ONLINE
CATALOG
(203) 776-2813 • FAX (203) 776-8294
APPLIED ENGINEERING PRODUCTS
www.aepconnectors.com • aepsales@aepconnectors.com
1
Surface Mount Receptacles
AEP surface-mount P.C. board receptacles are available in top mount or edge mount types, in
SMA, SMB, SMC, SSMB, SSMC, and 75Ωseries. When mounted, they withstand torque, shear,
and pull forces greatly in excess of standard mating and unmating forces.
Tape-and-reel packaging is available.
AEP surface-mount P.C. board receptacles meet all interface requirements of MIL-STD-348, and appropriate
performance requirements of MIL-PRF-39012. Bodies and contacts are gold plated, but other finishes are
available. The items below are only the most commonly-used configurations; any printed-circuit board
receptacle shown in our full catalog can be provided in top- or edge-mount versions.
Edge-mount types can be supplied quickly for any board thickness up to these maximums: .062" for SMA, SMB,
and SMC; .045" for SSMB and SSMC. Connectors for thicker boards can be supplied by special order.
For complete specifications and interface dimensions, please see our full-line catalog, or the online catalog for
the appropriate series at www.aepconnectors.com.
Solder
(bottom legs and
center conductor)
Solder
(top legs)
Printed circuit board
Solder
(center conductor)
Printed circuit board
Solder (leg) (typ.)
Ground trace
Ground trace
Signal trace
P.C. board
Solder (center conductor)
Solder (legs)
Printed circuit board
Ground trace
Ground trace
Signal trace
Solder (leg)
Solder (leg)
How they work:
Introduction
Edge mount
Top mount
Continued on next page
SMA Jacks
Edge mount Top mount
.050 .050 dia.
.160
.295
.345
.250
sq.
.155 .050 dia.
.040 (typ.)
“A”
(board
thickness)
.450
.295
.250
sq.
AEP P/N
9650-1113-005
“A” AEP P/N
.032 9650-1113-014
.062 9650-1113-017
(203) 776-2813 • FAX (203) 776-8294
APPLIED ENGINEERING PRODUCTS
www.aepconnectors.com • aepsales@aepconnectors.com
2
SMC Jacks
Edge mount Top mount
.050 .038 dia.
.295
.345
.250
sq.
.160
.155
.040 (typ.)
.036 (typ.)
“A”
(board
thickness)
.450
.295
.250
sq.
.038 dia.
AEP P/N
1009-1511-006
Surface Mount Receptacles
SSMC Jacks
Edge mount Top mount
.025
.289
.264 .038 (typ.)
.080
.156 sq.
.026 dia.
.155
.419
.264 .020 (typ.)
.156 sq.
.026 dia.
.031
(P.C. board
thickness)
AEP P/N
7009-1511-004
AEP P/N
7009-1511-005
“A” AEP P/N
.032 1009-1511-004
.062 1009-1511-005
SSMB Jacks
Edge mount Top mount
.025
.289
.264 .038 (typ.)
.080
.156 sq.
.026 dia.
.155
.419
.264 .020 (typ.)
.156 sq.
.026 dia.
.031
(P.C. board
thickness)
AEP P/N
7209-1511-015
AEP P/N
7209-1511-060
“A” AEP P/N
.032 2009-1511-035
.062 2009-1511-023
SMB Jacks
Edge mount Top mount
.050
.160
.295
.345
.250
sq.
.038 dia.
.155
.040 (typ.)
.036 (typ.)
“A”
(board
thickness)
.450
.295
.250
sq.
.038 dia.
AEP P/N
2009-1511-019
