INTRODUCTION
MIL-PRF-123 specification covers the general requirements for high
reliability, general purpose (BX) and temperature stable (BP) ceramic
dielectric fixed capacitors for space, missile, and other high reliability
applications. Capacitors covered by MIL-PRF-123 may be used in
critical frequency determining applications, timing circuits, and other
applications where absolute stability is required (BP) and in applica-
tions where appreciable variations in capacitance with respect to
temperature, voltage, frequency, and life can be tolerated (BX).
SCREENING TESTS
Each lot has the following In-Process Inspections performed:
1. 100% C-SAM (C-Mode Surface Acoustical Microscopy)
2. In-Process Destructive Physical Analysis
3. 100% visual inspection at a minimum of 10X magnification
4. Pre-encapsulation terminal strength evaluation (leaded devices
only). Radial leaded capacitors must meet a minimum lead pull
of 1.8 kg (4.0 lbs.).
The following Group A shall be performed on each lot:
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 20 (100% of lot).
2. Voltage Conditioning—The voltage conditioning shall consist
of applying twice the rated voltage to the units at the maximum
rated temperature of 125°Cfor a minimum of 168 hours and a
maximum of 264 hours. The voltage conditioning may be termi-
nated at any time during 168 hours to 264 hours time interval
that confirmed failures meet the requirements for the PDA dur-
ing the last 48 hours listed in Table I below (100% of lot).
Optional Voltage Conditioning (Accelerated Voltage
Conditioning)—AII conditions of the standard voltage condi-
tioning apply with the exception of the increased voltage and the
decreased test time. (Refer to Mil-PRF-123 for formula.)
*Step 5 is performed on chips at this point (100% of lot).
3. Dielectric Withstanding Voltage 250% of the dc rated voltage
at 25°C (100% of lot).
4. Insulation Resistance—The 25°Cmeasurement with rated
voltage applied shall be the lesser of 100 GΩor 1000 megohm-
microfarads (100% of lot).
*5.Insulation Resistance—The 125°Cmeasurement with rated
voltage applied shall be the lesser of 10 GΩor 100 megohm-
microfarads (1000% of lot). For chips 125°CIR is performed
prior to step 3 above.
6. Storage at 150°C for 2 hours minimum without voltage applied
followed by a 12-hour minimum stabilization period (tempera-
ture characteristic BX only).
7. Capacitance must be within specified tolerance at 25°C (100%
of lot). Cap Exclusion: Capacitance values no more than 5% or
.5 pF, whichever is greater, for BX characteristics or 1% or .3 pF,
whichever is greater, for BP characteristics beyond specified tol-
erance limit shall be removed from the lot but shall not be con-
sidered defective for determination of the PDA.
8. Dissipation Factor shall not exceed 2.5% for X dielectric,
0.15% for G dielectric at 25°C (100% of lot).
9. Percent Defective Allowable (PDA). The following table lists
the PDA requirements for MIL-PRF-123 Group A:
TABLE I
KEMET MIL BURN IN PDA PDA
STYLE STYLE LAST 48 HOURS OVERALL
C052Z CKS05 1unit or 0.1% 3%
C062Z CKS06 1 unit or 0.2% 5%
C512Z CKS07 1 unit or 0.2% 5%
C0805Z CKS51 1unit or 0.1% 3%
C1210Z CKS52 1 unit or 0.1% 3%
C1808Z CKS53 1unit or 0.1% 3%
C2225Z CKS54 1 unit or 0.1% 3%
C1206Z CKS55 1 unit or 0.1% 3%
C1812Z CKS56 1unit or 0.1% 3%
C1825Z CKS57 1 unit or 0.1% 3%
10. Radiographic Inspection (leaded devices only) (100% of lot).
11. Visual Inspection per MIL-PRF-123 criteria.
12. Destructive Physical Analysis per EIA-469 and MIL-PRF-123.
SAMPLE TESTS
The following Group B tests shall be performed on samples from
each lot, which have been subjected to and have passed Group A
inspection.
1. Thermal Shock—Performed in accordance to MIL-STD-202,
Method 107, Condition A, with step 3 being 125°C. Number of
cycles shall be 100.
2. Life Test per MIL-5TD-202, Method 108. Test temperature and
tolerance is +125°C +4, -0°C. Capacitors shall be subjected to
2X rated voltage for 1000 hours.
3. Humidity, steady state, low voltage per MIL-STD-202,
Method 103, Condition A. Capacitors shall be subjected to an
environment of 85°C with 85% relative humidity for 240 hours
minimum. Cycling shall not be performed. A dc potential of 1.3
±0.25 volts shall be applied continuously through a 100,000
ohm resistance to each device under test. At completion, 25°C
IR and Cap are read.
4. Voltage-temperature limits—Capacitance is measured at var-
ious temperatures (-55°C to +125°C) with and without rated
voltage.
5. Moisture Resistance per MIL-STD-202, Method 106. There
shall be 20 continuous cycles. During the first 10 cycles only, a
dc potential of 50 volts shall be applied across the capacitor ter-
minals. Once each day, a check shall be performed to deter-
mine whether a capacitor has shorted. Vibration cycle of MIL-
STD-202, Method 106, Step 7b shall not be performed. Upon
completion of MIL-STD-202, Method 106, Step 6 of the final
cycle, capacitors shall be measured for capacitance, dielectric
withstanding voltage and insulation resistance.
