G2R-1-SNDI DC24(S) - OMRON

General-purpose Relay G2RS 1

General-purpose Relay

G2RS

Slim and Space-saving Power Plug-in Relay

• Lockable test button models now available.

• Built-in mechanical operation indicator.

• Provided with nameplate.

• AC type is equipped with a coil-disconnection self-diagnostic

function (LED type).

• High switching power (1-pole: 10 A).

• Environment-friendly (Cd, Pb free).

• Wide range of Sockets also available.

Model Number Structure

■Model Number Legend

1. Relay Function

Blank: General-purpose

2. Number of Poles

1: 1 pole

2: 2 poles

3. Contact Form

Blank: SPDT

4. Contact Type

Blank: Single

5. Terminals

S: Plug-in

6. Classification

Blank: General-purpose

N: LED indicator

D: Diode

ND: LED indicator and diode

NI: LED indicator with test button

NDI: LED indicator and diode with test button

7. Rated Coil Voltage

Ordering Information

■List of Models

G2R - - -

1234 56 7

Classification Enclosure

rating

Coil ratings Contact form

SPDT DPDT

Plug-in terminal General-purpose Unsealed AC/DC G2R-1-S G2R-2-S

LED indicator G2R-1-SN G2R-2-SN

LED indicator with test button G2R-1-SNI G2R-2-SNI

Diode DC G2R-1-SD G2R-2-SD

LED indicator and diode G2R-1-SND G2R-2-SND

LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI

Rated coil voltage

Note: When ordering, add the rated coil voltage and "(S)" to the model number. Rated coil voltages are given in the coil ratings table.

Example: G2R-1-S 12 VDC (S) New model

2General-purpose Relay G2RS

■Accessories (Order Separately)

Connecting Sockets

Note: Use of the P2CM Clip & Release Lever is recommended to ensure stable mounting.

Accessories for Terminal Socket (Option)

Mounting Tracks

*Used to mount several P2R-05A and P2R-08A Connecting Sockets side by side.

Specifications

■Coil Ratings

* The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of ±10%.

Applicable Relay model Track/surface-mounting Socket Back-mounting Socket

Rise-up terminal Screwless clamp

terminal

Screw

terminal

Terminals Model

1 pole

G2R-1-S(N)(D)(ND)(NI)(NDI)

• P2RF-05-ESS (See note.)

(P2CM-ESS (option))

• P2RF-05S (See note.)

(P2CM-S (option))

• P2RF-05-E

• P2RF-05

PCB terminals P2R-05P, P2R-057P

Solder terminals P2R-05A

2 poles

G2R-2-S(N)(D)(ND)(NI)(NDI)

• P2RF-08-ESS (See note.)

(P2CM-ESS (option))

• P2RF-08S (See note.)

(P2CM-S (option))

• P2RF-08-E

• P2RF-08

PCB terminals P2R-08P, P2R-087P

Solder terminals P2R-08A

Rise-up terminal

(P2RF-05-ESS, P2RF-08-ESS)

Screwless clamp terminal

(P2RF-05S, P2RF-08S)

Clip & Release Lever P2CM-ESS (1pcs=1 bag of 10 pcs) P2CM-S

Socket Bridge ---- P2RM-SR (for AC), P2RM-SB (for DC)

Nameplate PYC-TR R99-11 Nameplate for MY

Applicable Socket Description Model

Track-connecting Socket Mounting track 50 cm (l) x 7.3 mm (t): PFP-50N

1 m (l) x 7.3 mm (t): PFP-100N

1 m (l) x 16 mm (t): PFP-100N2

End plate PFP-M

Spacer PFP-S

Back-connecting Socket Mounting plate P2R-P*

Rated voltage Rated current* Coil

resistance*

Coil inductance (H)

(ref. value)

Must

operate

voltage

Must

release

voltage

Max.

voltage

Power

consumption

(approx.)

