK-3907-28B

ST-100-30 30 .25 7/8” to 1 1/8” 22.22 to 28.57 OK-3907-30B

ST-100-30

The OK-3907 Series from OK Industries is the industry’s leading cut-

and-strip tool for copper interconnect applications. Installers and

telecom technicians enjoy its rugged construction, comfortable

rubber grips, and high-leverage handle design, which allows time

savings through the simultaneous cutting of multiple wires. Blades

are made from specially tempered spring steel for clean, nick-free

wire stripping.

COPPER WIRE CUT

& STRIP TOOLS

WIRE CUT-AND-STRIP TOOLS - ST-100 SERIES

ADJUSTABLE PRECISION WIRE STRIPPERS OK-3907 SERIES

Part No. Wire Size Adjustable Strip-Off Length Replacement

AWG mm Inches mm Blade

OK-3907 22-24 0.65 1-1⁄2" to 1-3⁄4" 38.10 to 44.45 OK-3907B

OK-3907-26 26 0.40 1-1⁄2" to 1-3⁄4" 38.10 to 44.45 OK-3907-26B

OK-3907-30 30 0.25 7/8” to 1 1/8” 22.22 to 28.57 OK-3907-30B

The ST-500 and ST-550 Adjustable Precision Wire Strippers feature an

adjustment dial that allows the operator to select one of six different

settings. A calibrated wire stop can then be adjusted for the desired

insulation strip length. In a single motion, the operator squeezes and

pulls the tool. This action engages four specially hardened blades to

cleanly cut the wire insulation while the pulling motion breaks the

insulation / conductor bond.

ADJUSTABLE PRECISION WIRE STRIPPERS ST-500 & ST-550

Part No. ST-500 ST-550

Wire Gauge 20-30 AWG 18-28 AWG

Calibrated Strip Length Adjustable to 2” (50.8mm) Adjustable to 2” (50.8mm)

Insulation Type Any Any

Dimensions 3.9” x 1.6” x 0.6” 3.9” x 1.6” x 0.6”

(L x H x Thickness) (99mm x 42mm x 14mm) (99mm x 42mm x 14mm)

Housing Material ABS ABS

Blade Hardened Steel (RC 58) Hardened Steel (RC 58)

OK-3907

ST-500 & ST-550

Adjustable to six wire gauges:

ST-500 20 to 30 AWG

ST-550 18 to 28 AWG

Calibrated Wire Stop

Single action squeeze-pull motion

Clean, precise strip of any insulation type

Shirt-pocket size and light-weight (<1oz.)

16 134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

Wire Dispenser - WD-30 Series



With 50ft. (15.2m) Roll of

30 AWG (0.25mm) Kynar™

wire-wrapping wire



Built-in Plunger cuts

wire to desired length



Built-in Stripper strips

1" (25.4mm)

of insulation



Refillable

Replacement Rolls of Wire

For WD-30 Series

Wire for wire-wrapping.

30 AWG (0.25mm) Kynar™ wire,

50ft. (15.2m) roll, silver plated,

solid conductor easy stripping.

