Z01 Series (R) 1A TRIACS STANDARD MAIN FEATURES: A2 Symbol Value Unit IT(RMS) 1 A VDRM/VRRM 600 to 800 V IGT (Q1) 3 to 25 mA G A1 A2 A1 DESCRIPTION The Z01 series is suitable for general purpose AC switching applications. They can be found in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... Different gate current sensitivities are available, allowing optimized performances when controlled directly from microcontrollers. A2 A1 G A2 TO-92 (Z01xxA) SOT-223 (Z01xxN) ABSOLUTE MAXIMUM RATINGS Symbol IT(RMS) ITSM I t Parameter RMS on-state current (full sine wave) Value SOT-223 Ttab = 90C Unit A 1 Non repetitive surge peak on-state current (full cycle, Tj initial = 25C) It Value for fusing TO-92 TI = 50C F = 50 Hz t = 20 ms 8 F = 60 Hz t = 16.7 ms 8.5 tp = 10 ms A 0.35 A s dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns F = 120 Hz Tj = 125C 20 A/s IGM Peak gate current tp = 20 s Tj = 125C 1 A Tj = 125C 0.1 W - 40 to + 150 - 40 to + 125 C PG(AV) Tstg Tj Average gate power dissipation Storage junction temperature range Operating junction temperature range July 2003 - Ed: 5 1/7 Z01 Series ELECTRICAL CHARACTERISTICS (Tj = 25C, unless otherwise specified) Symbol Test Conditions IGT (1) Quadrant RL = 30 VD = 12 V VD = VDRM IH (2) IT = 50 mA IL IG = 1.2 IGT (dV/dt)c (2) 07 09 10 3 5 5 7 10 10 25 25 MAX. ALL MAX. 1.3 V ALL MIN. 0.2 V RL = 3.3 k Tj = 125C MAX. I - III - IV MAX. II dV/dt (2) Unit 03 I - II - III IV VGT VGD Z01xx 7 10 10 mA 25 mA mA 7 10 15 25 15 20 25 50 VD = 67 %VDRM gate open Tj = 110C MIN. 10 20 50 100 V/s Tj = 110C MIN. 0.5 1 2 5 V/s (dI/dt)c = 0.44 A/ms STATIC CHARACTERISTICS Symbol Test Conditions VTM (2) ITM = 1.4 A Vto (2) tp = 380 s Value Unit Tj = 25C MAX. 1.6 V Threshold voltage Tj = 125C MAX. 0.95 V Rd (2) Dynamic resistance Tj = 125C MAX. 400 m IDRM VDRM = VRRM Tj = 25C 5 A 0.5 mA IRRM Tj = 125C MAX. Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1 THERMAL RESISTANCES Symbol Parameter Unit C/W Rth(j-t) Junction to tab (AC) SOT-223 25 Rth(j-l) Junction to lead (AC) TO-92 60 Rth(j-a) Junction to ambient SOT-223 60 TO-92 150 S = Copper surface under tab 2/7 Value S = 5 cm C/W Z01 Series PRODUCT SELECTOR Voltage Part Number 600 V 700 V Sensitivity Type Package 800 V Z0103MA X 3 mA Standard TO-92 Z0103MN X 3 mA Standard SOT-223 Z0103SA X 3 mA Standard TO-92 Z0103SN X 3 mA Standard SOT-223 Z0103NA X 3 mA Standard TO-92 Z0103NN X 3 mA Standard SOT-223 Z0107MA X 5 mA Standard TO-92 Z0107MN X 5 mA Standard SOT-223 Z0107SA X 5 mA Standard TO-92 Z0107SN X 5 mA Standard SOT-223 Z0107NA X 5 mA Standard TO-92 Z0107NN X 5 mA Standard SOT-223 Z0109MA X 10 mA Standard TO-92 Z0109MN X 10 mA Standard SOT-223 Z0109SA X 10 mA Standard TO-92 Z0109SN X 10 mA Standard SOT-223 Z0109NA X 10 mA Standard TO-92 Z0109NN X 10 mA Standard SOT-223 Z0110MA X 25 mA Standard TO-92 Z0110MN X 25 mA Standard SOT-223 Z0110SA X 25 mA Standard TO-92 Z0110SN X 25 mA Standard SOT-223 Z0110NA X 25 mA Standard TO-92 Z0110NN X 25 mA Standard SOT-223 ORDERING INFORMATION Z 01 03 M A Blank 1AA2 TRIAC SERIES VOLTAGE: M: 600V S: 700V N: 800V CURRENT: 1A PACKAGE: A: TO-92 N: SOT-223 PACKING MODE: 1AA2: TO-92 bulk (preferred) 2AL2: TO-92 ammopack 5AA4: SOT-223 Tape & reel SENSITIVITY: 03: 3mA 07: 5mA 09: 10mA 10: 25mA 3/7 Z01 Series OTHER