50 Hz 60 Hz Armature

OFF

Armature

% of rated voltage

AC 24 V 43.5 mA 37.4 mA 253 Ω0.81 1.55 80% max. 30% max. 110% 0.9 VA at 60 Hz

110 V 9.5 mA 8.2 mA 5,566 Ω13.33 26.83

120 V 8.6 mA 7.5 mA 7,286 Ω16.13 32.46

230 V 4.4 mA 3.8 mA 27,172 Ω72.68 143.90

240 V 3.7 mA 3.2 mA 30,360 Ω90.58 182.34

Rated voltage Rated current* Coil

resistance*

Coil inductance (H)

(ref. value)

Must

operate

voltage

Must

release

voltage

Max.

voltage

Power

consumption

(approx.)

Armature

OFF

Armature

% of rated voltage

DC 6 V 87.0 mA 69 Ω0.25 0.48 70% max. 15% min. 110% 0.53 W

12 V 43.2 mA 278 Ω0.98 2.35

24 V 21.6 mA 1,113 Ω3.60 8.25

48 V 11.4 mA 4,220 Ω15.2 29.82

General-purpose Relay G2RS 3

■Contact Ratings

Note: P level: λ60 = 0.1 x 10-6/operation

■Characteristics

Note: Values in the above table are the initial values.

*4,000 VAC, 50/60 Hz for 1 minute when the P2R-05A or P2R-08A Socket is mounted.

■Approved Standards

UL 508 (File No. E41643)

CSA 22.2 No.0, No.14

(File No. LR31928)

IEC/VDE (EN61810)

Number of poles 1 pole 2 poles

Load Resistive load

(cosφ = 1)

Inductive load

(cosφ = 0.4; L/R = 7 ms)

Resistive load

(cosφ = 1)

Inductive load

(cosφ = 0.4; L/R = 7 ms)

Rated load 10 A at 250 VAC;

10 A at 30 VDC

7.5 A at 250 VAC;

5 A at 30 VDC

5 A at 250 VAC;

5 A at 30 VDC

2 A at 250 VAC; 3 A at

30 VDC

Rated carry current 10 A 5 A

Max. switching voltage 440 VAC, 125 VDC 380 VAC, 125 VDC

Max. switching current 10 A 5 A

Max. switching power 2,500 VA,

300 W

1,875 VA,

150 W

1,250 VA,

150 W

500 VA,

90 W

Failure rate (reference value) 100 mA at 5 VDC 10 mA at 5 VDC

Item 1 pole 2 poles

Contact resistance 100 mΩ max.

Operate (set) time 15 ms max.

Release (reset) time AC: 10 ms max.; DC: 5 ms max.

(w/built-in diode: 20 ms max.)

AC: 15 ms max.; DC: 10 ms max.

(w/built-in diode: 20 ms max.)

Max. operating

frequency

Mechanical: 18,000 operations/hr

Electrical: 1,800 operations/hr (under rated load)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength 5,000 VAC, 50/60 Hz for 1 min between coil and

contacts*;

1,000 VAC, 50/60 Hz for 1 min between contacts of

same polarity

5,000 VAC, 50/60 Hz for 1 min between coil and contacts*;

3,000 VAC, 50/60 Hz for 1 min between contacts of different polarity

1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity

Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)

Malfunction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)

Shock resistance Destruction: 1,000 m/s2

Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized

Endurance Mechanical: AC coil: 10,000,000 operations min.;

DC coil: 20,000,000 operations min. (at 18,000 operations/hr)

Electrical: 100,000 operations min. (at 1,800 operations/hr under rated load) (DC coil type)

Ambient temperature Operating: –40°C to 70°C (with no icing or condensation)

Ambient humidity Operating: 5% to 85%

Weight Approx. 21 g

Model Contact

form

Coil ratings Contact ratings Opera-

tions

G2R-1-S SPDT 5 to 110 VDC

5 to 240 VAC

10 A, 30 VDC (resistive)

10 A, 250 VAC (general use)

TV-3 (NO contact only)

6 x 103

G2R-2-S DPDT 5 A, 30 VDC (resistive)

5 A, 250 VAC (general use)

TV-3 (NO contact only)

6 x 103

Model Contact

form

Coil ratings Contact ratings Opera-

tions

G2R-1-S SPDT 5 to 110 VDC

5 to 240 VAC

10 A, 30 VDC (resistive)

10 A, 250 VAC (general use)

TV-3 (NO contact only)