Part No. Description

WD-30-B Dispenser with 50’ of Blue wire

WD-30-Y Dispenser with 50’ of Yellow wire

WD-30-W Dispenser with 50’ of White wire

WD-30-R Dispenser with 50’ of Red wire

WD-30-TRI Dispenser with 50’ each Blue, White and Red wire

WD-30-B

R-30R-0050

WIRE WRAPPING

ACCESSORIES

Part No. Description

R-30B-0050 30 AWG (0.25mm) Blue 50ft. for WD-30-B

R-30Y-0050 30 AWG (0.25mm) Yellow 50ft. for WD-30-Y

R-30W-0050 30 AWG (0.25mm) White 50ft. for WD-30-W

R-30R-0050 30 AWG (0.25mm) Red 50ft. for WD-30-R

R-30-TRI 30 AWG (0.25mm) Red, White, Blue

50ft (15.2m) roll, each color for WD-30-TRI

Pre-Cut and Pre-Stripped Wire Wrapping Wire



50 pieces

per package



Kynar™ insulated



Silver plated

copper conductor



UL listed

30 AWG (0.25mm) Pre-Cut/Pre-Stripped Wire 50 Pieces/Pkg.

Insulation

Length

In. mm White Yellow Blue Red

125 30-W-50-010 30-Y-50-010 30-B-50-010 30-R-50-010

251 30-W-50-020 30-Y-50-020 30-B-50-020 30-R-50-020

376 30-W-50-030 30-Y-50-030 30-B-50-030 30-R-50-030

5 127 30-W-50-050 30-Y-50-050 30-B-50-050 30-R-50-050

KYNAR™ Insulated, Silver Plated Copper Conductor

UL Listed

24 AWG (0.50mm) Insulation diameter .030" (0.76mm)

Roll Size White Yellow Blue Red Black

100ft. (30.4m) roll R24W-0100 R24Y-0100 R24B-0100 R24R-0100 R24BLK-0100

26 AWG (0.40mm) Insulation diameter .027" (0.69mm)

Roll Size White Yellow Blue Red Black

100ft. (30.4m) roll R26W-0100 R26Y-0100 R26B-0100 R26R-0100 R26BLK-0100

28 AWG (0.32mm) Insulation diameter .024" (0.60mm)

Roll Size White Yellow Blue Red Black

100ft. (30.4m) roll R28W-0100 R28Y-0100 R28B-0100 R28R-0100 R28BLK-0100

30 AWG (0.25mm) Insulation diameter .0195" (0.50mm)

Roll Size White Yellow Blue Red Black

100ft. (30.4m) roll R30W-0100 R30Y-0100 R30B-0100 R30R-0100 R30BLK-0100

1000ft. (304.0m) roll R30W-1000 R30Y-1000 R30B-1000 R30R-1000 R30BLK-1000

KSW Wire Wrapping Wire Rolls for Cut/Strip/Wrap Applications

Low strip force KynarTM insulated wire for use with CSW bits and sleeves

Wire Size Insulation Dia. Roll Size

AWG mm In. mm Feet Meters Blue Yellow White Black Red

24 0.50 .030 0.76 100 30.4 KSW 24B-0100 KSW 24Y-0100 KSW 24W-0100 KSW 24BLK-0100 KSW 24R-0100

26 0.40 .027 0.69 100 30.4 KSW 26B-0100 KSW 26Y-0100 KSW 26W-0100 KSW 26BLK-0100 KSW 26R-0100

28 0.32 .0235 0.58 100 30.4 KSW 28B-0100 KSW 28Y-0100 KSW 28W-0100 KSW 28BLK-0100 KSW 28R-0100

30 0.25 .0195 0.50 100 30.4 KSW 30B-0100 KSW 30Y-0100 KSW 30W-0100 KSW 30BLK-0100 KSW 30R-0100

1000 304.0 KSW 30B-1000 KSW 30Y-1000 KSW 30W-1000 KSW 30BLK-1000 KSW 30R-1000

Kynar™ Pennwalt

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

EPB - 1000

Battery Punchdown Tool

EPB-1000 ACCESSORIES

PART

NUMBER DESCRIPTION

PTX-B EPB-1000 Battery 3.6V

PTX-BC1 EPB-1000 115V Battery Charger

PTX-BC2 EPB-1000 230V Battery Charger

H-1000 Cordura Tool Pouch

Quick, easy blade

lock & release

Ergonomically designed handle

A REVOLUTIONARY ERGONOMIC DESIGN

GUARANTEEING OPERATOR SAFETY & EFFICIENCY

The World’s First Battery

PUNCHDOWN TOOL

PTX-B

BATTERY 3.6V

PTX-BC1

PTX-BC2

BATTERY CHARGER

Low battery indicator

H-1000

CORDURA POUCH

• Ergonomically designed for worker safety

• Over 1,000 impacts between charges

• Adjustable impact settings

• Durable Lexan®housing

• 90˚ Blade orientation adjustment

• Quick-easy blade lock and release

• Low battery indicator

• Lightweight– weighs only 1.3 lbs.

