5702 BLACK/YELLOW (2"X36YDS) - 3M

Safety Stripe Tapes

5700 • 5702

Product Description 3M™ Safety Stripe Tapes are durable vinyl tapes used to identify and mark traffic

areas and physical hazards.

Technical Data

ASTM Test Method

Adhesion to Steel: 19 oz./in. width (21 N/100 mm) D-3330

Tensile Strength at Break: 15 lbs./in. width (260 N/100 mm) D-3759

Elongation at Break: 170% D-3759

Backing Thickness: 4.2 mils (0.11 mm) D-3652

Total Tape Thic kness: 5.4 mils (0.14 mm) D-3652

Temperature Use Range: 40° to 170°F (4° to 77°C)

Product Construction

Backing Adhesive Color Standard Roll Length

Vinyl (transparent Rubber 3M™ Saf ety Strip Tape 36 yds. (33 m)

with stripes printed 5700 - black/white

on underside) 3M™ Saf ety Strip Tape

5702 - black/yellow

Standard Widths Available: Contact your authorized 3M distributor or 3M sales represenativ e.

Features • Resists most common solvents, but care must be taken to avoid ketones, esters and

chlorinated hydrocarbons which may cause backing to swell or degrade in the

intended product application.

• Avoid using on highly plasticized materials which may result in adhesive

softening and subsequent adhesion failure of tape.

• Best results are attained when applied to a clean, dry surface at temperatures

between 60° to 80°F (16° to 27°C).

Typical Physical

Properties Note: The follo wing technical information and data should be considered r epresentative

or typical only and should not be used for specification purposes.

A pplication Ideas • Excellent for many lane and safety marking applications.

• Helps identify hazard areas.

3M™Safety Strip Tapes

5700 • 5702

Shelf Life To obtain best performance, use this product within 18 months from date of

manufacture.

All statements, technical information and recommendations contained in this document are based upon

tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect

the use and performance of a 3M product in a particular application, including the conditions under

which the product is used and the time and environmental conditions in which the product is expected to

perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the

user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the

user’s method of application.

Product Use

Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging f or individual

products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the

product. Individual products may have additional or diff erent warranties as stated on product literature,

package inserts or product packages. 3M MAKES NO OTHER W ARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF

DEALING, CUST OM OR USAGE OF TRADE. User is responsible f or determining whether the 3M product

is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the

warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to

replace the product or refund the purchase price.

Warranty and

Limited Remedy

Printed in U.S .A.

Recycled Paper

40% pr e-consumer

10% post-consumer

Industrial Business

Industrial Adhesives and Tapes Division

3M Center, Building 21-1W-10, 900 Bush Avenue

St. Paul, MN 55144-1000

800-362-3550 • 877-369-2923 (fax)

www.3M.com/industrial

Storage Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in

the original carton.

Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the

3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory

asserted, including warranty, contract, negligence or strict liability.

Limitation of Liability

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.

ISO 9001: 2000