CL Series * Ratings of 5A and10A @ 24-280 VAC * UL Approved, CE and RoHS Compliant * AC or DC control * Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 3-32 VDC 90-250 VAC 5A 10A CL240D05 CL240A05 CL240D10 CL240A10 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] (2) Maximum Load Current [Arms] (3) Minimum Load Current [mArms] Maximum Surge Current (50/60Hz, 1 Cycle) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [C/W] Maximum I t for Fusing (50/60Hz, 1/2 cycle) [A sec] Minimum Power Factor (with Maximum Load) 5A 10A 24-280 600 7 500 5 150 42/50 1.8 3.0 36/30 0.5 24-280 600 7 500 10 150 84/100 1.5 2.5 48/40 0.5 INPUT SPECIFICATIONS (1) Description CL240Dxx CL240Axx Control Voltage Range Maximum Reverse Voltage Maximum Turn-On Voltage Minimum Turn-Off Voltage Typical Input Current @ max turn-on voltage Nominal Input Impedance [Ohms] Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] 3-32 VDC -32 3.0 VDC 1.0 VDC 14 mA Current Limited 1/2 Cycle 1/2 Cycle 90-250 Vrms 90 Vrms 10 Vrms 10 mA Current Limited 50 50 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Terminals Input Terminal Screw Torque Range: Output Terminal Screw Torque Range: GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) When mounted to the proper size heat sink (see derating curves) 4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models) WIRING DIAGRAM Parameters 4000 Vrms 109 Ohm 8 pF -30 to 80 C -40 to 125 C 2.8 oz (79g) Hardware Furnished, Unmounted 8-10 in lb (0.9-1.1Nm) 18-20 in lb (2-2.2Nm) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E46203 Rev. 120811 ANNEX - ENVIROMENTAL INFORMATION