The following Group C tests shall be performed on samples selected
from lots that have passed Group A and have been submitted for
Group B inspection. Samples shall be selected every two months.
1. Terminal Strength
2. Solderability
3. Resistance to Soldering Heat
4. Solvent Resistance (Leaded devices only)
All lots shipped must have been subjected to and passed Group A
and B testing.
STANDARD PACKAGING FOR
MIL-PRF-123 IS AS FOLLOWS:
C052Z tray C0805Z chip tray
C062Z tray C1206Z chip tray
C512Z 1pc. per bag C1210Z chip tray
C1808Z chip tray
C1812Z chip tray
C1825Z chip tray
C2225Z chip tray
DATA PACKAGE
A data package is sent with each shipment which contains:
1. Summary of Group A testing
2. Summary of Group B testing
3. Group B Variables Test Data
4. Lead Pull Data (Leaded Devices Only)
5. Final Destructive Physical Analysis Report
6. Certificate of Compliance stating that the ceramic capacitors
supplied meet all the requirements of MIL-PRF-123, the applic-
able slash sheet(s) and all associated documents.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 5
CERAMIC HIGH RELIABILITY MOLDED & CHIPS
GENERAL INFORMATION MIL-PRF-123
CAPACITOR OUTLINE DRAWINGS
KEMET ORDERING INFORMATION
C0805 Z 101 K 5 G A H
MARKING
Capacitors shall be legibly laser
marked in contrasting color with
the KEMET trademark and
2-digit capacitance symbol.
Termination
H=Nickel Guarded, Solder-Coated (Solderguard I)
L = 70/30 Tin/Lead Plated (4Q2007)
Failure Rate
(%/1000 Hours)
A-Standard — Not Applicable
Temperature Characteristic
KEMET Military Temp. Measured Without Measured With Bias
Designator Equivalent Range, °C DC BiasVoltage (Rated Voltage)
G -55 to ±30 ±30
(Ultra Stable) BP +125 ppm °C ppm °C
XBX -55 to ±15% +15%
(Stable) +125 -25%
M123 A 10 BX B 472 K S
Military Specification
Number
Modification Number
Indicates the latest characteristics of
the part in the specification sheet.
MIL-PRF-123 Slash
Sheet Number
Slash KEMET MIL-PRF-123
Sheet# Style Style
10 C0805 CKS51
11 C1210 CKS52
12 C1808 CKS53
13 C2225 CKS54
21 C1206 CKS55
22 C1812 CKS56
23 C1825 CKS57
Termination
S-SnPb 60/40
Z-SnPb 70/30
Tolerance
C - ±0.25pF; D - ±0.5pF; F - ±1%; J - ±5%; K - ±10%
Capacitance Picofarad Code
Voltage
B - 50; C - 100
TemperatureCharacteristic
Capacitance Change with Temperature
KEMET Military EIA Temp. Measured Without Measured With Bias
Designator Equivalent Equivalent Range, °C DC BiasVoltage (Rated Voltage)
G BP C0G -55 to ±30 ±30
(Ultra Stable) (NPO) +125 ppm °C ppm °C
X BX X7R -55 to ±15% +15%
(Stable) +125 -25%
DIMENSIONS — INCHES
Ceramic
Chip Size
0805, 1206, 1210, 1808, 1812, 1825, 2225
Specification
Z—Mil-PRF-123
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Capacitance Tolerance
C— ±0.25pF J— ±5%
D— ±0.5 pF K— ±10%
F— ±1%
Working Voltage
5—50; 1 — 100
Military Designation - “S”; KEMET Designation - “H”
Temperature Characteristic
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 9
CERAMIC CHIP/MIL-PRF-123
Chip
Size
Military
Equivalent
Styles
L
Length
W
Width
T
Thickness
Maximum
0805 CKS51 0.080 + 0.035 - 0.015 0.050 + 0.030 - 0.015 0.070
1210 CKS52 0.120 + 0.040 - 0.015 0.100 + 0.030 - 0.015 0.080
1808 CKS53 0.180 + 0.040 - 0.015 0.080 + 0.030 - 0.015 0.080
2225 CKS54 0.220 + 0.040 - 0.015 0.250 + 0.030 - 0.015 0.085
1206 CKS55 0.120 + 0.040 - 0.015 0.060 + 0.030 - 0.015 0.080
1812 CKS56 0.180 + 0.040 - 0.015 0.125 + 0.030 - 0.015 0.095
