1.27 mm pitch connector Cable-side IDC type female connector PCR-E( )F( )+ For cable IDC Configuration of product Part No. PCR-E ( ) F( )+ Series name No. of contacts: 20, 28, 36, 50, 68, 80, or 96 Cable sizes for reference purposes (In case the cable sheath is made of PVC resin) F : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.8-1 mm. For loose wire. FA : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.5-0.65 mm. For loose wire. FB: AWG#30(7 / 0.1). Outside diameter of wire is 0.5-0.65 mm. For loose wire. FC: AWG#28(7 / 0.127) or AWG#30(1 / 0.254). For flat cable, t = 1.0 mm MAX. (See Note #1) FD: AWG#30(7 / 0.1). For flat cable, t = 1.0 mm MAX. (See Note #1) FH: AWG#32(7 / 0.08). Outside diameter of wire is 0.35-0.5 mm. For loose wire. (See Note #2) FJ : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.65-0.8 mm. For loose wire. (See Note #2) FK: AWG#30(7 / 0.1). Outside diameter of wire is 0.65-0.8 mm. For loose wire. (See Note #2) A B POS.#2 C POS.#1 7.3 1.27 Form of 96-contact connector 15 D Part No. is marked on the opposite surface. TM 7 HONDA is marked on the opposite surface. 15.2 Form of 96-contact connector Except of 50-contact connector 12.7 C Note 1: FC is not available for 96-contact connector. FD is not available for 20, 80, or 96-contact connectors. Note 2: FH is available only for 68-contact connector. FJ is available for 28, or 96-contact connectors. FK is available only for 96-contact connector. Dimensions Cable housing for loose wires Part No. PCR-E20F( )+ PCR-E28F( )+ A 21.65 B 13.35 C 11.43 D 16.25 26.7 18.43 16.51 21.33 PCR-E36F( )+ PCR-E50F( )+ 31.8 23.51 21.59 26.41 40.7 32.4 30.48 35.3 Shell Spacer PCR-E68F( )+ PCR-E80F( )+ 52.1 43.83 41.91 46.73 59.7 51.45 49.53 54.35 Cable housings PCR-E96F( )+ 69.9 61.61 59.69 64.51 Components Contacts Insulator Cable housing for flat cable Mating connectors: PCR-E series PCB-side right-angle through hole type or SMT type connector PCR-E series PCB-side straight through hole type or SMT type connector Tool: (Refer to page Tool-12) Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others