6 x 103

G2R-2-S DPDT 5 A, 30 VDC (resistive)

5 A, 250 VAC (general use)

TV-3 (NO contact only)

6 x 103

Contact

form

Coil ratings Contact ratings Operations

1 pole 6, 12, 24, 48 VDC

24, 110, 120, 230,

240 VAC

5 A, 440 VAC (cosφ = 1.0)

10 A, 250 VAC (cosφ = 1.0)

10 A, 30 VDC (0 ms)

100 x 103

2 poles 6, 12, 24, 48 VDC

24, 110, 120, 230,

240 VAC

5 A, 250 VAC (cosφ =1.0)

5 A, 30 VDC (0 ms) 100 x 103

Number of

poles

Coil ratings Contact ratings Operations

1 pole 5 to 110 VDC

5 to 240 VDC

10 A, 250 VAC (general use)

7.5 A, 250 VAC (PF0.4)

10 A, 30 VDC (resistive)

5A, 30VDC (L/R=7ms)

100 x 103

2 poles 5 to 110 VDC

5 to 240 VDC

5 A, 250 VAC (general use)

2 A, 250 VAC (PF0.4)

5 A, 30 VDC (resistive)

3A, 30VDC (L/R=7ms)

100 x 103

4General-purpose Relay G2RS

Engineering Data

Maximum Switching Power

Plug-in Relays

Endurance

Plug-in Relays

Ambient Temperature vs Maximum Coil Voltage

100

0.1 1 10 100 1000

100

0.11 10 100 1000

G2R-1-S

Switching current (A)

Switching voltage (V)

G2R-2-S

Switching voltage (V)

Switching current (A)

AC inductive load

(cosφ = 0.4) AC resistive

load

DC resistive

load

DC inductive load

(L/R = 7 ms)

AC inductive load

(cosφ = 0.4) AC resistive

load

DC resistive

load

DC inductive load

(L/R = 7 ms)

5,000

1,000

500

100

5,000

1,000

500

100

10,000

G2R-1-S

Endurance (x103 operations)

Switching current (A)

G2R-2-S

Switching current (A)

30-VDC inductive load (L/R = 7ms)

Endurance (x103 operations)

250-VAC/30-VDC

resistive load

250-VAC inductive load

(cosφ = 0.4)

250-VAC/30-VDC

resistive load

250-VAC

inductive load

(cosφ = 0.4)

Ambient temperature (°C)

Note: The maximum voltage refers to the maximum

value in a varying range of operating power

voltage, not a continuous voltage.

Maximum voltage (%)

DC coil

AC coil

General-purpose Relay G2RS 5

Technical and Environmental

Properties

Typical information for reference only

The following data is provided as experimental and/or calculated

data for reference only. These fall under the category of typical

behaviour and the operation of individual relays will vary according to

the exact operating conditions

Multiple Contact DC Switching Capacity

Switching capacity of DC resistive load

Load Reduction Factor

For AC inductive loads (such as solenoids, contactor coils, etc.) the

reduction factor corresponding to cos(p.f.) (cosine of power factor) is

multiplied by the rated current in order to identify the maximum allow-

able current. This approximation is not valid for loads with high inrush

currents such as electric motors or fluorescent lamps.

Properties 1-Pole and 2 Pole Model

Tracking Resistance Base 250

Environmental Protection RT 1

Flammability Class Base, Insulator, Spool

Case, Indicator,

Pushbutton

UL 94V-0

UL 94V-2

Pollution degree 2

Creepage Distance 8 mm

Clearance Distance 8 mm

Contact Material AgSnIn

Typical Operate / Release times 1 pole model 2 pole model

AC Type (operate / release time) 6 / 8 ms 6 / 10 ms

DC Type (operate / release time) 12 / 4 ms 11 / 15 ms

Switching Current (A)

2 contacts

in series

0.1

G2R-1S

G2R-2-S

20 40 60 80 100 120 140 160 180 200 220

Switching Voltage (Vdc)

Switching Current (A)

Cos(p.f.)

