M24308/1-3F - Positronic - Datasheet.Live

AMSC N/A FSC 5935

INCH-POUND

MIL-DTL-24308/1K

w/AMENDMENT1

8 March 2013

SUPERSEDING

MIL-DTL-24308/1K

2 March 2009

DETAIL SPECIFICATION SHEET

CONNECTORS, ELEC TRIC, RECTANGULAR, MINIATURE,

POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS,

GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE

This specification is approved for use by all Departments and Agencies of the Department of Defense.

The requirements for acquiring the product described herein shall consist of this specification sheet and

MIL-DTL-24308.

FIGURE 1. Shell, receptacle.

Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:19ZCheck the source to verify that this is the current version before use.

MIL-DTL-24308/1K

w/AMENDMENT 1

2

Detail

Shell

Dimensions

(See note 8)

size

A

B

C

D

E

F

G

H

J

K

L

1

1.228

(31.19)

1.198

(30.43)

.648

(16.46)

.638

(16.21)

.989

(25.12)

.979

(24.87)

.316

( 8.03)

.302

( 7.67)

.509

(12.93)

.479

(12.17)

.439

(11.15)

.419

(10.64)

.248

(6.30)

.238

(6.05)

.769

(19.53)

.749

(19.02)

.432

(10.97)

.412

(10.46)

.060

(1.52)

.035

( .89)

.040

(1.02)

.020

( .51)

2

1.556

(39.52)

1.526

(38.76)

.976

(24.79)

.966

(24.53)

1.317

(33.45)

1.307

(33.20)

.316

( 8.03)

.302

( 7.67)

.509

(12.93)

.479

(12.17)

.439

(11.15)

.419

(10.64)

.248

(6.30)

.238

(6.05)

1.093

(27.76)

1.073

(27.25)

.432

(10.97)

.412

(10.46)

.060

(1.52)

.035

( .89)

.040

(1.02)

.020

( .51)

A

3

2.103

(53.42)

2.073

(52.65)

1.516

(38.51)

1.506

(38.25)

1.857

(47.17)

1.847

(46.91)

.316

( 8.03)

.302

( 7.67)

.509

(12.93)

.479

(12.17)

.439

(11.15)

.419

(10.64)

.248

(6.30)

.238

(6.05)

1.635

(41.53)

1.615

(41.02)

.432

(10.97)

.412

(10.46)

.060

(1.52)

.035

( .89)

.040

(1.02)

.020

( .51)

4

2.744

(69.70)

2.714

(68.94)

2.164

(54.97)

2.154

(54.71)

2.505

(63.63)

2.495

(63.37)

.316

( 8.03)

.302

( 7.67)

.509

(12.93)

.479

(12.17)

.439

(11.15)

.419

(10.64)

.248

(6.30)

.238

(6.05)

2.282

(57.96)

2.262

57.45

.432

(10.97)

.412

(10.46)

.060

(1.52)

.035

( .89)

.040

(1.02)

.020

( .51)

5

2.650

(67.31)

2.620

(66.55)

2.069

(52.55)

2.059

(52.30)

2.411

(61.24)

2.401

(60.99)

.428

(10.87)

.418

(10.62)

.620

(15.75)

.590

(14.99)

.439

(11.15)

.419

(10.64)

.248

(6.30)

.238

(6.05)

2.188

(55.58)

2.168

(55.07)

.544

(13.82)

.524

(13.31)

.060

(1.52)

.035

( .89)

.040

(1.02)

.020

( .51)

1

Same as -1 except per detai l B

2

Same as -2 except per detai l B

B

3

Same as -3 except per detai l B

(See note 9)

4

Same as -4 except per detai l B

5

Same as -5 except per detai l B

1

Same as -1 except per detai l C

2

Same as -2 except per detai l C

C

3

Same as -3 except per detai l C

4

Same as -4 except per detai l C

5

Same as -5 except per detai l C

FIGURE 1. Shell, receptacle - Continued.

Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:19ZCheck the source to verify that this is the current version before use.

MIL-DTL-24308/1K

w/AMENDMENT 1

3

NOTES:

1. Dimensions are in inches.

2. Metric equivalents are given for information only.

3. Accommodates a .040 (1.02mm) diameter pin.

4. Use .041/.039 (1.04/.99mm) diameter pin.

5. Patent notice. The government has a royalty free license under the U.S. Patents listed below for the benefit of

manufactur er s of the items dis closed and des cri bed her e in, either for the government of for use in equipme nt

delivered to the gov ernm ent.

2790153 expires April 23, 1974

3110093 expires November 12, 1980

3158424 expires November 24, 1981

6. Copyright notice. All information disclosed in this military specification sheet which is or may be copyrighted by

ITT Cannon Electric is reproduced herein with the express permission of the copyright owner.