1825 CKS57 0.180 + 0.040 - 0.015 + 0.030 - 0.015 0.095
0.250
RATINGS AND PART NUMBER REFERENCE
To complete the KEMET part numbers, insert the following tolerances:
(1) C = ±0.25pF; D = ±0.5pF
(2) C = ±0.25pF; J = ±5%; K = ±10%
(3) F = ±1%; J = ±5%; K = ±10%
(4) B = ±0.1pF; C = ±0.25pF%
(5) B = ±0.1pF; C = ±.25pF; D = ±0.50pF
(6) K = ±10%; M = ±20%
Tocomplete the KEMET part numbers, insert the following voltage:
(7) B = 50 volts; C = 100 volts
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
10
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
1.0
C0805Z109(1)(7)GAH
M123A10BP(7)1R0(1)S
1.1
C0805Z119(1)(7)GAH
M123A10BP(7)1R1(1)S
1.2
C0805Z129(1)(7)GAH
M123A10BP(7)1R2(1)S
1.3
C0805Z139(1)(7)GAH
M123A10BP(7)1R3(1)S
1.5
C0805Z159(1)(7)GAH
M123A10BP(7)1R5(1)S
1.6
C0805Z169(1)(7)GAH
M123A10BP(7)1R6(1)S
1.8
C0805Z189(1)(7)GAH
M123A10BP(7)1R8(1)S
2.0
C0805Z209(1)(7)GAH
M123A10BP(7)2R0(1)S
2.2
C0805Z229(1)(7)GAH
M123A10BP(7)2R2(1)S
2.4
C0805Z249(1)(7)GAH
M123A10BP(7)2R4(1)S
2.7
C0805Z279(1)(7)GAH
M123A10BP(7)2R7(1)S
3.0
C0805Z309(1)(7)GAH
M123A10BP(7)3R0(1)S
3.3
C0805Z339(1)(7)GAH
M123A10BP(7)3R3(1)S
3.6
C0805Z369(1)(7)GAH
M123A10BP(7)3R6(1)S
3.9
C0805Z399(1)(7)GAH
M123A10BP(7)3R9(1)S
4.3
C0805Z439(1)(7)GAH
M123A10BP(7)4R3(1)S
4.7
C0805Z479(1)(7)GAH
M123A10BP(7)4R7(1)S
5.1
C0805Z519(1)(7)GAH
M123A10BP(7)5R1(1)S
5.6
C0805Z569(1)(7)GAH
M123A10BP(7)5R6(1)S
6.2
C0805Z629(1)(7)GAH
M123A10BP(7)6R2(1)S
6.8
C0805Z689(1)(7)GAH
M123A10BP(7)6R8(1)S
7.5
C0805Z759(1)(7)GAH
M123A10BP(7)7R5(1)S
8.2
C0805Z829(1)(7)GAH
M123A10BP(7)8R2(1)S
9.1
C0805Z919(1)(7)GAH
M123A10BP(7)9R1(1)S
10.0
C0805Z100(2)(7)GAH
M123A10BP(7)100(2)S
11.0
C0805Z110(2)(7)GAH
M123A10BP(7)110(2)S
12.0
C0805Z120(2)(7)GAH
M123A10BP(7)120(2)S
13.0
C0805Z130(2)(7)GAH
M123A10BP(7)130(2)S
15.0
C0805Z150(2)(7)GAH
M123A10BP(7)150(2)S
16.0
C0805Z160(2)(7)GAH
M123A10BP(7)160(2)S
18.0
C0805Z180(2)(7)GAH
M123A10BP(7)180(2)S
20.0
C0805Z200(2)(7)GAH
M123A10BP(7)200(2)S
22.0
C0805Z220(2)(7)GAH
M123A10BP(7)220(2)S
24.0
C0805Z240(2)(7)GAH
M123A10BP(7)240(2)S
27.0
C0805Z270(3)(7)GAH
M123A10BP(7)270(3)S
30.0
C0805Z300(3)(7)GAH
M123A10BP(7)300(3)S
33.0
C0805Z330(3)(7)GAH
M123A10BP(7)330(3)S
36.0
C0805Z360(3)(7)GAH
M123A10BP(7)360(3)S
39.0
C0805Z390(3)(7)GAH
M123A10BP(7)390(3)S
43.0
C0805Z430(3)(7)GAH
M123A10BP(7)430(3)S
47.0
C0805Z470(3)(7)GAH
M123A10BP(7)470(3)S
51.0
C0805Z510(3)(7)GAH
M123A10BP(7)510(3)S
56.0
C0805Z560(3)(7)GAH
M123A10BP(7)560(3)S
62.0
C0805Z620(3)(7)GAH
M123A10BP(7)620(3)S
68.0
C0805Z680(3)(7)GAH
M123A10BP(7)680(3)S
75.0
C0805Z750(3)(7)GAH
M123A10BP(7)750(3)S
82.0
C0805Z820(3)(7)GAH
M123A10BP(7)820(3)S
91.0
C0805Z910(3)(7)GAH
M123A10BP(7)910(3)S
100.0
C0805Z101(3)(7)GAH
M123A10BP(7)101(3)S
110.0
C0805Z111(3)(7)GAH
M123A10BP(7)111(3)S
120.0
C0805Z121(3)(7)GAH
M123A10BP(7)121(3)S
130.0
C0805Z131(3)(7)GAH
M123A10BP(7)131(3)S
150.0
C0805Z151(3)(7)GAH
M123A10BP(7)151(3)S
160.0
C0805Z161(3)(7)GAH
M123A10BP(7)161(3)S
180.0
C0805Z181(3)(7)GAH
M123A10BP(7)181(3)S
200.0
C0805Z201(3)(7)GAH
M123A10BP(7)201(3)S
220.0
C0805Z221(3)(7)GAH
M123A10BP(7)221(3)S
240.0
C0805Z241(3)(7)GAH
M123A10BP(7)241(3)S
270.0
C0805Z271(3)(7)GAH
M123A10BP(7)271(3)S
300.0
C0805Z301(3)(7)GAH
M123A10BP(7)301(3)S
330.0
C0805Z331(3)(7)GAH
M123A10BP(7)331(3)S
360.0
C0805Z361(3)(7)GAH
M123A10BP(7)361(3)S
390.0
C0805Z391(3)(7)GAH
M123A10BP(7)391(3)S
430.0
C0805Z431(3)(7)GAH
M123A10BP(7)431(3)S
470.0
C0805Z471(3)(7)GAH
M123A10BP(7)471(3)S
CAP.
