Catalog
July
05
Distributed I/O and Control
Modicon Momentum
Automation and control
Motion control
Lexium 17D
05
Catalogue
April
Automation and control
Motion control
Lexium 17D
05
Catalogue
April
Not all products shown in this catalogue are available in every country.
Check individual country’s web site or Sales Office for product availability.
See on: www.schneider-electric.com
Automation
Detection
Global Detection
Electronic and
electromechanical sensors
N° 54752 - MKTED203031EN
Limit switches
Proximity sensors
Photo-electric and ultrasonic
sensors
Pressure switches
Rotary encoders
Software
Safety mat configuration
software
Modicon Momentum
distributed I/O and control
N° 807861 - MKTED205061EN
Automation platform
Modicon Quantum and
Unity - Concept Proworx
software
N° 802621 - MKTED204071EN
Automation platform
Modicon Premium and
Unity - PL7 software
N° 802625 - MKTED204072EN
Automation platform
Modicon TSX Micro and
PL7 software
N° 70984 - MKTED204012EN
PLCs, PC based control
Distributed I/O
Communication
Automation and relay
functions
N° 70455 - MKTED204011EN
Plug-in relays
Electronic timers
Control relays
Counters
Smart relays
Software
PLCs and safety controllers
programming software
Operator dialog
Control and signalling
components
N° 805911 - MKTED205021EN
Control and signalling units
Cam switches
Beacons and indicator banks
Control and pendant stations
Controllers
Front panels, mounting kits
Emergency stops
Foot switches
Human/Machine interfaces
N° 96949 - MKTED2040401EN
Operator interface terminals,
industrial PCs, Web servers,
HMI and SCADA PC-based
software
Software
Operator terminal software
Motor control
Motor starter solutions
Control and protection
components
N° 27501 - MKTED201001EN
Contactors
Circuit-breakers, fuse carriers
Thermal relays
Combinations, motor
controllers
Mounting solutions
Motor starter mounting kits
Soft starters and variable
speed drives
N° 802660- MKTED204091EN
Software,
Variable speed drives
Software
Motor control programming
software
Telemecanique,
catalogues for p p p p p p p p p p p p
Automation
N° 807861
MKTED205061EN
Automation
Mounting systems
Detection
Interfaces & I/O
Networks & communication
Operator dialog Software tools
Motion control
Motor control
Power supply
Motion control
Motion control Lexium 17D
N° 806381 - MKTED205031EN
Twin Line Motion control
N° 061233 -
DIA7ED2030902EN
Servodrives and brushless
motors
Motion control modules
Modicon Premium and
Modicon Quantum
Software
Software for drives and motors
Power supplies
Interfaces, I/O splitter boxes
and power supplies
N° 70263 - MKTED203113EN
Switch mode power supplies
Filtered rectified power
supplies and transformers
Machine safety
This catalogue contains
Automation and Control
function products relating to
Safety
Safety solutions using
Preventa
N° 67341 - MKTED203111EN
Safety monitors and
controllers on AS-Interface
Switches, light curtains, mats
Emergency stops, control
stations, enabling switches,
foot switches, beacons &
indicator banks
Optimum and universal
controllers
Switch disconnectors,
thermal-magnetic motor circuit
breakers, enclosed D.O.L.
starters
Interfaces & I/O
Interfaces, I/O splitter boxes
and power supplies
N° 70263 - MKTED203113EN
Plug-in relays
Analog converters
Discrete interfaces
Pre-wired interfaces
IP67 Splitter boxes
Connectors
Cable ends, terminal blocks
IP 20 distributed inputs/
outputs Advantys STB
N° 804818 - MKTED204101EN
Modules for automation island
Network interface,
power distribution, digital I/O,
analogs and application-specific
Software
Software to design and install
AS-Interface system, safety
monitors and controllers on
AS-Interface programming
software
STB configuration software
AS-Interface
This catalogue contains
Automation and Control
function products relating to
the AS-Interface cabling
system
AS-Interface cabling system
N° 804961 - MKTED204121EN
IP20/IP67 interfaces, cables,
repeaters, addressing and
adjustment terminals
Control stations, keypads,
beacons & indicator banks
Master modules for PLCs
AS-Interface power supplies
Motor controllers, enclosures,
variable speed drives
Networks & communication
Ethernet TCP/IP
Transparent Ready
N° 802731 - MKTED204073EN
Connecting Ethernet devices
Web-enabling PLCs on
Ethernet
Application protocols
and field buses
Simply Smart !
p p p p p p p p all Automation & Control functions
Contents Distributed I/O and control
Modicon Momentum
bPresentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
6 & 7
Discrete I/O bases
Selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
8 - 11
bPresentation, description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
12
bCharacteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
13 - 18
bReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
19
bDimensions, mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
20
bConnections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
21 - 25
Analog I/O bases
Selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
26 & 27
bPresentation, description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
28
bCharacteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
29 - 33
bReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
34
bDimensions, mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
35
bConnections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
36 & 37
Specialty module I/O bases
Selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
38 & 39
bPresentation, description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
40
bCharacteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
41
bReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
42
bConnections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
43
Communication adapters
Selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
44 - 47
bEthernet TCP/IP network communication adapters . . . . . . . . . . . . . page
48 & 49
bModbus Plus network communication adapters . . . . . . . . . . . . . . . page
50 - 53
bFipio bus communication adapters . . . . . . . . . . . . . . . . . . . . . . . . . page
54 & 55
bINTERBUS bus communication adapters . . . . . . . . . . . . . . . . . . . . . page
56 & 57
bProfibus DP bus communication adapter . . . . . . . . . . . . . . . . . . . . page
58 & 59
bDeviceNet network communication adapter . . . . . . . . . . . . . . . . . . page
60 & 61
4Schneider Electric
5
Schneider Electric
M1/M1E processor adapters and option adapters
Processor adapters selection guide . . . . . . . . . . . . . . . . . . . . . . . . page
62 & 63
bM1/M1E processor adapters
vPresentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
64
vDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
65
vCharacteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
66 - 69
vReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
70
vPower supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
71
Option adapters selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . page
72 & 73
bOption adapters
vPresentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
74
vDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
75
vCharacteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
76
vReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
77
Ethernet cabling system
bConneXium hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
78
bConneXium transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
79
bConneXium switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
80 - 82
bConneXium connection cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
83
Programming software (for M1/M1E processor adapters)
bConcept IEC programming software
vPresentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
84
vFunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
85 - 88
vReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
89
bProWORX 32 for 984 Ladder Logic programming
vPresentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
90 - 92
vReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
93
Additional products and services
bOptional conformal coating for aggressive environments
vPresentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
94
vReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
95
bEnhanced grounding system
vPresentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
96
vReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
96
bUser documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
97
bAutomation product certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
98
bCommunity regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
99
bProduct reference index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
100
6Schneider Electric
Presentation Modicon Momentum automation
platform 0
Introduction
The Momentum I/O system comprises 4 fundamental components that easily snap
together in various combinations to form versatile distributed I/O system.
The four pieces are:
1I/O bases
2Communication adapter
3Processor adapters
4Option adapters.
Momentum’s design separates the communications from the I/O base 1, thus
creating a truly open I/O system that can be easily adapted to any field-bus network.
When a Momentum I/O is coupled with a communication adapter 2, the two form a
remote I/O drop that connects directly to virtually any standard field-bus I/O network.
Together, Momentum I/O supports control systems based on personal computers,
distributed control systems, programmable controllers and Momentum processors.
(1) The processor adapters 3 are only compatible with the Concept or ProWORX software.
A modular concept with four easy pieces
1 I/O base
2 Communication adapter
4 Option adapter (1)
3 Processor adapter (1)
Momentum communication adapters 2
2 DeviceNet communication adapter
2 INTERBUS communication adapter
2 Modbus Plus communication adapter
7
Schneider Electric
Presentation (continued) Modicon Momentum automation
platform 0
Introduction
Specialized Momentum I/O bases support the rest of the control system. The
communication adapters 2, processor adapters and option adapters all snap onto the
I/O bases 1. A selection of I/O base modules are available, including analog I/O,
discrete I/O, multi-function analog and bi-directional discrete bases. In addition,
Momentum I/O bases offer simple plug-in terminal strips, as well as standard 35 mm
DIN rail or panel mounting for ease of maintenance and installation.
When local distributed intelligence is required at the point of control, Momentum has
the answer. Momentum M1 processor adapters 3 are full fledged PLCs containing a
CPU, RAM and Flash memory. They are based on the popular Modicon family of
PLCs (i.e., directly compatible with Quantum, Compact and 984 PLCs), and snap
onto the Momentum I/O bases 1, just like the communication adapters 2.
The option adapter 4 provides the processor adapters with additional networking
capabilities, a time-of-day clock, and a battery back-up. The option adapters also
snap onto the I/O base; in the figure below, the processor adapter is stacked on top.
If your control system needs to operate in a corrosive environment, selected
Momentum modules can be ordered with a conformal coating applied to components
of the product. Conformal coating will extend its life and enhance its environmental.
performance capabilities.
See pages 94 and 95.
Due to new INTERBUS standards for electrical noise immunity, a number of
Momentum products have been updated to include the enhanced grounding system,
which is required to meet the revised electrical noise immunity standard (ability to
pass a 2.2 kV electrical fast transient burst test).
See page 96 for a list of Momentum products that currently have been updated to
include the new grounding system.
(1) The processor adapters are only compatible with the Concept or ProWORX software.
Momentum I/O bases 1
1 I/O base
2 Communication
adapter
Momentum processor adapters 3 and option adapters 4 (1)
Optional conformal coating
Enhanced grounding system
1 I/O base
3 Processor
adapter (1)
4 Option
adapter
8Schneider Electric
Selection guide Modicon Momentum automation
platform 0
Discrete I/O bases
Product type Input modules for direct current Input modules for alternating current
Type of signal True high
Operating voltage and Input voltage 24 VDC 120 VAC 230 VAC
Current consumption max. 250 mA max. 125 mA
Input type IEC 1131 Type 1+ IEC 1131 Type 2 IEC 1131 Type 1+
Output voltage –
Output type –
Number of points 1 x 16 In 2 x 16 In 2 x 8 In
Potential isolation Point to point None None
Group to group None 1780 VAC
Field to adapter 500 VAC 1780 VAC
Current capacity Per output –
Per group –
Per module –
Response time OFF-ON 2.2 ms 10 ms @ 60 Hz 13.3 ms @ 60 Hz
ON-OFF 3.3 ms 35 ms @ 60 Hz 13.3 ms @ 60 Hz
Protection against short circuit and overload –
Fault reporting Output fault –
I/O error –
Blown fuse –
Type of module 170ADI 34000 170ADI 35000 170ADI 54050 170ADI 74050
Pages 13
9
Schneider Electric
0
Output modules for direct current Output modules for alternating current Relay output
module
True high
24 VDC 120 VAC 230 VAC 120 to 230 VDC
max. 250 mA max. 125 mA max. 65 mA 125 mA @ 120 VAC
65 mA @ 230VDC
–
24 VDC 120 VAC 230 VAC 20 to 250 VAC
5 to 30 VDC
Solid state switch Triac Relay from “C”
2 x 8 out 2 x 16 out 2 x 4 out 2 x 8 out 2 x 4 out 2 x 8 out 6 out (isolated)
None None 1780 VAC for 1 mn
None None 1780 VAC for 1 mn
500 VAC 1780 VAC 1780 VAC for 1 mn
0.5 A 0.5 A 2 A 0.5 A 2 A 0.5 A 5 A
4 A 8 A 4 A 4 A 4 A 4 A 5 A
8 A 16 A 8 A 8 A 8 A 8 A 21 A @ 60 °C
25 A @ 30 °C
< 0.1 ms max. 1/2 x 1/f 10 ms
< 0.1 ms max. 1/2 x 1/f 20 ms
Electronically safeguarded 1 fuse per group –
1 LED/Out 1 LED/4 Out None –
to adapter to adapter None –
– – 1 LED –
170ADO34000 170ADO35000 170ADO53050 170ADO54050 170ADO73050 170ADO4050 170ADO83030
14
10 Schneider Electric
Selection guide (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Product type I/O modules for direct current
Type of signal True high True low True high
Input voltage 24 VDC
Operating voltage 24 VDC
Current consumption max. 250 mA max. 250 mA +
sensor current
Input type IEC 1131 Type 1+
Output voltage 24 VDC
Output type Solid state switch
Number of points 1 x 16 In, 2 x 8 Out 4 x 4 In, 2 x 4 Out
Potential isolation Point to point None
Group to group None
Field to adapter 500 VAC
Current capacity Per output 0.5 A 2 A
Per group 4 A 8 A
Per module 8 A 16 A
Response time OFF-ON 2.2 ms In, < 1 ms Out 60 μs in, < 1 ms Out 2.2 ms In, < 1 ms Out
ON-OFF 3.3 ms In, < 1 ms Out 80 μs in, < 1 ms Out 3.3 ms In, < 1 ms Out
Protection against short circuit and overload Electrically safeguarded outputs Electrically
safeguarded outputs
and 4 electronically
safeguarded sensor
supply group
Fault reporting Output fault 1 LED/Out
I/O error to adapter
Blown fuse –
Type of module 170ADM35010 170ADM35011 170ADM35015 170ADM37010
Pages 15 16
11
Schneider Electric
0
I/O modules for direct current I/O modules for direct and alternating current
True high
24 VDC 12, 24, 48 VDC 24 VDC 120 VAC
24 VDC 12, 24, 48 VDC 24 VDC 120 VAC
max. 180 mA 500 mA @ 12 VDC
250 mA @ 24 VDC
125 mA @ 48 VDC
max. 250 mA max. 160 mA
IEC 1131 Type 1+, monitored IEC 1131 Type 1+ IEC 1131 Type 2
24 VDC 12, 24, 48 VDC 24…230 VAC or 20…115 VDC 120…132 VAC
Solid state switch Relay (normally open) Triac
1 x 16 In, 1x 8 Out and
1x4Out
1 x 16 In, 1 x 16 Out 1 x 10 In, 2 x 4 Out 1 x 10 In, 1 x 8 Out
None None None 1780 VAC None
None None None 1780 VAC None
500 VAC 707 VDC 500 VAC 500 VAC 1780 VAC
0.5 A 0.5 A 2 A ohmic load 0.5 A
4 A group 1, 2 A group 2 –8 A ohmic load 2 A
6 A 8 A @ 50 °C, 7 A @ 60 °C 16 A ohmic load 4 A
2.2 ms In, < 1 ms Out 2.2 ms In, < 2.5 ms Out 2.2 ms In, < 10 ms Out max 1/2 x 1/f
3.3 ms In, < 1 ms Out 3.3 ms In, < 2.5 ms Out 3.3 ms In, < 10 ms Out max 1/2 x 1/f
Electronically safeguarded
outputs
Electrically safeguarded
outputs
None Varistor in parallel with each
contact
1 internal fuse per group
(not against overload)
1 LED/In, 1 LED/Out 1 LED/Out None None
to adapter to adapter None None
––– 1 LED/fuse
170ADM39010 170ADM85010 170ADM39030 170ARM37030 170ADM69051
15 16 17 18
12 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
Discrete I/O bases
The Momentum Automation Platform products are modular. Communication
Adapters and Processor Adapters are designed to work as functional modules when
they are snapped onto a Momentum I/O base. An I/O base requires some type of
Momentum Adapter assembled on it before it can be functional.
The I/O bases fit into compact standard housings that can be mounted on a DIN rail
or on panels in a cabinet. They read information from field sensing devices and
control discrete and analog field actuating devices. Terminal blocks and bus bars are
available for use with the bases so that they can be used to support 2-, 3-, and 4-wire
field devices.
The I/O field devices and the power supply to the module are connected via three
18-pin terminal blocks and an optional 1-, 2-, or 3-row busbar. The terminal
connectors are electrically connected to the module; the optional busbars not.
Busbars provide a common connection for the field devices and serve as protective
distribution connectors. Depending on the I/O base and the type and number of field
devices to which it is connected, a 1-, 2-, or 3-row busbar may be used.
Terminal blocks and busbars are ordered separately, and are not shipped with the
Momentum I/O bases. They are available in either screw-in or spring-clip versions.
170ADp discrete I/O base units comprise on the front panel:
1An internal interface connector for the communication module or processor
module.
2A locking and earth contact for the communication module or processor module.
3LED status indicators (the number of indicators will depend on the number of
channels).
4Up to three connectors for the removable terminal blocks (Modbus dependent).
5An grounding screw.
6A slot for the power strip.
7Two holes for panel mounting.
Connectors to be ordered separately:
bremovable screw or spring terminals 170XTS00p00
b1 to 3-row screw or spring bus bar 170XTS00p01.
Presentation
Description
1
3
4
7
4
5
4
2
76
Characteristics:
pages 13 to 18
References:
page 19
Dimensions, mounting:
page 20
Connections:
pages 21 to 25
13
Schneider Electric
Characteristics Modicon Momentum automation
platform 0
Discrete I/O bases
Characteristics of discrete input bases
Type of input base unit 170ADI34000 170ADI35000 170ADI54050 170ADI74050
Number of inputs 1 x 16 2 x 16 2 x 8
Input voltage V24 DC 120 AC 230 AC
Operating voltage V24 DC 85 to 132 AC
(@ 47 to 63 Hz)
164 to 253 AC
(@ 47 to 63 Hz)
Internal current mA 250 (@ 24 VDC) 125 (@ 120 VAC) 125 (@ 230 VAC)
Input voltage range V- 3 to 30 DC 0 to 132 AC 163 to 253 AC
ON voltage V+ 11 to 30 DC 74 AC minimum 164 AC minimum
OFF voltage V- 3 to + 5 DC 20 AC maximum 40 AC maximum
Input current ON mA 2.5 minimum 10.0 minimum
OFF mA 1.2 maximum 2.0 maximum
Input resistance k
Ω
4 9.5 @ 50 Hz
7.5 @ 60 Hz
9 @ 50 Hz
7.5 @ 60 Hz
Type of signal True High
Response time On-off maximum ms 3.3 35.0 @ 60 Hz 13.3 @ 60 Hz
Off-on maximum ms 2.2 10.0 @ 60 Hz 13.3 @ 60 Hz
Potential isolation Input to input None None
Group to group VNone 1780 AC
Field to communication interface V500 AC 1780 AC
Power dissipation W3 typical,
5 maximum
5.5 typical,
8.5 maximum
–
Agency approvals UL, e, CSA, FM
Class I, Div. II
UL, e, CSA UL, e, CSA, FM
Class I, Div. II
UL, e, CSA
References:
page 19
Dimensions, mounting:
pages 20
Connections:
pages 21 to 25
14 Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Characteristics of discrete output bases
Type of output base unit 170ADO34000 170ADO35000 170ADO83030
Number of outputs 2 x 8 2 x 16 1 x 6
Type of output Solid state switch Relay form “C”
Output voltage V24 DC 20 to 250 AC, 5 to 30 DC
Operating voltage V24 DC 120 to 230 AC
Internal current mA 250 @ 24 VDC 125 @ 120 VAC, 65 @ 230 VAC
Current Point maximum A0.5 0.5 5
Group A4 8 5
Module A816 21 @ 60 °C, 25 @ 30 °C
Min. output current mA –50
Leakage current mA < 1 @ 24 VDC < 0.1 @ 120 VAC
Surge current A5 for 1 ms 20 for 10 ms
On State Voltage drop V< 0.5 DC @ 0.5 A < 0.2 @ 30 VDC
Protection (short-circuits, overloads) Outputs electronically protected Via external 315 mA fast-blow fuse
Response time On-off maximum ms < 0.1 20 @ 60 Hz
Off-on maximum ms < 0.1 10 @ 60 Hz
Potential Isolation Output to output VNone 1780 AC for 1 minute
Output group to output group VNone 1780 AC for 1 minute
Field to communication interface V500 AC 1780 AC for 1 minute
Power dissipation W3.5 typical
4.5 maximum
6.0 typical
7.5 maximum
2.5
Agency approvals UL, e, CSA,
FM Class I, Div. II
UL, e, CSA UL, e, CSA, FM Class I, Div. II
Type of output base unit 170ADO53050 170ADO54050 170ADO73050 170ADO74050
Number of outputs 2 x 4 2 x 8 2 x 4 2 x 8
Type of output Triac
Output voltage V120 AC 230 AC
Operating voltage V120 AC (300 for 10 s, 400 for 1 cycle) 230 AC (300 for 10 s, 400 for 1 cycle)
Internal current mA 125 65
Current Point maximum A20.5 20.5
Group A4
Module A8
Min. output current mA 530 530
Leakage current mA 1.9 @ 120 VAC 2.5 @ 230 VAC 2.4 @230 VAC
Surge current APoint: 15 (1 cycle), 10 (2 cycles), 5 (3 cycles)
On State Voltage drop V< 1.5 AC @ 2 A < 1.5 AC @ 0.5 A < 1.5 AC @ 2 A < 1.5 AC @ 0.5 A
Protection (short-circuits, overloads) Via internal 5 A slow-blow fuse per group
Response time On-off maximum ms 1/2 x 1/f (= 0,5 of one line cycle)
Off-on maximum ms 1/2 x 1/f (= 0,5 of one line cycle)
Potential Isolation Output to output None
Output group to output group None
Field to communication interface V1780 AC
Power dissipation W6.0 typical
7.5 maximum
Agency approvals UL, e, CSA, FM Class I, Div. II
Description:
page 12
References:
page 19
Dimensions, mounting:
pages 20
Connections:
pages 21 to 25
15
Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Characteristics of discrete I/O bases
Type of base unit 170ADM35010 170ADM35011 170ADM35015 170ADM39010
Number of inputs 1 x 16 1 x 16
Number of outputs 2 x 8 1 x 8 and 1 x 4
Operating voltage VDC 24
Internal current mA 250 @ 24 VDC 180 @ 24 VDC
Inputs Voltage VDC 24
Type of signal True high True low True high
Voltage at 1 VDC + 11 to + 30 - 3 to + 5 + 11 to + 30
Voltage at 0 VDC - 3 to + 5 + 4 to + 30 - 3 to + 5
Input current mA 2.5 min. at state 1 (6 mA at c 24 V),1.2 max. at state 0
Input voltage range VDC - 3 to + 30
Input resistance kΩ4
Response time Off to on ms 2.2 0.06 2.2 In, < 1 Out
On to off ms 3.3 0.08 3.3 In, < 1 Out
Fault sensing –Broken wire
detection
Outputs Voltage VDC 24, 30 max.
Type Solid state switch
Type of signal True high True low True high
Current capacity A0.5 per point
4 per group
8 per module
0.5 per point
4 per group 1
2 per group 2
6 per module
Leakage current mA < 1 @ 24 VDC < 1 @ 24 VDC
Peak current A5 for 1 ms –
On state voltage drop VDC < 0.5 @ 0.5 A –
Error indication Output overload for at least one output to communication
adapter
Output overload for
at least one output
to communication
adapter
Response time Off to On ms < 0.1
On to Off ms < 0.1
Potential isolation Input to input None
Output to output group None
Input to output group None
Field to communication interface V500 AC
Power dissipation Typical W6.0 6.5
Maximum W8.0 10.0
Agency approvals UL, e, CSA UL, e, CSA, FM
Class I, Div. II
Description:
page 12
References:
page 19
Dimensions, mounting:
pages 20
Connections:
pages 21 to 25
16 Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Characteristics of discrete I/O bases
Type of base unit 170ADM 3701 170ADM 85010
Number of points Inputs 4 x 4 1 x 16
Outputs 2 x 4 1 x 16
Operating voltage VDC 24 12, 24, 48 (10 to 60)
Internal current mA 250 @ 24 VDC (plus current for sensors) 500 @ 12 VDC
250 @ 24 VDC
125 @ 48 VDC
Inputs Voltage VDC 24 12, 24, 48
Type of signal True high
Voltage at 1 VDC + 11 to + 30 > 7.5 @ 12 VDC
> 11 @ 24 VDC
> 30 @ 48 VDC
Voltage at 0 VDC - 3 to + 5 < 2.5 @ 12 VDC
< 5 @ 24 VDC
< 10 @ 48 VDC
Input current mA 2.5 min. at state 1 (6 mA at c 24 V),
1.2 max. at state 0
2.3 @ 12 VDC
2.7 @ 24 VDC
2.9 @ 48 VDC
Input voltage range VDC - 3 to + 30 10 to 60 V
Input resistance kΩ4 –
Response time Off to On ms 2.2 In, < 1 Out 2.2 In, < 2.5 Out
On to Off ms 3.3 In, < 1 Out 3.3 In, < 2.5 Out
Fault sensing –
Outputs Voltage VDC 24, 30 max. 12, 24, 48, 60 max.
