610/620-Series Sub-Miniature Rocker Switches The miniature 610/620-Series switches are double insulated and available in single or double pole configurations. These snap-in mounted switches are offered with either a paddle or rocker actuator and with ratings up to 8 amps. Applications include: Handheld Appliance, Power Supplies, Audio-Visual, Telecom, and Computers. Carling Technologies, Inc. 60 Johnson Avenue * Plainville, CT 06062-1177 Phone: (860) 793-9281 * Fax: (860) 793-9231 Email: sales@carlingtech.com * www.carlingtech.com 2 | 610/620-Series Sub-Miniature Rocker Switches Electrical Life Dielectric Strength 50,000 cycles- single pole 50,000 cycles- double pole UL/CSA: 1000V - live to dead metal parts & opposite polarity Operating Temperature Mechanical Life 32F to 185F (0C to 85C) 100,000 cycles 62012421 0 1 Base Part Number 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING1/TERMINATION1 4A 250VAC; 8A 125VAC Single Pole Solder Lugs PC Term On-none-On 62011421 62011422 On-none-(On) 62011431 62011432 On-off-On 62011461 62011462 On-off-(On) 62011471 62011472 (On)-off-(On) 62011481 62011482 Double Pole On-none-On 62012421 62012422 On-none-(On) 62012431 62012432 On-off-On 62012461 62012462 On-off-(On) 62012471 62012472 (On)-off-(On) 62012481 62012482 0 2 Terminal Sealing 3 Legend 2 TERMINAL SEALING 0 None E Epoxy sealed terminals 3 LEGEND hot stamp 0 A B D G NO LEGEND On-OFF vertical On-OFF horizontal I-O horizontal I-O vertical Notes: 1 Base part number specifies black rocker and bezel. To specify paddle actuator, change 2nd digit of part number from 2 to 1 (ex. 61012421) For additional ratings and colors, consult factory. ( ) indicates momentary function. .078[1.98] .171[4.34] .250[6.35] .284[7.21] .046[1.17] x .029[.736] .750[19.05] .050[1.27] .620[15.74] .590[14.98] .182[4.62] PC TERMINAL .300[7.62] CENTER .080 SOLDER LUG TERMINAL TYPE .510[12.95] .606[15.39] END .080[2.03] X .047[1.19] SLOT .171[4.34] BARRIER .515[13.08] .500[12.70] .625[15.87] .250[6.35] .750[19.05] PADDLE *Manufacturer reserves the right to change product specification without prior notice. MOUNTING HOLE Panel Thickness: .030[.762] min. to .093[2.36] max. REV_SW_610/620_0912 60 Johnson Avenue * Plainville, CT 06062-1177 * Phone: (860) 793-9281 * Fax: (860) 793-9231 Email: sales@carlingtech.com * www.carlingtech.com