pF
MIL-PRF-123
PART NUMBER
50/100 VOLT- BP-C0805 SIZE (MILITARY CKS51)
KEMET
PART NUMBER
300.0
C1210Z301(3)(7)GAH
M123A11BP(7)301(3)S
330.0
C1210Z331(3)(7)GAH
M123A11BP(7)331(3)S
360.0
C1210Z361(3)(7)GAH
M123A11BP(7)361(3)S
390.0
C1210Z391(3)(7)GAH
M123A11BP(7)391(3)S
430.0
C1210Z431(3)(7)GAH
M123A11BP(7)431(3)S
470.0
C1210Z471(3)(7)GAH
M123A11BP(7)471(3)S
510.0
C1210Z511(3)(7)GAH
M123A11BP(7)511(3)S
560.0
C1210Z561(3)(7)GAH
M123A11BP(7)561(3)S
620.0
C1210Z621(3)(7)GAH
M123A11BP(7)621(3)S
680.0
C1210Z681(3)(7)GAH
M123A11BP(7)681(3)S
750.0
C1210Z751(3)(7)GAH
M123A11BP(7)751(3)S
820.0
C1210Z821(3)(7)GAH
M123A11BP(7)821(3)S
910.0
C1210Z911(3)(7)GAH
M123A11BP(7)911(3)S
1,000.0
C1210Z102(3)(7)GAH
M123A11BP(7)102(3)S
1,100.0
C1210Z112(3)(7)GAH
M123A11BP(7)112(3)S
1,200.0
C1210Z122(3)(7)GAH
M123A11BP(7)122(3)S
1,300.0
C1210Z132(3)(7)GAH
M123A11BP(7)132(3)S
1,500.0
C1210Z152(3)(7)GAH
M123A11BP(7)152(3)S
1,600.0
C1210Z162(3)(7)GAH
M123A11BP(7)162(3)S
1,800.0
C1210Z182(3)(7)GAH
M123A11BP(7)182(3)S
2,000.0
C1210Z202(3)(7)GAH
M123A11BP(7)202(3)S
2,200.0
C1210Z222(3)(7)GAH
M123A11BP(7)222(3)S
2,400.0
C1210Z242(3)5GAH
M123A11BPB242(3)S
2,700.0
C1210Z272(3)5GAH
M123A11BPB272(3)S
3,000.0
C1210Z302(3)5GAH
M123A11BPB302(3)S
3,300.0
C1210Z332(3)5GAH
M123A11BPB332(3)S
5,600.0
C1210Z562(6)(7)XAH
M123A11BX(7)562(6)S
6,800.0
C1210Z682(6)(7)XAH
M123A11BX(7)682(6)S
8,200.0
C1210Z822(6)(7)XAH
M123A11BX(7)822(6)S
10,000.0
C1210Z103(6)(7)XAH
M123A11BX(7)103(6)S
12,000.0
C1210Z123(6)(7)XAH
M123A11BX(7)123(6)S
15,000.0
C1210Z153(6)(7)XAH
M123A11BX(7)153(6)S
18,000.0
C1210Z183(6)(7)XAH
M123A11BX(7)183(6)S
22,000.0
C1210Z223(6)(7)XAH
M123A11BX(7)223(6)S
27,000.0
C1210Z273(6)(7)XAH
M123A11BX(7)273(6)S
33,000.0
C1210Z333(6)5XAH
M123A11BXB333(6)S
39,000.0
C1210Z393(6)5XAH
M123A11BXB393(6)S
47,000.0
C1210Z473(6)5XAH
M123A11BXB473(6)S
56,000.0
C1210Z563(6)5XAH
M123A11BXB563(6)S
68,000.0
C1210Z683(6)5XAH
M123A11BXB683(6)S
82,000.0
C1210Z823(6)5XAH
M123A11BXB823(6)S
100,000.0
C1210Z104(6)5XAH
M123A11BXB104(6)S
50/100 VOLT-BP-C1210 SIZE (MILITARY CKS52)
50 VOLT-BP-C1210 SIZE (MILITARY CKS52)
KEMET
PART NUMBER
50 VOLT-BX-C1210 SIZE (MILITARY CKS52)
50/100 VOLT-BX-C1210 SIZE (MILITARY CKS52)
CAP.