Type Solid state switch
Type of signal True high
Current capacity A2 per point
8 per group
16 per module
0.5 per point
8 per group @ 50 °C
7 per module @ 60 °C
Leakage current mA < 1 @ 24 VDC < 1 @ 60 VDC
Peak current A2.8 for 1 ms 5 for 1 ms
On state voltage drop VDC –< 1 @ 0.5 A
Error indication Output overload for at least one output or
short-circuit or overload on one of the 4
encoder supply groups, to communication
adapter
Output overload for at least one output to
communication adapter
Response time ms < 0.1 Off to On, < 0.1 On to Off
Potential isolation Input to input None
Output to output group None
Input to output group VNone 707 DC
Field to communication interface Vrms 500 AC 707 DC
Power dissipation Typical W6.5 6.0 + (0.144 x nb of input points)
+ (0.25 x nb of output points)
Maximum W10.0 –
Agency approvals UL, e, CSA UL, e, CSA, FM Class I, Div. II
Description:
page 12
References:
page 19
Dimensions, mounting:
pages 20
Connections:
pages 21 to 25
17
Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Characteristics of discrete I/O bases (continued)
Type of base unit 170ADM39030 170RM37030
Number of points Inputs 1 x 10
Outputs 2 x 4
Operating voltage V24 DC 120 AC (47 to 63 Hz)
Internal current mA 250 @ 24 VDC 5 minimum load current
Inputs Voltage V24 to 230 AC
20 to 115 DC
Signal type True High
On voltage minimum VDC + 11 to + 30
Off voltage maximum VDC - 3 to + 5
Input current mA 2.5 minimum On, 1.2 maximum Off
Input voltage range VDC - 3 to + 30
Input resistance kΩ4
Response time ms 2.2 Off to On, 3.3 On to Off
Outputs Voltage V24 to 230 AC, 20 to 115 DC
Type Relay normally open
Current capacity 24 VDC A> 0.005 (new contacts), ohmic load 2 A maximum, inductive load 1 A maximum
(LR y 40 ms)
Current capacity 115 VDC AOhmic load 0.5 A maximum (switching current y 1.5 A), inductive load 0.15 A
maximum (LR y40 ms)
Current capacity VAC A2 A maximum (switching current y 1.5 A)
cosϕ = 1, 1 A maximum cosϕ = 0.5
2 A per point, 8 A per group, 16 A per
module
Leakage current mA < 1 @ 230 VAC –
Error indication None
Response time ms 10 @ 60 Hz Off to On, 10 @ 60 Hz On to Off
Max. number of switching circuits > 30 x 106 (mechanical), > 1 x 105 (inductive load with external protection circuit)
Protection against short circuit
and overload
None Varistor in parallel with each contact
Potential isolation Input to Input None
Output group to output Group V rms None 1780 AC
Input to output group V rms None 1780 AC
Field to communication
interface V rms 500 AC
Fusing Internal None
External operating voltage 315 mA fast-blow 4 A fast-blow
External input voltage max. 4 A fast-blow None
External output voltage According to the supply of the connected
actuators not to exceed 8 A
slow-blow/group
None
Power dissipation Typical W5.5
Maximum W8.5
Agency approvals UL, e, CSA UL, e, CSA, FM Class I, Div. II
Description:
page 12
References:
page 19
Dimensions, mounting:
pages 20
Connections:
pages 21 to 25
18 Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Characteristics of discrete I/O bases (continued)
Type of base unit 170ADM69051
Number of points Inputs 1 x 10
Outputs 1 x 8
Operating voltage VAC 120 (47 to 63 Hz)
Internal current mA 160 (@ 120 VAC)
Inputs Voltage VAC 120
Signal type True high
On voltage minimum VAC 74
Off voltage maximum VAC 20
Input current mA 6.0 minimum at state 1, 2.6 maximum at state 0
Input voltage range VAC 74 to 132
Input resistance kΩ4
Response time ms Maximum 1/2 x 1/f Off to On, maximum 1/2 x 1/f On to Off
Outputs Voltage VAC 120 to 132 (@ 47 to 63 Hz)
Type Triac
Current capacity 0.5 A per point maximum, 30 mA per point minimum, 2 A per group, 4 A per module
Leakage current mA < 1.3 (@ 120 VAC)
Signal type True High
On state voltage drop VAC < 1.5 (@ 0.5 A)
Error indication None
Response time ms 1/2 x 1/f maximum from state 0 to state 1, 1/2 x 1/f maximum from state 1 to state 0
Maximum switching cycles 3000 hr for 0.5 A inductive load
Potential Isolation Input to input None
Output group to output group None
Input to output group None
Field to communication interface Vrms 1780 AC
Power dissipation Typical W6
Maximum W8
Protection Internal fuses A2 x 2.5 slow-blow fuses
Agency approvals UL, e, CSA
Description:
page 12
References:
page 19
Dimensions, mounting:
pages 20
Connections:
pages 21 to 25
19
Schneider Electric
References Modicon Momentum automation
platform 0
Discrete I/O bases
(1) Operating voltage 24 VDC.
(2) Operating voltage 120 VAC.
Discrete input bases
Type of current Modularity
(no. of points)
Conformity
EC 1131-2
Reference
Weight
kg
DC 24 V 16 (1 x 16) Type 1 170ADI34000 0.190
32 (2 x 16) Type 1 170ADI35000 0.200
AC 120 V 16 (2 x 8) Type 2 170ADI54050 0.284
230 V 16 (2 x 8) Type 2 170ADI74050 0.284
Discrete output bases
Type of current Output voltage Modularity
(no. of points)
Current per
output
Reference
Weight
kg
DC solid state
protected
24 V 16 (2 x 8) 0.5 A 170ADO34000 0.210
32 (2 x 16) 0.5 A 170ADO35000 0.210
DC/AC relay form “C” 5…24 VDC
24…230 VAC
6 isolated 5 A 170ADO83030 0.260
AC triac
protected,
1 fuse per group
120 V 8 (2 x 4) 2 A 170ADO53050 0.320
16 (2 x 8) 0.5 A 170ADO54050 0.284
230 V 8 (2 x 4) 2 A 170ADO73050 0.320
16 (2 x 8) 0.5 A 170ADO74050 0.284
Discrete I/O bases
Type of output current Input
voltage
Output
voltage
Modularity Reference
Weight
kg
Input Outputs, current
DC solid state 24 VDC
Type 1+
24 VDC
protected
16 I (1 x 16) 16 O (2 x 8) 0.5 A 170ADM35010 0.200
16 I, fast (1 x 16) 16 O (2 x 8) 0.5 A 170ADM35011 0.200
16 I (1 x 16) 16 O (2 x 8) 0.5 A 170ADM35015 0.200
16 I, wiring
check (1 x 16)
12 O (1 x 8 and 1 x 4)
0.5 A
170ADM39010 0.260
16 I (4 x 4) 8 O (2 x 4) 2 A 170ADM37010 0.220
DC relay 12…60 VDC 12…60 VDC 16 I (1 x 16) 16 O (1 x 16) 0.5 A 170ADM85010 –
AC or DC relay 24 VDC
Type 1+
24/230 VAC
20/115 VDC
10 I (1 x 10) 8 O (2 x 4) 2 A 170ADM39030
(1)
0.260
170ARM37030
(2)
0.260
AC triac 100…120
VAC
Type 2
120 VAC 10 I (1 x 10) 8 O (1 x 8) 0.5 A
protected by 1 fuse
170ADM69051 0.220
Accessories
Description Composition Type of connection Reference
Weight
kg
Terminal blocks for I/O
base connection
Set of 3 connectors
1 row Screw 170XTS00100 –
Spring 170XTS00200 –
Bus Bar 3 rows Screw 170XTS00401 –
Spring 170XTS00301 –
2 rows Screw 170XTS00501 –
Spring 170XTS00801 –
1 row Screw 170XTS00601 –
Spring 170XTS00701 –
Cable grounding rail Used to connect
the cable shielding
–CER001 –
High vibration
environment clips
Kit containing 5 sets of clips – 170XTS12000 –
Dummy base unit Used to prewire the I/O base units
Requires screw or spring connection terminals
170BDM09000 –
Discrete input simulator 16 channels, 24 VDC – 170BSM01600 –
Replacement parts
Description Use Reference Weight
kg
Sheets of labels 10 front labels for Momentum modules 170XTS10000 –
Cable coding
part kit
For screw or spring connection terminals 170XCP20000 –
170ADI
pp
0
p
0
170ADO
pp
0
p
0
170ADM
pp
0
pp
170XTS00200
170XTS00401
170XTS00801
170XTS00601
CER001
170BSM01600
Description:
page 12
Characteristics:
pages 13 to 18
Connections:
pages 21 to 25
20 Schneider Electric
Dimensions,
mounting,
connections
Modicon Momentum automation
platform 0
Discrete I/O bases
Dimensions, mounting
170ADp, rail or panel mounting
(1) 2 holes for M4 screws, for panel mounting (1) Equipment or enclosure
Connections of discrete input bases
170ADI34000 170ADI35000
Example of external wiring of 2, 3 and 4-wire sensors Example of external wiring of 2 and 3-wire sensors
Group of channels Group of channels
Internal wiring Internal wiring
170ADI54050 170ADI74050
Example of external wiring of 2 and 3-wire sensors Example of external wiring of 2 and 3-wire sensors
Group of channels Group of channels
Internal wiring Internal wiring
(1)
107
125
93
141,5
47,5
62
125 60
(1)
IN + –
IN + – PE
1L+
M–
1
2
3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 M – L +
PE
24 V
Return
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
2-wire sensor
3-wire sensor
4-wire sensor
Option
IN + – IN + –
2L+1L+
M–M–1L+
1
2
3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 M – L+
2L+2L+
M–M–
M–M–
24 V
24 V
4 A max.
fast-blow
fuse
Return
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
3-wire sensor 3-wire sensor
2-wire sensor
Option
IN + - PE
2L1
2N
1L1
1N
1
2
3
1 2 3 4 5 6 7 8 9 10111213141516 N L1
120 V 120 V
4-wire sensor
2-wire sensor
Return Return
200 mA
slow-blow
fuse
2-wire sensor
IN + - PE
2L1
2N
1L1
1N
1
2
3
12345678910111213141516NL1
a 230 V a 230 V
Return
Return
200 mA
slow-
blow
fuse
4-wire sensor
2-wire sensor 2-wire sensor
Description:
page 12
Characteristics:
pages 13 to 18
21
Schneider Electric
Connections (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Connections of discrete output bases
170ADO34000 170ADO35000
Example of external wiring of 2 and 3-wire actuators Example of external wiring of 2 and 3-wire actuators
Group of channels Group of channels
Internal wiring Internal wiring
170ADO83030
Example of external wiring
Internal wiring
–+
PE
Out – PE
L+
1
2
3
123456789101112131415161L+2L+
M–
24 V
24 V
Return
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
315 mA
fast-blow
fuse
Option
2-wire actuator
3-wire actuator
–+
Out – PE
Out – PE
2L+1L+
M–M–
1
2
3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 M– L+
M–
PE
PE
PE
24 V
24 V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
Return
Option
3-wire actuator 3-wire actuator
2-wire actuator
1
2
3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 M– L+
PE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
L
N
17 18
123456789101112131415161718
01 02 03 04 05 06
01 02 03 04 05 06
Option
NO
NF
Output 1 Output 4 Output 6
Fast-blow
fuse
315 mA
120/230 VCA
Description:
pages 12
Characteristics:
pages 13 to 18
References:
page 19
Dimensions, mounting:
page 20
22 Schneider Electric
Connections (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Connections of discrete output bases (continued)
170ADO53050 / ADO54050 170ADO73050 / ADO74050
Example of external wiring of 2 and 3-wire actuator Example of external wiring of 2 and 3-wire actuators
Group of channels Group of channels
Internal wiring Internal wiring
Out - PE
L1N
1
2
3
PE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1N 1L1
LN
120 V
120 V
Fuse 2 (5 A slow-blow)Fuse 1(5 A slow-blow) Return
Return
2-wire actuator
3-wire actuator
Option
200 mA
fast-blow
fuse
10 A
fast-blo
w fuse
LN
Out - PE
L1N
1
2
3
PE
1 2 3 4 5 6 7 8 9 101112131415161N1L1
230 V
230 V
Fuse 1(5 A slow-blow) Fuse 2 (5 A slow-blow)
Return
Return
Option
10 A
fast-blow
fuse
200 mA
fast-blow
fuse
2-wire actuator
3-wire actuator
Description:
pages 12
Characteristics:
pages 13 to 18
References:
page 19
Dimensions, mounting:
page 20
23
Schneider Electric
Connections (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Connections of discrete I/O bases
170ADM35010 / ADM35011 / ADM35015
Example of external wiring of a 2-wire sensor/actuator Example of external wiring of a 3-wire actuator with wiring check
Group of channels Group of channels
Internal wiring Internal wiring
Example of external wiring of a 4-wire sensor activated by an output Example of external wiring of a 4-wire sensor/2-wire actuator
Group of channels Group of channels
Internal wiring Internal wiring
3L+
12345678
12345678
91012131516M–L+
1411
91012131516
1411
I6 O6
M–M–
1
2
3
1L1 2L+
24 V
24 V
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
Return
Option
2-wire sensor
2-wire actuator
PE
12345678910 1213 1516M–L+
1411
Out –PE
M–M–
1
2
3
1L12 L+
24 V
24 V
12345678910 1213 1516
1411
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
Return
3-wire actuator
Option
PE
12345678910 1213 1516M–L+
1411
IN +–PE
M–M–
1
2
3
1L12 L+
24 V
24 V
12345678910 1213 1516
1411
2-wire sensor
4-wire sensor
Option
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
Return
12345678910 1213 1516M–L+
1411
3L+
M–
PE
IN +–PE
M–M–
1
2
3
1L1 2L+
24 V
24 V
12345678910 1213 1516
1411
Return
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
4-wire sensor
2-wire actuator
Option
Description:
pages 12
Characteristics:
pages 13 to 18
References:
page 19
Dimensions, mounting:
page 20
24 Schneider Electric
Connections (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Connections of discrete I/O bases (continued)
170ADM39010 170ADM37010
Example of external wiring of 2-wire sensor/actuator Example of external wiring of 2 and 4-wire sensors/2-wire actuator
Group of channels Group of channels
Internal wiring Internal wiring
170ADM37010 (continued)
Example of external wiring of 3-wire actuator with wiring check Special external wiring, the output activates the sensor
Group of channels Group of channels
Internal wiring Internal wiring
3L+
12345678910 1213 1516M–L+
1411
I6
O6
M–M–
1
2
3
9 12 1L+ 2L+18
56 k
56 k
24 V
24 V
2-wire actuator
(connected
directly
to sensor)
Option
Return
200 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
4 A max.
fast-blow
fuse
12345678910 1213 1516M–L+
1411
M–
PE
IN +–PE
–
+
2M–1M –
1
2
3
1L+ 2L+
L+
L+L+L+
24 V
24 V
12345678910 1213 1516
1411
4-wire sensor 2-wire actuator 2-wire sensor
8 A max.
slow-blow
fuse
8 A max.
slow-blow
fuse
4 A max.
fast-blow
fuse
Option
Return
12345678910 1213 1516M–L+
1411
M–
PE
Out –PE
2M–1M –
1
2
3
1L+ 2L+
L+
L+L+L+
24 V
24 V
12345678910 1213 1516
1411
Option
Return
8 A max.
slow-blow
fuse
8 A max.
slow-blow
fuse
4 A max.
fast-blow
fuse
3-wire actuator
12345678910 1213 1516M–L+
1411
M–
PE
IN +–PE
2M–1M –
1
2
3
1L+2L+
L+
L+L+L+
24 V
24 V
12345678910 1213 1516
1411
Option
4-wire sensor
Return
8 A max.
slow-blow
fuse
8 A max.
slow-blow
fuse
4 A max.
fast-blow
fuse
Description:
pages 12
Characteristics:
pages 13 to 18
References:
page 19
Dimensions, mounting:
page 20
25
Schneider Electric
Connections (continued) Modicon Momentum automation
platform 0
Discrete I/O bases
Connections of discrete I/O bases (continued)
170ADM85010 170ADM39030
Example of external wiring of:
v4-wire sensor
v2-wire actuator
v3-wire actuator with wiring check
v2-wire sensor activated by output
Example of external wiring of 3 or 4 sensor/3-wire/actuator
Group of channels Group of channels
Internal wiring Internal wiring
(1) Fast-blow fuse:
c
12 V: 630 mA,
c
24 V: 315 mA,
c
48 V: 200 mA.
(2) Fast-blow fuse.
(1) For 4-wire sensor
(2) For 3-wire actuator
170ARM37030 170ADM69051
Example of external wiring of 4-wire sensor/3-wire actuator Example of external wiring of 4-wire sensor/2 and 3-wire actuators
Group of channels Group of channels
Internal wiring Internal wiring
–+
1M-1L+
16 2M-2L+
1
2
3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 M-L+
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
In – PE
+
P
4M
In –PE
10M
P
(1)
(2)
(2)
(2)
4
5
6
c 10…60 V
c 10…60
V
I1 I10 I14
O4 O10 O14
Return
2-wire
actuator 3-wire
actuator
315 mA
max. 4 A
max. 10 A
4-wire
sensor
Sensor
activated by
output
PE
12345678910 1L+M–M–1L+M–L+
IN L-PE
2N1N
1
2
3
1L+ 9 10 161L + 2 L1
1N
M– 2N
L-PE
24 V
L
N
(2)(1)
Option
3-wire sensor 2-wire actuator
Return
315 mA
fast-blow
fuse
4 A max.
fast-blow
fuse
8 A max.
slow-blow
fuse
8 A max.
slow-blow
fuse
PEPEPE
16 N
–
–
1L
IN PE
2N1N
1
2
3
4
L+
+
12 1L+ 2L1
1N
M
IN PE
–
8 A max.
slow-blow
fuse
4 A max.
fast-blow
fuse
a 120 V
N
4-wire sensor 3-wire actuator
Return
2L1
2N
PE
1L11N1N
2
3
4
5
6
1 2 34 56 7 8910 NC N2N L1
81N 1N1N
LN
1
INLNPE Out N PE
2-wire
sensor
4-wire sensor
2-wire actuator
Fuse 1
(2,5 A slow-blow)
Fuse 2
(2,5 A slow-blow) Return
Return
Return
a 115 V
a 20…132 V
a 115 V
315 mA
fast-blow
fuse
8 A max.
slow-blow
fuse
4 A max.
fast-blow
fuse
3-wire actuator
Description:
pages 12
Characteristics:
pages 13 to 18
References:
page 19
Dimensions, mounting:
page 20
26 Schneider Electric
Selection guide Modicon Momentum automation
platform 0
Analog I/O bases
Applications 24 VDC analog input bases
Operating voltage 24 VDC
Measurement range Inputs
± 5 V, ± 10 V, ± 20 mA
1-5 V, 4-20 mA
Inputs
± 5 V, ± 10 V, 4-20 mA
Inputs
± 25 mV, ± 100 mV,
Temperature probe
Pt 100, Pt 1000, Ni 100,
Ni 1000
Thermocouple
B, E, J, K, N, R, S, T
Modularity Input channels 8 differential inputs 16 single-ended inputs 4 differential inputs
Output channels –––
Discrete I/O –––
Resolution 14 bits + sign bipolar
15 bits unipolar
12 bits + sign 15 bits + sign
Update time 1.33 + 1.33 x no. of declared
channels (ms)
1 + 1.5 x no. of declared
channels (ms
500 ms
Potential isolation Between channels 200 VDC, 1 min None 400 VDC
Base and ground 500 VDC, 1 min 500 VDC, 1 min 500 VDC, 1 min
Channels and ground 500 VAC, 1 min 1780 VAC, 1 min 500 VAC
Protection Polarity inversion
Number in words In 8 words in 16 words in 4 words in
Out 2 words out 4 words out 4 words out
Fail states –
Type of communicating module 170AAI03000 170AAI14000 170AAI52040
Pages 29 30
27
Schneider Electric
0
24 VDC analog output bases 24 VDC mixed I/O bases (analog/discrete)
24 VDC 12 VDC 24 VDC
Outputs
± 10 V, 0-20 mA
Outputs
± 10 V, 4-20 mA
Inputs
± 5 V, ± 10 V, ± 20 mA
1-5 V, 4-20 mA
Outputs
± 10 V, 0-20 mA
Inputs
0 to 10 V
Outputs
0 to 10 V
Inputs
- 10 to + 10 V
Outputs
- 10 to + 10 V
–4 differential inputs 6 inputs with common point
4 outputs 2 outputs 4 outputs with common point
–4 inputs 24 VDC
2 outputs 24 VDC/0.5 A
4 inputs 12 VDC
2 outputs 12 VDC/1 A
8 inputs 24 VDC
8 outputs 24 VDC/0.25 A
12 bits + sign Inputs: 12…14 bits
(dep. on range)
Outputs: 12 bits
Inputs: 14 bits
Outputs: 14 bits
2 ms Inputs: 10 ms
Outputs: 1 ms
Inputs: 0.75 ms (for 6 inputs)
Outputs: 1.2 ms (for 4 inputs)
None None
500 VDC, 1 min 500 VAC, 1 min
500 VAC, 1 min 500 VAC, 1 min
Polarity inversion Short-circuits and overloads (for discrete outputs)
–5 words in 5 words in 12 words in
5 words out 5 words out 5 words out 12 words out
Hold, reset to zero, reset to full scale Hold or reset to zero
170AAO12000 170AAO92100 170AMM09000 170AMM09001 170ANR12090 170ANR12091
31 32 33
28 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
Analog I/O bases
The Momentum analog input bases enable acquisition of various analog values
encountered in industrial applications, including:
bStandard high level (
+
5 V,
+
10 V, 1-5 V, 4-20 mA,
+
20 mA).
bLow level (
+
25 mV,
+
100 mV).
bThermocouples (B, E, J, ...).
bTemperature probes (Ni ..., Pt ...).
The analog output bases are used to control analog field devices such as variable
speed drives, proportional control valves, etc. The current or the voltage is
proportional to the digital value defined by the user program. The outputs can be
configured so that when the program stops the outputs either reset to zero or hold
the last value received. This feature is useful during debugging since, if the outputs
are set to “Hold”, the operation of the analog field devices is not disturbed every time
the program stops.
In order to cover a wide range of applications, Momentum I/O bases offer the
following functions in addition to A/D or D/A conversion:
bChoice of input/output ranges (voltage, current, thermocouple, temperature
probes).
bSelection of number of channels used.
bCold junction compensation for thermocouple modules.
bBroken wire detection (170AAI03000, 170AAI14000, 170AAI52040).
170App analog I/O base units comprise on the front panel:
1Internal interface connector for the communication module or processor module.
2A locking and earth contact for the communication module or processor module.
3LED status indicators (the number of indicators will depend on the number of
channels).
4Two connectors for the removable terminal blocks.
5An grounding screw.
6A slot for the power strip
7Two screw holes for panel mounting.
8A protective cover.
Connectors to be ordered separately:
bremovable screw or spring terminal blocks 170XTS00p00.
b1 to 3-row screw or spring bus bar 170XTS00p 01.