INFORMATION Part Number Marking Weight Base quantity Packing mode Z01xxyA 1AA2 Z01xxyA 0.2 g 2500 Bulk Z01xxyA 2AL2 Z01xxyA 0.2 g 2000 Ammopack Z0103yN 5AA4 Z3y 0.12 g 1000 Tape & reel Z0107yN 5AA4 Z7y 0.12 g 1000 Tape & reel Z0109yN 5AA4 Z9y 0.12 g 1000 Tape & reel Z0110yN 5AA4 Z0y 0.12 g 1000 Tape & reel Note: xx = sensitivity, y = voltage Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle). Fig. 2-1: RMS on-state current versus ambient temperature (full cycle). P(W) IT(RMS)(A) 1.50 1.2 1.25 1.0 1.00 0.8 0.75 0.6 0.50 0.4 SOT-223 (Rth(j-a)=Rth(j-t)) TO-92 (Rth(j-a=Rth(j-l)) 0.2 0.25 Tl or Ttab (C) IT(RMS)(A) 0.00 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.0 Fig. 2-2: RMS on-state current versus ambient temperature (full cycle). Fig. 3: Relative variation of thermal impedance junction to ambient versus pulse duration. 0 25 100 125 1.00 SOT-223 (Rth(j-a)=60C/W) 1.0 0.8 Z01xxxA 0.6 0.10 TO-92 Rth(j-a)=150C/W 0.4 0.2 4/7 75 K=[Zth(j-a)/Rth(j-a)] IT(RMS)(A) 1.2 0.0 50 Z01xxxN Tamb(C) 0 25 50 75 tp(s) 100 125 0.01 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Z01 Series Fig. 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values). Fig. 5: Surge peak on-state current versus number of cycles. IGT,IH,IL [Tj] / IGT,IH,IL [Tj=25C] ITSM(A) 2.5 2.0 IGT 1.5 IH & IL 1.0 0.5 Tj(C) 0.0 -40 -20 0 20 40 60 80 100 120 140 Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms, and corresponding value of It. 9 8 7 6 5 4 3 2 1 0 t=20ms One cycle Non repetitive Tj initial=25C Repetitive Tamb=25C Number of cycles 1 10 Fig. 7: values). 100 On-state characteristics 1000 (maximum ITM(A) ITSM (A), It (As) 10.0 100.0 Tj initial=25C dI/dt limitation: 20A/s ITSM 10.0 Tj=Tj max. 1.0 1.0 Tj=25C It tp (ms) Tj max. Vto= 0.95 V Rd= 420 m 10.00 VTM(V) 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Fig. 8: Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values). Fig. 9: Relative variation of critical rate of decrease of main current versus junction temperature. 0.1 0.01 0.10 1.00 (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 Z0109 Z0103 0.6 Z0107 0.4 Z0110 0.2 (dV/dt)c (V/s) 0.0 0.1 1.0 10.0 (dI/dt)c [Tj] / (dI/dt)c [Tj specified] 6 5 4 3 2 1 100.0 0 Tj (C) 0 25 50 75 100 125 5/7 Z01 Series Fig. 10: SOT-223 Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35m). Rth(j-a) (C/W) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0.0 SOT-223 S(cm) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 PACKAGE MECHANICAL DATA SOT-223 (Plastic) DIMENSIONS c A REF. V A1 Min. B e1 D B1 H E e 6/7 Millimeters A A1 B B1 c D e e1 E H V 0.02 0.60 2.90 0.24 6.30 3.30 6.70 Typ. 0.70 3.00 0.26 6.50 2.3 4.6 3.50 7.00 Max. Inches Min. Typ. Max. 1.80 0.071 0.1 0.0008 0.004 0.85 0.024 0.027 0.034 3.15 0.114 0.118 0.124 0.35 0.009 0.010 0.014 6.70 0.248 0.256 0.264 0.090 0.181 3.70 0.130 0.138 0.146 7.30 0.264 0.276 0.287 10 max Z01 Series FOOTPRINT DIMENSIONS (in millimeters) SOT-223 (Plastic) PACKAGE MECHANICAL DATA TO-92 (Plastic) DIMENSIONS REF. A Min. a B C F D E Millimeters A B C D E F a Typ. Max. Inches Min. 1.35 Typ. Max. 0.053 4.70 0.185 2.54 0.100 4.40 12.70 0.173 0.500 3.70 0.45 0.146 0.017 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2003 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A http://www.st.com 7/7