Data Brief
For further information contact your local STMicroelectronics sales office.
October 2007 Rev 1 1/4
4
STEVAL-MKI010V1
LIS3L02AS4 adapter board designed to be plugged into a
standard DIL 20 socket
Features
■Complete LIS3L02AS4 pinout in standard DIL
20 socket
Description
The STEVAL-MKI010V1 adapter board is based
on LIS3L02AS4 3-axis analog output linear
accelerometer and is intended to provide the user
with an effective solution for fast system
prototyping and device evaluation directly within
the user’s application.
The STEVAL-MKI0010V1 is designed to be
plugged into a standard DIL 20 socket. It provides
the user with the complete LIS3L02AS4 pinout,
and comes ready-to-use with the required
decoupling capacitors on the VDD power supply
line.
The pinout of the adapter is designed to be fully
compatible with all other available adapter boards
so that the user can easily switch from one sensor
to another during evaluation without the need for
board redesign
STEVAL-MKI010V1
www.st.com
Board schematic STEVAL-MKI010V1
2/4
1 Board schematic
Figure 1. Scheme
1
2
3
4
5
6
7
8
9
10
11
12
Header 12
JP1
24
23
22
21
20
19
18
17
16
15
14
13
Header 12
JP2
+
10 uF
C2
100nF
C1
P01
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
P12 P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P13
P01
NC
1
NC
2
NC
3
NC
4
NC
5
GND
6
VDD
7
Vy
8
ST
9
Vx
10
PD
11
Vz
12 FS 13
Rsvd 14
Rsvd 15
Rsvd 16
Rsvd 17
Rsvd 18
NC 19
NC 20
NC 21
NC 22
NC 23
NC 24
LIS3L02AS4
P01
P01
P13
P17P08
P06
P04
P18
P16
P01
P13
P01
P01
STEVAL-MKI010V1 Revision history
3/4
2 Revision history
Table 1. Document revision history
Date Revision Changes
16-Oct-2007 1 Initial release
STEVAL-MKI010V1
4/4
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
y
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