Presentation
Description
1
6
2
3
8
7
4
5
4
7
Characteristics :
pages 29 to 33
References :
pages 34 and 35
Dimensions :
page 35
Connections :
pages 36 and 37
29
Schneider Electric
Characteristics Modicon Momentum automation
platform 0
Analog I/O bases
Characteristics of analog input bases
Type of base units 170AAI03000
Number of inputs 1 x 8 differential inputs
LEDs Ready (green)
Format of data Full 16 bits signed (2's complement)
Protection Base and actuators Polarity inversion
Ranges ± 10 VDC ± 5 VDC 4…20 mA ± 20 mA 1…5 VDC
Input impedance kΩ> 0.1000 > 0.1000 250 250 > 0.1000
Error at 25 °C %0.27 0.21 0.27 0.32 0.13
Error at 60 °C %0.32 0.26 0.38 0.41 0.19
Resolution 14 bits + sign bipolar
15 bits unipolar
Conversion times ms 12 ms max. for 8 input channels
(1.33 ms per input channel + 1.33 ms)
Error indication None
Isolation Channel to channel VDC ± 200 for 1 minute
Field to ground VDC 500 for 1 minute
Communication adapter to
ground
VAC 500 for 1 minute
Common mode rejection Channel to ground 250 VAC @ 47 to 63 Hz or 100 VDC
Crosstalk between channels dB u 80
External power requirement Nominal VDC 24
Limit values VDC 20.4 to 28.8
Current mA < 382 @ 24 VDC
EMC for industrial
environment
Immunity IEC 1131 surge on auxiliary power supply 2 kV
Emissions EN 50081-2
Approvals UL, CSA, e
References :
pages 34 and 35
Dimensions :
page 35
Connections :
pages 36 and 37
30 Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Analog I/O bases
Characteristics of analog input bases (continued)
Type of base units 170AAI14000 170AAI52040
Number of inputs 1 x 16 single-ended input 1 x 4 differential inputs
Format of data Full 16 bits signed (2's complement)
Protection Base and actuators Polarity inversion
Error indication None
Ranges ± 10 V ± 5 V 4…20 mA ± 25 mV ± 100 mV
Input impedance kΩ> 2200 > 2200 < 0.250 > 10000 > 10000
Error at 25 °C 0.15 % FS 0.15 % FS 0.25 % FS ± 21 µV ± 27 µV
Error at 60 °C 0.25 % FS 0.25 % FS 0.45 % FS ± 46 µV ± 94 µV
Temperature drift (60 °C) ‰30 PE / °C 30 PE / °C 60 PE / °C –
PE (Full scale) 10 V 5 V 16 mA –
Resolution 12 bits + sign 12 bits + sign 12 bits 15 bits + sign
Filtering Low pass with cut-off frequency 10 kHz –
Current source Pt100 mA – – 0.125
Ni100 mA – – 0.125
Pt1000 mA –0.125 –
Ni1000 mA –0.125 –
Update time ms 1 + 1.5 x n
n = number of declared channels
500
Error indication None
Potential isolation Channel to channel VDC None 400
Base power supply and ground VDC 500 for 1 minute 500 for 1 minute
Channels to ground VAC 1780 for 1 minute 500 for 1 minute
Base power V± 30 (voltage or current output) ± 30 (voltage or current output)
Common mode
Channel to ground
V–± 100 DC, 250 AC
Common mode
Voltage between channels
V–200 DC, 115 AC single phase or 3-phase
or 250 AC single phase
Common mode rejection Channel to ground 250 VAC at 47 to 63 Hz or 100 VDC 135 dB DC, 145 dB AC 50 Hz, 155 dB AC
60 Hz
Between channels –120 dB DC, 130 dB AC 50 Hz, 140 dB AC
60 Hz
Serial mode rejection –35 dB AC 50 Hz, 45 dB AC 60 Hz
Input protection Polarity inversion
Operating voltage VDC 24
Internal current mA 305 @ 24 VDC
Power dissipation Typical W4.95 3.5
Maximum W5.55 5.5
Fusing Internal 2 A slow-blow 2 A slow-blow
External 500 mA fast-blow 500 mA fast-blow
Agency approvals UL, e, CSA, FM Class I, Div. II
References :
pages 34 and 35
Dimensions :
page 35
Connections :
pages 36 and 37
31
Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Analog I/O bases
Characteristics of analog output bases
Type of base units 170AAO12000 170AAO92100
Number of outputs 1 x 4
Format of data Full 16 bits signed (2's complement)
Protection Base and actuators Polarity inversion
Ranges ± 10 V 0…20 mA ± 10 V 4…20 mA
Load impedance kΩ1 minimum 0.6 maximum 1 minimum 0.6 maximum
Capacitive load µF < 1
Error at 25 °C %0.2 PE 0.3 PE 0.2 PE 0.4 PE
Error at 60 °C %0.25 PE 0.4 PE 0.25 PE 0.5 PE
Temperature drift (60 °C) ‰10 PE / °C 30 PE / °C 10 PE / °C 30 PE / °C
Resolution 12 bits + sign
Update time ms < 2
Full scale 10 V in the range of ± 10V
2 mA in the range of 0…20 mA
Fail State Hold, reset to zero, reset to full scale
Potential isolation Channel to channel None
Base power supply and ground VDC 500 for 1 minute
Channels to ground VAC 500 for 1 minute
Out protections Short-circuits in the voltage circuits, open in current polarity inversion
Base power V± 30 (voltage or current output)
Common mode rejection VAC 250 @ 47 to 63 Hz or 250 DC channel to ground
Operating voltage VDC 24
Internal current Base mA 530 @ 24 VDC
Actuators mA 150 @ 24 VDC
Power dissipation Typical W5.6
Maximum W8.5
Internal fusing A2, slow-blow
Agency approvals UL, e, CSA
References :
pages 34 and 35
Dimensions :
page 35
Connections :
pages 36 and 37
32 Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Analog I/O bases
Characteristics of discrete and analog I/O bases
Type of base unit 170AMM09000 170AMM09001
Number of inputs and outputs 1 x 4 differential inputs
1 x 4 discrete inputs
1 x 2 analog outputs
1 x 2 discrete outputs
Operating voltage VDC 24 12
Internal current mA 200 typical (at 24 VDC), 350 maximum
(at 24 VDC)
700 maximum (at 12 VDC)
Differential inputs for
170 AMM 090 00/090 01
Conversion time 10 ms for all channels
Conversion error ± 10 V ± 5 V 1 to 5 V ± 20 mA 4 to 20 mA
25 °C %0.08 0.16 0.16 0.16 0.16
60 °C %0.15 0.3 0.3 0.3 0.3
Resolution 14 bits 13 bits 12 bits 13 bits 12 bits
Conversion consistency %± 0.02 ± 0.04 ± 0.04 ± 0.04 ± 0.04
Common mode voltage Input voltage starting at Ag ± 11 V
Common mode suppression dB > 54 80
Over voltage
Voltage ranges
V± 30 solid state if voltage is 24 V
± 50 dynamic max. 100 ms
± 30 solid state if voltage is 12 V
± 50 dynamic max. 100 ms
Over voltage current ranges mA –> 48
Input resistance Ω1 M 250
Fail state Hold or reset to zero
Discrete inputs Voltage VDC 24 typical, 30 maximum 12 typical
Signal Type True high
On Voltage VDC + 11 to + 30 + 7.5 to + 15
Off Voltage VDC - 3 to + 5 - 1.5 to + 2.5
Input current mA 2.5 minimum at state 1 (6 mA at operating voltage), 1.2 maximum at state 0
Input resistance kΩ42.1
Response time ms 2.2 from 0 to state 1
3.3 from 1 to state 0
Analog outputs Resolution 12 bits for single-phase measuring range 0…20 mA, 12 bits for 2-phase measuring
range ± 10 V
Conversion time ms 1 for all channels
Conversion
error
25 °C max. ± 0.35 % of upper measuring range value
60 °C max. ± 0.70 % of upper measuring range value
Output load u 3 kΩ for voltage output, y 600
Ω
for current output
Discrete outputs Voltage VDC 24 typical, 30 maximum
Type Semiconductor
Signal Type True high
Current capacity 1 per channel, 2 per group, 2 per module
Leakage current mA < 1 @ 24 VDC < 1 @ 12 VDC
On State Voltage drop VDC < 0.5 @ 1 A < 0.5 @ 0.5 A
Response time Off to On ms < 0.1
On to Off ms < 0.1
Output protection The outputs are protected against overload and shorted-circuits
Output indicator 1 red LED per “On” output in the event of an overload or shorted-circuits
Error message Message “I/O error” on bus adapter if module is defective
Max. Switching cycles 1000/hr (inductive load 1 A), 100/s (resistive load 1 A), 8/s (filament load 2.4 W)
Potential isolation Discrete input and output None
Analog input to output None
Analog input and output and to
operating voltage
VAC 500 for 1 minute
Operating voltage and all inputs
and outputs from ground
VAC 500 for 1 minute
Power dissipation Typical W4.0
Maximum W6.0
Agency approvals UL, e, CSA, FM Class I, Div. II UL, e, CSA
References :
pages 34 and 35
Dimensions :
page 35
Connections :
pages 36 and 37
33
Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
Analog I/O bases
Characteristics of discrete and analog I/O bases (continued)
Type of base unit 170ANR12090 170ANR12091
Number of inputs and outputs 1 x 6 analog inputs
2 x 4 discrete inputs
1 x 4 analog outputs
1 x 8 discrete outputs
Operating voltage VDC 24, range 19.2 to 30
Internal current mA 400 @ 24 VDC
Analog inputs Resolution 14 bit
Input range VDC 0 to 10 - 10 to + 10
Input type Single-ended
Conversion time 0.75 ms maximum for 6 input channels
Conversion error 0.2 % @ 25 °C for 0 - 10 VDC inputs
Max input signal VDC 15 for voltage input
Max temperature drift VDC 10 inputs
Input resistance MΩ>1 for voltage inputs
Discrete inputs Voltage VDC 24
Configuration 2 groups of 4 inputs
Signal Type True high
Minimum on voltage VDC > 11
Maximum off voltage VDC < 5
Input current Minimum On mA 6
Maximum Off mA 2
Input voltage
Range VDC + 3 to + 32
Surge VDC 45 peak for 10 ms
Response time Off to On ms 1.2
On to Off ms 1.2
Analog outputs Resolution 14 bit
Output range VDC 0 to 10 - 10 to + 10
Conversion time ms 1.20 for all four channels
Conversion error max. + 0.4 % of upper measuring range value @ 25 °C
Output load > 2 kΩ minimum @ 0 to 10 VDC
Fail state Hold or reset to zero
Discrete outputs Voltage VDC 10-30 operating, 50 for 1 ms maximum
Type Solid State Switch
Signal type True high
Current capacity A0.25 per point, 2 per group, 2 per module
Leakage current mA 0.4 @ 30 VDC
Surge current A2.5 for 1 ms
On state voltage drop VDC < 0.4 @ 0.25 A current
Response time Off to On ms 1.2
On to Off ms 1.05
Output protection The Outputs are protected against overload and shorted-circuits
Output indicator 1 LED per point
Potential isolation Discrete input to output None
Analog input to output None
Analog input and output to
operating voltage
VAC 500 for 1 minute.
Operating voltage and
all inputs
and outputs from ground
VAC 500 for 1 minute
Power dissipation Typical W4.0
Maximum W6.0
Agency approvals UL, e, CSA
References :
pages 34 and 35
Dimensions :
page 35
Connections :
pages 36 and 37
34 Schneider Electric
References Modicon Momentum automation
platform 0
Analog I/O bases
Analog input bases
Type of inputs Number of
channels
Ranges Reference
Weight
kg
12 bits + sign 16 single-ended ± 5 V, ± 10 V, 4-20 mA 170AAI14000 0.215
15 bits + sign 4, differential Pt 100, Pt 1000, NI 100
thermocouples B, E, J, K,
N, R, S, T
170AAI52040 0.215
8, differential ± 5 V, ± 10 V, 1-5V
± 20 mA, 4-20 mA
170AAI03000 0.215
Analog output bases
Type of outputs Number of
channels
Ranges Reference
Weight
kg
12 bits + sign 4 ± 10 V, 0-20 mA 170AAO12000 0.215
± 10 V, 4-20 mA 170AAO92100 0.215
Discrete and analog I/O bases
Type Ranges Reference
Weight
kg
Inputs Outputs Inputs Outputs
4 differential analog
13 bits + sign
2 analogs
12 bits
± 5 V, ± 10 V
1-5 V
± 20 mA
4-20 mA
0-20 mA
± 10 V
170AMM09000 0.240
4 discrete 2 discrete
0.5 A
24 VDC 24 VDC
4 differential analog
13 bits + sign
2 analogs
12 bits
± 5 V, ± 10 V
1-5 V
± 20 mA
4-20 mA
0-20 mA
± 10 V
170AMM09001 0.240
4 discrete 2 discrete
0.5 A
12 VDC 12 VDC
6 analog
14 bits
4 analogs
14 bits
0-10 V 0-10 V 170ANR12090 0.240
2 x 4 discrete 1 x 8 discrete
0.25 A
24 VDC 24 VDC
6 analog
14 bits
4 analogs
14 bits
± 10 V ± 10 V 170ANR12091 0.240
2 x 4 discrete 1 x 8 discrete
0.25 A
24 VDC 24 VDC
170AAI
pp
0
p
0
170AAO
p
2
p
00
170AAM09000
Characteristics :
pages 29 to 33
Dimensions :
page 35
Connections :
pages 36 and 37
35
Schneider Electric
References (continued),
dimensions,
mounting
Modicon Momentum automation
platform 0
Analog I/O bases
170App
Rail or panel mounting
Accessories
Description Composition Type of
connection
Reference
Weight
kg
Terminal blocks Set of 3 connectors
1 row
Screw 170XTS00100 –
Spring 170XTS00200 –
Bus Bar 3 rows Screw 170XTS00401 –
Spring 170XTS00301 –
2 rows Screw 170XTS00501 –
Spring 170XTS00801 –
1 rows Screw 170XTS00601 –
Spring 170XTS00701 –
Cable Grounding
Rail
Used to connect the cable shielding CER001 –
High vibration
environment clips
Used to prewire the I/O base units.
Requires screw or spring connection
terminals
170BDM09000 –
Replacement parts
Description Use Reference
Weight
kg
Sheets of labels 10 front labels for Momentum modules 170XTS10000 –
Set of coding and
locating device
For screw or spring connection terminals 170XCP20000 –
Dimensions, mounting
170XTS00100
170XTS00200
170XTS00401
170XTS00501
170XTS00801
170XTS00601
CER001
(1)
107
125
93
141,5
47,5
62
≥ 125 ≥ 60
(1)
(1) 2 holes for M4 screws, for panel mounting. (1) Equipment or enclosure.
Characteristics :
pages 29 to 33
Connections :
pages 36 and 37
36 Schneider Electric
Connections Modicon Momentum automation
platform 0
Analog I/O bases
Connections of analog input bases and analog output bases
170AAI03000 170AAI14000
Example of external wiring of 2-wire sensor Example of external wiring of 2-wire sensor
Group of channels
Internal wiring
170AAI52040 170AAO120 / 92100
Example of external wiring of sensor Example of external wiring of 2-wire actuator
Group of channels Group of channels
Internal wiring Internal wiring
2
1
3
M-
InU8InU6InU5InU4InU2InU1 InU3 InU7
InI8InI6InI5InI4InI2InI1 InI3 InI7
Agnd8Agnd6Agnd5Agnd4Agnd2Agnd1 Agnd3 Agnd7
InI8InI6InI5InI4InI2InI1 InI3 InI7
L+
17161514121110 13987643251 18
171615141211
+
10 13987643251 18
+
+
–––
U I
Return
Voltage input Current input
+ 24
VDC
+ 24 VDC
+
–U
+
–I
2
3
Inl1+
Inl2+
Inl3+
Inl4+
Inl5+
Inl6+
Inl7+
Inl8+
Inl9+
Inl10+
Inl11+
Inl12+
Inl13+
Inl14+
Inl15+
Inl16+
1
AGND
M
–
L
+
InU1+
InU2+
InU3+
InU4+
InU5+
InU6+
InU7+
InU8+
InU9+
InU10+
InU11+
InU12+
InU13+
InU14+
InU15+
InU16+
24 V
500 mA
fast-blow
fuse
Return
L+M–
+–
U
+–
U
+
–U
2
3
L+M–
IS1+
RTD1+
RTD1
–
IS1
–
IS2+
RTD2+
RTD2
–
IS2
–
IS3+
RTD3+
RTD3
–
IS3
–
IS4+
RTD4+
RTD4
–
IS4
–
InU1+
InU1
–
InU2+
InU2
–
InU3+
InU3
–
InU4+
InU4
–
24 V
1
Return
500 mA
fast-blow
fuse
OutI1– 1L+1
1M–1
1M–1
1L+2
1M–2
1M–2
1L+3
1M–3
1M–3
1L+4
1M–4
1M–4
OutI1+
OutU1+
OutI2–
OutI2+
OutU2+
OutI3–
OutI3+
OutU3+
OutI4–
OutI4+
OutU4+
L+M-
+
–+– +
–
2
3
L+M-
24 V
1
630 mA
fast-blow
fuse
Return
250 mA
fast-blow
fuse
Fuse 1
(2 A slow-blow)
Fuse 2
(2 A slow-blow)
37
Schneider Electric
Connections Modicon Momentum automation
platform 0
Analog I/O bases
Connections of discrete and analog bases
170AMM09000 / AMM09001
Example of external wiring of 2-wire sensor Example of external wiring of 2-wire actuator
External bridge
Group of channels Group of channels
Internal wiring Internal wiring
170AMM09000 / AMM09001 (continued) 170ANR12090 / 91
Example of external wiring of digital sensor/actuator Example of mixed discrete and analog I/O sensor/actuator field wiring
Group of channels
Internal wiring
(1)
c
24 V for 170 AMM 090 00,
c
12 V for 170 AMM 090 01
(2) Depending on application, max 5 A.
UI1–
I1+
UI2–
I2+
UI3–
I3+
UI4–
I4+
AGND
AGND
AGND
AGND
O1
O2
M–
M–
1L+M–
+
–U
+
–I
2
3
U1+
IS1
U2+
IS2
U3+
IS3
U4+
IS4
QV1
QI1
QV2
QI2
I1
I2
I3
I4
L+M–
(1)
1
(1)
325 mA
fast-
blow
fuse
Return
5 A
fast-
blow
fuse
UI1–
I1+
UI2–
I2+
UI3–
I3+
UI4–
I4+
AGND
AGND
AGND
AGND
O1
O2
M–
M–
1L+M–
+–
U
+–
I
2
3
U1+
IS1
U2+
IS2
U3+
IS3
U4+
IS4
QV1
QI1
QV2
QI2
I1
I2
I3
I4
L+M–
1
(1)
(1)
325 mA
fast-
blow
fuse
Return
5 A
fast-
blow
fuse
2-wire
actuator
2-wire
actuator
UI1–
I1+
UI2–
I2+
UI3–
I3+
UI4–
I4+
AGND
AGND
AGND
AGND
O1
O2
M–
M–
1L+M–
M–
PE
1M –
1L+
IN +–PE Out –PE
2
3
U1+
IS1
U2+
IS2
U3+
IS3
U4+
IS4
QV1
QI1
QV2
QI2
I1
I2
I3
I4
L+M–
1
(1)
(1)
3-wire actuator4-wire sensor
325 mA
fast-
blow
fuse
5 A
fast-
blow
fuse
1 A
fast-
blow
fuse
Return 2
3
M-AI6AI5AI4AI3AI2AI1I8I7I6I5I4I3I2I1 L+
17161514121110 13987643251 18
1M-A04A03A02A010807060504030201 1L+
171615141211
++
10 13987643251 18
1
Discrete input Nr.1
Discrete output Nr.5 Analog input Nr.1 Analog output Nr.4
- Return
- Return
Fuse (2)
+ 24 VDC
+ 24 VDC
+ 24 VDC
DGnd AGnd
- Return
Fuse (2)
Fuse (2)
38 Schneider Electric
Selection guide Modicon Momentum automation
platform 0
Specialty module I/O bases
Product type High-speed counter
Operating voltage 24 VDC
Unique features 2 independent, high-speed (10 kHz-200 kHz) counters
Modularity Input channels 6 (3 per counter) True High Inputs
Output channels 4 (2 per counter) True High Outputs
Input characteristics Counter inputs 5 VDC differential input, 200 kHz counter; 24 VDC single-end input, 10 kHz counter
Discrete inputs 6 (2 x 3) 24 VDC inputs:
- voltage range, - 3 to + 30 VDC
- response time, 3 ms Off to On or On to Off
Output characteristics Counter outputs Two 5 VDC differential outputs min 20 mA @ 24 VDC
Discrete outputs 4 (2 per counter) 24 VDC outputs:
- on current, 0.5 A per point, 1 A per counter
- response time: < 0.1 ms Off to On, < 0.1 ms On to Off
Protection
Surge Input voltage 45 V peak for 10 ms
Output current 5 A for 1 ms
Type of module 170AEC92000
Pages 41
39
Schneider Electric
0
I/O with Modbus Master Base
120 VAC
RS 485 2- or 4-wire Modbus port
6 True High Inputs
3 True High Outputs
–
1 group of 6 inputs (120 VAC @47 to 63 Hz):
- voltage range, 0 to 132 VAC
- response time, < 12.3 ms @ 60 Hz On to Off,
< 12.5 ms @ 60 Hz Off to On
–
3 solid state switching outputs (120 VAC @47 to 63 Hz):
- on current, 0.5 A continuous per point, 1.5 A continuous per module
- response time: < 12.3 ms @ 60 Hz On to Off, < 12.5 ms @ 60 Hz Off to On
170ADM54080
41
40 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
Specialty module I/O bases
The Momentum specialty module I/O bases provide support for unique applications
that broaden the range of the Momentum offering. The specialty modules are:
ba 2-channel, High-speed counter module base - 170AEC92000.
ba 120 VAC, 6-point input/3-point output module base with a Modbus
communication port - 170ADM54080.
The 170AEC92000 high-speed counter module base features 2 independent
counters, along with 6 discrete inputs and 4 discrete outputs.This base can connect
directly to either 5 VDC differential or 24 VDC single-ended encoders. The base
supports two operating modes:
bIncremental (up counter, down counter, and quadrature)
bAbsolute (SSI up/down counter).
The high-speed counter module can be connected directly to many standard
communication networks, for communicating with programmable controllers,
industrial computers, and other controllers, by installing one of the snap-on
Momentum communication adapters onto the base.
The 170ADM54080 input/output module base has 6 discrete inputs and 3 discrete
outputs for direct connection to 2- and 3-wire sensors and actuators, plus a Modbus
communication port for connection to serial devices.
This module can also be used as the I/O base for a programmable controller, in either
a standalone or distributed I/O configuration, by installing one of the snap-on
Momentum M1 processor adapters.
A specialty module I/O bases consists of the following components:
1Internal interface connector for the communication module.
2Locking and earth contact for the adapter.
3LED status display.
4Two connectors for the removable terminal blocks.
5Grounding screw.
6Grounding busbar mounting slot.
7Mounting holes for a panel mount.
8Protective cover for fuses (170ADM54080) or connector for the removable
terminal block.
Presentation
High-speed counter
Input/Output module with Modbus communication port
Description
Characteristics:
page 41
References:
page 42
Connections:
page 43
41
Schneider Electric
Characteristics Modicon Momentum automation
platform 0
Specialty module I/O bases
Characteristics
Model No. 170AEC92000 170ADM54080
Number of I/O Counter 2 independent –
Inputs 2 x 3 discrete 1 x 6 discrete
Outputs 2 x 2 discrete 1 x 3 discrete
Discrete inputs
Operating voltage V24 DC 120 AC @ 47 to 63 Hz
Input Range V- 3 to + 30 DC 0 to 132 AC
Surge V45 peak for 10 ms 200 AC for 1 cycle
Input current On mA 2.5 minimum 5.5 minimum
Off mA 1.2 maximum 1.9 maximum
Switching level V 11 DC minimum on voltage
5 DC maximum off voltage
79 AC minimum on voltage
20 AC maximum off voltage
Response time Off to on ms 3 < 12.5 @ 60 Hz
On to off ms 3 < 12.3 @ 60 Hz
Signal type True High
Discrete outputs Operating voltage V24 DC 120 AC @ 47 to 63 Hz
Signal type True High
On state voltage drop V< 0.5 DC @ 0.5 A current < 1.5 AC @ 0.5 A current
Fault sensing Overload and short circuit 1 fuse, 2.5 A @ 250 VAC
Current capacity A0.5 per point 0.5 continuous per point
A1 per counter –
A2 per module 1.5 continuous per module
Current Leakage mA < 1 @ 24 VDC 1.9 @ 120 VAC
Surge mA 5 A for 1 ms 30 minimum
Response time Off to on ms < 0.1 < 12.5 @ 60 Hz
On to off ms < 0.1 < 12.3 @ 60 Hz
Counter inputs Incremental counters Up counter, down counter, quadrature –
Absolute SSI counter Up/down counter with 4 sub-modes –
Input signals VDC 5 differential input
24 single-ended input
–
–
Counter speed (max) kHz 200, differential inputs
10, single-ended inputs
–
–
Counter capacity 24 bits plus sign per counter –
Counter configuration Via communication adapter (8 input
words, 8 output words)
–
Modbus port Type –RS-485, 2- or 4-wire
Communication rates bit/s –19200 and 9600
Format –8-bit RTU / 7-bit ASCII
Modbus address range –0 to 247
Time-out ms –150 after transmission
Current consumption mA 280 125 @ 120 VAC
Agency approvals UL, e, CSA
References:
page 42
Connections:
page 43
42 Schneider Electric
References Modicon Momentum automation
platform 0
Specialty module I/O bases
References
Modules
Description Characteristics Reference Weight
kg
High-speed counter
Module Base
2 independent counters 170AEC92000 0.210
I/O module base with
Modbus communication
port
RS 485 Modbus port
6 inputs, 3 outputs
170ADM54080 0.240
Replacement parts
Description Use Reference Weight
kg
Sheets of labels 10 front labels for
Momentum modules
170XTS10000 –
Documentation
Description Use Reference Weight
kg
Momentum I/O bases User guide for:
170AEC92000
870USE00800 –
170ADM 4080 870USE00200 –
Accessories: Terminal blocks, bus bar, cable grounding rail and discrete input simulator, see
page 19.