pF
MIL-PRF-123
PART NUMBER
300.0
C1808Z301(3)(7)GAH
M123A12BP(7)301(3)S
330.0
C1808Z331(3)(7)GAH
M123A12BP(7)331(3)S
360.0
C1808Z361(3)(7)GAH
M123A12BP(7)361(3)S
390.0
C1808Z391(3)(7)GAH
M123A12BP(7)391(3)S
430.0
C1808Z431(3)(7)GAH
M123A12BP(7)431(3)S
470.0
C1808Z471(3)(7)GAH
M123A12BP(7)471(3)S
510.0
C1808Z511(3)(7)GAH
M123A12BP(7)511(3)S
560.0
C1808Z561(3)(7)GAH
M123A12BP(7)561(3)S
620.0
C1808Z621(3)(7)GAH
M123A12BP(7)621(3)S
680.0
C1808Z681(3)(7)GAH
M123A12BP(7)681(3)S
750.0
C1808Z751(3)(7)GAH
M123A12BP(7)751(3)S
820.0
C1808Z821(3)(7)GAH
M123A12BP(7)821(3)S
910.0
C1808Z911(3)(7)GAH
M123A12BP(7)911(3)S
1,000.0
C1808Z102(3)(7)GAH
M123A12BP(7)102(3)S
5,600.0
C1808Z562K(7)XAH
M123A12BX(7)562KS
6,800.0
C1808Z682K(7)XAH
M123A12BX(7)682KS
8,200.0
C1808Z822K(7)XAH
M123A12BX(7)822KS
10,000.0
C1808Z103K(7)XAH
M123A12BX(7)103KS
12,000.0
C1808Z123K(7)XAH
M123A12BX(7)123KS
15,000.0
C1808Z153K(7)XAH
M123A12BX(7)153KS
18,000.0
C1808Z183K(7)XAH
M123A12BX(7)183KS
22,000.0
C1808Z223K(7)XAH
M123A12BX(7)223KS
27,000.0
C1808Z273K(7)XAH
M123A12BX(7)273KS
33,000.0
C1808Z333K(7)XAH
M123A12BX(7)333KS
39,000.0
C1808Z393K5XAH
M123A12BXB393KS
47,000.0
C1808Z473K5XAH
M123A12BXB473KS
56,000.0
C1808Z563K5XAH
M123A12BXB563KS
68,000.0
C1808Z683K5XAH
M123A12BXB683KS
82,000.0
C1808Z823K5XAH
M123A12BXB823KS
100,000.0
C1808Z104K5XAH
M123A12BXB104KS
50 VOLT-BX-C1808 SIZE (MILITARY CKS53)
50/100 VOLT-BP-C1808 SIZE (MILITARY CKS53)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50/100 VOLT-BX-C1808 SIZE (MILITARY CKS53)
1,100.0
C2225Z112(3)5GAH
M123A13BPB112(3)S
1,200.0
C2225Z122(3)5GAH
M123A13BPB122(3)S
1,300.0
C2225Z132(3)5GAH
M123A13BPB132(3)S
1,500.0
C2225Z152(3)5GAH
M123A13BPB152(3)S
1,600.0
C2225Z162(3)5GAH
M123A13BPB162(3)S
1,800.0
C2225Z182(3)5GAH
M123A13BPB182(3)S
2,000.0
C2225Z202(3)5GAH
M123A13BPB202(3)S
2,200.0
C2225Z222(3)5GAH
M123A13BPB222(3)S
2,400.0
C2225Z242(3)5GAH
M123A13BPB242(3)S
2,700.0
C2225Z272(3)5GAH
M123A13BPB272(3)S
3,000.0
C2225Z302(3)5GAH
M123A13BPB302(3)S
3,300.0
C2225Z332(3)5GAH
M123A13BPB332(3)S
3,600.0
C2225Z362(3)5GAH
M123A13BPB362(3)S
3,900.0
C2225Z392(3)5GAH
M123A13BPB392(3)S
4,300.0
C2225Z432(3)5GAH
M123A13BPB432(3)S
4,700.0
C2225Z472(3)5GAH
M123A13BPB472(3)S
5,100.0
C2225Z512(3)5GAH
M123A13BPB512(3)S
5,600.0
C2225Z562(3)5GAH
M123A13BPB562(3)S
6,200.0
C2225Z622(3)5GAH
M123A13BPB622(3)S
6,800.0
C2225Z682(3)5GAH
M123A13BPB682(3)S
7,500.0
C2225Z752(3)5GAH
M123A13BPB752(3)S
8,200.0
C2225Z822(3)5GAH
M123A13BPB822(3)S
9,100.0
C2225Z912(3)5GAH
M123A13BPB912(3)S
10,000.0
C2225Z103(3)5GAH
M123A13BPB103(3)S
120,000.0
C2225Z124K5XAH
M123A13BXB124KS
150,000.0
C2225Z154K5XAH
M123A13BXB154KS
180,000.0
C2225Z184K5XAH
M123A13BXB184KS
220,000.0
C2225Z224K5XAH
M123A13BXB224KS
270,000.0
C2225Z274K5XAH
M123A13BXB274KS
330,000.0
C2225Z334K5XAH
M123A13BXB334KS
390,000.0
C2225Z394K5XAH
M123A13BXB394KS
470,000.0
C2225Z474K5XAH
M123A13BXB474KS
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
50 VOLT-BP-C2225 SIZE (MILITARY CKS54)
510.0
C0805Z511(3)5GAH