1 0.8 0.6 0.4 0.2

0.8

0.6

0.4

6General-purpose Relay G2RS

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Relays with Plug-in Terminals

SPDT Relays

DPDT Relays

G2R-1-S, G2R-1-SN, G2R-1-SNI

G2R-1-SD, G2R-1-SND, G2R-1-SNDI Terminal Arrangement/Internal Connections

(Bottom View)

234

DC24V

201

0.5 4.75

7.5

17.5

5.25.2

35.5 max.

29 max. 13 max.

G2R-1-SND, G2R-1-SNDI (DC)

G2R-1-S G2R-1-SD (DC)

G2R-1-SN, G2R-1-SNI (AC) G2R-1-SN, G2R-1-SNI (DC)

524

G2R-2-S, G2R-2-SN, G2R-2-SNI

G2R-2-SD, G2R-2-SND, G2R-2-SNDI Terminal Arrangement/Internal Connections

(Bottom View)

G2R-2-SND, G2R-2-SNDI (DC)

G2R-2-S G2R-2-SD (DC)

G2R-2-SN, G2R-2-SNI (AC) G2R-2-SN, G2R-2-SNI (DC)

0.5

2.5

2.4

19.4

29 max.

35.5 max.

13 max.

6.2

7.4

8.9

234

765

234

567

234

765

234

765

234

765

General-purpose Relay G2RS 7

Track/Surface Mounting Sockets

Accessories for P2RF-@-ESS

Clip and Release Lever

P2CM-ESS

Terminal Arrangement

(Top View)

A1 A2

42.5

34.1

7.6

5.2

15.6

20.6

6 dia.

3.2 dia.

77.6

3.5

8.5

9.25

Option (with Clip and

Release Lever)

P2RF-05-ESS

Standard model

Terminal Arrangement

(Top View)

A1 A2

42.5

35.1

20.6

6 dia.

3.2 dia.

7.6

15.6

77.6

8.5

3.5

9.25

Option (with Clip and

Release Lever)

Standard model

P2RF-08-ESS

34.4

37.1

15.6

4.5

14.5

8.4

2.1

13.2

21.7

19.7

22.9

5.8

8General-purpose Relay G2RS

Accessories for P2RF-@-S

Socket Bridge Clip and Release Lever

32.6

27.6

22.6

24.5

35.4

28.5

32.6

(5.3)

92.0 max.

18.0 max.

38.2 max.

36.5 max.

Standard model Option (with ejector and

label attached)

P2RF-05-S Terminal Arrangement

(Top View)

A1 A2

32.6

27.6

22.6

24.5

35.4

(3.4)

28.6

32.6

(5.3)

92.0 max.

18.0 max.

38.2 max.

36.5 max.

Standard model Option (with ejector

and label attached)

P2RF-08-S

Terminal Arrangement

(Top View)

A1 A2

914

Insulating coating

1.2 dia. conductor (See note 1.)

16.8 40.35

General-purpose Relay G2RS 9

39.5±0.1

P2RF-05

P2RF-08

35.5

19.5

30±0.05

35.5

19.5

30±0.05

P2RF-05-E

39.5

35.5

11.5

(11)

(12)

(14)

(A1)

(A2)

39.5±0.1

21.5

39.5

35.5

11.5

P2RF-08-E

(A1)

(A2)

(21)

(22)

(24)

(11)

(12)

(14)

3.2-dia.

hole

P2RF-05

P2RF-08

Five, M3.5 x 8

19.5 max.

4-dia. holes

30 max.

54 max.

4.2-dia. hole

71.5 max.

19.5 max.

Eight, M3.5 x 8

4-dia. holes

30 max.

54 max.

4.2-dia. hole

P2RF-05-E

3.2-dia.

hole

Five, M3.5×7

85.5 max.

16.0 max.

48 max.

Note: Pin numbers in parentheses apply to DIN standard.

61 max.

Eight, M3×8

3.5-dia. hole

16.0 max.

48.0 max.

61.0

max.

P2RF-08-E

Terminal Arrangement

(Top View)

Mounting Holes

(for Surface Mounting)

Terminal Arrangement

(Top View)

Mounting Holes

(for Surface Mounting)

M3 or

3.5-dia.

hole

M3 or

3.5-dia.

hole

3.5-dia.

hole

85.5

max.