170AEC92000
170ADM54080
Characteristics:
page 41
Connections:
page 43
43
Schneider Electric
Connections Modicon Momentum automation
platform 0
Specialty module I/O bases
Connections
170AEC92000
A 2-encoder and input/output field wiring example
170ADM54080
A Modbus device and input/output field wiring example
2
1
3
17161514121110 13987643251 18
M-I6I5I4I2I1 I302+Z2+B2+A2+01+Z1+B1+A1+ L+
1M-Q+Q3Q21L+1L+ Q102-Z2-B2-A2-01-Z1-B1-A1- 1L+
17161514121110 13987643251 18
ZM-1M-ZL+ZM- 1M-Z2*B2*A2*ZM-Z1* ZL+B1*A1* ZL+
17161514121110 13987643251 18
Encoder with
differential input
Encoder with
single ended
input
Discrete
output
Number 1
Discrete
input
Number 6
Counter 1 Counter 2 Counter control
inputs
Counter control
outputs
Fuse
Fuse
Fuse
+ 24 VDC Power for module
- Return for module
+ 24 VDC Power for inputs and outputs
- Return for inputs and outputs
+ 5 to 30 VDC power for encoders
- Return for encoders
PE
IN +PELN PE
GND
Tx Lo
Tx Hi
1L11N
1
2
3
Tx Lo
Tx Hi
Rx Lo
Rx Hi
GND N2N2N2N2NI6I5I4I3I2
Q3Q2
I1
Q1
L1
3-wire actuators 3-wire sensorsModbus Device
RS485
Return
a 120 V
Return
a 120 V
Return
a 120 V
2 A
slow-blow
fuse
Fuse 1 Option
200 mA
slow-blow
fuse
Characteristics:
pages 41
References:
page 42
44 Schneider Electric
Selection guide Modicon Momentum automation
platform 0
Communication adapters
Applications Communication adapters for Ethernet TCP/IP
Bus and network type Ethernet TCP/IP
Transparent Ready Class
A10 B20
Topology Physical interface IEEE 802.3 standard
Method of access CSMA-CD
Bit rate 10 M bit/s 10/100 Mbit/s
Medium Type Twisted pair CAT5
Topology Star
Redundancy No
Maximum number of devices 64
Maximum length 1000 m per segment
Type of communicating module 170ENT11002 170ENT11001
Pages 49
45
Schneider Electric
0
Communication adapters for INTERBUS Communication adapter
for Profibus DP bus
Communication adapter
for DeviceNet network
INTERBUS INTERBUS I/O bus Profibus DP DeviceNet
SUPI 3 SUPI 2
DIN 19 258 standard EN 50170 standard –
Master/Slave Master/Slave CSMA-CD
500 K bit/s 12 Mbit/s…9.6 K bit/s
depending on length
500 Kbit/s
Twisted pair Fiber optic Twisted pair Twisted pair Multidrop
Ring Multidrop, ring Multidrop
No No No
40 per installation remote bus module (up to 254 bus terminal modules) 32 without repeater
126 with repeaters
64
12800 m 1200 m 500 m with repeaters
170INT11003 170INT12000 170INT11000 170DNT11000 170LNT71000
57 59 61
46 Schneider Electric
Selection guide (continued) Modicon Momentum automation
platform 0
Communication adapters
Applications Communication adapters for Modbus Plus network
IEC Data Format 984 Data Format
Bus and network type Modbus Plus
Topology Physical interface Modbus Plus
Method of access Token bus
Bit rate 1Mbit/s
Medium Type Twisted pair
Topology Multidrop
Redundancy No Yes No
Maximum number of
devices
Per segment 32
Overall 64 (without repeaters)
Maximum length 5 000 m with repeaters
Type of communicating module 170PNT11020 170PNT16020 170NEF11021
Pages 51
47
Schneider Electric
0
Communication adapters for Modbus Plus network
984 Data Format
Communication adapters for Fipio bus
for TSX Series 7 and April 5000 for Premium PLCs
Fipio
Modbus Plus Fip standard
Token bus Bus managed by bus arbitrator
1Mbit/s 1 Mbit/s
Twisted pair
Multidrop
Yes No
32
64 (without repeaters) 128
5 000 m with repeater 15 000 m with repeaters
170NEF16021 170FNT11000 170FNT11001
51 55
48 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
Ethernet TCP/IP communication adapters
The Model 170ENT11002 and 170ENT11001 Ethernet communication adapters for
the Momentum I/O product line provide a direct connection to Ethernet-based
networks for the entire family of Momentum I/O modules. This connectivity enables
communications with a full range of Ethernet TCP/IP compatible control products that
includes programmable controllers, industrial computers, motion controllers,
operator control stations, host computers, and other controls. This communication
network provides a flexible, cost-effective solution for communicating factory floor
information to various layers of an integrated manufacturing facility.
The 100BASE-TX Ethernet communication adapter, the 170ENT11001 (and the
10BASE-T adapter, the 170ENT11002) are single adapters designed to plug on to
any of the Momentum Input/Output module bases, and conform to the requirements
of the Ethernet communication network.
The Ethernet IP addressing scheme allows an unlimited number of Momentum I/O
modules or connections on the network. Using standard Ethernet hubs, routers, and
bridges, the performance and distance capability of the Ethernet network can be
tailored to meet the requirements of almost any control application.
The Ethernet communication adapter uses the standard Modbus message structure
and control commands over the TCP/IP protocol, which simplifies implementation by
control engineers while providing information that can be communicated over
standard network media to all enterprise applications.
Since Modbus on TCP/IP over Ethernet is supported by Schneider Electric's
Quantum and Premium controller families, Momentum I/O can be added to existing
control systems where additional I/O capacity of a distributed I/O sub-network is
needed.
The Ethernet communication adapter requires connection to a BOOTP server for
setting the module's IP parameters, including its own unique IP address, default
gateway, and sub-net mask, all of which is stored in the communication adapter's
flash memory. Schneider Electric's automation business offers BOOTP Lite Ethernet
software as a free download from the Telemecanique Internet web site
www.telemecanique.com.
The 170ENT1100p Ethernet communication adapters comprises on the front panel:
1Ethernet RJ45 connector for 100BASE-TX interface for 170ENT11001) or
10BASE-T interface for 170ENT11002).
2Area for Label (label shipped with I/O base).
3LED Status Indicators comprising for the 170ENT11002:
- Run (green), module health,
- LAN Active (green), Ethernet network status.
LED Status Indicators comprising for the 170ENT11001:
- Run (green), module health,
- 10T (green), 10 M bit/s network activity,
- 100T (amber), 100 M bit/s network activity,
- ST (green), Ethernet network status.
Presentation
Description
3
2
1
49
Schneider Electric
Characteristics,
references
Modicon Momentum automation
platform 0
Ethernet TCP/IP communication adapters
(1) Transparent Ready Class A10 and B20, for more details, consult our catalog “Transparent
Ready, Ethernet TCP/IP and Web technologies”
Characteristics
Model No 170ENT11002 170ENT11001
Communication network Ethernet TCP/IP
Media Shielded twisted pair cable
Communication rate M bit/s 10 10/100
Distance m (ft.) 100 (328) per segment
Connectors RJ45, 10BASE-T RJ45, 100BASE-TX
Transparent Ready services Class A10 B20
Standard Web server –“Rack Viewer” access to the product
description and status and to base unit
diagnostics
“Data editor” access to the configuration
functions and variables
Standard Ethernet TCP/IP
communication services
Modbus Messaging (read/write data words)
–FDR client for automatic assignment of
the IP address and network parameters
SNMP agent, detection of the product by
an SNMP manager
Adapter configuration BOOTP server to assign IP parameters
Flash memory 128 K for IP parameter storage
Error checking CRC-32 error check
Error and fail states Fail safe
Addressing Unique IEEE global address, IP address user assigned
Mode of operation Master slave, peer-to-peer
Topology Multi-drop bus, star
Packaging Standard momentum communications adapter enclosure - IP 20 environment
Indicator lights Run and activity lights Run, 10 M bit/s, 100 M bit/s, and status lights
Power source Power supply on-board the I/O base
Hot swapping of modules Yes
Agency approvals UL, e, CSA, FM Class I, Div. II UL, e, CSA
References
Communication adapters
Description Communication rate
Transparent Ready Class
(1)
Reference Weight
kg
Ethernet TCP/IP
communication adapters
10 M bit/s
A10
170ENT11002 0.070
10/100 M bit/s
B20
170ENT11001 0.070
Accessories
ConneXium cabling system See page 78 –
BOOTP Lite Ethernet Software Download from
www.telemecanique.com
Ethernet TCP/IP
communication adapter user guide
See page 97 –
105139
170ENT11002
50 Schneider Electric
Presentation Modicon Momentum automation
platform 0
Modbus Plus communication adapters
Modbus Plus communication adapters for the Momentum I/O product line can be
plugged into any Momentum I/O base to create a functional I/O unit on the Modbus
Plus bus, and to provide a direct connection to the Modbus Plus Network for the full
family of Momentum I/O modules. This connectivity enables communications with all
of the Modbus Plus compatible control products - including programmable
controllers, industrial computers, operator control stations, drive systems, and other
controls - to provide a flexible, cost-effective solution for distributing I/O modules
throughout a large area. To expand the capabilities of the Modbus Plus Network for
distributed I/O applications, the communication adapters have been designed to
permit up to 64 Momentum I/O modules to be connected to the network without the
need for signal repeaters.
Each Momentum I/O module is an individual node on the Modbus Plus network with its
address user-selected on the dual rotary switch on the front of the communication
adapter. The Momentum I/O modules can be configured for the network, and
assigned program reference numbers, by using either the Peer Cop function or the
MSTR function block instruction in the programmable controller or the Modbus Plus
configuration in an industrial computer.
There are four types of communication adapters available:
b170PNT11020, Single Port, IEC Data Format
b170PNT16020, Redundant Port, IEC Data Format
b170NEF11021, Single Port, 984 Data Format
b170NEF16021, Redundant Port, 984 Data Format.
This version of the Momentum Modbus Plus communication adapter communicates
I/O data to the programmable controller in the IEC data format, which has bit
numbering 0 through 15, right to left, within the data word (i.e., input or output number
1 is bit number 0).
This version of the Momentum Modbus Plus communication adapter communicates
I/O data to the programmable controller in the traditional 984 data format, which has
bit numbering 1 through 16, left to right, within the register (i.e., input or output number
1 is bit number 1).
Since Modbus Plus is supported by the Quantum and 984 controller families,
Momentum I/O can be added to existing control systems where additional I/O
capacity or a distributed I/O sub-network is needed, because of requirements for the
control system. See page 52 for typical control systems using Momentum I/O modules
on the Modbus Plus network with programmable controllers and industrial computer
systems.
Presentation
IEC Data Format
984 Data Format
Char acte ris tics:
page 51
Référence:
page 53
51
Schneider Electric
Description,
characteristics
Modicon Momentum automation
platform 0
Modbus Plus communication adapters
Description
Each 170 PNT/NEF communication module comprises:
1Three indicator lights (LEDs):
- MB + ACT indicator light (green): module powered up or communicating.
- ERR A indicator light (red): communication error network A.
- ERR B indicator light (red): communication error network B.
(for redundant model).
2A 9-way male SUB-D connector for connecting to the Modbus Plus network.
3A 9-way male SUB-D connector for a redundant Modbus Plus network.
4A slot for an identification label (supplied with all I/O sub-bases).
5Two switches for coding the slave address on the bus.
Characteristics
Type of module 170PNT11020 170PNT16020 170NEF11021 170NEF16021
Communication network Modbus Plus
Master PLC on the network Quantum, Premium Quantum Quantum, Compact 984
Structure Type Industrial
Redundancy No Yes No Yes
Topology Multi-drop, devices connected using extension cable or tap-off cable
Length 5,000 m (6000 ft.) maximum with repeaters
Access method Token bus
Transmission Bit rate 1 M bit/s
Medium Twisted pairs
Data Format IEC Data Format 984 Data Format
Number of Momentum devices Per segment 31 connection points
Maximum 63 for all segments
Power source Power supply on-board the I/O base
Behavior in the event of a communication error Discrete I/O: forcing to state 0
Analogue I/O: configurable (maintain value, fallback to 0 or full scale value)
Services Configuration: Peer cop and MSTR function block, “peer-to-peer” mode
Agency approvals UL, e, CSA, FM Class I, Div. II UL, e, CSA
31 2
45
Référence:
page 53
52 Schneider Electric
Cabling system Modicon Momentum automation
platform 0
Modbus Plus communication adapters
1140CRA21110: Quantum Modbus Plus drop interface and power supply, single-
cable support, 115/230 VAC.
2140NOM21200: Quantum Modbus Plus head-end interface, redundant support,
twisted pair cable.
3140NOM25200: Quantum Modbus Plus Head-end Interface, single-cable
support, fiber optic cable.
4170PNT11020 or 170NEF11021: Momentum Modbus Plus communication
adapter, non-redundant network.
5170PNT16020 or 170NEF16021: Momentum Modbus Plus communication
adapter, redundant network.
6416NHM21233: Modbus Plus type III PCMCIA Card, single port;
Or 416NHM21234: Modbus Plus type III PCMCIA Card, single port, “plug and
play”.
7990NAD23000: Modbus Plus tap, IP 20.
8990NAD23010: Modbus Plus tap, IP 65.
9990NAD21110 / 30: Modbus Plus drop cable (lengths: 2 or 4 or 6 m).
10 990NAD21510: Modbus Plus ruggedized tap programming Cable, 3.05 m.
11 170MCI 020 / 021pp: Modbus Plus RJ45 cable (lengths: 0.25, 1, 3 or 10 m).
12 170XTS02000: Modbus Plus “T” connector (DB9 base).
13 490NAA2710p: Sandard Modbus cable (lengths: 30, 150, 300, 450 or 1500 m).
14 990NAD23011: Modbus Plus ruggedized tap terminators.
15 170XTS02100: Modbus Plus RJ45 terminator.
16 416NHM30032: Modbus Plus PCI PC adapter Card, dual ports.
Network topology
Momentum I/O modules in a distributed control system
Momentum I/O modules with Modbus Plus double cable in a distributed and
redundant control system
2
14
55 9
16
9
7
1
3
8
Characteristics:
page 51
References:
page 53
19
6
10
8
DIO
11
12
4
15
7 13
53
Schneider Electric
References Modicon Momentum automation
platform 0
Modbus Plus communication adapters
(1) Item, see page 52.
References
Description Connection Item
(1)
Bus master
PLC
Reference
Weight
kg
Communication adapters
for Momentum I/O sub-
bases
Non-redundant Modbus Plus network 4Premium,
Quantum
170PNT11020 –
Compact 984 170NEF11021 –
Redundant Modbus Plus network 5Quantum 170PNT16020 –
Compact 984 170NEF16021 –
Description Use Mounting
on
Item
(1)
Reference
Weight
kg
Modbus Plus taps IP 20 junction box
for tap-off connection “T”
–7990NAD23000 0.230
IP 20 junction box
for tap-off connection “T”,
connection of cable on screw terminal
block with one RJ45 connector in front
DIN profile – 990NAD23020 –
Panel – 990NAD23021 –
Modbus Plus Tap (IP 20),
standard Modbus cable
with one RJ45 connector in front
Panel 8990NAD23010 0.650
IP 20 “T” with 2 RJ45 connectors for
Modbus cable and one 9-way SUB-D
connector for tap link devices
–12 170XTS02000 0.260
Terminator connector kit
(set of 2)
2 impedance adaptors for box (IP 20)
990 NAD 230 20/21
–1990NAD23022 –
2 impedance adaptors for box (IP 20)
990 NAD 230 10
–14 990NAD23011 –
2 impedance adaptors for tee (IP 20)
170 XTS 020 00
–15 170XTS02100 –
Connection cables
Description Use Item
(1)
Length Reference
Weight
kg
From To
Standard Modbus Plus
cables
T-junction box
990 NAD 230 00,
990 NAD 230 11
T-junction box
990 NAD 230 00,
990 NAD 230 11
13 30 m 490NAA27101 –
150 m 490NAA27102 –
300 m 490NAA27103 –
450 m 490NAA27104 –
1500 m 490NAA27106 –
Modbus Plus cable for
RJ45
“T” 170 XTS 020 00 “T” 170 XTS 020 00 11 0.25 m 170MCI02110 –
1 m 170MCI02136 –
3 m 170MCI02120 –
10 m 170MCI02180 –
Modbus Plus Drop cables Communication
modules
for Momentum I/O
sub-bases
170 PNT/NEF
T- junction box
990 NAD 230 00/10
92.4 m 990NAD21110 –
6 m 990NAD21130 –
Description Use Length Reference
Weight
kg
From junction box To equipment, cable outlet
of 9-way SUB-D type connectors
Modbus Plus Drop Cable Flying leads Left side 2.4 m 990NAD21810 –
6 m 990NAD21830 –
Right side 2.4 m 990NAD21910 –
6 m 990NAD21930 –
Connecting accessories
Description Use for Reference
Weight
kg
RJ45 Crimp tool Crimping the RJ connectors 490NAB00010 –
9-way female SUB-D
connector
Communication module connection ASMBKT085 –
Wiring tool Fitting trunk cables and drop cables in local site tap 043509383 –
Other connection accessories See page 77
170PNT11020 / NEF11021
170PNT16020 / NEF16021
ASMBKT085
Characteristics:
page 51
54 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
Fipio communication adapters
The Fipio communication adapter can be plugged into a Momentum I/O base to
create a functional I/O unit on the Fipio bus, and to provide a direct connection to the
Fipio Network for the full family of Momentum I/O modules. This connectivity enables
the Momentum I/O to be used along with other Fipio compatible control devices,
including industrial computers, operator control stations, drive systems, and other
controls, to provide a flexible, time-critical, cost-effective solution for distributing I/O
modules throughout a large area.
There are two types of communication adapters available:
b170FNT11001 (1) for a Fipio bus connected to a Premium PLC.
b170FNT11000 for a Fipio bus connected to TSX 7 series CPUs or APRIL 5030 and
5130 CPUs.
Each Momentum I/O module is an individual node or device on the Fipio network with
its address set by the user on the dual rotary switch on the front of the communication
adapter. Fipio is a network that can have up to 128 slave devices. The Fipio network's
distance and communication capabilities range from 1000 meters (3330 ft.) to 15000
meters (45000 ft.) with repeaters over twisted pair cable at a data rate of 1 M bit/s.
(1) The Fipio communication adapter 170FNT11001 does not support the 170ADM54080 I/O base.
The 170FNT1100p communication module comprises:
1Three indicator lights (LEDs):
- Ready indicator light (green): module powered up or in service.
- COM indicator light (yellow): data being sent or received.
- ERR indicator light (red): faulty device.
2A 9-way male SUB-D connector for connecting to the Fipio bus
3A slot for an identification label (supplied with all I/O sub-bases).
4Two switches for coding the slave address on the bus.
Presentation
Momentum I/O
modules
Third-party productsMomentum I/O modules
Premium
Bus Fipio
Magelis
Description
4 3
21
55
Schneider Electric
Characteristics,
references
Modicon Momentum automation
platform 0
Fipio communication adapters
Characteristics
Type of module 170FNT11001 170FNT11000
Communication bus Fipio
Bus manager PLC Premium TSX Series 7, model 40 or April 5000
Structure Type Open industrial, conforming to the WorldFip standard
Topology Devices connected using extension cable or tap-off cable
Length meters 1,000 to 5,000 depending on the medium used
Access method Producer/consumer principle, managed by a bus arbiter
Transmission Bit rate 1 M bit/s
Media Shielded twisted pair cable 150 Ω. Fibre optic 62.5/125 or 50/125 with electrical/optical
repeaters
Number of Momentum devices Per segment 31 connection points (without repeater)
Maximum 97 on all segments 61 on all segments
Behavior in the event of a communication error Discrete I/O: forcing to state 0
Analogue I/O: configurable (maintain value, fallback to 0 or full scale value)
Other characteristics, consult our catalog Premium automation platform
Agency approvals UL, e, CSA
References
Description Connection Bus manager PLC Reference Weight
kg
Communication
adapters for
Momentum
I/O sub-bases
Fipio field-bus on
Momentum I/O
sub-bases
Premium 170FNT11001 (1) 0.110
TSX Series 7,
Model 40,
April 5000
170FNT11000 0.110
Description Connection Bus manager PLC Reference Weight
kg
Female connectors
(9-way SUB-D)
On 170 FNT 110 0p
communication
module
Black poly carbonate
IP 20
TSXFPACC12 0.040
Zamac TSXFPACC2 0.080
Bus connection
boxes
Main tap-off cable Black poly carbonate
IP 20
TSXFPACC14 0.120
Zamac IP 65 TSXFPACC4 0.660
Tap-link cables 8 mm, 2 shielded
twisted pair 150 Ω
100 m TSXFPCC100 5.680
200 m TSXFPCC200 10.920
500 m TSXFPCC500 30.000
Other connection accessories Consult our catalog
“Premium
automation platform”
–
Fipio Communication Adapter
User Guide
See page 97 –
(1) Does not support the 170ADM54080 I/O base.
170FNT11001 / 00
TSXFPACC12
TSXFPACC14
TSXFPACC4
56 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
INTERBUS communication adapters
The Momentum INTERBUS communication adapter provides a direct connection to
the INTERBUS Network for the full family of Momentum I/O modules. This connectivity
enables Momentum I/O to be used in open architecture control systems that utilize
either a programmable controller or industrial computer as the network master. In
these applications, INTERBUS serves as the communication network that connects
Momentum I/O modules, along with other INTERBUS compatible control devices, for
the communication of input and output information with a single master controller.
There are three types of INTERBUS adapters available:
b170INT11000, twisted pair media, SUPI 2.
b170INT11003, twisted pair media, SUPI 3, supports G4 diagnostic.
b170INT12000, fiber optic media, SUPI 3, supports G4 diagnostic.
The INTERBUS communication adapter is designed to plug on to any of the
Momentum Input/Output module bases, thus allowing the I/O module to be accessed
over the INTERBUS Communication Network. Each Momentum I/O module is an
individual node or device on the INTERBUS network with its address set either by its
physical location on the network, or by menu-driven software that is available with
some INTERBUS master devices. INTERBUS is a cost-effective method of distributing
I/O modules throughout large plant areas. The figure below illustrates a typical
control system using Momentum I/O modules on the INTERBUS network, with a
Quantum PLC programmable controller as the network master.
The 170INT1100p INTERBUS communication adapters comprise on the front panel:
1Two 9-Pin SUB-D connectors for connection to the INTERBUS bus.
2Area for Label (label shipped with I/O base).
3LED Status Indicators comprising for 170INT11000 / 11003 only:
- UL (green), logic power check, for 170INT11003 only.
- BA (green), bus enabled.
- RC (green), remote bus check.
- RD (yellow), remote bus disabled.
Presentation
Network Topology
123456789101112 13 14 15 16 12345678910111213 14 15 16 123456789101112 13 14 15 16
CPS 114 20
140
Xxxx Ixxx
CPU 343 00
140
Xxxx Ixxx
xxx xxx 00
140
Xxxx Ixxx
DDO 334 00
140
Xxxx Ixxx
xxx xxx 00
140
Xxxx Ixxx
xxx xxx 00
140
Xxxx Ixxx
123456789101112 13 14 15 16
123456789101112 13 14 15 16 123456789101112 13 14 15 16
Quantum PLC with
140NOA62200
INTERBUS module
Momentum I/O Modules
Third
Party
Products
Remote Bus Extension
Remote Bus Extension
Branch
INTERface
Momentum I/O Modules
Remote Bus Remote Bus Remote BusRemote Bus
Remote Bus
Momentum I/O Modules
Description
1
3 2
57
Schneider Electric
Characteristics,
references
Modicon Momentum automation
platform 0
INTERBus communication adapters
Characteristics
Model No. 170INT11000 170INT11003 170INT12000
Communication network INTERBUS, I/O BUS INTERBUS
Communication rate K bit/s 500
Number of nodes (devices) Up to 254 devices
Media Twisted Pair Fiber Optic
Distance m (ft.) Up to 12 800 (41 984 ft.), 400 (1312 ft.) between two nodes
Connectors 2-9 Pin “D” connectors
Error checking CRC-16 error check
Error and fail states Fail safe
Addressing Physical location or software
Mode of operation Master-Slave, continuous shift register
Topology Ring
INTERBUS generation SUPI 2 SUPI 3
Packaging Standard Momentum communication adapter enclosure - IP 20 environment
Indicator lights Diagnostic and status light standard
Power source Power supply on board the I/O base
Agency approvals UL, e, CSA, FM Class I, Div. II UL, e, CSA
References
Modules
Description Media Generation Reference Weight
kg
INTERBUS communication
adapters
Twisted Pair SUPI 2 170INT11000 0.070
SUPI 3 170INT11003 0.070
Fiber Optic SUPI 3 170INT12000 0.070
Accessories
Description Length Reference Weight
kg
Branch INTERface, Twisted Pair, SUPI 3 – 170BNO67101 –
INTERBUS Connector Kit, sockets/pins, 9-pin with
male and female connectors for remote bus cable
–170XTS00900 –
INTERBUS Cable (with small connectors) 11 cm
(0.36 ft.)
170MCI00700 –
INTERBUS Cable low-profile connector 100 cm
(3.3 ft.)
170MCI10001 –
INTERBUS cables 100 m
(330 ft.)
TSXIBSCA100 –
400 m
(1312 ft.)
TSXIBSCA400 –
By the meter KAB3225LI –
Momentum front label replacement
(set of 10)
–170XCP10000 –
INTERBUS User Guide – See page 97
170INT11000 / 11003
170INT12000
58 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
Profibus DP communication adapter
The Model 170DNT11000 Profibus DP Communication Adapter for the Momentum
I/O product line provides a direct connection to the Profibus DP Communication
Network for the full family of Momentum I/O modules. This connectivity enables the
Momentum I/O to be used in open architecture control systems with other Profibus
DP compatible control products, including programmable controllers, industrial
computers, operator control stations, drive systems, and other controls, to provide a
flexible, cost-effective solution for distributing I/O modules throughout a large area.
