1/7
®
Z01 Series
STANDARD 1A TRIACS
July 2003 - Ed: 5
MAIN FEATU RE S :
DESCRIPTION
The Z01 series is sui table for general purpose AC
switching applications. They can be found in
applications such as home appliances
(electrovalve, pump, door lock, small lamp
con trol), fan speed controllers,...
Different gate current sensitivities are available,
allowing optimized performances when controlled
directly from microcontrollers.
Symbol Value Unit
IT(RMS) 1A
V
DRM/VRRM 600 to 800 V
IGT ( Q1)3 to 25 mA
ABSOLUTE MAXIM UM RAT INGS
Symbol Parameter Value Unit
IT(RMS) RMS on-state current (full sine wave) SOT-223 Ttab = 90°C 1A
TO-92 TI = 50°C
ITSM Non repetitive surge peak on-state
current (full cycle, Tj initial = 25°C) F = 50 Hz t = 20 ms 8 A
F = 60 Hz t = 16.7 ms 8.5
I²tI
²
t Value for fusing tp = 10 ms 0.35 A²s
dI/dt Critical rate of rise of on-state current
IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz Tj = 125°C 20 A/µs
IGM Peak gate current tp = 20 µs Tj = 125°C 1 A
PG(AV) Average gate power dissipation Tj = 125°C 0.1 W
Tstg
TjStorage junction temperature range
Operatin g junction temp erature range - 40 to + 150
- 40 to + 125 °C
G
A2
A1
A2
A1A2
GA2
A1
TO-92
(Z01xxA) SOT-223
(Z01xxN)
Z01 Ser ies
2/7
ELECTRICAL CHARACTE RISTICS (Tj = 25°C, unless othe rwise specified )
STAT IC CHARACTERISTICS
Note 1: minimum IGT is guaranted at 5% of IGT max.
Note 2: for both polarities of A2 referenced to A1
THERMA L RESISTANCES
S = Copper surface under tab
Symbol Test Conditions Quadrant Z01xx Unit
03 07 09 10
IGT (1) VD = 12 V RL = 30 ΩI - II - III
IV MAX. 3
55
710
10 25
25 mA
VGT ALL MAX. 1.3 V
VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C ALL MIN. 0.2 V
IH (2) IT = 50 mA MAX. 7 10 10 25 mA
ILIG = 1.2 IGT I - III - IV MAX. 7 10 15 25 mA
II 15 20 25 50
dV/dt (2) VD = 67 %VDRM gate open Tj = 110°C MIN. 10 20 50 100 V/µs
(dV/dt)c (2) (dI/dt)c = 0.44 A/ms Tj = 110°C MIN. 0.5 1 2 5 V/µs
Symbol Test Conditions Value Unit
VTM (2) ITM = 1.4 A tp = 380 µs Tj = 25°C MAX. 1.6 V
Vto (2) Threshold voltage Tj = 125°C MAX. 0.95 V
Rd (2) Dynamic resistance Tj = 125°C MAX. 400 mΩ
IDRM
IRRM
VDRM = VRRM Tj = 25°C MAX. 5µA
Tj = 125°C 0.5 mA
Symbol Parameter Value Unit
Rth(j-t) Junction to tab (AC) SOT-223 25 °C/W
Rth(j-l) Junction to lead (AC) TO-92 60
Rth(j-a) Junction to ambient S = 5 cm²SOT-223 60 °C/W
TO-92 150
Z01 Series
3/7
PRODUCT SELECTOR
ORDERING INFO RMATION
Part Number Voltage Sensitivity Type Package
600 V 700 V 800 V
Z0103MA X 3 mA Standard TO-92
Z0103MN X 3 mA Standard SOT-223
Z0103SA X 3 mA Standard TO-92
Z0103SN X 3 mA Standard SOT-223
Z0103NA X 3 mA Standard TO-92
Z0103NN X 3 mA Standard SOT-223