M3 or 3.2-dia.

hole

M3 or 3.2-dia.

hole

Terminal Arrangement

(Top View)

Mounting Holes

(for Surface Mounting)

Terminal Arrangement

(Top View)

Mounting Holes

(for Surface Mounting)

71.5 max.

10 General-purpose Relay G2RS

Mounting Height of Relay with Track/Surface Mounting Sockets

Back-connecting Sockets

P2RF-@P2RF-@-E

67.0 70.5

66.5 62.0

28.6

65.0

(5.30)

P2RF-@-S P2RF-@-ESS

72.0

70.6 74.6

147

4.5

3.5

1.2

1.5

4.5

0.3

2.8

1.5

7.5

(4.3)

(5)

P2R-05P (1-pole) 14.5 max.

35.5 max.

Tolerance: ±0.1

Mounting Holes

P2R-08P (2-pole)

36.5 max.

Terminal plate thickness: 0.3

14.5 max.

35.5 max.

Eight, 1.3-dia. holes

Terminal Arrangement

(Bottom View)

Mounting HolesTerminal Arrangement

(Bottom View)

Five,

1.6-dia.

holes

36.5 max.

General-purpose Relay G2RS 11

Mounting Height of Relay with Back-connecting Sockets

1.2

0.3

6.7

3.8

16.7 5

1.2

0.3

2.8

2.6

7.5

13.6±0.1

30.5±0.2

1.5

P2R-05A (1-pole)

Panel Cutout

P2R-08A (2-pole)

Five, 3 x 1.8-dia. holes

36.5 max.

Terminal plate thickness: 0.3

14.5 max.

35.5 max.

36.5 max.

Terminal plate thickness: 0.3

14.5 max.

35.5 max.

Eight, 3 x 1.2-dia. holes

Terminal Arrangement

(Bottom View)

Recommended thickness of

the panel is 1.6 to 2.0 mm

P2R-057P

P2R-087P

4.5±0.1 15±0.1

4±0.1

6±0.1

7±0.1

7.5

(8.1)

29.6

0.7

8.9

8.7

16.4

10.4

7.4

29.1

7.5

16.4

110.4

7.4

14 max.

37 max.

41 max.

14 max.

37 max.

41 max.

Mounting HolesTerminal Arrangement

(Bottom View)

Mounting HolesTerminal Arrangement

(Bottom View)

Eight,

1.3-dia.

holes

Five,

1.6-dia.

holes

44.5 38.0

G2R-@7P

G2R Relay G2R Relay

P2R-_P

Socket

P2R-_A

Socket

G2R-@P G2R-@A

47.5

12 General-purpose Relay G2RS

Mounting Tracks

End Plate Spacer

Precautions

!Caution

Do not use the test button for any purpose other than testing. Be

sure not to touch the test button accidentally as this will turn the

contacts ON. Before using the test button, confirm that circuits, the

load, and any other connected item will operate safely.

!Caution

Check that the test button is released before turning ON relay cir-

cuits.

!Caution

If the test button is pulled out too forcefully, it may bypass the mo-

mentary testing position and go straight into the locked position.

!Caution

Use an insulated tool when you operate the test button.

Precautions for P2RF-@-S Connection

•Do not move the screwdriver up, down, or from side to side while it

is inserted in the hole. Doing so may cause damage to internal

components (e.g., deformation of the clamp spring or cracks in the

housing) or cause deterioration of insulation.

•Do not insert the screwdriver at an angle. Doing so may break the

side of the socket and result in a short-circuit.

PFP-100N, PFP-50N PFP-100N2

4.5

15 25 25 25 25

10 10

1,000 (500)

7.3±0.15

35±0.3 27±0.15

4.5

15 25 25 25 25 15

10 10

1,000

35±0.3 27 24

29.2

1 1.5

15 (5)

It is recommended to use a panel 1.6 to 2.0 mm thick.

PFP-M PFP-S

11.5

6.2 1.8

35.5 35.3

1.8

1.3

4.8

44.3 34.8

16.5

M4 x 8 pan

head screw

General-purpose Relay G2RS 13

14 General-purpose Relay G2RS

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. J140-E2-02