CL Series
• Ratings of 5A and10A @ 24-280 VAC
• UL Approved, CE and RoHS Compliant
• AC or DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
PRODUCT SELECTION
Control Voltage 5A 10A
3-32 VDC CL240D05 CL240D10
90-250 VAC CL240A05 CL240A10
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description 5A 10A
Operating Voltage (47-63Hz) [Vrms] 24-280 24-280
Transient Overvoltage [Vpk] 600 600
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 7 7
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500
Maximum Load Current [Arms] (3) 510
Minimum Load Current [mArms] 150 150
Maximum Surge Current (50/60Hz, 1 Cycle) [Apk] 42/50 84/100
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.8 1.5
Thermal Resistance Junction to Case (Rjc ) [°C/W] 3.0 2.5
Maximum I² t for Fusing (50/60Hz, 1/2 cycle) [A² sec] 36/30 48/40
Minimum Power Factor (with Maximum Load) 0.5 0.5
INPUT SPECIFICATIONS (1)
Description CL240Dxx CL240Axx
Control Voltage Range 3-32 VDC 90-250 Vrms
Maximum Reverse Voltage -32 -
Maximum Turn-On Voltage 3.0 VDC 90 Vrms
Minimum T urn -Off Voltage 1.0 VDC 10 Vrms
Typical Input Current @ max turn-on voltage 14 mA 10 mA
Nominal Input Impedance [Ohms] Current Limited Current Limited
Maximum Turn-On Time [msec] (4) 1/2 Cycle 50
Maximum Turn-Off Time [msec] 1/2 Cycle 50
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -30 to 80 °C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 2.8 oz (79g)
Terminals Hardware Furnished, Unmounted
Input Terminal Screw Torque Range: 8-10 in lb (0.9-1.1Nm)
Output Terminal Screw Torque Range: 18-20 in lb (2-2.2Nm)
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) When mounted to the proper size heat sink (see derating curves)
4) Turn-on time for Rando m turn-on versions is 0.02 msec (DC Control Models)
WIRING DIAGRAM
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
E46203
Rev. 120811
ANNEX - ENVIROMENTAL INFORMATION