The Profibus DP communication adapter is a single package that is designed to plug
on to any of the Momentum Input/Output modules base, thus allowing the I/O module
full access to the Profibus DP Communication Network. Each Momentum I/O module
is an individual node on the network, with its address user-selected on the dual rotary
switch on the front of the communication adapter. The figure below illustrates a
typical control system using Momentum I/O modules on the Profibus DP network with
programmable controllers and industrial computer systems.
The Profibus Configuration File is required for the configuration of the Momentum I/O
Modules on the Profibus DP network. This file contains the Profibus PNO
Identnumber for all of the Momentum I/O modules, and is available at no charge to
all users as a download over the Internet from the Schneider Electric web page.
The 170DNT11000 Profibus DP Communication Adapter comprises on the front
panel:
1LED Status Indicators comprising: BF (green), bus fault.
2A 9-Pin SUB-D connector for connection to the Profibus DP Network.
3Area for Label (label shipped with I/O base).
4Rotary switches for slave addresses.
Presentation
Network Topology
12345678910111213 14 15 16 12345678910111213 14 15 16 12345678910111213 14 15 16
Controller with
Network Interface Module
Controller with
Network Interface Module Computer with
Network Interface Module
Momentum I/O Modules Third party products
Description
3
4
12
59
Schneider Electric
Characteristics,
references
Modicon Momentum automation
platform 0
Profibus DP communication adapter
Characteristics
Model No. 170DNT11000
Communication bus Profibus DP
Communication rate 9.6 K bit/s…12 M bit/s
Number of nodes (devices) Up to 126 devices (32 without repeater)
Media Twisted Pair
Distance m (ft.) Up to 1 200 (4 000)
Connectors 9 Pin “D” connectors
Error checking CRC-16 error check
Error and fail states Fail safe
Addressing Switch selectable
Mode of operation Master-Slave
Topology Multi-Drop, Ring
Packaging Standard Momentum communications adapter enclosure - IP20 environment
Indicator lights Diagnostic and status light standard
Power source Power supply on-board the I/O base
Agency approvals UL, e, CSA
References
Module
Description Reference Weight
kg
Profibus DP Communication Adapter 170DNT11000 0.070
Accessories
Description Length Reference Weight
kg
Device Master File –(1) –
Profibus DP cable 100 m (328 ft.) TSXPBSCA100 –
400 m (1312 ft.) TSXPBSCA400 –
By the meter KABPROFIB –
Profibus DP connector with Terminator –490NAD91103 –
Profibus DP in-Line Connector –490NAD91104 –
Profibus DP connector with Programming
Port
–490NAD91105 –
Momentum front label replacement
(set of 10)
–170XTS10000 –
Profibus DP User Guide See page 97 –
(1) The Profibus device Master File (381SWA00000) is supplied with the User Guide
870USE0040p, or can be downloaded from the Telemecanique website at
www.telemecanique.com.
170DNT11000
60 Schneider Electric
Presentation,
description
Modicon Momentum automation
platform 0
DeviceNet communication adapter
The Model 170LNT71000 DeviceNet Communication Adapter for the Momentum I/
O product line provides a direct connection to the DeviceNet Communication
Network for the full family of Momentum I/O modules. This connectivity enables the
Momentum I/O to be used in open architecture control systems with other DeviceNet
compatible control products, including programmable controllers, industrial
computers, operator control stations, drive systems, and other controls, to provide a
flexible, cost-effective solution for distributing I/O modules throughout a large area.
The DeviceNet communication adapter is a single package that is designed to plug
on to any of the Momentum Input/Output module bases, thus allowing the I/O module
full access to the DeviceNet Communication Network. Each Momentum I/O module
is an individual node on the network with its address user-selected on the dual rotary
switch on the front of the communication adapter.
The adapter complies with the Open DeviceNet Vendor Association (ODVA)
specification Release 2.0 for network communication protocol and data transfer.
Current information about the ODVA specification can be obtained at the ODVA Web
site: http://www.odva.org.
Electronic Data Sheet Disk
An Electronic Data Sheet (EDC) disk is included with the DeviceNet Adapter´s user
guide (reference 870USE10400). It supplies the application software parameters for
setup of each I/O base. Each file´s format on the disk complies with the ODVA
specification for DeviceNet I/O module EDS parameters. Updated EDS files are
available for downloading from the Customer Support areas of the Schneider
Automation Web Site and Bulletin Board service.
The 170LNT71000 DeviceNet Communication Adapter comprises on the front panel:
1LED status indicators comprising:
v PWR (green), power is present from I/O base
v MNS (green/red), adapter is communicating on network
v IO (green/red), I/O is active, no faults.
2DeviceNet connector.
3Area for label (label shipped with I/O base).
4Rotary switches for slave addresses.
Presentation
Description
34
12
61
Schneider Electric
Characteristics,
references
Modicon Momentum automation
platform 0
DeviceNet communication adapter
Characteristics
Model No. 170LNT71000
ODVA compliance With ODVA Specification Release 2.0
Communication rates K bit/s Supports 125/250/500 standard DeviceNet baud rates
Network power loading Operational from 1 to 25 VDC, 110 mA maximum, 75 mA typical
Number of nodes Up to 64 nodes
Media Twisted Pair
Distance m (ft.) Up to 500 (1640), depending on communication rate
Connectors 5-pin male connector with 5 mm pin-to-pin spacing
Error checking CRC-16 error check
Error and fail states Fail safe
Addressing Switch selectable
Mode of operation CSMA/CA, master-slave, peer-to-peer
Topology Multi-Drop Trunk
Packaging Standard Momentum communication adapter enclosure - IP 20 environment
Indicator lights Diagnostic and status light standard
Power source Power supply on board the I/O base
Agency approvals UL, e, CSA, FM Class I, Div. II
References
Module
Description Reference Weight
kg
DeviceNet Communication Adapter 170LNT71000 0.070
Accessories
Description Quantity Reference Weight
kg
DeviceNet connector –170XTS06000 –
Momentum front label
replacement
Set of 10 170XTS10000 –
DeviceNet communication
adapter User Guide
Includes the EDS configuration
software
See page 97 –
170LNT71000
62 Schneider Electric
Selection guide Modicon Momentum automation
platform 0
M1/M1E processor adapters
Type M1 processor adapters
RAM memory 64 K bit 256 K bit
Flash memory 256 K bit
984 LL program memory 2.4 K bit 12 K bit
IEC program memory –160 K bit
Data memory 2 K bit 4 K bit
Scan time 1 ms/K 0.63 ms/K 1 ms/K 0.63 ms/K
Clock speed 20 MHz 32 MHz 20 MHz 32 MHz
I/O points 2048 4096
I/O drops Up to 2048 I/O points with Modbus Plus option adapter 80 with ProWORX
128 with Concept
Power source Power supply on-board the I/O bases
Communication ports 1 RS 232 Modbus 1 RS 232 Modbus
1 RS 485 Modbus
1 RS 232 Modbus
1 I/O bus
IEC executive Compatible
Type of module 171CCS70000 171CCS70010 171CCS78000 171CCS76000
Pages 66
63
Schneider Electric
0
M1 processor adapters M1E processor adapters
512 K bit 544 K bit
512 K bit 512 K bit 1 M bit 512 K bit 1 M bit
18 K bit
240 K bit –200 K bit –200 K bit
24 K bit
1 ms/K 0.3 ms/K
32 MHz 50 MHz
8192
Up to 2048 I/O points
with
Modbus Plus option
adapter
80 with ProWORX
128 with Concept
Up to 2048 I/O points with
Modbus Plus option adapter
80 with ProWORX
128 with Concept
Power supply on-board the I/O bases
1 RS 232 Modbus
1 RS 485 Modbus
1 RS 232 Modbus
1 I/O bus
1 Ethernet (Transparent Ready class B10)
1 RS 485 Modbus
1 Ethernet (Transparent Ready class B10)
1 I/O bus
Compatible –Supplied –Supplied
171CCC78010 171CCC76010 171CCC98020 171CCC98030 171CCC96020 171CCC96030
67 68 69 68 69
64 Schneider Electric
Presentation Modicon Momentum automation
platform 0
M1/M1E processor adapters
The Momentum M1/M1E processor adapters are based on the Modicon 984 family
of products. You can mount these Adapters on Momentum I/O Bases to provide
intelligence to the I/O. The processor adapter can quickly and independently solve
logic, control its own local I/O (discrete or analog), and communicate to other control
entities through one of a number of Momentum communication options. The
processor adapter can turn an ordinary I/O Base into a PID controller or high-speed
logic solver.
You can create your own controller from a number of different bases, and with other
Momentum options, network your local logic solvers together into an intelligent
subsystem as part of a larger Modicon application, or into a standalone, integrally
networked system with local controllers with extended I/O. A controller can be added
to the different bases and combined with other Momentum options, which can then
be networked together in an intelligent subsystem as part of a larger Modicon
application. The Momentum I/O Base can be made a standalone, integrally
networked system using local controllers with extended I/O.
The Momentum M1/M1E processor adapters are meant to stand alone, be mounted
on a single Momentum I/O Base (with its own extended Momentum I/O connected to
the I/O Bus Port on 171CCS76000 processor adapter), or be mounted together with
one of a variety of Momentum Option Adapters, providing different network
capabilities, a time-of-day clock, and a battery back-up system. The built-in flash
memory is used to store the executive, allowing for convenient field upgrades of the
operating system. The flash memory can also be used to back up your applications,
creating a local copy of your program to be loaded back into RAM, thus providing
original program file integrity. On 171CCS78000 processor adapter, the RS 485 port
can be used to connect to dedicated devices such as an operator interface panel or
a marquee, or used in a master/slave RS 485 network to connect to multiple devices.
The processor adapters can be programmed with Modsoft version 2.5 or greater,
Concept version 2.1 or greater, ProWORX NxT version 2.0 or greater or
ProWORX 32.
The following table describes the characteristics of the Momentum M1/M1E
processor adapters.
Momentum processor adapters have a number of PC programming software options
available. You can program your processor Adapter via the Modbus RS 232 serial
port, or with an M1E processor via Ethernet network.
If using a Modbus Plus Option Adapter in conjunction with a Processor Adapter, you
can program via an SA85 card installed in a PC and connected to the same
Modbus Plus network.
For more specific information, see the appropriate Momentum, ProWORX or
Concept programming software literature and documentation.
Presentation
Characteristics
Processor Adapter RAM Memory Flash Memory Scan Time Modbus Port I/O Bus Port IEC Executive
171CCS70000 64 K 256 K 1 ms/K 1 x RS 232C – –
171CCS70010 64 K 256 K 0.63 ms/K 1 x RS 232C – –
171CCS76000 256 K 256 K 0.63 ms/K 1 x RS 232C 1 x I/O Bus Compatible
171CCS78000 64 K 256 K 1 ms/K 1 x RS 232C
1 x RS 485
– –
171CCC76010 512 K 512 K 1 ms/K 1 x RS 232C 1 x I/O Bus Compatible
171CCC78010 512 K 512 K 1 ms/K 1 x RS 232C
1 x RS 485
–Compatible
171CCC96020 544 K 512 K .3 ms/K 1 x Ethernet 1 x I/O Bus –
171CCC96030 544 K 1 Mb .3 ms/K 1 x Ethernet 1 x I/O Bus Supplied
171CCC98020 544 K 512 K .3 ms/K 1 x RS 485
1 x Ethernet
– –
171CCC98030 544 K 1 Mb .3 ms/K 1 x RS 485
1 x Ethernet
–Supplied
Programming Software for Momentum
Characteristics:
pages 66 to 69
References:
page 70
65
Schneider Electric
Description Modicon Momentum automation
platform 0
M1/M1E processor adapters
A typical Momentum M1/M1E Processor Adapter consists of the following
components:
1Modbus or Ethernet Port connector.
2Optional second port (Modbus or I/O bus).
3LED indicators.
4Fill-in Label.
A typical system, showing a model 171CCS76000 Momentum M1 processor adapter
mounted on top of a Momentum I/O Base. The processor adapter controls the I/O it
is mounted on, the local I/O, and can control externally configured I/O. You can also
use a Modbus Plus Option Adapter with the processor adapter to extend the system's
I/O capacity.
Description
Mounting
1 2
34
Characteristics:
pages 66 to 69
References:
page 70
66 Schneider Electric
Characteristics Modicon Momentum automation
platform 0
M1/M1E processor adapters
Environment
Type of processor 171CCS70000 171CCS70010 171CCS78000 171CCS76000
Temperature Operating °C 0 to 60
Storage °C - 40 to 85
Relative humidity 5 to 96% (non-condensing)
Altitude m2000 (6,500 ft.)
Mechanical withstand
(immunity)
To vibrations 57 to 150 Hz @ 1 gn
10 to 57 Hz @ 0.075 mm d.a
To shocks + 15 gn peak, 11 ms, half sine wave
Designed to meet UL, e, CUL, FM Class 1 Div. 2, NEMA 250 Type 1, and IP 20 conforming to IEC529
Characteristics
Central processing unit (CPU) x 86 based
Word length bit 16
Material Lexan
Voltage VDC 5.0 V (supplied by I/O Base)
Voltage tolerance + 5% (as supplied by I/O Base)
RFI immunity/EMI susceptibility/Electrostatic discharge Meets e mark for open equipment. Open equipment should be installed in an industry
standard enclosure, with access restricted to qualified service personnel
Di-electric strength RS 232 is non-isolated from logic common
Indicator lights Run and communication active
Power source Power supply on-board the Momentum I/O Base
Clock speed MHz 20 32 20 32
Scan time ms/K 10.63 10.63
Communication ports 1Dedicated RS 232C Modbus
2N/A Dedicated RS 485
Modbus
I/O Bus (derivative
of INTERBUS
Capacity 984 LL program memory K2.4 12
IEC program memory K–160
Data memory K2 4
Discrete I/O 2048 In/2048 Out (A total of 2048 words can be configured for
discrete analog I/O, any mix up to the stated limits.)
2048 In/2048 Out
Register I/O 2048 In/2048 Out (A total of 2048 words can be configured for
discrete and analog I/O, any mix up to the stated limits.)
4096 words total
I/O limit –- I/O local on
Modbus
- I/O can be
extended using a
Modbus Plus option
Adapter and Peer
Cop (2048 In/Out)
8192 bits max.:
- 4096 In/4096 Out
on I/O Bus
- I/O can be
extended using a
Modbus Plus option
Adapter and Peer
Cop (2048 In/Out)
I/O bus addressing –80 I/O drops with
ProWORX
128 I/O drops with
Concept
References:
page 70
67
Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
M1/M1E processor adapters
Environment
Type of processor 171CCC76010 171CCC78010
Temperature Operating °C 0 to 60
Storage °C - 40 to 85
Relative humidity 5 to 96% (non-condensing)
Altitude m2000 (6,500 ft.)
Mechanical withstand
(immunity)
To vibrations 57 to 150 Hz @ 1 gn
10 to 57 Hz @ 0.075 mm d.a
To shocks + 15 gn peak, 11 ms, half sine wave
Designed to meet UL, e, CUL, FM Class 1 Div. 2, NEMA 250 Type 1, and IP 20 conforming to IEC52
Characteristics
Central processing unit (CPU) x 86 based
Word length bit 16
Material Lexan
Voltage VDC 5.0 V (supplied by I/O Base)
Voltage tolerance + 5% (as supplied by I/O Base)
RFI immunity/EMI susceptibility/Electrostatic discharge Meets e mark for open equipment. Open equipment should be installed in an industry
standard enclosure, with access restricted to qualified service personnel
Di-electric strength RS 232 is non-isolated from logic common
Indicator lights Run and communication active
Power source Power supply on-board the Momentum I/O Base
Clock speed MHz 32
Scan time ms/K 1
Communication ports 1Dedicated RS 232C Modbus
2I/O Bus (derivative of INTERBUS) Dedicated RS 485 Modbus
Capacity 984 LL program memory K18
IEC program memory K240
Data memory K24
Discrete I/O 8192 In/8192 Out (A total of 8192 bits can be configured for discrete and analog I/O,
any mix up to the stated limits)
Register I/O 26048 In/26048 Out (A total of 26048 words can be configured for discrete and analog
I/O, any mix up to the stated limits)
I/O limit 8192 bits max.:
- 4096 In/4096 Out on I/O Bus
- I/O can be extended using a Modbus
Plus option Adapter and Peer Cop
(2048 In/Out)
- I/O local on Modbus
- I/O can be extended using a Modbus
Plus option Adapter and Peer Cop
(2048 In/Out)
I/O bus addressing 80 I/O drops with ProWORX 128 I/O drops
with Concept
–
References:
page 70
68 Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
M1/M1E processor adapters
Environment
Type of processor 171CCC96020 171CCC98020
Temperature Operating °C 0 to 60
Storage °C - 40 to 85
Relative humidity 5 to 96% (non-condensing)
Altitude m2000 (6,500 ft.)
Mechanical withstand
(immunity)
To vibrations 57 to 150 Hz @ 1 gn
10 to 57 Hz @ 0.075 mm d.a
To shocks + 15 gn peak, 11 ms, half sine wave
Designed to meet UL, e, CUL, FM Class 1 Div. 2, NEMA 250 Type 1, and IP 20 conforming to IEC52
Characteristics
Central processing unit (CPU) x 86 based
Word length bit 16
Material Lexan
Voltage VDC 5.0 V (supplied by I/O Base)
Voltage tolerance + 5% (as supplied by I/O Base)
RFI immunity/EMI susceptibility/Electrostatic discharge Meets e mark for open equipment. Open equipment should be installed in an industry
standard enclosure, with access restricted to qualified service personnel
Di-electric strength Communication port is non-isolated from logic common
Indicator lights RUN, Ethernet LAN active and LAN status
Power source Power supply on-board the Momentum I/O Base
Flash memory K512
Clock speed MHz 50
Scan time ms/K 3
Communication ports 1Ethernet
2I/O Bus (derivative of InterBus) Dedicated RS 485 Modbus
Capacity 984 LL program memory K18
IEC program memory K–
Data memory K24
Discrete I/O 8192 In/8192 Out (A total of 8192 bits can be configured for discrete and analog I/O,
any mix up to the stated limits)
Register I/O 26048 In/26048 Out (A total of 26048 words can be configured for discrete and analog
I/O, any mix up to the stated limits)
I/O limit 8192 bits max.:
- 4096 In/4096 Out on I/O Bus
- I/O can be extended using a Modbus
Plus option Adapter and Peer Cop
(2048 In/Out)
- I/O local on Modbus
- I/O can be extended using a Modbus
Plus option Adapter and Peer Cop
(2048 In/Out)
Transparent Ready services Class B10
Web services “Rack Viewer” access to the product description and status, and to the island
diagnostics
“Data editor” access to the configuration functions and variables
“Web page loader” software tool for loading user Web pages
Ethernet TCP/IP communication
management services
Modbus Messaging (read/write data words)
I/O Scanning
I/O bus addressing 80 I/O drops with ProWORX 128 I/O drops
with Concept
–
References:
page 70
69
Schneider Electric
Characteristics (continued) Modicon Momentum automation
platform 0
M1/M1E processor adapters
Environment
Type of processor 171CCC96030 171CCC98030
Temperature Operating °C 0 to 60
Storage °C - 40 to 85
Relative humidity 5 to 96% (non-condensing)
Altitude m2000 (6,500 ft.)
Mechanical withstand
(immunity)
To vibrations 57 to 150 Hz @ 1 gn
10 to 57 Hz @ 0.075 mm d.a
To shocks + 15 gn peak, 11 ms, half sine wave
Designed to meet UL, e, CUL, FM Class 1 Div. 2, NEMA 250 Type 1, and IP 20 conforming to IEC52
Characteristics
Central processing unit (CPU) x 86 based IEC Executive
Word length bit 16
Material Lexan
Voltage VDC 5.0 V (supplied by I/O Base)
Voltage tolerance + 5% (as supplied by I/O Base)
RFI immunity/EMI susceptibility/Electrostatic discharge Meets e mark for open equipment. Open equipment should be installed in an industry
standard enclosure, with access restricted to qualified service personnel
Di-electric strength RUN, Ethernet LAN active and LAN status
Indicator lights Diagnostic and status lights, standard
Power source Power supply on-board the Momentum I/O Base
Flash memory Mb 1
Clock speed MHz 50
Scan time ms/K 3
Communication ports 1Ethernet
2I/O Bus (derivative of InterBus) Dedicated RS 485 Modbus
Capacity 984 LL program memory K18
IEC program memory K200
Data memory K24
Discrete I/O 8192 In/8192 Out (A total of 8192 bits can be configured for discrete and analog I/O,
any mix up to the stated limits)
Register I/O 26048 In/26048 Out (A total of 26048 words can be configured for discrete and analog
I/O, any mix up to the stated limits)
I/O limit 8192 bits max:
- 4096 In/4096 Out on I/O Bus
- I/O can be extended using a Modbus
Plus option Adapter and Peer Cop
(2048 In/Out)
- I/O local on Modbus
- I/O can be extended using a Modbus
Plus option Adapter and Peer Cop
(2048 In/Out)
Transparent Ready services Class B10
Web services “Rack Viewer” access to the product description and status, and to the island
diagnostics
“Data editor” access to the configuration functions and variables
“Web page loader” software tool for loading user Web pages
Ethernet TCP/IP communication
management services
Modbus Messaging (read/write data words)
I/O Scanning
I/O bus addressing 80 I/O drops with ProWORX 128 I/O drops
with Concept
–
References:
page 70
70 Schneider Electric
References Modicon Momentum automation
platform 0
M1/M1E processor adapters
(1) Transparent Ready Class B10 (embedded standard Web server - standard Ethernet TCP/IP
communication services). For more details, consult our catalog “Transparent Ready, Ethernet
TCP/IP and Web technologies”.
M1/M1E processor adapters
RAM Memory Communication
Port(s)
Clock Speed Reference Weight
kg (oz.)
64 K 1 Modbus 20 MHz 171CCS70000 0.042(1.5)
1 Modbus 32 MHz 171CCS70010 0.042(1.5)
2 Modbus 20 MHz 171CCS78000 0.042(1.5)
256 K 1 Modbus,
1 I/O Bus
32 MHz 171CCS76000 0.042(1.5)
512 K 1 Modbus,
1 I/O Bus
32 MHz 171CCC76010 0.042(1.5)
2 Modbus 32 MHz 171CCC78010 0.042(1.5)
544 K
(1)
1 Modbus,
1 Ethernet
50 MHz 171CCC98020 0.042(1.5)
1 Ethernet,
1 I/O Bus
50 MHz 171CCC96020 0.042(1.5)
544 K, IEC Exec
(1)
1 Modbus,
1 Ethernet
50 MHz 171CCC98030 0.042(1.5)
1 Ethernet,
1 I/O Bus
50 MHz 171CCC96030 0.042(1.5)
Connection accessories and documentation
Description Type Sold in lot of Reference Weight
kg (oz.)
RS 232
communication
cable RJ45 to RJ45
1 m (3 ft.) – 110XCA28201 –
3 m (10 ft.) – 110XCA28202 –
6 m (20 ft.) – 110XCA28203 –
RS 485 cable
connector T for RJ45
––170XTS04000 –
RS 485 terminating
(RJ45 resistor
plugs)
–2170XTS02100 –
D-shell adapters RJ45 to 9-pin
(for AT serial port)
–110XCA20300 –
RJ45 to 25-pin
(for XT serial port)
–110XCA20400 –
Ground clamp ––424244739 –
ConneXium
cabling system
Ethernet cabling for
M1E processor
adapters
– See page 78 –
Concept software – – See page 88 –
ProWORX software – – See page 93 –
Processor adapters
user guide
– – See page 97 –
171CCS7
p
0
p
0
171CCC7
p
010
171CCC9
p
020 / 30
Presentation:
page 64
Description:
page 65
Characteristics:
pages 66 to 69
71
Schneider Electric
Description,
characteristics,
references
Modicon Momentum automation
platform 0
M1 processor adapters
Power supply
An optional power supply, the 170CPS11100, is available for the Momentum product
family. Normally, power for controller, option, and communication modules is
obtained from the power supply built into the I/O bases modules. However, the
170CPS11100 provides a power solution for applications requiring conversion from
230 or 120 VAC to 24 VDC. The supply mounts alongside the other Momentum
components on the DIN rail. The jumper-selectable, 230/120 VAC. power is input to
the power supply with the use of a spring- or screw-type terminal strip; the 24 VDC
power is output to the system in the same manner.
A power supply consists of the following components:
1Fill-in identifying label.
2LED status display.
3Input voltage (AC) terminal strip connector mounting slot.
4Output voltage (DC) terminal strip connector mounting slot.
Description
1
3
2
4
Characteristics
Model 170CPS11100
Input voltage VAC 120 or 230 (jumper selectable)
Output voltage VDC 24
Maximum output A0.7
External fuses 120 VAC
input voltage
A0.63, time lag
230 VAC
input voltage
A0.315, time lag
References
Designation Description Reference Weight
kg (oz.)
