E IN G L LO N O TA A C Surface Mount Receptacles Introduction AEP surface-mount P.C. board receptacles are available in top mount or edge mount types, in SMA, SMB, SMC, SSMB, SSMC, and 75 series. When mounted, they withstand torque, shear, and pull forces greatly in excess of standard mating and unmating forces. Tape-and-reel packaging is available. AEP surface-mount P.C. board receptacles meet all interface requirements of MIL-STD-348, and appropriate performance requirements of MIL-PRF-39012. Bodies and contacts are gold plated, but other finishes are available. The items below are only the most commonly-used configurations; any printed-circuit board receptacle shown in our full catalog can be provided in top- or edge-mount versions. Edge-mount types can be supplied quickly for any board thickness up to these maximums: .062" for SMA, SMB, and SMC; .045" for SSMB and SSMC. Connectors for thicker boards can be supplied by special order. For complete specifications and interface dimensions, please see our full-line catalog, or the online catalog for the appropriate series at www.aepconnectors.com. How they work: Solder (leg) (typ.) Solder (top legs) Ground trace Printed circuit board Edge mount Printed circuit board Signal trace Solder (bottom legs and center conductor) Ground trace Solder (center conductor) Solder (leg) Ground trace Top mount Printed circuit board Signal trace Solder (legs) Solder (center conductor) Ground trace Solder (leg) P.C. board SMA Jacks Edge mount .450 Top mount .345 .040 (typ.) .250 sq. .295 .155 "A" .032 .062 "A" (board thickness) .050 dia. AEP P/N 9650-1113-014 9650-1113-017 .160 .250 sq. .295 .050 .050 dia. AEP P/N 9650-1113-005 Continued on next page APPLIED ENGINEERING PRODUCTS (203) 776-2813 * FAX (203) 776-8294 www.aepconnectors.com * aepsales@aepconnectors.com 1 Surface Mount Receptacles SMB Jacks Edge mount Top mount .040 (typ.) .450 "A" (board thickness) .250 sq. .345 .160 .250 sq. .036 (typ.) .295 .155 .295 .038 dia. "A" .032 .062 .038 dia. .050 AEP P/N 2009-1511-019 AEP P/N 2009-1511-035 2009-1511-023 SMC Jacks Edge mount Top mount .040 (typ.) .450 "A" (board thickness) .250 sq. .345 .160 .250 sq. .036 (typ.) .295 .155 .295 .038 dia. "A" .032 .062 .038 dia. .050 AEP P/N 1009-1511-004 1009-1511-005 AEP P/N 1009-1511-006 SSMB Jacks Edge mount .419 .155 .026 dia. .156 sq. .289 .031 .156 sq. .264 Top mount .080 (P.C. board thickness) .020 (typ.) .264 .025 AEP P/N 7209-1511-060 .026 dia. .038 (typ.) AEP P/N 7209-1511-015 SSMC Jacks Edge mount .419 .155 .026 dia. .156 sq. .289 .031 .156 sq. .264 Top mount .080 (P.C. board thickness) .020 (typ.) AEP P/N 7009-1511-005 APPLIED ENGINEERING PRODUCTS (203) 776-2813 * FAX (203) 776-8294 .264 .025 .026 dia. .038 (typ.) AEP P/N 7009-1511-004 www.aepconnectors.com * aepsales@aepconnectors.com 2