POWER
DPS50-M
60 Watts
Medical
Total Power: 30 - 60 Watts
Input Voltage: 90 - 264 Vac
127 - 300 Vdc
# of Outputs: Single
SPECIAL FEATURES
Medical safety approvals
CE Mark EMC & LVD (except DPS52-M)
Universal AC input
Fully regulated output
Overload and short circuit protection
Internal remote sense to the output
plug
Constant voltage
Level V efciency (except DPS52-M)
High MTBF
IEC320 AC receptacle, 3 pin (type C14)
Built-in EMI lter (CISPR 22 Class B)
LED power good indicator
Input power <74 watts
Complies with EN61000-3-2
Meets Energy Star
SAFETY
UL UL 60601-1
CSA CSA-C22.2 no.601.1-M90
VDE 07501/EN60601-1 (IEC601)
CE EMC & LVD (except DPS52-M)
Electrical Specications
Input
Input range 90 - 264 Vac (wide range)
127 - 300 Vdc
Frequency 47 - 440 Hz
Inrush current <60 A @ 230 Vac, cold start @ 25
°
C
Input current <2.0 A rms @ 115 Vac; <1 A @ 230 Vac
Efciency 88% typical
EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B
Safety ground leakage current 275 μA max. @ 50/60 Hz, 264 Vac input
Output
Maximum Power (Po) 60 W (DPS52, 30 W)
Hold-up time 10 ms typical at full load @ 115 Vac
Overvoltage protection 20% - 45% above nominal output maximum
Latching type, recycle AC to reset.
Overload protection Output short circuit protection auto recover
Overload protected @ 120 - 150% above maximum rating
Cable/connector
DC cable with 2.5 mm center plug
DC plug center +v
DC plug outer -v
Environmental Specications
Operating temperature:
0 °C to +40 °C ambient.
-20 °C start up
Storage temperature: -40 °C to +85 °C
Electromagnetic susceptibility:
Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, level 3
Humidity: Operating; non-condensing 10% to 90% RH
Vibration: Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz
to 500 Hz, operational
MTBF demonstrated: > 550,000 hours at full load and 25 °C ambient conditions
Data Sheet
DPS50-M Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and
service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc.
All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.
www.artesyn.com
DPS50-M-DS 23Oct2015
Ordering Information
Model
Number
Maximum
Power
Output
Voltage
Maximum
Load Peak Load1Regulation2Ripple
P/P (PARD)3
DPS52-M* 30 W 5 V 6 A 6.5 A ± 2% 50 mV
DPS53-M 60 W 12 V 5 A 5.4 A ± 2% 120 mV
DPS54-M 60 W 15 V 4 A 4.3 A ± 2% 150 mV
DPS55-M 60 W 24 V 2.5 A 2.7 A ± 2% 240 mV
DPS58-M 60 W 48 V 1.25 A 1.35 A ± 2% 480 mV
1. Peak current lasting <15 seconds with a maximum 10% duty cycle.
2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges.
* No CE approval under new EUP directive
Notes:
1. Specications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ± 0.02” (±0.5 mm)
3. Warranty: 2 year
4. Weight: 1.06 lb./.48 kg
5. AC input power cord sold separately.
6. Specications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated
Mechanical Drawing
2.39"
(60.7)
5.24"
(133.0)
1.62"
(41.0)
78.7"
(2000±15)
MODEL LABEL
DC OUTPUT CABL E
INDICATOR LE D
AC INLET