M123A10BPB511(3)S
560.0
C0805Z561(3)5GAH
M123A10BPB561(3)S
620.0
C0805Z621(3)5GAH
M123A10BPB621(3)S
680.0
C0805Z681(3)5GAH
M123A10BPB681(3)S
330.0
C0805Z331K(7)XAH
M123A10BX(7)331KS
390.0
C0805Z391K(7)XAH
M123A10BX(7)391KS
470.0
C0805Z471K(7)XAH
M123A10BX(7)471KS
560.0
C0805Z561K(7)XAH
M123A10BX(7)561KS
680.0
C0805Z681K(7)XAH
M123A10BX(7)681KS
820.0
C0805Z821K(7)XAH
M123A10BX(7)821KS
1,000.0
C0805Z102K(7)XAH
M123A10BX(7)102KS
1,200.0
C0805Z122K(7)XAH
M123A10BX(7)122KS
1,500.0
C0805Z152K(7)XAH
M123A10BX(7)152KS
1,800.0
C0805Z182K(7)XAH
M123A10BX(7)182KS
2,200.0
C0805Z222K(7)XAH
M123A10BX(7)222KS
2,700.0
C0805Z272K(7)XAH
M123A10BX(7)272KS
3,300.0
C0805Z332K(7)XAH
M123A10BX(7)332KS
3,900.0
C0805Z392K(7)XAH
M123A10BX(7)392KS
4,700.0
C0805Z472K(7)XAH
M123A10BX(7)472KS
5,600.0
C0805Z562K5XAH
M123A10BXB562KS
6,800.0
C0805Z682K5XAH
M123A10BXB682KS
8,200.0
C0805Z822K5XAH
M123A10BXB822KS
10,000.0
C0805Z103K5XAH
M123A10BXB103KS
12,000.0
C0805Z123K5XAH
M123A10BXB123KS
15,000.0
C0805Z153K5XAH
M123A10BXB153KS
18,000.0
C0805Z183K5XAH
M123A10BXB183KS
To complete the part numbers, insert the following tolerances:
(1) C, ±0.25pF; D, ±0.5pF
(2) C, ±0.25pF; J, ±5%; K, ±10%
(3) F, ±1%; J, ±5%; K, ±10%
To complete the part numbers, insert the following voltages:
(7) B = 50V; C = 100V
50 VOLT-BP-C0805 SIZE (MILITARY CKS51)
50/100 VOLT-BX-C0805 SIZE (MILITARY CKS51)
50 VOLT-BX-C0805 SIZE (MILITARY CKS51)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
RATINGS AND PART NUMBER REFERENCE
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 11
1.0
C1206Z109(4)1GAH
M123A21BPC1R0(4)S
1.1
C1206Z119(4)1GAH
M123A21BPC1R1(4)S
1.2
C1206Z129(4)1GAH
M123A21BPC1R2(4)S
1.3
C1206Z139(4)1GAH
M123A21BPC1R3(4)S
1.5
C1206Z159(4)1GAH
M123A21BPC1R5(4)S
1.6
C1206Z169(4)1GAH
M123A21BPC1R6(4)S
1.8
C1206Z189(4)1GAH
M123A21BPC1R8(4)S
2.0
C1206Z209(4)1GAH
M123A21BPC2R0(4)S
2.2
C1206Z229(4)1GAH
M123A21BPC2R2(4)S
2.4
C1206Z249(4)1GAH
M123A21BPC2R4(4)S
2.7
C1206Z279(5)1GAH
M123A21BPC2R7(5)S
3.0
C1206Z309(5)1GAH
M123A21BPC3R0(5)S
3.3
C1206Z339(5)1GAH
M123A21BPC3R3(5)S
3.6
C1206Z369(5)1GAH
M123A21BPC3R6(5)S
3.9
C1206Z399(5)1GAH
M123A21BPC3R9(5)S
4.3
C1206Z439(5)1GAH
M123A21BPC4R3(5)S
4.7
C1206Z479(5)1GAH
M123A21BPC4R7(5)S
5.1
C1206Z519(5)1GAH
M123A21BPC5R1(5)S
5.6
C1206Z569(5)1GAH
M123A21BPC5R6(5)S
6.2
C1206Z629(5)1GAH
M123A21BPC6R2(5)S
6.8
C1206Z689(5)1GAH
M123A21BPC6R8(5)S
7.5
C1206Z759(5)1GAH
M123A21BPC7R5(5)S
8.2
C1206Z829(5)1GAH
M123A21BPC8R2(5)S
9.1
C1206Z919(5)1GAH
M123A21BPC9R1(5)S
10.0
C1206Z100(3)1GAH
M123A21BPC100(3)S
11.0
C1206Z110(3)1GAH
M123A21BPC110(3)S
12.0
C1206Z120(3)1GAH
M123A21BPC120(3)S
13.0
C1206Z130(3)1GAH
M123A21BPC130(3)S
15.0
C1206Z150(3)1GAH
M123A21BPC150(3)S
16.0
C1206Z160(3)1GAH
M123A21BPC160(3)S
18.0
C1206Z180(3)1GAH
M123A21BPC180(3)S
20.0
C1206Z200(3)1GAH
M123A21BPC200(3)S
24.0
C1206Z240(3)1GAH
M123A21BPC240(3)S
27.0
C1206Z270(3)1GAH
M123A21BPC270(3)S
33.0
C1206Z330(3)1GAH
M123A21BPC330(3)S
36.0
C1206Z360(3)1GAH
M123A21BPC360(3)S
39.0
C1206Z390(3)1GAH
