C44/3 NISSEI-ARCOTRONICS MKP Series ALUMINIUM CASE CAPACITOR A.C. and D.C. FILTER APPLICATIONS TECHNICAL DATA General technical data Application class (DIN 40040) Temperature range (Case) Max permissible ambient temperature (operation at rated power, rated current and natural cooling) Capacitance tolerance code (15th digit) Test voltage terminal to terminal UTT Test voltage terminal to case UTC Rated insulation voltage Ui Rated power Q Rated frequency F Permissible relative humidity IEC climatic category Degree of protection Capacitance deviation in the operating temperature range of -40 to +85 C Change of capacitance versus operating time Terminals Installation Life Expectancy Failure quota VDE 0560 - IEC 61071 - EN 61071 HSD / LS -40 to +70 C + 70 C J = 5%; K = 10% 1.5 x URMS for 10 seconds 4KV - 50Hz for 60 seconds 700V - 50Hz - Insulation group B (VDE 0110 part 1) Reactive power at rated A.C. voltage URMS - 50Hz 50 / 60Hz Annual average humidity should be 95%; however, on 30 days per year it can be continuously 100% and on the other days it can be occasionally 100%. Dewing not permitted 25 / 70 /21 IP00 1.5% max on capacitance value measured at +20C -3% after 30,000 hours at URMS or after 100,000 hours at UN Tinned brass fastons or screws (see figure above) Any position 30,000 hours at URMS; 100,000 hours at UN 300 / 109 components hour C44/3 NISSEI-ARCOTRONICS MKP Series ALUMINIUM CASE CAPACITOR A.C. and D.C. FILTER APPLICATIONS Mechanical Characteristics Case D W 76 76 85 13 25 25 Brass Screw Terminals Bolt Driving Driving Creepage Clearance M Torque Torque distance In air Nm Nm M6 4 18 22 10 M 10 7 18 22 10 M 10 7 22 22 10 Peak Voltage Table Un V400 600 750 1200 UPK V600 800 1000 1600 Test voltage Vac 375 570 660 825 GENERAL CHARACTERISTICS C F Q KVAR Un Vdc URMS Vac dv/dt V/s 150 200 250 300 400 100 150 200 100 120 50 60 2.95 3.93 4.90 5.89 7.85 4.53 6.80 9.07 6.08 7.30 4.75 5.7 400 400 400 400 400 600 600 600 750 750 1200 1200 250 250 250 250 250 380 380 380 440 440 550 550 10 10 10 10 10 20 20 20 20 20 30 30 All dimensions are in mm. IPK A 1500 2000 2500 3000 4000 2000 3000 4000 2000 2400 1500 1800 Tolerance: IRMS A Case D H 30 76 138 30 85 137 60 85 185 90 85 230 90 85 270 30 76 138 60 85 200 60 85 260 60 85 185 60 85 200 60 85 260 60 85 260 J ( 5%); K ( 10%) Approx. Weight Kg 0.63 0.75 1.05 1.35 1.71 0.63 1.15 1.50 1.05 1.15 1.50 1.5 Part Number C44EFGP6150ZA0C44EFGR6200ZA0C44EFGR6250ZA0C44EFGR6300ZA0C44EFGR6400ZA0C44EHGP6100ZA0C44EHGR6150ZA0C44EHGR6200ZA0C44EKGR6100ZA0C44EKGR6120ZA0C44EPGR5500ZA0C44EPGR5600ZA0- URMS Vac 250 380 440 550 C44/3 NISSEI-ARCOTRONICS MKP Series 45 ALUMINIUM CASE CAPACITOR A.C. and D.C. FILTER APPLICATIONS Mechanical Characteristics Case D W 76 76 85 95 13 25 25 25 Brass Screw Terminals Bolt Driving Driving Creepage Clearance Thread Torque Torque distance In air Nm Nm M6 4 18 22 10 M 10 7 18 22 10 M 10 7 22 22 10 M 10 7 22 22 10 Peak Voltage Table Un V400 600 750 1200 UPK V600 800 1000 1600 Test voltage Vac 375 570 660 825 URMS Vac 250 380 440 550 GENERAL CHARACTERISTICS C F Q KVAR Un Vdc URMS Vac dv/dt V/s IPK A 200 250 300 400 500 600 100 200 300 100 150 200 50 60 75 3.93 4.91 5.89 7.85 9.81 11.8 4.53 9.07 13.6 6.08 9.12 12.16 4.75 5.70 7.15 400 400 400 400 400 400 600 600 600 750 750 750 1200 1200 1200 250 250 250 250 250 250 380 380 380 440 440 440 550 550 550 10 10 10 10 10 10 20 20 20 20 20 20 30 30 30 2000 2500 3000 4000 5000 6000 2000 4000 6000 2000 3000 4000 1500 1800 2250 IRMS A 60 60 60 65 65 65 25 60 65 60 60 65 60 60 65 Tolerance: Case D H L 89 155 202 89 195 242 79 268 315 89 268 315 89 268 315 99 280 327 79 155 202 89 268 315 99 248 295 89 195 242 89 268 315 99 280 327 89 268 315 89 268 315 99 280 327 J ( 5%); K ( 10%) Approx. Weight Kg 0.95 1.10 1.25 1.71 1.75 2.15 0.82 1.71 2.15 1.10 1.71 2.15 1.65 1.71 2.15 Part Number C44PFGR6200AA0C44PFGR6250AA0C44PFGR6300AA0C44PFGR6400AA0C44PFGR6500AA0C44PFGR6600AA0C44PHGR6100AA0C44PHGR6200AA0C44PHGR6300AA0C44PKGR6100AA0C44PKGR6150AA0C44PKGR6200AA0C44PPGR5500AA0C44PPGR5600AA0C44PPGR5750AA0- All dimensions are in mm. Note: Care should be taken to ensure that there is still electrical clearance of 15mm between terminations and other live or earthed part above the capacitor, in case of safety device activation.