F-210-1 SUPPLEMENT ALC-314-SGT MOLD -TO-P PROD OSITION UCT Minimu m s may ap or set-up cha rg ply. Ca ll Samte es c. (2,54mm) .100" ALC-624-NGG ALC SERIES ALUMINUM DIP SOCKET CARRIER Mates with: APA Aluminum Carriers for Direct Soldering to PC Boards Samtec aluminum carriers are available in the most popular DIP lead counts for direct mounting of lead sockets to the printed circuit board. They are ideal for vapor phase, infrared and other high temperature soldering techniques. Low insertion force, six-finger contacts or standard insertion force four-finger contacts are available. Shell styles include ultra-low profile designs. ROW SPACING & NO. OF CONTACTS ALC STYLE OPTION OTHER OPTION PLATING OPTION GG Specify from chart below GT -3XX =(7,62) .300 -6XX =(15,24) .600 Row Space -314 -316 -318 -320 -324 -624 -628 -632 -640 = 30" (0,76m) Gold Contact, Tin Shell (2,54) .100 TYP No. of Contacts 14 16 18 20 24 24 28 32 40 (7,62) .300 (15,24) .600 -L = 30" (0,76m) Gold Contact 10" (0,25m) Gold Shell = Locking Socket Requires Style -S, -ZS, or -ZP and .035".003" board hole. TT (7,62) .300 = Tin Contact and Shell (Styles -S,-ZS, -L,-M,-N only) (3,43) .135 Requires GT Plating Option ST = 10" (0,25m) Gold Contact Tin Shell (Styles -S & -ZS only) Lead DIA Accepted = .015" to .022" (0,38mm to 0,56mm) Insertion Depth = .095" to .150" (2.41mm to 3,81mm) Component Part No. = SC-1L1 or EZ-1L1 Low Insertion Force (LIF) Contacts Available. SPECIFICATIONS For complete specifications see www.samtec.com?ALC Insulator Material: None Carrier Material: Aluminum Contact: BeCu Shell: Brass Plating: Au over 50" (1,27m) Ni or Sn over 100" (2,54m) Cu or 50" (1,27m) Ni Current Rating: 1A Contact Resistance: 10 m min Insertion Force: Standard = 9 oz (2,50N) avg, 16 oz (4,45N) max Low Insertion Force = 2.5 oz (0,70N) avg, 5.5 oz (1,53N) max Withdrawal Force: Standard = 2.5 oz (0,70N) avg, 1.5 oz (0,42N) min Low Insertion Force = 2.0 oz (0,56N) avg, 0.35 oz (0,10N) min except Styles ZM & ZN = 2.0 oz (0,56N) avg, 0.5 oz (0,14N) min Note: Some sizes, styles and options are non-standard, non-returnable. -S = Standard Solder Tail For LIF Specify -ZS Locking lead (-L) available. See OPTION. (0,76) .030 (1,32) .052 DIA (0,51) .020 DIA For LIF Specify -ZL (0,76) .030 (7,62) .300 (3,18) .125 Lead DIA Accepted = .015" to .022" (0,38mm to 0,56mm) Insertion Depth = .095" to .150" (2,41mm to 3,81mm) Style S Component Part No. = SC-1P1 Style ZS Component Part No. = EZ-1P1 -M = Low Profile, Standard Mount For LIF Specify -ZM (0,51) .020 (1,32) .052 DIA -L = Low Profile, Hollow Leg (4,83) .190 (2,41) .010 .095 .010 (0,74) .029 DIA (1,32) .052 DIA (0,74) .029 DIA Lead DIA Accepted = .015" to .020" (0,38mm to 0,51mm) Insertion Depth = .105" to .170" (2,76mm to 4,32mm) Style L Component Part No. = SC-3P1 Style ZL Component Part No. = EZ-3P1 -N = Low Profile, Micro Socket For LIF Specify -ZN (0,76) .030 (1,32) .052 DIA (0,51) .020 DIA Lead DIA Accepted = .016" to .021" (0,41mm to 0,53mm Insertion Depth = .080" to .115" (2,03mm to 2,92,mm) Style M Component Part No. = SC-4P1 Style ZM Component Part No. = EZ-4P1 WWW.SAMTEC.COM (5,84) .230 (2,74) .010 .108 .010 (5,20) .205 (0,89) .035 Lead DIA Accepted = .016" to .020" (0,41mm to 0,51mm) Insertion Depth = .080" to .150" Style N Component Part No. = SC-5P1 Style ZN Component Part No. = EZ-5P1