Z0107MA X 5 mA Standard TO-92
Z0107MN X 5 mA Standard SOT-223
Z0107SA X 5 mA Standard TO-92
Z0107SN X 5 mA Standard SOT-223
Z0107NA X 5 mA Standard TO-92
Z0107NN X 5 mA Standard SOT-223
Z0109MA X 10 mA Sta ndar d TO- 92
Z0109MN X 10 mA Sta ndar d SOT-22 3
Z0109SA X 10 mA Sta ndar d TO- 92
Z0109SN X 10 mA Sta ndar d SOT-22 3
Z0109NA X 10 mA Sta ndar d TO- 92
Z0109NN X 10 mA Sta ndar d SOT-22 3
Z0110MA X 25 mA Sta ndar d TO- 92
Z0110MN X 25 mA Sta ndar d SOT-22 3
Z0110SA X 25 mA Sta ndar d TO- 92
Z0110SN X 25 mA Sta ndar d SOT-22 3
Z0110NA X 25 mA Sta ndar d TO- 92
Z0110NN X 25 mA Sta ndar d SOT-22 3
Z 01 03 M A 1AA2
TRIAC
SERIES
CURRENT: 1A
SENSITIVITY:
03: 3mA
07: 5mA
09: 10mA
10: 25mA
VOLTAGE:
M: 600V
S: 700V
N: 800V
PACKAGE:
A:TO-92
N: SOT-223
PACKING MODE:
1AA2:TO-92 bulk (preferred)
2AL2:TO-92 ammopack
5AA4: SOT-223 Tape & reel
Blank
Z01 Ser ies
4/7
OTHER INFORMATION
Note: xx = sensitivity, y = voltage
Part Number Marking Weight Base
quantity Packing
mode
Z01xxyA 1AA2 Z01xxyA 0.2 g 2500 Bulk
Z01xxyA 2AL2 Z01xxyA 0.2 g 2000 Ammopack
Z0103yN 5AA4 Z3y 0.12 g 1000 Tape & reel
Z0107yN 5AA4 Z7y 0.12 g 1000 Tape & reel
Z0109yN 5AA4 Z9y 0.12 g 1000 Tape & reel
Z0110yN 5AA4 Z0y 0.12 g 1000 Tape & reel
Fig. 1: Maximum power dissipation versus RMS
on-state current (fu ll cycle). Fig. 2-1: RMS on-state current versus ambient
temperatu re (full cycl e).
Fig. 2-2: RMS on-state current versus ambient
temp er a ture (fu l l cycl e) . Fig. 3: Relative variation of thermal impedance
juncti on to ambient ve rsus pulse duration.
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.00
0.25
0.50
0.75
1.00
1.25
1.50 P(W)
IT(RMS)(A)
0 25 50 75 100 125
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Tl orTtab (°C)
IT(RMS)(A)
SOT-223
(Rth(j-a)=Rth(j-t))
TO-92
(Rth(j-a=Rth(j-l))
0 25 50 75 100 125
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Tamb(°C)
IT(RMS)(A)
TO-92
Rth(j-a)=150°C/W
SOT-223
(Rth(j-a)=60°C/W)
1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2
0.01
0.10
1.00 K=[Zth(j-a)/Rth(j-a)]
Z01xxxN
Z01xxxA
tp(s)
Z01 Series
5/7
Fig. 4: Relative variation of gate trigger current,
holding current and latching current versus
junction temperature (typical values).
Fig. 5: Surge peak on-state current versus
number of cycles.
Fig. 6: Non-repetitive surge peak on-state
current for a sinusoidal pulse with width
tp < 10ms, and corresponding v alue of I²t.
Fig. 7: On-state characteristics (maximum
values).
Fig. 8: Relative variation of critical rate of
decrease of mai n curren t versus (dV/dt)c (typical
values).
Fig. 9: Relative variation of critical rate of
decrease of main current versus junction
temperature.
