Data Sheet SMLP3 Series PICOLEDTM-RGB SMLP34RGB1W SMLP36RGB1W 6pin type 15100604 1.5x1.0mmt=0.2mm 4pin type 10100404 1.0x1.0mmt=0.2mm Features The smallest 3 color type LED in the world PICOLEDTM-RGB 4pin, 6pin types available R G B Color Type Low height contributes to the improvement of color mixture Investigated Aug. 2009 Specifications Absolute Maximum Ratings (Ta25) Electrical and Optical Characteristics (Ta25) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength D Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Min.*2 Typ. Max.*2 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr() Tstg() Typ.(V) IF(mA) (A) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Part No. InGaN on SiC SMLP34RGB1W (3 colors, 4 terminals) AlGaInP on GaAs InGaN on SiC SMLP36RGB1W (3 colors, 6 terminals) 3.0 Blue Green - 100*1 20 5 -30 to +85 -40 to +100 Red Blue Green AlGaInP on GaAs - 1 20 5 100* -30 to +85 465 470 475 520 527 535 2.1 620 624 3.0 465 5 3.1 -40 to +100 3.1 Red 100 5 5 100 5 2.1 9 18 22 45 629 14 28 470 475 9 18 520 527 535 22 45 620 624 629 14 28 5 5 5 5 1:Duty1/20, 1ms 2:Reference Dimensions Recommended Solder Pattern SMLP34 SMLP34 1 0.6 30 Anode mark 0.45 0.4 0.45 10 R G, B 30 40 0.45 Terminal B 60 50 0 RELATIVE INTENSITY (%) G, B 30 20 10 0 10 20 40 90 100 50 0 90 100 50 RELATIVE INTENSITY (%) G SCANNING ANGLE(deg) Directivity (deg) B R 30 0 50 10 0 10 20 R G, B 30 40 50 60 60 80 50 20 40 50 70 RELATIVE INTENSITY(%) RELATIVE INTENSITY (%) 90 100 70 70 80 80 90 100 50 0 50 RELATIVE INTENSITY(%) RELATIVE INTENSITY (%) 0.4 0.45 0.45 0.2 0.45 0.08 1.0 0.6 60 80 90 100 60 80 SMLP36 B 40 70 50 50 60 R G R, B 30 50 X' - Y' 70 G 20 70 R G, B 30 40 0.4 10 SMLP36 Anode 0.45 0 RELATIVE INTENSITY(%) SCANNING ANGLE(deg) Directivity (deg) X-Y G B R 1.5 10 80 90 100 50 20 60 70 RELATIVE INTENSITY(%) G SMLP36 30 40 50 0.45 R R 80 0.4 Cathode G B 50 60 90 100 SCANNING ANGLE(deg) Directivity (deg) X' - Y' 20 70 0.2 0.4 0 80 10 50 R 20 40 Cathode mark 0.92 SCANNING ANGLE(deg) Directivity (deg) X-Y G B R (0.08) 1 G B Viewing Angle SMLP34 Cathode G 0.25 R 0.25 B Anode Tolerance : 0.1 unit : mm unit : mm PICOLEDTM is ROHM's pending trademark. www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.05 - Rev.A 90 100 SMLP3 Series Electrical Characteristics Curves Forward Current-Forward Voltage Ta=25C FORWARD CURRENTIF (mA) 100 SMLP34RGB1W(R) SMLP36RGB1W(R) SMLP34RGB1W(G) SMLP36RGB1W(G) SMLP34RGB1W(B) SMLP36RGB1W(B) 10 1 2.0 2.5 3.0 FORWARD VOLTAGE VF (V) 3.5 Luminous Intensity-Atmosphere Temperature IF=20mA RELATIVE LUMINOUS INTENSITY (a.u.) 1.6 1.4 SMLP34RGB1W(R) SMLP36RGB1W(R) SMLP34RGB1W(G,B) SMLP36RGB1W(G,B) 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURETa (C) RELATIVE LUMINOUS INTENSITY (a.u.) Luminous Intensity-Forward Current Ta=25C 4 SMLP34RGB1W(R) SMLP36RGB1W(R) SMLP34RGB1W(G,B) SMLP36RGB1W(G,B) 3 2 1 0 0 5 10 15 FORWARD CURRENTIF (mA) 20 Derating MAXIMUM FORWARD CURRENT (mA) 30 SMLP34RGB1W SMLP36RGB1W 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURETa (C) www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.05 - Rev.A SMLP3 Series Rank Reference of Brightness SMLP34RGB Package size (mm) Mini-mold Chip LEDs 1010 1510 Ta=25C, IF5mA Height (mm) 0.2 Luminous Intensity (mcd) Emitting Color Blue Green Red A B 9 to 18 18 to 36 22 to 36 C D E 9 to 18 18 to 36 36 to 56 14 to 28 F 9 to 18 18 to 36 56 to 90 G H J 9 to 18 18 to 36 22 to 36 K SMLP36RGB Package size (mm) Mini-mold Chip LEDs 1010 1510 L 9 to 18 18 to 36 36 to 56 28 to 56 M 9 to 18 18 to 36 56 to 90 Ta=25C, IF5mA Height (mm) 0.2 Luminous Intensity (mcd) Emitting Color Blue Green Red A B 9 to 18 18 to 36 22 to 36 C D E 9 to 18 18 to 36 36 to 56 14 to 28 F 9 to 18 18 to 36 56 to 90 G H J 9 to 18 18 to 36 22 to 36 K L 9 to 18 18 to 36 36 to 56 28 to 56 M 9 to 18 18 to 36 56 to 90 Part No. Explanation Brightness rank (At three color lighting simultaneously <for white LED>) S M L Series name P 3 4 Package name R G B 1 W 3 Terminal Type Emitting Color R Red:624nm A Special Code Resin Color Taping Specifications W MilkyWhite 3 Cathode at sprocket hole side G Green:527nm B Blue:470nm Brightness rank (At three color lighting simultaneously <for white LED>) S M L Series name P 3 6 Package name R G B 1 W 3 Terminal Type Emitting Color R Red:624nm A Special Code Resin Color Taping Specifications W MilkyWhite 3 Cathode at sprocket hole side G Green:527nm B Blue:470nm Concerning the Brightness rank * Please refer to the rank chart above for luminous intensity classification. * Part name is individual for each rank. * When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.05 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A