All 3M™ Bumpon™ Protective Products feature a urethane composition which exhibits:
Easy application with 3M pressure sensitive adhesives.
High skid-resistance.
Won't scratch or stain surfaces.
Reduces vibration and noise.
Will not crack or harden.
3M™ Bumpon™ Protective Product SJ5008 is a self-adhesive rubber bumper designed to be used as feet, stops and
spacers. The flat top shape provides increased load bearing capacity and better wear resistance. Black, 0.5 in wide x
0.120 in. high.
Height-Thickness Range 0.100 - 0.199 in
Height-Thickness Range (metric) 3.0 - 3.9 mm
Market Facilities Management
Market Segment Appliances , Automotive , Cabinetry , Electronics
National Stock Number 5342011838568
Primary Liner Translucent Polyester Film
Product Form Molded
Product Series SJ5008
Shape Square-Tapered w/ Flat Top
Trademark 3M
Width-Diameter Range 0.500 - 0.599 in
Width-Diameter Range (metric) 10.0 - 19.9 mm
Details
Resources
Data Sheet
3M™ Bumpon™ Protective Products Molded Shapes,
Colored and Clear (PDF, 318.8KB)
Legal Disclaimer
Product Disclaimer
The technical information and data shown on this page should be considered representative or typical only and
should not be used for specification purposes.
3M products shown on this website may not be available in all geographic regions or may not be available at this
time. Please contact your local sales representative to determine product availability.