-40 -20 0 20 40 60 80 100 120 140
0.0
0.5
1.0
1.5
2.0
2.5
Tj(°C)
IGT,IH,IL [Tj] / IGT,IH,IL [Tj=25°C]
IGT
IH & IL
1 10 100 1000
0
1
2
3
4
5
6
7
8
9ITSM(A)
Non repetitive
Tj initial=25°C
Repetitive
Tamb=25°C
One cycle
t=20ms
Number of cycles
0.01 0.10 1.00 10.00
0.1
1.0
10.0
100.0
tp (ms)
ITSM (A), I²t (A²s)
Tj initial=25°C
ITSM
I²t
dI/dt limitation:
20A/µs
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1
1.0
10.0 ITM(A)
Tj=25°C Tj max.
Vto= 0.95 V
Rd= 420 mΩ
Tj=Tj max.
VTM(V)
0.1 1.0 10.0 100.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6 (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c
Z0103
Z0107 Z0110
Z0109
(dV/dt)c (V/µs)
0 25 50 75 100 125
0
1
2
3
4
5
6(dI/dt)c [Tj] / (dI/dt)c [Tj specified]
Tj (°C)
Z01 Ser ies
6/7
Fig. 10: SOT-223 Thermal resistance junction to
ambient v ersus copper surf ace under tab (printed
circuit board FR4, copper th ickness: 35µm).
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0
10
20
30
40
50
60
70
80
90
100
110
120
130 Rth(j-a) (°C/W)
SOT-223
S(cm²)
PACKAGE MECHA NICAL DATA
SOT-223 (Plastic)
REF.
DIMENSIONS
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.80 0.071
A1 0.02 0.1 0.0008 0.004
B 0.60 0.70 0.85 0.024 0.027 0.034
B1 2.90 3.00 3.15 0.114 0.118 0.124
c 0.24 0.26 0.35 0.009 0.010 0.014
D 6.30 6.50 6.70 0.248 0.256 0.264
e 2.3 0.090
e1 4.6 0.181
E 3.30 3.50 3.70 0.130 0.138 0.146
H 6.70 7.00 7.30 0.264 0.276 0.287
V10° max
A
A1
B
e1
D
B1
HE
e
c
V
Z01 Series
7/7
Information furnished is b elieved to be ac curate and reliable. However, STMicr oelect ronics assumes n o responsibility for the consequences
of us e of su ch in fo rm ati on n or f or a ny in fr ing em ent of pa te nt s or o th er r igh ts o f th ir d pa r tie s w hic h may r esul t from i ts us e. No lic ense is granted
by impli cation or othe rwise under any pat ent or patent rights of STM i croele ct ronics. S pecifi cations m entioned in thi s publi cati on are subje ct
to ch ange without not ic e. T hi s pu bl i cation su persedes and replaces all informat i on p reviousl y supplied. STMicroelect ronic s products are n ot
authorized for us e as critic al components in l i fe support devices or sys tems without express w ri t ten approval of S TMicroelectr o nics.
© The ST logo is a registered trademark of STMicroelectronics
© 2003 STMicroelectronics - Printed in Italy - All Rights Reserved
STMi croelectronics GROUP OF COMPANIES
Australia - Brazil - China - Finland - F rance - Germany - Hong Kong - India - Italy - Japan - Ma la ysia
Malta - Morocco - Singapore - Spain - Sweden - S wi t zerlan d - United Kingdom - U.S. A
http://www.st.com
PACKAGE MECHANICAL DATA
TO-92 (Plastic)
REF.
DIMENSIONS
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.35 0.053
B 4.70 0.185
C 2.54 0.100
D 4.40 0.173
E 12.70 0.500
F 3.70 0.146
a 0.45 0.017
D
F
a
E
B
A
C
FOOTPRINT DIMENSIONS (in millimete r s )
SOT-223 (Plastic)