7. Indentation on the ends of the termination side of the shell, for the purpose of securing the insulator in the

shell, is permitted. This may result in the “F” dimension being undersized in these areas. However the “F”

dimension shall be maintained for the remainder of the connector.

8. See table II for supersession data.

9. Detail B is inactive for new design, use detail C.

Inches

mm

.004

.10

.005

.13

.008

.20

.010

.25

.030

.76

.031

.79

.041

1.04

.062

1.57

.070

1.78

.086

2.18

.092

2.34

.097

2.46

.103

2.62

.115

2.92

.120

3.05

.125

3.18

.129

3.28

.149

3.78

.390

9.91

FIGURE 1. Shell, receptacle - Continued.

Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:19ZCheck the source to verify that this is the current version before use.

MIL-DTL-24308/1K

w/AMENDMENT 1

4

REQUIREMENTS:

The connector s shall conform to figure 1 of this specification and Appendix A and B of MIL-DTL-24308 as indicated

in table I.

TABLE I. Design standards. 1/

Part or Identifying

Number (PIN)

Cla ss G

Cla ss D

Shell

size

Shell

detail

(see figure 1)

Insert

arrangement

reference

number

3/

Contact

Figure no.

4/

M24308/1-1

M24308/1-34

1

A

A-1-1

B1

M24308/1-2

M24308/1-35

2

A

A-2-1

B1

M24308/1-3

M24308/1-36

3

A

A-3-1

B1

M24308/1-4

M24308/1-37

4

A

A-4-1

B1

M24308/1-5

M24308/1-38

5

A

A-5-1

B1

M24308/1-12 2/

M24308/1-45

1

B

A-1-1

B1

M24308/1-13 2/

M24308/1-46

2

B

A-2-1

B1

M24308/1-14 2/

M24308/1-47

3

B

A-3-1

B1

M24308/1-15 2/

M24308/1-48

4

B

A-4-1

B1

M24308/1-16 2/

M24308/1-49

5

B

A-5-1

B1

M24308/1-23

M24308/1-56

1

C

A-1-1

B1

M24308/1-24

M24308/1-57

2

C

A-2-1

B1

M24308/1-25

M24308/1-58

3

C

A-3-1

B1

M24308/1-26

M24308/1-59

4

C

A-4-1

B1

M24308/1-27

M24308/1-60

5

C

A-5-1

B1

1/ These connectors mate with connectors specified in MIL-DTL-24308/3, MIL-DTL-24308/4,

MIL-DTL-24308/9, and MIL-DTL-24308/24.

2/ PINs M24308/1-12 through M24308/1-16 and M24308/1-45 through M24308/1-49 are inactive for new

design, use M 24308/1-23 through M24308/1-27 and M24308/1-56 thro ugh M 24308/1-60.

3/ For insert arrangement see MIL-DTL-24308, Appendix A.

4/ For contact see MIL-DTL-24308, Appendix B.

PIN: Consists of the letter M, the basic number of the specification sheet, and a dash number compiled from the

code.

PIN example: M24308/1 -26 F

Specification sheet number

Data sheet number fr om tabl e I

Finish : For class G:

A = Pure electrod epo sit ed alu minu m

F = Cadmium

K = Zinc nickel

T = Nickel Fluorocarbon Polymer

Z = Zinc

For class D:

Class D connectors have a nickel finish, no suffix is required.

Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:19ZCheck the source to verify that this is the current version before use.

MIL-DTL-24308/1K

w/AMENDMENT 1

5

Supersession data: See table II.

TABLE II. Shell supersessio n data.

Shell detail

(see figure 1)

Superseded MS sheet

Detail A

MS18269-1 throu gh –5

Detail B

MS18269-7 throu gh –11

Detail C

MS18269-13 through -17

Amendment notations. The margins of this specification are marked with vertical lines to indicate

where modifications from this amendment were made. This was done as a convenience only and

the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders

and contractors are cautioned to evaluate the requirements of this document based on the entire

content irrespective of the marginal notations.

Referenced documents. In addition to MIL-DTL-24308, this document references the following:

MIL-DTL-24308/3

MIL-DTL-24308/4

MIL-DTL-24308/9

MIL-DTL-24308/24

CONCLUDING MATERIAL

Custodians: Preparing activity:

Army - CR DLA - CC

Navy - EC

Air Force - 85 (Project: 5935-2013-018)

NASA - NA

DLA - CC

Review activities:

Army - AT, AV, CR4, MI

Navy - AS, CG, MC, SH

Air Force - 99

NOTE: The activities listed above were interested in this document as of the date of this document. Since

organizations and responsibilities can change, you should verify the currency of the information above using the

ASSIST Online database at https://assist.dla.mil.

Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:19ZCheck the source to verify that this is the current version before use.