M123A21BPC390(3)S
43.0
C1206Z430(3)1GAH
M123A21BPC430(3)S
47.0
C1206Z470(3)1GAH
M123A21BPC470(3)S
51.0
C1206Z510(3)1GAH
M123A21BPC510(3)S
56.0
C1206Z560(3)1GAH
M123A21BPC560(3)S
62.0
C1206Z620(3)1GAH
M123A21BPC620(3)S
68.0
C1206Z680(3)1GAH
M123A21BPC680(3)S
75.0
C1206Z750(3)1GAH
M123A21BPC750(3)S
82.0
C1206Z820(3)1GAH
M123A21BPC820(3)S
91.0
C1206Z910(3)1GAH
M123A21BPC910(3)S
100.0
C1206Z101(3)1GAH
M123A21BPC101(3)S
110.0
C1206Z111(3)1GAH
M123A21BPC111(3)S
120.0
C1206Z121(3)1GAH
M123A21BPC121(3)S
130.0
C1206Z131(3)1GAH
M123A21BPC131(3)S
150.0
C1206Z151(3)1GAH
M123A21BPC151(3)S
160.0
C1206Z161(3)1GAH
M123A21BPC161(3)S
180.0
C1206Z181(3)1GAH
M123A21BPC181(3)S
200.0
C1206Z201(3)1GAH
M123A21BPC201(3)S
220.0
C1206Z221(3)1GAH
M123A21BPC221(3)S
240.0
C1206Z241(3)1GAH
M123A21BPC241(3)S
270.0
C1206Z271(3)1GAH
M123A21BPC271(3)S
300.0
C1206Z301(3)1GAH
M123A21BPC301(3)S
330.0
C1206Z331(3)1GAH
M123A21BPC331(3)S
360.0
C1206Z361(3)1GAH
M123A21BPC361(3)S
390.0
C1206Z391(3)1GAH
M123A21BPC391(3)S
430.0
C1206Z431(3)1GAH
M123A21BPC431(3)S
470.0
C1206Z471(3)1GAH
M123A21BPC471(3)S
510.0
C1206Z511(3)1GAH
M123A21BPC511(3)S
560.0
C1206Z561(3)1GAH
M123A21BPC561(3)S
620.0
C1206Z621(3)1GAH
M123A21BPC621(3)S
680.0
C1206Z681(3)1GAH
M123A21BPC681(3)S
750.0
C1206Z751(3)1GAH
M123A21BPC751(3)S
820.0
C1206Z821(3)1GAH
M123A21BPC821(3)S
910.0
C1206Z911(3)1GAH
M123A21BPC911(3)S
1000.0
C1206Z102(3)1GAH
M123A21BPC102(3)S
100 VOLT - BP - C1206 SIZE (MILITARY CKS55)
MIL-PRF-123
PART NUMBER
CAP.
pF
KEMET
PART NUMBER
1,200.0
C1812Z122(3)1GAH
M123A22BPC122(3)S
2,200.0
C1812Z222(3)1GAH
M123A22BPC222(3)S
2,400.0
C1812Z242(3)1GAH
M123A22BPC242(3)S
2,700.0
C1812Z272(3)1GAH
M123A22BPC272(3)S
3,000.0
C1812Z302(3)1GAH
M123A22BPC302(3)S
3,300.0
C1812Z332(3)1GAH
M123A22BPC332(3)S
3,600.0
C1812Z362(3)1GAH
M123A22BPC362(3)S
3,900.0
C1812Z392(3)1GAH
M123A22BPC392(3)S
4,300.0
C1812Z432(3)1GAH
M123A22BPC432(3)S
4,700.0
C1812Z472(3)1GAH
M123A22BPC472(3)S
5,100.0
C1812Z512(3)5GAH
M123A22BPB512(3)S
5,600.0
C1812Z562(3)5GAH
M123A22BPB562(3)S
6,200.0
C1812Z622(3)5GAH
M123A22BPB622(3)S
6,800.0
C1812Z682(3)5GAH
M123A22BPB682(3)S
7,500.0
C1812Z752(3)5GAH
M123A22BPB752(3)S
8,200.0
C1812Z822(3)5GAH
M123A22BPB822(3)S
9,100.0
C1812Z912(3)5GAH
M123A22BPB912(3)S
10,000.0
C1812Z103(3)5GAH
M123A22BPB103(3)S
27,000.0
C1812Z273(6)1XAH
M123A22BXC273(6)S
33,000.0
C1812Z333(6)1XAH
M123A22BXC333(6)S
39,000.0
C1812Z393(6)1XAH
M123A22BXC393(6)S
47,000.0
C1812Z473(6)1XAH
M123A22BXC473(6)S
56,000.0
C1812Z563(6)1XAH
M123A22BXC563(6)S
100,000.0
C1812Z104(6)5XAH
M123A22BXB104(6)S
120,000.0
C1812Z124(6)5XAH
M123A22BXB124(6)S
150,000.0
C1812Z154(6)5XAH
M123A22BXB154(6)S
180,000.0
C1812Z184(6)5XAH
M123A22BXB184(6)S
To complete the part numbers, insert the following tolerances:
(3)
F, ±1%; J, ±5%; K, ±10%
(6)
K, ±10%; M, ±20%
50 VOLT-BX-C1812 SIZE (MILITARY CKS56)
100 VOLT-BP-C1812 SIZE (MILITARY CKS56)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
100 VOLT-BX-C1812 SIZE (MILITARY CKS56)
50 VOLT-BP-C1812 SIZE (MILITARY CKS56)
CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC)
3,900.0
C1825Z392(3)1GAH
M123A23BPC392(3)S
4,700.0
C1825Z472(3)1GAH
M123A23BPC472(3)S
5,100.0
C1825Z512(3)1GAH
M123A23BPC512(3)S
5,600.0
C1825Z562(3)1GAH
M123A23BPC562(3)S
6,200.0
C1825Z622(3)1GAH
M123A23BPC622(3)S
6,800.0
C1825Z682(3)1GAH
M123A23BPC682(3)S
7,500.0
C1825Z752(3)1GAH
M123A23BPC752(3)S
8,200.0
C1825Z822(3)1GAH
M123A23BPC822(3)S
9,100.0
C1825Z912(3)1GAH
M123A23BPC912(3)S
10,000.0
C1825Z103(3)1GAH
M123A23BPC103(3)S
11,000.0
C1825Z113(3)5GAH
M123A23BPB113(3)S
12,000.0
C1825Z123(3)5GAH
M123A23BPB123(3)S
13,000.0
C1825Z133(3)5GAH
M123A23BPB133(3)S
15,000.0
C1825Z153(3)5GAH
M123A23BPB153(3)S
16,000.0
C1825Z163(3)5GAH
M123A23BPB163(3)S
18,000.0
C1825Z183(3)5GAH
M123A23BPB183(3)S
20,000.0
C1825Z203(3)5GAH
M123A23BPB203(3)S
22,000.0
C1825Z223(3)5GAH
M123A23BPB223(3)S
56,000.0
C1825Z563(6)1XAH
M123A23BXC563(6)S
68,000.0
C1825Z683(6)1XAH
M123A23BXC683(6)S
82,000.0
C1825Z823(6)1XAH
M123A23BXC823(6)S
100,000.0
C1825Z104(6)1XAH
M123A23BXC104(6)S
120,000.0
C1825Z124(6)1XAH
M123A23BXC124(6)S
150,000.0
C1825Z154(6)1XAH
M123A23BXC154(6)S
180,000.0
C1825Z184(6)5XAH
M123A23BXB184(6)S
220,000.0
C1825Z224(6)5XAH
M123A23BXB224(6)S
270,000.0
C1825Z274(6)5XAH
M123A23BXB274(6)S
330,000.0
C1825Z334(6)5XAH
M123A23BXB334(6)S
390,000.0
C1825Z394(6)5XAH
M123A23BXB394(6)S
470,000.0
C1825Z474(6)5XAH
M123A23BXB474(6)S
50 VOLT-BP-C1812 SIZE (MILITARY CKS57)
100 VOLT-BX-C1825 SIZE (MILITARY CKS57)
50 VOLT-BX-C1825 SIZE (MILITARY CKS57)
CAP.
pF
MIL-PRF-123
PART NUMBER
100 VOLT-BP-C1825 SIZE (MILITARY CKS57)
KEMET
PART NUMBER
1,100.0
C1206Z112(3)5GAH
M123A21BPB112(3)S
1,200.0
C1206Z122(3)5GAH
M123A21BPB122(3)S
1,300.0
C1206Z132(3)5GAH
M123A21BPB132(3)S
1,500.0
C1206Z152(3)5GAH
M123A21BPB152(3)S
1,600.0
C1206Z162(3)5GAH
M123A21BPB162(3)S
1,800.0
C1206Z182(3)5GAH
M123A21BPB182(3)S
2,000.0
C1206Z202(3)5GAH
M123A21BPB202(3)S
2,200.0
C1206Z222(3)5GAH
M123A21BPB222(3)S
4,700.0
C1206Z472(6)1XAH
M123A21BXC472(6)S
5,600.0
C1206Z562(6)1XAH
M123A21BXC562(6)S
6,800.0
C1206Z682(6)1XAH
M123A21BXC682(6)S
8,200.0
C1206Z822(6)1XAH
M123A21BXC822(6)S
10,000.0
C1206Z103(6)1XAH
M123A21BXC103(6)S
12,000.0
C1206Z123(6)1XAH
M123A21BXC123(6)S
15,000.0
C1206Z153(6)1XAH
M123A21BXC153(6)S
18,000.0
C1206Z183(6)5XAH
M123A21BXB183(6)S
22,000.0
C1206Z223(6)5XAH
M123A21BXB223(6)S
27,000.0
C1206Z273(6)5XAH
M123A21BXB273(6)S
33,000.0
C1206Z333(6)5XAH
M123A21BXB333(6)S
39,000.0
C1206Z393(6)5XAH
M123A21BXB393(6)S
100 VOLT-BX-C1206 SIZE (MILITARY CKS55)
50 VOLT-BX-C1206 SIZE (MILITARY CKS55)
50 VOLT-BP-C1206 SIZE (MILITARY CKS55)
CAP.
pF
KEMET
PART NUMBER
MIL-PRF-123
PART NUMBER
Tocomplete the KEMET part numbers, insert the following tolerances:
(1) C = ±0.25pF; D = ±0.5pF
(2) C = ±0.25pF; J = ±5%; K = ±10%
(3) F = ±1%; J = ±5%; K = ±10%
(4) B = ±0.1pF; C = ±0.25pF%
(5) B = ±0.1pF; C = ±.25pF; D = ±0.50pF
(6) K = ±10%; M = ±20%
Tocomplete the KEMET part numbers, insert the following voltage:
(7) B = 50 volts; C = 100 volts