•Measures 7.50”L x 6.75”H x 1.37”W

• Patent Pending

Ability to rotate blade

in 90˚ increments

Adjustable impact settings

Rugged construction

Short-throw

trigger

EPB-1000 TOOLS AND KITS

ITEM DESCRIPTION

EPB-1000 Battery Punchdown Tool (Battery Not Included)

EPB-1000KIT1 Battery Punchdown Tool Kit with 115V Charger & Battery

EPB-1000KIT2 Battery Punchdown Tool Kit with 230V Charger & Battery

18 134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

EPXI

Manual Punchdown Tool

EPXI TOOLS AND KITS

ITEM DESCRIPTION

EPXI Ergonomic Punchdown Tool

EPXI-KIT66 Ergonomic Punchdown Tool Plus 2 Blades (EP-66, EP-66C)

EPXI-KIT110 Ergonomic Punchdown Tool Plus 2 Blades (EP-110, EP-110C)

EPXI-KIT66110 Ergonomic Punchdown Tool Plus 4 Blades (EP-66, EP-66C, EP-110, EP-110C)

This revolutionary family of punchdown tools has been developed to satisfy the ergonomic

requirements of the technician while providing the convenience of a battery tool. We consulted with

certified ergonomists and created an ergonomic tool, which is lightweight, well-balanced and

designed with a long handle to mitigate pressure on the palm (alleviating the risk of carpal tunnel

syndrome and other related injuries.)

Storage compartment

holds up to 3 blades

Whether you choose our Battery Punchdown Tool (EPB-1000) or our Manual Punchdown

Tool (EPXI), you can be assured of receiving a 21st century designed product guaranteed to boost

operator efficiency (All punchdown tools on the market today with the exception of the EPB-1000

& EPXI are based on a 20-year-old concept.)

Weight 7.10 oz

Length 7.25”

Quick, easy blade

lock & release

Ability to rotate blade

in 90˚ increments

Ergonomic handle with

soft overmolded grip

Lever for easy adjustment

of low/high impact setting

66C 66 110C 110 7889112 KR BX

NOTE: THE EPXI AND THE EPB-1000 TOOLS ONLY OPERATE WITH

BLADES PRODUCED BY OK INDUSTRIES.

EPXI BLADE SPECIFICATIONS

ITEM DESCRIPTION WEIGHT LENGTH WIDTH THICKNESS

(OUNCES) (INCHES) (INCHES) (INCHES)

EP-66 Punchdown Blade 66 Block 0.25 1.25” .35” .18”

EP-66C Punchdown Blade 66 Block with Cutter 0.25 1.30” .35” .18”

EP-110 Punchdown Blade 110 Block 0.25 1.30” .35” .15”

EP-110C Punchdown Blade 110 Block with Cutter 0.25 1.30” .35” .15”

EP-7889112 Punchdown Blade Central Office Block 0.33 1.40” .35” .25”

EP-BX Punchdown Blade Bix Block 1.00 2.20” .40” .48”

EP-KR Punchdown Blade Krone Block 1.00 2.40” .40” .60”

Flared front prevents

slipping of hand

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

DESOLDERING PUMPS

Features

Precision regulated return.

Replaceable tip.

Compact, anti-corrosive plastic housing.

Precision metal plunger.

Sealed vacuum chamber.

Easy cleaning.

8” Long including tip

Part No. Description

DP-140 Desoldering Pump

DPT-100 1 Tip, DP-100/DP-140

A specially engineered desolder pump made to high specifications and providing precise

repeatable operation. Fitted with a Teflon Tip. 13” long including tip

HIGH-VACUUM DESOLDERING PUMPS

Features



Durable corrosion resistant

plastic construction.



Precision metal plunger.



Corrosion treated springs.



Insulated vacuum pulse.



Regulated return (1 millisecond ±30%).



Uniform reset pressure (11in. lbs. ±20%).



Cushioned shock reduction (pulse release

to minimize board damage).