Power supply 120 VAC or 230 VAC 170CPS11100 0.284 (10)
Terminal strips
(set of 3)
With spring terminals 170XTS01200 –
With screw terminals 170XTS01100 –
170CPS11100
72 Schneider Electric
Selection guide Modicon Momentum automation
platform 0
Option adapters
Configuration Modbus Plus option adapters
Communication network Modbus Plus
Communication port(s) 1 Modbus Plus 2 redundant Modbus Plus
Communication port connector 9-pin D-shell
Time-of-day clock On-board, + 13 sec./day accuracy
Back-up battery User-replaceable 2/3 AA Lithium
Voltage 5 VDC supplied by I/O base
Operating temperature 0 to 60°C
Humidity 5 to 95%, relative non condensing
Shock + 15 g peak, 11 ms, half-sine wave
Vibration 10 to 57 Hz @ 0,075 mm d.a.
Type of module 172PNN21022 172PNN26022
Page 76
73
Schneider Electric
0
Serial option adapter
General-purpose serial communications
1 software-selectable RS 232/RS 485 serial port
9-pin D-shell
On-board, + 13 sec./day accuracy
User-replaceable 2/3 AA Lithium
5 VDC supplied by I/O base
0 to 60°C
5 to 95%, relative non condensing
+ 15 g peak, 11 ms, half-sine wave
10 to 57 Hz @ 0,075 mm d.a.
172JNN21032
76
74 Schneider Electric
Presentation Modicon Momentum automation
platform 0
Option adapters
The Momentum option adapters, mounted on Momentum I/O bases, can be used to
enhance the capabilities of the Momentum processor adapters that mount on top of
the option adapter, to fulfill a variety of roles. The option adapters allow you to
network your local logic solvers together into an intelligent subsystem as part of a
larger Schneider Electric application, or into a standalone, integrally networked
system with local controllers with extended I/O.
The Momentum option adapters are:
b172PNN21022 - one Modbus Plus communication port,
b172PNN26022 - two redundant Modbus Plus communication ports,
b172JNN21032 - one general-purpose serial communication port, RS 232 or
RS 485 selectable.
Each of these option adapters provides an on-board, TOD (Time-Of-Day) clock that
is available to the application residing in the processor adapter. The clock is useful
for the scheduling of events, time-stamping operations and operator interface
requirements. In addition, each option adapter contains a battery-backup system that
maintains the application and its variables in the event of a power outage to the
processor adapter. The option adapter's convenient side-door access allows for
quick replacement of the single 2/3 AA Lithium battery.
In addition to the TOD clock and battery backup features, the 172PNN21022 adapter
allows you to add networking to the intelligent I/O base. Model 172PNN26022 allows
you to add redundantly-cabled networking to the I/O base. This opens the
Momentum product line to a broad spectrum of applications. You can use the port to
connect to other processors, such as:
bOther Momentum processor/option adapters
bOther PLCs enabled with Modbus Plus
bMomentum Modbus Plus communication adapters and I/O bases
bOther third party devices using Modbus Plus to communicate.
Model 172JNN21032 allows you to add a second, defacto-industry standard Modbus
port (selectable RS 232/485) to the I/O base. You can use the port to connect to other
processors, such as other Momentum processor/option adapters, and other devices,
such as operator interface panels and display marquees.
Momentum processor adapters have a number of PC programming software options
available. You can program your processor adapter via the Modbus RS 232 serial
port, or if using a Modbus Plus option adapter in conjunction with a processor
adapter, via an SA85 card installed in a PC and connected to the same Modbus Plus
network. For more specific information, see the appropriate Momentum, ProWORX,
and Concept programming software documentation.
Presentation
Programming software for Momentum
75
Schneider Electric
Description Modicon Momentum automation
platform 0
Option adapters
A typical Momentum option adapter consists of the following components:
19-pin D-shell connector(s) for Modbus Plus communications.
2Battery compartment.
3LED indicators.
4Address switches for Modbus Plus.
The Momentum option adapters provide the processor adapters with additional
networking capabilities, a time-of-day clock, and a battery back-up. The option
adapters also snap onto the I/O base; in this figure, the processor adapter stacks on
top. Here, the option adapter is used in conjunction with the processor adapter to
extend the system’s I/O capacity.
Description
Mounting
1
2
3
4
76 Schneider Electric
Characteristics Modicon Momentum automation
platform 0
Option adapters
Characteristics
Model No 172PNN21022 172PNN26022 172JNN21032
Time-of-day clock On-board, ± 13 s/day accuracy
Battery Type User-replaceable 2/3 AA Lithium
Service life < 30 days from the time a battery-low indication is received, to actual battery failure
@ 40 °C maximum service life ambient temperature with the system continuously
powered down
Shelf life In excess of 5 years at room temperature
Communication port(s) One Modbus Plus port
Drop address range 1 to 64
Two redundant Modbus
Plus ports
General-purpose serial port
RS 232 or RS 485
selectable
Communication port connector(s) 9-pin D-shell
Operating temperature °C 0 to 60
Storage temperature °C - 40 to 85
Relative humidity 5 to 95% (non-condensing)
Attitude m (ft.) 2000 (6.562)
Shock ± 15 gn peak, 11ms, half sine wave
Vibration Hz 57 to 150 @ 1 gn
10 to 57 @ 0.075 mm d.a.
Height in
(mm)
1.01 (25.)
[2.10 (58.3) on battery side]
Width in
(mm)
5.57 (143.1)
Depth in
(mm)
2.36 (60.06)
Weight oz.
(g)
3.00 (85.05)
Material Lexan
Voltage VDC 5.0 (supplied by I/O base)
Voltage tolerance ± 5% (as supplied by I/O base)
RFI immunity/EMI susceptibility/Electrostatic discharge Meets e mark for open equipment. Open equipment should be installed in an industry
standard enclosure, with access restricted to qualified service personnel
Di-electric strength VDC 500
Designed to meet UL, e, CSA, NEMA 250 Type 1, and IP 20 conforming to
IE 529
UL, CSA, NEMA 250 Type 1,
and IP 20 conforming to
IE 529, FM Class I, Div. II
Packaging Standard Momentum option adaptor
Indicator lights Communication active light
Power source Power supply on-board the Momentum I/O base
77
Schneider Electric
References Modicon Momentum automation
platform 0
Option adapters
Option adapter modules
Description Reference Weight
kg (oz.)
Modbus Plus option adapter, Single Port 172PNN21022 0.070 (2.5)
Modbus Plus option adapter, dual redundant ports 172PNN26022 0.070 (2.5)
Serial option adapter, single serial port 172JNN21032 0.070 (2.5)
Accessories
Description Use Length Reference Weight
kg
From To
Standard Modbus Plus cables T-junction box T-junction box 30 m (100 ft.) 490NAA27101 –
150 m (100 ft.) 490NAA27102 –
300 m (100 ft.) 490NAA27103 –
450 m (1500 ft.) 490NAA27104 –
1500 m (5000 ft.) 490NAA27106 –
Modbus Plus Drop cables Communication
modules for
Momentum I/O bases
T-junction box 2.4 m (8 ft.) 900NAD21110 0.530
6 m (20 ft.) 990NAD21130 0.530
Modbus Plus RS 485 cables – – 25 m (10.0 in) 170MCI02010 –
1 m (3 ft.) 170MCI02036 –
RS 485 master communication
cable (RJ45/RJ45)
– – 0.3 m (1 ft.) 170MCI04110 –
Modbus Plus RJ45 cable – – 3 m (10 ft.) 170MCI02120 –
Modbus Plus RJ45 cables
double-ended
– – 3 m (10 ft.) 170MCI02180 –
10 m (30 ft.) 170MCI02080 –
RS 232 communication cables
(RJ45/RJ45)
– – 1 m (3 ft.) 110XCA28201 –
3 m (10 ft.) 110XCA28202 –
6 m (20 ft.) 110XCA28203 –
Description Use Reference Weight
kg
Modbus Plus taps IP 20 junction box for tap-off connection (T), integrate the
terminator. Requires the wiring tools 043 509 383
990NAD23000 0.230
IP 65 junction box for tap-off connection (T), supports 1 RJ45
connector on front panel for terminal
990NAD23010 –
Modbus Plus line connector
(9-Pin Sub-D)
Communication module connection ASMBKT085 –
Modbus Plus line terminators
(sold in lot of 2)
2 impedance adapters for box
(IP 20) 990 NAD 230 00 (replacement part)
ASMBKT185 –
2 impedance adapters for box
(IP 65) 990 NAD 230 10
990NAD23011 –
D-shell adapters RJ45 to 9-pin (for AT serial port) 110XCA20300 –
RJ45 to 25-pin (for XT serial port) 110XCA20400 –
Description Sold in lots of Reference Weight
kg (oz.)
RS 485 (9-Pin Sub-D) cable connector T for RJ45 –170XTS04000 –
RJ45 shielded connectors 25 170XTS02200 –
Modbus Plus terminating RJ45 resistor plugs 2170XTS02100 –
RS 485 (RJ45) cable connector T for RJ45 –170XTS04100 –
RS 485 Multi-Master RJ45 shunt plugs 2170XTS04200 –
Modbus Plus (9-Pin Sub-D) cable connector T for RJ45 –170XTS02000 –
Ground clamp –424244739 –
Wiring tool
Mounting trunk and tap wires on the IP20 junction box 990 NAD 230 00
–043509383 –
172PNN21022
172PNN26022
172JNN21032
78 Schneider Electric
Presentation,
characteristics,
references
Modicon Momentum automation
platform 0
Cabling system
ConneXium hubs
Hubs are used for transmitting signals between several media (ports). Hubs are “plug
and play” devices that do not need any configuration.
The use of hubs makes it possible to create the following topologies:
bStar topology using hubs.
bTree topology using hubs.
For more details, consult our catalog “Transparent Ready, Ethernet TCP/IP and Web
technologies”.
(1) Depends on the optical budget and fiber attenuation (typical specification: 2000 m (6.560 ft.).
Presentation
DTE DTE
DTE DTE DTE DTE DTE
DTE
DTE
Star topology Ring topology
(with 499NOH10510)
Tree topology
Hub
Hub
HubHub
Hub
Hub Hub
Characteristics and references
Hubs
Interfaces Copper cable ports Number and type 4 x 10BASE-T ports 4 x 100BASE-TX ports 3 x 10BASE-T ports
Shielded connectors RJ45
Medium Shielded twisted pair
Line length 100 m
Optical fiber ports Number and type –2 x 10BASE-FL ports
Connectors –ST (BFOC)
Medium –Multi mode optical fiber
Line length
50/125 µm fiber –2300 m (7.546 ft.) (1)
62.2/125 µm fiber –3100 m (10.170 ft.) (1)
Optical budget
–
50/125 µm fiber 10 dB
62.2/125 µm fiber –13 dB
Topology Number of cascaded hubs (copper) 4 max. 2 max. 4 max.
Number of hubs in a ring (fiber) –11 max.
Redundancy P1 and P2 redundant power supplies P1 and P2 redundant power
supplies, redundant optical
ring
Power supply Voltage c 24 V (18 to 32 V), safety extra low voltage (SELV)
Power consumption 80 mA (130 max. at c 24 V) 210 mA (270 max. at c 24 V) 160 mA (350 max. at c 24 V)
Removable terminal 5-pin
Operating temperature 0 to + 60 °C (32 to 140 °F)
Relative humidity 10 to 95% non condensing
Degree of protection IP 30 IP 20 IP 30
Dimensions W x H x D mm (in) 40 x 125 x 80
(1.57 x 4.92 x 3.14)
47 x 135 x 111
(3.15 x 5.51 x 3.35)
80 x 140 x 85
(1.85 x 5.31 x 4.37)
Weight kg (lbs) 0.530 (1.17) 0.240 (0.53) 0.900 (1.98)
Conformity to standards cUL 60950, UL 508 and CSA 142, UL 1604 and CSA 213 Class 1 Division 2, e, GL
FM 3810, FM 3611 Class 1
Division 2
–FM 3810, FM 3611 Class 1
Division 2
LED indicators Power, activity, link Power, activity, link, error Power, activity, link, collision
Alarm contact Power supply failure, permanent fault in hub, faulty link status of TP port
(volt-free contact 1 A max. under c 24 V)
Reference 499NEH10410 499NEH14100 499NOH10510
79
Schneider Electric
Presentation,
characteristics,
references
Modicon Momentum automation
platform 0
Cabling system
ConneXium transceivers
The use of ConneXium transceivers makes it possible to perform the following:
bCreation of linear fiber optic bus topologies, for products with twisted pair cable
Ethernet connection.
bInterfacing products with twisted pair cable Ethernet connection with fiber optic
cable.
Transceivers are “plug and play” devices that do not need any configuration. For
more details, consult our catalog “Transparent Ready, Ethernet TCP/IP and Web
technologies”.
ConneXium transceivers provide fiber optic connections for transmission in areas
subject to interference (high levels of electromagnetic interference) and for long
distance communications.
(1) Depends on the optical budget and fiber attenuation (typical specification: 2000 m (6.560 ft.).
Presentation
DTE
DTEDTE
Linear topology on optical fiber
Characteristics and references
Transceivers
Interfaces
Copper
cable port Number and type 1 x 10BASE-T port 1 x 100BASE-TX port
Shielded connectors RJ45
Medium Shielded twisted pair
Line length 100 m (328 ft.)
Optical fiber
ports Number and type 1 x 10BASE-FL port 1 x 100BASE-FX port
Connectors ST (BFOC) SC
Medium Multi mode optical fiber
Line length
50/125 µm fiber 2300 m (7.546 ft.) (1) 5000 m (16.404 ft.) (1)
62.5/125 µm fiber 3100 m (10.170 ft.) (1) 4000 m (13.123 ft.) (1)
Optical budget
50/125 µm fiber 10 dB 8 dB
62.5/125 µm fiber 13 dB 11 dB
Redundancy P1 and P2 redundant power supplies
Power supply Voltage c 24 V (18 to 32), safety extra low voltage (SELV)
Power consumption 80 mA (100 max. at c 24 V) 190 mA (240 max. at c 24 V)
Removable terminal 5-pin
Operating temperature 0 to + 60 °C (32 to 140 °F)
Relative humidity 10 to 95% non condensing
Degree of protection IP 30 IP 20
Dimensions W x H x D mm (in) 40 x 134 x 80 (1.57 x 5.47 x 3.14) 47 x 135 x 111 (3.15 x 5.51 x 3.35)
Weight kg (lbs) 0.520 (1.15) 0.230 (0.50)
Conformity to standards cUL 60950, UL 508 and CSA 142, UL 1604 and CSA 213 Class 1 Division 2, e, GL
FM 3810, FM 3611 Class 1 Division 2 –
LED indicators P1 and P2 power supplies, Ethernet link/port status
Alarm contact Power supply failure, permanent fault in hub, faulty link status of TP port
(volt-free contact 1 A max. under c 24 V)
Reference 499NTR10010 499NTR10100
80 Schneider Electric
Presentation,
characteristics,
references
Modicon Momentum automation
platform 0
Cabling system
ConneXium switches
Presentation
Switches are used to increase the limits of
architectures based on hubs or transceivers, by
separating collision domains. Higher layer
communication is provided between the ports, and
collisions at link layer are not propagated (filtering).
They therefore improve performance by better
allocation of the pass band due to the reduction of
collisions and the network load.
Certain Connexium switches also enable redundant
architectures to be created on twisted pair copper or
fiber optic rings.
Switches are “plug & play” devices that do not need any
configuration. They can also be administered remotely
via the SNMP or HTTP protocols for monitoring and
diagnostics purposes.
Characteristics and references
Switches Unmanaged
basic
Shielded twisted pair and optical fiber, unmanaged
Interfaces Copper cable ports Number and type 5 x
10BASE-T/
100BASE-TX ports
4 x
10BASE-T/
100BASE-TX ports
3 x
10BASE-T/
100BASE-TX ports
4 x
10BASE-T/
100BASE-TX ports
3 x
10BASE-T/
100BASE-TX ports
Shielded connectors RJ45
Medium Shielded twisted pair
Max. distances
100 m (328 ft.)
Optical fiber ports Number and type –1 x 100BASE-FX
port
2 x 100BASE-FX
ports
1 x 100BASE-FX
port
2 x 100BASE-FX
ports
Connectors –SC
Medium –Multi mode fiber Mono mode fiber
Fiber length
–
50/125 µm fiber –5000 m (16.404 ft.) (1)
62.5/125 µm –4000 m (13.124 ft.) (1) –
9/125 µm
– – 32 500 m (106.627 ft.) (2)
Optical budget
50/125 µm fiber –8 dB –
62.5/125 µm –11 dB –
9/125 µm
–16 dB
Topology Number of switches Cascaded Any
Redundant in a ring –
Power supply redundancy –P1 and P2 redundant power supplies
Power supply Voltage c 24 V (19.2 to
30 V)
c 24 V (18 to 32 V), safety extra low voltage (SELV)
Power consumption 100 mA (120 max.) 200 mA max. 240 mA max. 200 mA max. 240 mA max.
Removable terminals 3-pin 5-pin
Operating temperature 0 to + 60°C (32 to 140 °F)
Relative humidity 10 to 95% non condensing
Degree of protection IP 20
Dimensions W x H x D mm (in)
75.2 x 143 x 43
(2.96 x 5.63 x
1.69)
47 x 135 x 111
(3.15 x 5.51 x 3.35)
Weight kg (lbs) 0.190 (0.42) 0.330 (0.72) 0.335 (0.74) 0.330 (0.72) 0.335 (0.74)
Conformity to standards
UL 508, CSA 1010,
EN 61131-2
cUL 60950, UL 508 and CSA 142, UL 1604 and CSA 213 Class 1 Division
2, e, GL
LED indicators Power supply,
ETH link status,
10/100 M bps
P1 and P2 power supplies, Ethernet link status, transmission activity, error
Alarm contact –Activity, power supply failure, permanent fault in switch, faulty link status of
TP port (volt-free contact 1 A max. under c 24 V)
Reference 499NES25100 499NMS25101 499NMS25102 499NSS25101 499NSS25102
(1) Depends on the optical budget and fiber attenuation (typical specification: 2 km).
(2) Depends on the optical budget and fiber attenuation (typical specification: 15 km).
DTE
DTEDTE
DTE DTE
DTE DTE
DTE DTE
DTE
DTEDTE
DTE DTE
DTE
DTEDTE
DTE DTE
DTE DTE
100 M bit/s
optical ring
Collision domain 1 Collision domain 2
Collision
domain 3
81
Schneider Electric
Presentation,
characteristics,
references
Modicon Momentum automation
platform 0
Cabling system
ConneXium switches
Characteristics and references (continued)
Switches Unmanaged, copper Managed, copper Managed, copper + fiber
Interfaces Copper cable ports Number and type 8 x 10BASE-T/
100BASE-TX ports
7 x 10BASE-T/
100BASE-TX ports
5 x 10BASE-T/100BASE-TX ports
Shielded connectors RJ45
Medium Shielded twisted pair
Max. distances
100 m (328 ft.)
Optical fiber ports Number and type –2 x 100BASE-FX ports
Connectors –SC
Medium –Multi mode optical
fiber
Mono mode optical
fiber
Fiber length
50/125 µm –5000 m (16.404 ft.) (1) –
62.2/125 µm –4000 m (13.123 ft.) (1) –
9/125 µm
– – 32 500 m (106.627 ft.)
(2)
Optical budget –
50/125 µm –8 dB –
62.2/125 µm –11 dB –
9/125 µm
– – 16 dB
Ethernet services –FDR client, SNMP V3, SNTP, multicast filtering for optimization of the
Global Data protocol, Web based configuration
VLAN, IGMP Snooping, RSTP (Rapid Scanning Three Protocol),
Port priority, Flow control, Port security
Topology Number of switches Cascaded Any
Redundant in a ring –50 max.
Redundancy P1 and P2 redundant power supplies
Power supply Voltage c24 V (88 to 32 V), safety extra low voltage (SELV)
Power consumption 125 mA (290 max.) 400 mA
Removable terminals 5-pin
Operating temperature 0 to + 60°C 0 to + 55°C
Relative humidity 10 to 95% non condensing
Degree of protection IP20
Dimensions W x H x D mm (in) 47 x 135 x 111
(3.15 x 5.51 x 3.35)
110 x 131 x 111 mm
(4.33 x 5.16 x 4.37)
Weight kg (lbs) 0.230 (0.72) 0.460 (1.00)
Conformity to standards cUL 60950, UL 508 and CSA 14, UL 1604 and CSA 213 Class 1 Division 2, e, GL
LED indicators P1 and P2 power
supplies, Ethernet link
status,
P1 and P2 power supplies, Ethernet link status, redundancy
management
Alarm contact Power supply failure, permanent fault in hub, faulty link status of TP port
(volt-free contact 1 A max. under c 24 V)
–Redundancy health
Reference 499NES18100 499NES27100 499NOS27100 499NSS27100
(1) Depends on the optical fiber budget and fiber attenuation (typical specification: 2 km).
(2) Depends on the optical fiber budget and fiber attenuation (typical specification: 15 km).
82 Schneider Electric
Presentation,
characteristics,
references
Modicon Momentum automation
platform 0
Cabling system
ConneXium IP 67 switch
Ethernet cables: see page 83.
Characteristics and references
IP 67 switch Unmanaged, copper
Interfaces Copper cable ports Number and type 6 x 10BASE-T/ 100BASE-TX ports
Shielded connectors M12 (type D)
Medium Shielded twisted pair
Max. distances
100 m (328 ft.)
Optical fiber ports Number and type –
Connectors –
Medium –
Fiber length
–
Optical budget –
Ethernet services Store and forward, auto MDI/MDX (no need cross over cable), Duplex mode and speed auto
negotiation, auto polarity
Topology Number of switches Cascaded Any
Redundant in a ring –
Redundancy –
Power supply Voltage c 24 V (c 18 to 32 V), safety extra low voltage (SELV)
Power consumption 100mA
Removable terminals 5-pin
Operating temperature 0 to + 60°C
Relative humidity –
Degree of protection IP67
Dimensions W x H x D mm (in) 60 x 126 x 31 (2.36 x 4.96 x 1.22)
Weight kg (lbs) 0.210 (0.46)
Conformity to standards cUL 508 and CSA 22-214
LED indicators Power supplies, link status, data activity
Alarm contact –
Reference TCSESU051F0
Separate parts
Power cables, length 2,5 m (8.2 ft.) Female M12 straight connector Female M12 elbow wed connector
Reference XZCP1164L XZCP1264L
Spare power connector Female M12 straight connector Female M12 elbow wed connector
Reference XZCC12FDM50 XZCC12FCM50B
83
Schneider Electric
Presentation,
characteristics,
references
Modicon Momentum automation
platform 0
Cabling system
ConneXium connection cables
ConneXium shielded connection cables are available in two versions to meet current
standards and approvals:
bStandard EIA/TIA 568 shielded twisted pair cables:
These cables conform to the EIA/TIA-568 standard, category 5, IEC 11801/EN
50173 class D. Their fire behavior conforms to NFC 32070# class C2 and IEC 322/1,
Low Smoke Zero Halogen (LSZH).
bUL and CSA 22.1 approved shielded twisted pair cables:
These cables are UL and CSA 22.1 approved. Their fire resistance conforms to
NFPA 70.
Presentation
490NT
p
000
pp
References
Standard EIA/TIA 568 shielded twisted pair cables
Description Pre-equipped at both ends Length
m(ft.)
Reference Weight
kg
Straight-through
shielded twisted pair
cables
2 RJ45 connectors
For connection to terminal
devices (DTE)
2 (6.6) 490NTW00002 –
5 (16.4) 490NTW00005 –
12 (39.4) 490NTW00012 –
40 (131.2) 490NTW00040 –
80 (262.5) 490NTW00080 –
Description Pre-equipped at both ends Length Reference Weight
kg
Crossed cord
shielded twisted pair
cables
2 RJ45 connectors
For connections between
hubs, switches and
transceivers
5 (16.4) 490NTC00005 –
15 (49.2) 490NTC00015 –
40 (131.2) 490NTC00040 –
80 (262.5) 490NTC00080 –
UL and CSA 22.1 approved shielded twisted pair cables
Description Pre-equipped at both ends Length Reference Weight
kg
Straight-through
shielded twisted pair
cables
2 RJ45 connectors
For connection to terminal
devices (DTE)
2 (6.6) 490NTW00002U –
5 (16.4) 490NTW00005U –
12 (39.4) 490NTW00012U –
40 (131.2) 490NTW00040U –
80 (262.5) 490NTW00080U –
Description Pre-equipped at both ends Length Reference Weight
kg
Crossed cord
shielded twisted pair
cables
2 RJ45 connectors
For connections between
hubs, switches and
transceivers
5 (16.4) 490NTC00005U –
15 (49.2) 490NTC00015U –
40 (131.2) 490NTC00040U –
80 (262.5) 490NTC00080U –
Description Pre-equipped at both ends Length
m(ft.)
Reference Weight
kg
Glass fiber optic
cables for terminal
devices (DTE) to
hubs, switches and
transceivers
1 SC connector and
1 MT-RJ connector
5 (16.4) 490NOC00005 –
1 ST (BFOC) connector and
1 MT-RJ connector
5 (16.4) 490NOT00005 –
2 MT-RJ connectors 3 (9.8) 490NOR00003 –
5 (16.4) 490NOR00005 –
15 (49.2) 490NOR00015 –
490NOC00005
490NOR00005
490NOT00005
84 Schneider Electric
Modicon Momentum automation
platform 0
Concept programming software
Concept is a software configuration and application programming tool for the
automation platform. It is a Windows-based software that can be run on a standard
personal computer. The configuration task can be carried out online (with the PC
connected to the CPU) or offline (PC only). Concept supports the configuration by
recommending only permissible combinations, thereby preventing misconfiguration.
During online operation, the configured hardware is checked immediately for validity,
and illegal statements are rejected.
When the connection between programming unit (PC) and CPU is established, the
configured values (e.g., from the variables editor) are checked and compared with
actual hardware resources. If a mismatch is detected, an error message is issued.
Concept editors support five IEC programming languages:
bFunction block diagram (FBD)
bLadder diagram (LD)
bSequential function chart (SFC)
bInstruction list (IL)
bStructured text (ST)
as well as Modsoft-compatible ladder logic (LL984). IEC 61131-3 compliant data
types are also available. With the data type editor, custom data types can be
converted to and from the IEC data types.
The basic elements of the FBD programming language are functions and function
blocks that can be combined to create a logical unit. The same basic elements are
used in the LD programming language; additionally, LD provides contact and coil
elements. The SFC programming language uses basic step, transition, connection,
branch, join and jump elements. The IL and ST text programming languages use
instructions, expressions, and key words. The LL984 programming language uses
an instruction set and contact and coil elements.
You can write your control program in logical segments. A segment can be a functional
unit, such as conveyor belt control. Only one programming language is used within a
given segment. You build the control program, which the automation device uses to
control the process, by combining segments within one program. Within the program,
IEC segments (written in FBD, LD, SFC, IL and ST) can be merged. The LL984
segments are always processed as a block by the IEC segments. Concept's
sophisticated user interface uses windows and menus for easy navigation.
Commands can be selected and executed quickly and easily using a mouse.
Context-sensitive help is available at each editing step.
Variables for linking basic objects within one section are not required by the graphic
programming languages (FBD, LD, SFC and LL984) since these links are created by
connections. These connections are managed by the system, which eliminates any
configuration effort. Other variables, such as variables for data transfers between
different sections, are configured with the variables editor. With the data type editor,
custom data types can be derived from existing data types.
Presentation
PLC hardware configuration
Presentation
85
Schneider Electric
Modicon Momentum automation
platform 0
Concept programming software
Concept provides an editor for each programming language. These editors contain
custom menus and tool bars. You can select the editor to be used as you create each
program segment.
In addition to the language editors, Concept provides a data type editor, a variables
editor and a reference data editor.
With the IEC 61131-3 function block diagram language, you can combine elementary
functions, elementary function blocks (EFBs) and derived function blocks (all three of
which are known as FFBs) with variables in an FBD. FFBs and variables can be
commented. Text can be freely placed within the graphic. Many FFBs offer an option
for input extensions.
Concept provides various block libraries with predefined EFBs for programming an
FBD. EFBs are grouped in the libraries according to application types to facilitate the
search.
In the FBD editor, you can display, modify and load initial values; current values can
be displayed. The CLC and CLC_PRO libraries allow you to display animated
diagrams of the FFBs and a graph of the current values.
For custom function blocks (DFBs), the Concept-DFB editor is used. In this editor, you
can create your own function blocks from EFBs or existing DFBs. DFBs created in the
FBD editor can be recalled in the LD, IL and ST editors, and DFBs created in the LD, IL
and ST editors can be used in the FBD editor.
With the IEC 61131-3 ladder diagram language, you can build an LD program with
elementary functions, function blocks and derived function blocks (all of which are
known as FFBs), along with contacts, coils and variables. FFBs, contacts, coils and
variables can be commented. Text can be placed freely within the graphics. Many
FFBs offer an option for input extensions.
The structure of an LD segment corresponds to that of a current path for relay
circuits. On its left side is a left bus bar, which corresponds to the phase (L conductor)
of a current path. As with a current path, only the LD objects (contacts, coils) connected
to a power supply (i.e., connected to the left bus bar) are processed in LD
programming. The right bus bar, which corresponds to the neutral conductor, is not
visible. However, all coils and FFB outputs are internally connected to it in order to
create a current flow.
The same EFB block libraries available for the FBD editor can be used in the LD
editor to program a ladder diagram.
In the LD editor, initial values can be displayed, modified and loaded; current values
can be displayed. For the EFBs in libraries CLC and CLC_PRO, animated diagrams
of the FFBs and a graph of the current values can be displayed.
For custom function blocks (DFBs), the Concept-DFB editor is used. With this editor,
you can create your own function blocks from EFBs or existing DFBs. DFBs created in
the LD editor can be recalled in the FBD, IL and ST editors, and DFBs created in the
FBD, IL and ST editors can be used in the LD editor.
Functions
Function block diagram (FBD)
Ladder diagram (LD)
Functions
86 Schneider Electric
Modicon Momentum automation
platform 0
Concept programming software
With the IEC 61131-3 sequential function chart (SFC) language, you can define a
series of SFC objects that comprise a control sequence. Steps, transitions and jumps
in the sequence can be commented. You can place text freely within graphics. You
can assign any number of actions to every step. A series of monitoring functions–
e.g., maximum and minimum monitoring time–can be integrated into each step's
characteristics. The actions can be assigned an attribute symbol (as required by IEC)
to control the action's performance after it has been activated–e.g., a variable can be
set to remain active after exiting.
With the IEC 61131-3 IL language, you can call entire functions and function blocks
conditionally or unconditionally, execute assignments and make conditional and
unconditional jumps within a program segment.
IL is a text-based language, and standard Windows word processing tools can be
used to generate code. The IL editor also provides several word processing
commands. Keywords, separators and comments are spell-checked automatically as
they are entered. Errors are highlighted in color.
For custom function blocks (DFBs), the Concept-DFB editor is used. In this editor, you
can create your own function blocks from EFBs or existing DFBs. DFBs created in the
IL editor can be recalled in the ST, LD and FBD editors, and DFBs created in the ST,
LD and FBD editors can be used in the IL editor.
With the IEC 61131-3 ST language, you can call function blocks, execute functions
and assignments and conditionally execute and repeat instructions. The ST
programming environment is similar to Pascal. It is a text-based language, and
Windows word processing functions can be used to enter code. The ST editor itself
also provides several word processing commands. Keywords, separators, and
comments are spell-checked automatically as they are entered. Errors are
highlighted in color.
Custom function blocks (DFBs) created with the ST editor can be called in the IL, LD
and FBD editors; DFBs created in the IL, LD and FBD editors can be used in the ST
editor.
(1) SFC language, only available with Concept M and Concept XL software.
Functions (continued)
Sequential function chart (SFC) (1)
Instruction list (IL)
Structured text (ST)
Functions (continued)
87
Schneider Electric
Modicon Momentum automation
platform 0
Concept programming software
The data type editor defines new derived data types. Any elementary data types and
derived data types already existing in a project can be used for defining new data
types. With derived data types, various block parameters can be transferred as one
set. Within the program, this set is divided again into single parameters, processed,
then output as either a parameter set or individual parameters. Derived data types
are defined in text format, and standard Windows word processing tools can be used.
The data type editor also provides several word processing commands.
The variables editor contains input options for:
bThe variable type (located variable, unlocated variable, constant).
bThe symbolic name.
bThe data type.
bDirect address (explicit, if desired).
bComments.
bIdentification as human-machine interface (HMI) variable for data exchange.
In online mode, the reference data editor displays, forces and controls variables.
The editor contains the following options:
bDefault values for the variable.
bStatus display for the variable.
bVarious format definitions.
bThe ability to isolate the variable from the process.
Functions (continued)
Data type editor
Variables editor
Reference data editor
Functions (continued)
88 Schneider Electric
Modicon Momentum automation
platform 0
Concept programming software
The IEC library contains the EFBs defined in IEC 61131-3 (calculations, counters,
timers, etc)
.
The extended library contains useful supplements to various libraries. It provides EFBs
for mean value creation, maximum value selection, negation, triggering, converting,
building a traverse with interpolation of the first order, edge detection and
determination of the neutral range for process variables.
The system library contains EFBs in support of system functions. It provides EFBs for
cycle time detection, utilization of various system clocks, control of SFC sections and
system status display.
The CLC library is used for defining process-specific control loops. It contains
control, differentiation, integration and polygon graph EFBs. The CLC_PRO library
contains the same EFBs as the CLC library along with data structures.
The communication libraries of built-in function blocks provide easy integration of
programs which allow communication between PLCs or HMI devices from within the
PLC's application program. Like other function blocks, these EFBs can be used in all
languages to share data, or provide data to the HMI device for display to the operator.
The diagnostics library is used for troubleshooting the control program. It contains
EFBs for action, reaction, interlocking, and process prerequisite diagnostics, along
with signal monitoring.
The LIB984 library provides common function blocks used in both the 984 ladder logic
editor and the IEC languages. This allows for easy transition of portions of application
code from the 984LL environment to the IEC environment.
The fuzzy library contains EFBs for fuzzy logic.
The ANA_IO library is used to process analog values.
Functions (continued)
Libraries
EC Library
Extended Library
System Library
CLC and CLC_PRO Library
Communication Library
Diagnostics Library
LIB984 Library
Fuzzy Logic Library
Analog I/O Library
Functions (continued)
0
89
Schneider Electric
Modicon Momentum automation
platform 0
Concept programming software
(1) p = 0 in this position indicates english language, 1 indicates french language, 2 indicates
german language and 3 indicates spanish language.
References
Concept packages
Description License type Reference Weight
kg
Concept S Version 2.6 Single-station
372SPU4710
1
V26
–
Concept M Version 2.6 Single-station
372SPU4720
1
V26
–
Concept XL Version 2.6 Single-station
372SPU4740
1
V26
–
Group (3 stations)
372SPU4741
1
V26
–
Team (10 stations)
372SPU4742
1
V26
–
Site (> 10 stations)
372SPU4743
1
V26
–
Concept EFB Toolkit
Version 2.6
Single-station
332SPU47001V26
–
HVAC Function Blocks Library Site (> 10 stations)
372HVA16030V25
–
Concept package for exploitation and maintenance
Description License type Reference Weight
kg
Concept Application Loader Single-station
372SPU47701V26
–
Concept upgrades
Description License type Reference Weight
kg
Concept XL V x.x
to Concept XL V 2.6
Single-station 372ESS47401 –
Group (3 stations) 372ESS47403 –
Team (10 stations) 372ESS47410 –
Site (> 10 stations) 372ESS47400 –
Concept S V x.x
to Concept S V 2.6
Single-station 372ESS47101 –
Concept M V x.x
to Concept M V 2.6
Single-station 372ESS47201 –
Modsoft V x.x
to Concept XL V 2.6
Depends on number of users 372ESS48501 –
Concept EFB Toolkit
Vx.x to V 2.6
–372ESS47101 –
Documentation
Description Number of volumes Reference
(1)
Weight
kg
Concept Installation
Instructions
1840USE4920p–
Concept User Manual 3840USE4930p–
Concept IEC Block Library 13 840USE4940p–
Concept 984 LL Block Library 2840USE4960p–
Concept EFB Tool User
Manual
1840USE49501 –
References
90 Schneider Electric
Modicon Momentum automation
platform 0
ProWORX 32 programming software
ProWORX 32 programming software is a full-featured, Modicon PLC programming
software that is compatible with Windows platforms (98/NT/2000/XP) that gives you
the power to program all your Modicon controllers online or offline, manage your I/O
subsystems, and analyze your plant’s activity in real-time.
Some of the new ProWORX 32 features:
32-bit processing. With 32-bit processing, ProWORX 32 is an even more powerful
solution than its predecessors, ProWORX Plus and ProWORX NxT. 32-bit
processing lets you utilize the power of state-of-the-art operating systems for optimal
development and operational performance.
A comprehensive suite of tools. ProWORX 32 provides everything you will need
to start, configure, test and complete your project, quickly, reliably and professionally.
With its improved suite of standard utilities, ProWORX 32 is a virtual “one stop shop”
for your Automation Journey. No more searching on the web for special features or
functions, they’re all included to save you time and increase your productivity.
A powerful offer. In addition, ProWORX 32 will simplify and speed up your system
development and commissioning time with powerful diagnostics, easier integration,
and greater openness and flexibility.
Easier integration. Using standard Microsoft components for the basis of
ProWORX 32 opens up a wealth of user data. Import and export capabilities have
been enhanced to provide a variety of integration options for HMI and third party
devices, such as a built in “Alliance Tool” which allows users to create hardware
profiles for newly developed devices. The profiles can even be sent electronically to
Schneider Electric for inclusion in future product releases.
The familiar Windows-based programming environment means you spend less time
learning how to do things, and more time being productive. ProWORX uses familiar
Windows features like user-defined screens, drag-and-drop, cut and paste, search,
and global replace.
484 to 984 in one step! The most flexible conversion tools available in the automation
industry. That is the reputation ProWORX products have always enjoyed, and
ProWORX 32 is no exception. With the ability to convert from older project databases
to this latest tool, ProWORX 32 supports almost 30 years of PLC heritage.
.
Imagine the time and effort you could save by testing a new project with an existing
project while it is running live. Now you can with the Multiple Projects function of
ProWORX 32, even with two PLCs running simultaneously! Perform diagnostic
checks to validate interdependencies between your emulated project and your live
applications, all in real time, so you can go live with total confidence.
A powerful analysis tool, the Data Watch Window shows you information from your
plant in real-time, or logs it to disk for in-depth historical analysis later on. Easily get the
data you need to make informed, effective production decisions. View and edit data in
full page display, see trends and track data points against time in a spreadsheet, and
monitor any combinations of discrete and analog activities.
Save hours of painstaking effort with ProWORX 32’s I/O Drawing Generator, which
automatically creates wiring diagrams for the I/O cards defined in the Traffic Cop.
Generate necessary drawings all at once or just one card at a time – simply select an
address the I/O card uses with the Network Editor, then click the drawing button on the
Hardware Back Referencing panel to display the diagram, and if desired, save it as
an AUTOCAD-compatible.DXF file or print it.
Presentation
Windows environment
Conversion
Multiple projects
Intuitive Register Editor
I/O drawing generator
Presentation
91
Schneider Electric
Modicon Momentum automation
platform 0
ProWORX 32 programming software
With the Network Editor, ProWORX 32 reduces development time by using the same
commands and instructions for every controller. Simply cut, copy, and paste
networks from one platform to any other.
ProWORX 32 is first-class software with first-class program documentation. Use one
of the many standard templates to get started, and progress to assemble your own
custom documentation. For better references and easier-to-use documentation, we
have provided annotation down to the “Bit” level to allow longer comments and more
lines of text. Even simple things like using Windows O/S fonts to eliminate printer
issues demonstrates that every detail has been considered.
Find the controller you need fast and simplify network diagnostics with ProWORX
32's powerful Network Scan feature. Network Scan searches your Modbus or
Modbus Plus networks, then identifies and graphically displays each device found
and shows its status.
To effectively control your operation, you need to see your operation in action. The
built-in HMI allows you to build a simple representation of your application to
visualize the entire operation. With the “Data Watch Window”, you can see values in
real-time and perform “Data Logging” for later data analysis. The “Trending” tool is a
simple built-in chart recorder to help you visualize performance factors without
having to crunch hard data. And “Diagnostic Trace” helps to easily solve complicated
issues such as network element interdependencies.
Ensure that the I/O card you are configuring in the software matches the one on your
plant floor with ProWORX 32's graphical Traffic Cop. It displays I/O cards on your
screen the same way they look in real life, eliminating all confusion. To place a card,
just select it from the convenient drop down menu and then drag it into the controller
slot you want. To save even more time, the Traffic Cop automatically associates the
card's I/O points with a block of free addresses in your controller. Once configured,
manage your I/O with Pro WORX 32's complete documentation tools, with references
for each head, drop, rack, slot and address. And the Traffic Cop's graphical display
shows you at a glance that your I/O is healthy.
Presentation (continued)
Network editor
Program Documentation
Real-time network status
Powerful diagnostics
Advanced I/O management
Presentation (continued)
92 Schneider Electric
Modicon Momentum automation
platform 0
ProWORX 32 programming software
ProWORX 32 allows projects to be developed in a collaborative environment without
sacrificing control and security by utilizing the ProWORX 32 server as the central
repository for projects, the center for security, and the hub for communications. The
system administrator has total control over user accounts, user groups, passwords,
rights, and auditing policies and can grant access when and where needed.
The client/server relationship allows projects to be skillfully managed and controlled.
The server can be used to keep “Master” versions of PLC projects for editing (subject
to rights), while editing is achieved using the client. This can be done via a
standalone PC or even on the server since both client and server can reside on the
same PC.
The server has the capability to schedule software backups of the controller, detect
software modifications and store multiple versions. Even more powerful is the ability
to communicate from the client to the server using either Ethernet TCP/IP or Modbus
Plus.
The project emulator is a very powerful tool that will help save considerable time in
the design and testing of your system. It provides the ability to test projects prior to
running them in the PLC run-time environment to ensure your system will run at peak
efficiency immediately upon commissioning. Two emulators are provided that test
interdependent projects with one another, giving you complete confidence and
peace of mind before going live.
Want a shopping list for your PLC equipment? The Material List Generation function
automatically creates a list for the project, either online or offline, even taking into
account the contents of the Traffic Cop. Add prices and comments once the list is
generated, saving you time and insuring that all required components are fully
documented and identified.
Presentation (continued)
Client/Server Tools
Project Emulator
Material List Generation
Presentation (continued)
93
Schneider Electric
Modicon Momentum automation
platform 0
ProWORX 32 programming software
ProWORX Client/Server software
ProWORX packages
Description License type Reference Weight
kg
ProWORX 32 Server 372SPU78001PSEV –
Client/Server Suite 372SPU78001PSSV –
Offline/Online Client 372SPU78001PDEV –
Group (3 stations) 372SPU78001PSTH –
Team (10 stations) 372SPU78001PSTE –
Site (> 10 stations) 372SPU78001SITE –
Online Client 372SPU78101PONL –
ProWORX 32 Lite Offline/Online Client 372SPU71001PLDV –
Group (3 stations) 372SPU71001PLTH –
Team (10 stations) 372SPU71001PLTE –
Legacy Product
Upgrade to ProWORX 32
Client 372SPU78401LPUP –
Group (3 stations) 372SPU78401LPTH –
Team (10 stations) 372SPU78401LPTE –
Multi-station Incremental
Addition
372SPU78401SEAT –
Documentation
Description Language Reference Weight
kg
ProWORX 32 User Manuals English 372SPU78001EMAN –
French 372SPU78001FMAN –
German 372SPU78001DMAN –
Spanish 372SPU78001SMAN –
References
94 Schneider Electric
Presentation Modicon Momentum
automation platform 0
Aggressive environments protection
Optional conformal coating
If your control system needs to operate in a corrosive environment, selected
Momentum modules can be ordered with a conformal coating applied to components
of the product. Conformal coating will extend its life and enhance its environmental
performance capabilities.
Presentation
Mixed flowing gas (power on)
Standard Pollutant Parts/billion Momentum's performance
EIA 364-65
level III
CI
2
20 (±5) Meets the standard
NO
2
200 (±50) Exceeds standard (1250 parts/billion)
H
2
S100 (±20) Meets standard
ISA-S71.04
GX severe
CI
2
10 Exceeds standard (20 parts/billion)
NO
2
1250 Meets standard
H
2
S50 Exceeds standard (100 parts/billion)
SO
2
300 Meets standard
Humidity (operating)
Standard Concentration (%) Momentum's performance
IEC-68-2-3 93 @ 60 °C (140 °F) Meets standard
Salt mist (non-operating)
Standard Concentration (%) Momentum's performance
IEC 68-2-11 5 (±1) Exceeds standard (5.7%)
Fungus resistance
Standard Momentum's performance
MIL-I-46058C Designed to meet standard
Temperature cycling (operating)
Standard Cycles Momentum's performance
IEC 68-2-14 100 @ 0…60 °C (32…140 °F) Meets standard
Dust (non-operating)
Standard Pollutant Weight (%) Momentum's performance
EIA 364-TP91
(pending)
Silica 36 Meets standard
Calcite 29 Meets standard
Iron oxide 12 Meets standard
Alumina 8Meets standard
Gypsum 5Meets standard
Paper fiber 3Meets standard
Cotton fiber 3Meets standard
Polyester fiber 2Meets standard
Carbon black 1Meets standard
Human hair 0.5 Meets standard
Cigarette ash 0.5 Meets standard
95
Schneider Electric
References Modicon Momentum
automation platform 0
Aggressive environments protection
Optional conformal coating
This following is a list of Momentum products that are availability with the optional
conformal coating.
Note : Please note that a “C” is appended to the standard reference for those Momentum
products.
(1) Operating voltage 24 VDC.
References
Discrete I/O bases
Type of current Input voltage Modularity
(no. of points)
Conformity
EC 1131-2
Reference
Weight
kg
Discrete input bases 24 VDC 16 (1 x 16) Type 1 170ADI34000C 0.190
32 (2 x 16) Type 1 170ADI35000C 0.200
Type of current Output voltage Modularity
(no. of points)
Current per
output
Reference
Weight
kg
Discrete output bases
solid state, protected
24 VDC 16 (2 x 8) 0.5 A 170ADO34000C 0.210
32 (2 x 16) 0.5 A 170ADO35000C 0.210
Type of current Input
voltage
Output
voltage
Modularity
Input
Outputs, current Reference
Weight
kg
Discrete I/O bases 24 VDC
Type 1
24 VDC
protected
solid state
16 I (1 x 16) 16 O (2 x 8) 0.5 A 170ADM35010C 0.200
16 I (4 x 4) 8 O (2 x 4) 2 A 170ADM37010C 0.220
24 VDC
Type 1
24/230 VAC
20/115 VDC
relay
10 I (1 x 10) 8 O (2 x 4) 2 A 170ADM39030C
(1)
0.260
Analog I/O bases
Type Number of channels Ranges Reference
Weight
kg
Analog inputs 2 bits + sign 16 single-ended ± 5 V, ± 10 V, 4-20 mA 170AAI14000C 0.215
Analog outputs 15 bits +
sign
4, differential Pt 100, Pt 1000, NI 100
thermocouples B, E, J, K, N, R, S, T
170AAI52040C 0.215
8, differential ± 5 V, ± 10 V, 1-5 V± 20 mA, 4-20 mA 170AAI03000C 0.215
Analog outputs12 bits + sign 4 ± 10 V, 4-20 mA 170AAO92100C 0.215
Type of discrete and analog I/O bases Reference
Weight
kg
Inputs Outputs
4 differential analog inputs
13 bits + sign
± 5 V, ± 10 V, 1-5 V
± 20 mA, 4-20 mA
2 analog outputs
12 bits
0-20 mA
± 10 V
170AMM09000C 0.240
4 discrete inputs 24 VDC 2 discrete inputs 24 VDC-0,5 A
Communication adapters
Description Characteristics Reference Weight
kg
Ethernet TCP/IP network 10 M bit/s 170 ENT 110 02C 0.070
Modbus Plus network IEC format, non-redundant 170 PNT 110 01C 0.070
984 format, non-redundant 170 NEF 110 21C 0.070
Fipio bus Bus manager Premium 170 FNT 110 20C 0.070
INTERBUS Generation 3 (SUPI 2) 170 INT 110 00C 0.070
Generation 4 (SUPI 3, version 2) 170 INT 110 03C 0.070
Profibus DP 9.6 K bit/s to 12 M bit/s 170 DNT 110 00C 0.070
M1/M1E processor adapters
Memories Communication Port(s) Clock Speed Reference Weight
kg
256 Ko RAM, 256 Ko Flash 1 Modbus, 1 I/O Bus 32 MHz 171CCS76000C 0.042
512 Ko RAM, 256 Ko Flash 1 Modbus, 1 I/O Bus 32 MHz 171CCC76010C 0.042
544 Ko RAM, 512 Ko Flash 1 Ethernet, 1 I/O Bus 50 MHz 171CCC96020C 0.042
544 Ko RAM, 1 Mo Flash,
IEC Exec
1 Ethernet, 1 I/O Bus 50 MHz 171CCC96030C 0.042
Option adapters
Memories Reference Weight
kg
Modbus Plus network Single port, Time-of-Day (TOD) and battery backup 172PNN21022C 0.070
Modus link 2 x RS 232/RS 485 ports, Time-of-Day (TOD) and battery backup 172JNN21032C 0.070
170ADI3
p
000C
170AAI
pp
0
p
0C
521501
170ENT11002C
171CCC
pp
0
p
0
172PNN21022C
96 Schneider Electric
Presentation,
references
Modicon Momentum automation
platform 0
Enhanced grounding system
Due to new INTERBUS standards for electrical noise immunity, a number of
Momentum products have been updated to include the enhanced grounding system,
which is required to meet the revised electrical noise immunity standard (ability to
pass a 2.2 k VDC electrical fast transient burst test).