Part No. Description

DP-100 High Vacuum Desoldering Pump

DP-200 High Vacuum Desoldering Pump, ESD Safe

DPT-100 1 Tip, DP-100/DP-140

DPT-200 1 Tip, DP-200

STATIC SAFE

DP-140

DP-100

DP-200

20 134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com

DPT-100

DPT-200

Specifications

Part No. SA-9-115 SA-91

SA-9-E-115 SA-91-E

Input Voltage 115V 115V

60Hz 60Hz

Maximum Air

Volume 105 to 126 CFM 105 to 126 CFM

Activated

Carbon Wt. 12g 12g

Unit Weight 2.2 lbs. (1 kg) 4 lbs. (1.8 kg)

Arm Length - 24" (607mm)

BENCHTOP FUME ABSORBERS

STATIC SAFE

SA-91/ SA-91-E

Articulating arm allows

optimized positioning and

saves bench space.



Aerodynamic hood design

effectively draws irritating

soldering fumes away from the

work area.



Carbon-impregnated filters trap a

limited portion of the flux fumes.



Compact size, low profile and

adjustable stand allows convenient

placement 6" to 8"

(152 to 203mm) from work area.



SA-9-E-115 feature

static-dissipative housings.

Part No. Description

SA-9-115 Benchtop fume absorber, 115V AC with 3 filters

SA-9-E-115 ESD-Safe benchtop fume absorber, 115V AC with 3 filters

Part No. Description

SA-91 SA-9-115 with Articulating Arm, & Bracket

SA-91-E SA-9-E-115 with Articulating Arm, & Bracket

SAK-90 Arm Assembly Kit Retro-fits SA-9/9-E to SA-91/SA-91-E

SAF-1 Replacement Filter Set, 3pcs.

SA-9-115 SA-9-E-115

Benchtop

Articulating Arm

SA-9-115/ SA-9-E-115

SAF-1

Phone (914) 793-0700 • Fax (914) 793-4527 email: sales@jonard.com

Bench mounting clamp and 3

filters come complete with unit.

SA-91-E features a

static-dissipative housing.

SA-91

PROTOTYPING AND REPAIR

PRODUCTS FROM OK INDUSTRIES

UNIVERSAL PLCC EXTRACTION TOOL EX-5/EX-6

INSERTION/EXTRACTION KIT WK-7

Part No. Description

EX-5 ESD safe PLCC extraction tool

EX-6 Low cost PLCC extraction tool

Features

Extracts a range of PLCC sizes from 20 pins through 84

pins from any socket without damage to the chip.

Spring loaded one-hand design requires no pulling, just

squeeze handles and chip is lifted from the socket.

ESD safe handles for use on all static safe

components (EX-5).

Machined stainless steel for long-life (EX-5).

EX-6 - ABS handles and stamped steel.

Part No. Description

WK-7 5 piece insertion/extraction kit

INS-1416 14-16 pin IC insertion tool (.3” pitch) with lead straightener

Note: WK-7 items may be purchased individually.

WK-7 kit includes DIP IC extractors and inserters to

accommodate all IC’s from 8 to 40 pins. All tools that

engage conductive surfaces are CMOS safe and

include grounding lugs where appropriate. The kit

consists of extractors EX-1 for 14-16 pin devices, and

EX-2 for 24-40 pin chips, plus inserters MOS-1416,

MOS-2428, and MOS-40 for 14-16, 24-28 and 36-40

pin IC’s respectively.

MOS-2428

(.6” Pitch)

EX-1

MOS-40

(.6” Pitch)

INS-1416

EX-2

MOS-1416

(.3” Pitch)

Kit Includes

MOS-1416 Insertion Tool (14-16 Pins).

MOS-2428 Insertion Tool (24-28 Pins).

MOS-40 Insertion Tool (36-40 Pins).

EX-2 Extraction Tool (24-40 Pins).

EX-1 Extraction Tool (8-24 Pins).

EX-6

EX-5

22 134 Marbledale Road • Tuckahoe, N. Y. 10707 www.okindustries.com