This grounding system includes a ground screw in the communication or M1/M1E
processor adapter, which is connected to a fixed standoff-ground nut on the printed
circuit board and to a standoff on selected Momentum I/O bases
Nota : This electrical noise immunity requirement applies only to systems that require INTERBUS
certification, version 2, and not to any other communication network that Momentum I/O currently
uses. The standard electrical fast transient test for Momentum is 500 VDC.
The following is a list of the Momentum modules that currently have been updated to
include the new grounding system:
bCommunication adapters.
bM1/M1E processor adapters and option adapters
bDiscrete and analog I/O bases
Momentum communication adapter ground screw
References
Range Description Reference See
page
Communication
adapters
Ethernet TCP/IP 10/100 M bits/s (V2) 170ENT11001 49
Ethernet TCP/IP 10 M bits/s (V1) 170ENT11002 49
INTERBUS SUPI 3 (V2) 170INT11003 57
Fipio bus (for Premium) (V2) 170FNT11001 55 / 96
M1/M1E processor
adapters
64 K, 1 Modbus, 20 MHz 171CCS70000 70
64 K, 1 Modbus, 32 MHz 171CCS70010 70
64 K, 2 Modbus, 20 MHz 171CCS78000 70
256 K, 1 Modbus, 1 I/O bus, 32 MHz 171CCS76000 70
512 K, 1 Modbus, 1 I/O bus, 32 MHz 171CCC76010 70
512 K, 2 Modbus, 32 MHz 171CCC78010 70
544 K, 1 Modbus, 1 Ethernet, 50 MHz 171CCC98020 70
544 K, 1 Ethernet, 1 I/O bus, 50 MHz 171CCC96020 70
544 K, IEC Exec, 1 Modbus, 1 Ethernet,
50 MHz
171CCC98030 70
544 K, IEC Exec, 1 Ethernet, 1 I/O bus,
50 MHz
171CCC96030 70
Option adapters Modbus Plus, single port 172PNN21022 77
Modbus Plus, dual redundant ports 172PNN26022 77
RS 232/RS 485 serial port 172JNN21032 77
Discrete input
bases
24 VDC 16 inputs 170ADI34000 19
24 VDC 32 inputs 170ADI35000 19
Discrete output
bases
24 VDC 16 solid state outputs 0.5 A 170ADO34000 19
24 VDC 32 solid state outputs0.5 A 170ADO35000 19
DC/AC 6 relay form “C” outputs 5 A 170ADO83030 19
Discrete I/O bases 24 VDC 16 inputs/16 outputs 0.5 A 170ADM35010 19
24 VDC 16 fast inputs/16 outputs 0.5 A 170ADM35011 19
24 VDC 16 inputs/16 outputs 0.5 A 170ADM35015 19
24 VDC 16 inputs wiring check/
12 outputs 0.5 A
170ADM39010 19
24 VDC 16 inputs/8 outputs 2 A 170ADM37010 19
12 to 60 VDC 16 inputs/16 outputs 0.5 A 170ADM85010 19
24 VDC 10 inputs/AC or DC/8 relay 2A 170ADM39030 19
170ARM37030 19
Analog input
bases
16 single-ended inputs 12 bits + sign 170AAI14000 34
8 differential inputs 15 bits + sign 170AAI03000 34
Discrete and
analog I/O bases
4 differential analog inputs/2 analog outputs
4 discrete inputs/2 discrete outputs
170AMM09000 34
170AMM09001 34
6 analog inputs/4 analog outputs
8 discrete inputs/8 discrete outputs
170ANR12090 34
170ANR12091 34
Specialty I/O
bases
High-speed counter base, 2 independent
counters 200 kHz max.
170AEC92000 42
I/O base with Modbus RS 485 communication
port and 120 VAC 6 inputs/3 outputs 0,5 A
170ADM54080 42
3
1
2
5
4
1Communication adapter cover
2I/O base
3Standard screw M3-6
4Male-female standoff
5Added standoff
97
Schneider Electric
References Modicon Momentum automation
platform 0
User Documentation
References
Description Language Reference Weight
kg
Momentum I/O bases user guide English 870USE00200 –
French 870USE00201 –
German 870USE00202 –
Spanish 870USE00203 –
High-Speed counter base
(170 AEC 920 00) user guide
English 870USE00800 –
French 870USE00801 –
German 870USE00802 –
M1/M1E processor adapters
and option adapter user guide
English 870USE10110 –
French 870USE10111 –
German 870USE10112 –
Spanish 870USE10113 –
INTERBUS communication adapters
user guide
English 870USE01000 –
French 870USE01001 –
German 870USE01002 –
Spanish 870USE01003 –
INTERBUS communication adapter
user guide
English 870USE00300 –
French 870USE00301 –
Profibus DP communication adapter
user guide
(includes the GSD configuration
software on 3.5" disk)
English 870USE00400 –
French 870USE00401 –
German 870USE00402 –
Modbus Plus communication adapter,
170 PNT Series user guide
English 870USE10300 –
French 870USE10301 –
German 870USE10302 –
Modbus Plus communication adapter,
170 NEF Series user guide
English 870USE11100 –
Fipio communication adapter
(170 FNT 110 00) user guide
English 870USE00500 –
French 870USE00501 –
German 870USE00502 –
Spanish 870USE00503 –
Fipio communication adapter
(170 FNT 110 01) user guide
English 870USE10500 –
French 870USE10501 –
German 870USE10502 –
Spanish 870USE10503 –
DeviceNet communication adapter
user guide
(includes the EDS configuration
software on 3.5" disk)
English 870USE10400 –
Fipio Bus / Fipway network
reference manual
English TSXDRFIPE –
French TSXDRFIPF –
German TSXDRFIPG –
Spanish TSXDRFIPS –
Modbus Plus network
planning and installation guide
English 890USE10000 –
French 890USE10001 –
German 890USE10002 –
Spanish 890USE10003 –
Modbus Plus network BM85 bridge
multiplexer user guide
English 890USE10300 –
Ethernet TCP/IP network
10BASE-T and 100BASE-TX
English 490USE13300 –
French 490USE13301 –
German 490USE13302 –
Spanish 490USE13303 –
Modbus/TCP/IP Ethernet communication
adapter user guide
English 870USE11400 –
French 870USE11401 –
German 870USE11402 –
Spanish 870USE11403 –
XMIT Function Block version 3.0
user guide
English 840USE11300 –
98 Schneider Electric
Technical information 0
Automation products certifications
In some countries, certification of certain electrical components is enforced by law.
A standard conformity certificate is then issued by the official organization. Each
certified product must carry approval symbols when enforced.
Use on board merchant navy vessels generally requires prior approval
(= certification) of an electrical device by certain marine classification authorities.
The table below shows the situation as of 01/06/2005 for certifications obtained or
pending from organizations for base PLCs. An overview of certificates for
Telemecanique products is available on our Internet web site:
www.telemecanique.com
Key Certification body Country
CSA Canadian Standards Association Canada
C-Tick Australian Communication Authority Australia
UL Underwriters Laboratories USA
Key Classification authority Country
ABS American Bureau of Shipping USA
BV Bureau Veritas France
DNV Det Norske Veritas Norway
GL Germanischer Lloyd Germany
GOST Institut de recherche Scientifique Gost Standardt C.I.S., Russia
LR Lloyd's Register United-Kingdom
RINA Registro Italiano Navale Italy
RMRS Register of Shipping C.I.S.
Product certifications
Certifications
C-Tick
Certified Hazardous
locations
Class 1 Div 2
(1)
Pending
certification UL CSA ACA SIMTARS GOST
USA Canada Australia Australia CEI, Russia US
Advantys STB FM
Advantys Telefast
ConneXium (2)
Lexium 05
Lexium 17D
Magelis iPC (3) UL
Magelis XBT G
Magelis XBT F/FC/H/P/E/HM/PM (4)
Magelis XBT N/R CSA/UL
Modicon Momentum FM (5)
Modicon
Premium
PL7 CSA
Unity CSA
Modicon
Quantum
Concept FM
Unity FM
Modicon TSX Micro
TBX
Twido (3) (2) CSA/UL (2)
Twin Line
(1) Hazardous locations: CSA 22.2 no. 213, certified products are suitable for use in Class I,
division 2, groups A, B, C and D or non-hazardous locations only.
(2) Depending on product, consult our site: www.telemecanique.com
(3) cULus north-american certification (Canada and US).
(4) Only XBT F/FC.
(5) Depending on product, see pages of characteristics in this catalog.
Local certifications
BG Germany TSXDPZ10D2A safety module (TSX Micro)
TSXPAY262/282 safety modules (Premium)
AS-Interface Europe TWDNOI10M3 master module (Twido)
TSXSAZ10 master module (TSX Micro)
TSXSAY100 / 1000 master modules (Premium)
TBXSAP10 Fipio bus/AS-Interface bus gateway
99
Schneider Electric
Technical information 0
Automation products certifications
Community regulations
The opening of European markets implies a harmonization of regulations in the
various European Union member states.
European Directives are documents used to remove obstacles to the free movement
of goods and their application is compulsory in all states of the European Union.
Member states are obliged to transcribe each Directive into their national legislation
and, at the same time, to withdraw any conflicting regulations.
The Directives, particularly those of a technical nature with which we are concerned,
only set objectives, called “general requirements”.
The manufacturer must take all necessary measures to ensure that his products
conform to the requirements of each Directive relating to his equipment.
As a general rule, the manufacturer affirms that his product conforms to the
necessary requirements of the Directive(s) by applying the e label to his product.
e marking is applied to Telemecanique products where relevant.
be marking on a product means that the manufacturer certifies that his product
conforms to the relevant European Directives; it is necessary in order that a product
which is subject to a Directive(s) can be marketed and freely moved within the
European Union.
be marking is intended solely for the national authorities responsible for market
regulation.
For electrical equipment, only conformity of the product to standards indicates that it
is suitable for use, and only a guarantee by a recognized manufacturer can ensure
a high level of quality.
One or more Directives, as appropriate, may apply to our products, in particular:
bThe Low Voltage Directive 72/23/EEC amended by Directive 93/68/EEC: e
marking under the terms of this Directive is compulsory as of 1 January 1997.
bThe Electromagnetic Compatibility Directive 89/336/EEC, amended by Directives
92/31/EEC and 93/68/EEC: e marking on the products covered by this Directive has
been compulsory since 1 January 1996.
The system designer must use devices external to the SCADA to protect
against active faults, which are not indicated and are judged to be dangerous
to the application.
This may require solutions from various different technologies such as mechanical,
electromechanical, pneumatic or hydraulic devices (for example, directly wiring a limit
switch and emergency stop switches to the coil of a movement control contactor).
Marine classification
Marine classification des authorities
Certified
Pending
certification ABS BV DNV GL LR RINA RMRS
USA France Norway Germany Unit.-Kingdom Italy C.I.S.
Advantys STB
Advantys Telefast
ConneXium (1)
Lexium 05
Lexium 17D
Magelis iPC
Magelis XBT G (2)
Magelis XBT F/FC/H/P/E/HM/PM
Magelis XBT-N/R (3) (3)
Modicon Momentum
Modicon
Premium
PL7
Unity (3)
Modicon
Quantum
Concept
Unity
Modicon TSX Micro
TBX
Twido (1) (1) (1)
Twin Line
(1) Depending on product, consult our site: www.telemecanique.com
(2) Except Magelis XBTG2110.
(3) Request for Marine certifications forecast 4thquarter 2004.
Community regulations
European directives
The significance of e marking
d
100 Schneider Electric
100
Schneider Electric
Product Reference Index
043509383. . . . . . . . 53
043509383. . . . . . . . 77
110XCA20300 . . . . . 70
110XCA20300 . . . . . 77
110XCA20400 . . . . . 70
110XCA20400 . . . . . 77
110XCA28201 . . . . . 70
110XCA28201 . . . . . 77
110XCA28202 . . . . . 70
110XCA28202 . . . . . 77
110XCA28203 . . . . . 70
110XCA28203 . . . . . 77
170. . . . . . . . . . . . . . 95
170AAI03000. . . . . . 34
170AAI03000. . . . . . 96
170AAI03000C . . . . 95
170AAI14000. . . . . . 34
170AAI14000. . . . . . 96
170AAI14000C . . . . 95
170AAI52040. . . . . . 34
170AAI52040C . . . . 95
170AAO12000 . . . . . 34
170AAO92100 . . . . . 34
170AAO92100C. . . . 95
170ADI34000. . . . . . 19
170ADI34000. . . . . . 96
170ADI34000C . . . . 95
170ADI35000. . . . . . 19
170ADI35000. . . . . . 96
170ADI35000C . . . . 95
170ADI54050. . . . . . 19
170ADI74050. . . . . . 19
170ADM35010. . . . . 19
170ADM35010. . . . . 96
170ADM35010C . . . 95
170ADM35011. . . . . 19
170ADM35011. . . . . 96
170ADM35015. . . . . 19
170ADM35015. . . . . 96
170ADM37010. . . . . 19
170ADM37010. . . . . 96
170ADM37010C . . . 95
170ADM39010. . . . . 19
170ADM39010. . . . . 96
170ADM39030. . . . . 19
170ADM39030. . . . . 96
170ADM39030C . . . 95
170ADM54080. . . . . 42
170ADM54080. . . . . 96
170ADM69051. . . . . 19
170ADM85010. . . . . 19
170ADM85010. . . . . 96
170ADO34000. . . . . 19
170ADO34000. . . . . 96
170ADO34000C . . . 95
170ADO35000. . . . . 19
170ADO35000. . . . . 96
170ADO35000C . . . 95
170ADO53050. . . . . 19
170ADO54050. . . . . 19
170ADO73050. . . . . 19
170ADO74050. . . . . 19
170ADO83030. . . . . 19
170ADO83030. . . . . 96
170AEC92000 . . . . . 42
170AEC92000 . . . . .96
170AMM09000 . . . . .34
170AMM09000 . . . . .96
170AMM09000C. . . .95
170AMM09001 . . . . .34
170AMM09001 . . . . .96
170ANR12090 . . . . .34
170ANR12090 . . . . .96
170ANR12091 . . . . .34
170ANR12091 . . . . .96
170ARM37030 . . . . .19
170ARM37030 . . . . .96
170BDM09000 . . . . .19
170BDM09000 . . . . .35
170BNO67101 . . . . .57
170BSM01600 . . . . .19
170CPS11100 . . . . .71
170DNT11000 . . . . .59
170ENT11001 . . . . .49
170ENT11001 . . . . .96
170ENT11002 . . . . .49
170ENT11002 . . . . .96
170FNT11000. . . . . .55
170FNT11001. . . . . .55
170FNT11001. . . . . .96
170INT11000 . . . . . .57
170INT11003 . . . . . .57
170INT11003 . . . . . .96
170INT12000 . . . . . .57
170LNT71000. . . . . .61
170MCI00700. . . . . .57
170MCI02010. . . . . .77
170MCI02036. . . . . .77
170MCI02080. . . . . .77
170MCI02110. . . . . .53
170MCI02120. . . . . .53
170MCI02120. . . . . .77
170MCI02136. . . . . .53
170MCI02180. . . . . .53
170MCI02180. . . . . .77
170MCI04110. . . . . .77
170MCI10001. . . . . .57
170NEF11021 . . . . .53
170NEF16021 . . . . .53
170PNT11020 . . . . .53
170PNT16020 . . . . .53
170XCP10000 . . . . .57
170XCP20000 . . . . .19
170XCP20000 . . . . .35
170XTS00100. . . . . .19
170XTS00100. . . . . .35
170XTS00200. . . . . .19
170XTS00200. . . . . .35
170XTS00301. . . . . .19
170XTS00301. . . . . .35
170XTS00401. . . . . .19
170XTS00401. . . . . .35
170XTS00501. . . . . .19
170XTS00501. . . . . .35
170XTS00601. . . . . .19
170XTS00601. . . . . .35
170XTS00701. . . . . .19
170XTS00701. . . . . .35
170XTS00801. . . . . .19
170XTS00801. . . . . .35
170XTS00900 . . . . . 57
170XTS01100 . . . . . 71
170XTS01200 . . . . . 71
170XTS02000 . . . . . 53
170XTS02000 . . . . . 77
170XTS02100 . . . . . 53
170XTS02100 . . . . . 70
170XTS02100 . . . . . 77
170XTS02200 . . . . . 77
170XTS04000 . . . . . 70
170XTS04000 . . . . . 77
170XTS04100 . . . . . 77
170XTS04200 . . . . . 77
170XTS06000 . . . . . 61
170XTS10000 . . . . . 19
170XTS10000 . . . . . 35
170XTS10000 . . . . . 42
170XTS10000 . . . . . 59
170XTS10000 . . . . . 61
170XTS12000 . . . . . 19
171CCC76010. . . . . 70
171CCC76010. . . . . 96
171CCC76010C . . . 95
171CCC78010. . . . . 70
171CCC78010. . . . . 96
171CCC96020. . . . . 70
171CCC96020. . . . . 96
171CCC96020C . . . 95
171CCC96030. . . . . 70
171CCC96030. . . . . 96
171CCC96030C . . . 95
171CCC98020. . . . . 70
171CCC98020. . . . . 96
171CCC98030. . . . . 70
171CCC98030. . . . . 96
171CCS70000. . . . . 70
171CCS70000. . . . . 96
171CCS70010. . . . . 70
171CCS70010. . . . . 96
171CCS76000. . . . . 70
171CCS76000. . . . . 96
171CCS76000C . . . 95
171CCS78000. . . . . 70
171CCS78000. . . . . 96
172JNN21032 . . . . . 77
172JNN21032 . . . . . 96
172JNN21032C. . . . 95
172PNN21022. . . . . 77
172PNN21022. . . . . 96
172PNN21022C . . . 95
172PNN26022. . . . . 77
172PNN26022. . . . . 96
332SPU47001V26. . 89
372ESS47101 . . . . . 89
372ESS47101 . . . . . 89
372ESS47201 . . . . . 89
372ESS47400 . . . . . 89
372ESS47401 . . . . . 89
372ESS47403 . . . . . 89
372ESS47410 . . . . . 89
372ESS48501 . . . . . 89
372HVA16030V25. . 89
372SPU47101V26. . 89
372SPU47201V26. . 89
372SPU47401V26. . 89
372SPU47411V26 . . 89
372SPU47421V26 . . 89
372SPU47431V26 . . 89
372SPU47701V26 . . 89
372SPU71001PLDV 93
372SPU71001PLTE. 93
372SPU71001PLTH. 93
372SPU78001DMAN . 93
372SPU78001EMAN . 93
372SPU78001FMAN . 93
372SPU78001PDEV 93
372SPU78001PSEV 93
372SPU78001PSSV 93
372SPU78001PSTE 93
372SPU78001PSTH 93
372SPU78001SITE . 93
372SPU78001SMAN . 93
372SPU78101PONL 93
372SPU78401LPTE. 93
372SPU78401LPTH. 93
372SPU78401LPUP 93
372SPU78401SEAT 93
424244739 . . . . . . . . 70
424244739 . . . . . . . . 77
490NAA27101 . . . . 53
490NAA27101 . . . . 77
490NAA27102 . . . . 53
490NAA27102 . . . . 77
490NAA27103 . . . . 53
490NAA27103 . . . . 77
490NAA27104 . . . . 53
490NAA27104 . . . . 77
490NAA27106 . . . . 53
490NAA27106 . . . . 77
490NAB00010 . . . . 53
490NAD91103 . . . . 59
490NAD91104 . . . . 59
490NAD91105 . . . . 59
490NOC00005 . . . . 83
490NOR00003 . . . . 83
490NOR00005 . . . . 83
490NOR00015 . . . . 83
490NOT00005 . . . . 83
490NTC00005 . . . . 83
490NTC00005U . . . 83
490NTC00015 . . . . 83
490NTC00015U . . . 83
490NTC00040 . . . . 83
490NTC00040U . . . 83
490NTC00080 . . . . 83
490NTC00080U . . . 83
490NTW00002. . . . 83
490NTW00002U . . 83
490NTW00005. . . . 83
490NTW00005U . . 83
490NTW00012. . . . 83
490NTW00012U . . 83
490NTW00040. . . . 83
490NTW00040U . . 83
490NTW00080. . . . 83
490NTW00080U . . 83
490USE13300 . . . . 97
490USE13301 . . . . 97
490USE13302 . . . . 97
490USE13303 . . . . 97
499NEH10410 . . . . 78
499NEH14100 . . . . 78
499NES18100. . . . . 81
499NES25100. . . . . 80
499NES27100. . . . . 81
499NMS25101 . . . . 80
499NMS25102 . . . . 80
499NOH10510 . . . . 78
499NOS27100 . . . . 81
499NSS25101. . . . . 80
499NSS25102. . . . . 80
499NSS27100. . . . . 81
499NTR10010. . . . . 79
499NTR10100. . . . . 79
840USE11300. . . . . 97
840USE4920p. . . . . 89
840USE4930p. . . . . 89
840USE4940p. . . . . 89
840USE49501. . . . . 89
840USE4960p. . . . . 89
870USE00200. . . . . 42
870USE00200. . . . . 97
870USE00201. . . . . 97
870USE00202. . . . . 97
870USE00203. . . . . 97
870USE00300. . . . . 97
870USE00301. . . . . 97
870USE00400. . . . . 97
870USE00401. . . . . 97
870USE00402. . . . . 97
870USE00500. . . . . 97
870USE00501. . . . . 97
870USE00502. . . . . 97
870USE00503. . . . . 97
870USE00800. . . . . 42
870USE00800. . . . . 97
870USE00801. . . . . 97
870USE00802. . . . . 97
870USE01000. . . . . 97
870USE01001. . . . . 97
870USE01002. . . . . 97
870USE01003. . . . . 97
870USE10110. . . . . 97
870USE10111. . . . . 97
870USE10112. . . . . 97
870USE10113. . . . . 97
870USE10300. . . . . 97
870USE10301. . . . . 97
870USE10302. . . . . 97
870USE10400. . . . . 97
870USE10500. . . . . 97
870USE10501. . . . . 97
870USE10502. . . . . 97
870USE10503. . . . . 97
870USE11100. . . . . 97
870USE11400. . . . . 97
870USE11401. . . . . 97
870USE11402. . . . . 97
870USE11403. . . . . 97
890USE10000. . . . . 97
890USE10001. . . . . 97
890USE10002. . . . . 97
890USE10003. . . . . 97
890USE10300. . . . . 97
900NAD21110 . . . . 77
101
Schneider Electric
Product Reference Index
990NAD21110 . . . . 53
990NAD21130 . . . . 53
990NAD21130 . . . . 77
990NAD21810 . . . . 53
990NAD21830 . . . . 53
990NAD21910 . . . . 53
990NAD21930 . . . . 53
990NAD23000 . . . . 53
990NAD23000 . . . . 77
990NAD23010 . . . . 53
990NAD23010 . . . . 77
990NAD23011 . . . . 53
990NAD23011 . . . . 77
990NAD23020 . . . . 53
990NAD23021 . . . . 53
990NAD23022 . . . . 53
ASMBKT085. . . . . . 53
ASMBKT085. . . . . . 77
ASMBKT185. . . . . . 77
CER001 . . . . . . . . . 19
CER001 . . . . . . . . . 35
KAB3225LI . . . . . . . 57
KABPROFIB. . . . . . 59
TCSESU051F0. . . . 82
TSXDRFIPE . . . . . . 97
TSXDRFIPF . . . . . . 97
TSXDRFIPG . . . . . . 97
TSXDRFIPS . . . . . . 97
TSXFPACC12 . . . . 55
TSXFPACC14 . . . . 55
TSXFPACC2 . . . . . 55
TSXFPACC4 . . . . . 55
TSXFPCC100. . . . . 55
TSXFPCC200. . . . . 55
TSXFPCC500. . . . . 55
TSXIBSCA100 . . . . 57
TSXIBSCA400 . . . . 57
TSXPBSCA100 . . . 59
TSXPBSCA400 . . . 59
XZCC12FCM50B . . 82
XZCC12FDM50 . . . 82
XZCP1164L . . . . . . 82
XZCP1264L . . . . . . 82
MKTED205061EN
August 2005
Schneider Electric Industries SAS
Headquarters
89, bd Franklin Roosevelt
F - 92506 Rueil Malmaison Cedex
http://www.schneider-electric.com
Owing to changes in standards and equipment, the characteristics
given in the text and images in this document are not binding until
they have been confirmed with us.
Production : Schneider Electric Industries
Photos : Schneider Electric Industries
Printed by :
Headquarters
89, bd Franklin Roosevelt
F - 92506 Rueil Malmaison Cedex
http://www.schneider-electric.com
Owing to changes in standards and equipment, the characteristics
given in the text and images in this document are not binding until
they have been confirmed with us.
Production : Schneider Electric Industries
Photos : Schneider Electric Industries
Printed by :
