CERAMIC HIGH RELIABILITY MOLDED & CHIPS GENERAL INFORMATION MIL-PRF-123 INTRODUCTION 10. Radiographic Inspection (leaded devices only) (100% of lot). MIL-PRF-123 specification covers the general requirements for high reliability, general purpose (BX) and temperature stable (BP) ceramic dielectric fixed capacitors for space, missile, and other high reliability applications. Capacitors covered by MIL-PRF-123 may be used in critical frequency determining applications, timing circuits, and other applications where absolute stability is required (BP) and in applications where appreciable variations in capacitance with respect to temperature, voltage, frequency, and life can be tolerated (BX). 11. Visual Inspection per MIL-PRF-123 criteria. SCREENING TESTS Each lot has the following In-Process Inspections performed: 1. 100% C-SAM (C-Mode Surface Acoustical Microscopy) 2. In-Process Destructive Physical Analysis 3. 100% visual inspection at a minimum of 10X magnification 4. Pre-encapsulation terminal strength evaluation (leaded devices only). Radial leaded capacitors must meet a minimum lead pull of 1.8 kg (4.0 lbs.). The following Group A shall be performed on each lot: 1. Thermal Shock--Performed in accordance to MIL-STD-202, Method 107, Condition A, with step 3 being 125C. Number of cycles shall be 20 (100% of lot). 2. Voltage Conditioning--The voltage conditioning shall consist of applying twice the rated voltage to the units at the maximum rated temperature of 125C for a minimum of 168 hours and a maximum of 264 hours. The voltage conditioning may be terminated at any time during 168 hours to 264 hours time interval that confirmed failures meet the requirements for the PDA during the last 48 hours listed in Table I below (100% of lot). Optional Voltage Conditioning (Accelerated Voltage Conditioning)--AII conditions of the standard voltage conditioning apply with the exception of the increased voltage and the decreased test time. (Refer to Mil-PRF-123 for formula.) *Step 5 is performed on chips at this point (100% of lot). 3. Dielectric Withstanding Voltage 250% of the dc rated voltage at 25C (100% of lot). 4. Insulation Resistance--The 25C measurement with rated voltage applied shall be the lesser of 100 G or 1000 megohmmicrofarads (100% of lot). *5.Insulation Resistance--The 125C measurement with rated voltage applied shall be the lesser of 10 G or 100 megohmmicrofarads (1000% of lot). For chips 125C IR is performed prior to step 3 above. 6. Storage at 150C for 2 hours minimum without voltage applied followed by a 12-hour minimum stabilization period (temperature characteristic BX only). 7. Capacitance must be within specified tolerance at 25C (100% of lot). Cap Exclusion: Capacitance values no more than 5% or .5 pF, whichever is greater, for BX characteristics or 1% or .3 pF, whichever is greater, for BP characteristics beyond specified tolerance limit shall be removed from the lot but shall not be considered defective for determination of the PDA. 8. Dissipation Factor shall not exceed 2.5% for X dielectric, 0.15% for G dielectric at 25C (100% of lot). 9. Percent Defective Allowable (PDA). The following table lists the PDA requirements for MIL-PRF-123 Group A: KEMET STYLE C052Z C062Z C512Z C0805Z C1210Z C1808Z C2225Z C1206Z C1812Z C1825Z MIL STYLE CKS05 CKS06 CKS07 CKS51 CKS52 CKS53 CKS54 CKS55 CKS56 CKS57 TABLE I BURN IN PDA LAST 48 HOURS 1 unit or 0.1% 1 unit or 0.2% 1 unit or 0.2% 1 unit or 0.1% 1 unit or 0.1% 1 unit or 0.1% 1 unit or 0.1% 1 unit or 0.1% 1 unit or 0.1% 1 unit or 0.1% PDA OVERALL 3% 5% 5% 3% 3% 3% 3% 3% 3% 3% 12. Destructive Physical Analysis per EIA-469 and MIL-PRF-123. SAMPLE TESTS The following Group B tests shall be performed on samples from each lot, which have been subjected to and have passed Group A inspection. 1. Thermal Shock--Performed in accordance to MIL-STD-202, Method 107, Condition A, with step 3 being 125C. Number of cycles shall be 100. 2. Life Test per MIL-5TD-202, Method 108. Test temperature and tolerance is +125C +4, -0C. Capacitors shall be subjected to 2X rated voltage for 1000 hours. 3. Humidity, steady state, low voltage per MIL-STD-202, Method 103, Condition A. Capacitors shall be subjected to an environment of 85C with 85% relative humidity for 240 hours minimum. Cycling shall not be performed. A dc potential of 1.3 0.25 volts shall be applied continuously through a 100,000 ohm resistance to each device under test. At completion, 25C IR and Cap are read. 4. Voltage-temperature limits--Capacitance is measured at various temperatures (-55C to +125C) with and without rated voltage. 5. Moisture Resistance per MIL-STD-202, Method 106. There shall be 20 continuous cycles. During the first 10 cycles only, a dc potential of 50 volts shall be applied across the capacitor terminals. Once each day, a check shall be performed to determine whether a capacitor has shorted. Vibration cycle of MILSTD-202, Method 106, Step 7b shall not be performed. Upon completion of MIL-STD-202, Method 106, Step 6 of the final cycle, capacitors shall be measured for capacitance, dielectric withstanding voltage and insulation resistance. The following Group C tests shall be performed on samples selected from lots that have passed Group A and have been submitted for Group B inspection. Samples shall be selected every two months. 1. Terminal Strength 2. Solderability 3. Resistance to Soldering Heat 4. Solvent Resistance (Leaded devices only) All lots shipped must have been subjected to and passed Group A and B testing. STANDARD PACKAGING FOR MIL-PRF-123 IS AS FOLLOWS: C052Z C062Z C512Z tray tray 1 pc. per bag C0805Z C1206Z C1210Z C1808Z C1812Z C1825Z C2225Z chip chip chip chip chip chip chip tray tray tray tray tray tray tray DATA PACKAGE A data package is sent with each shipment which contains: 1. Summary of Group A testing 2. Summary of Group B testing 3. Group B Variables Test Data 4. Lead Pull Data (Leaded Devices Only) 5. Final Destructive Physical Analysis Report 6. Certificate of Compliance stating that the ceramic capacitors supplied meet all the requirements of MIL-PRF-123, the applicable slash sheet(s) and all associated documents. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com 5 CERAMIC CHIP/MIL-PRF-123 CAPACITOR OUTLINE DRAWINGS Military Designation - "S"; KEMET Designation - "H" DIMENSIONS -- INCHES Military Equivalent Styles Chip Size L Length T Thickness Maximum W Width 0805 CKS51 0.080 + 0.035 - 0.015 0.050 + 0.030 - 0.015 0.070 1210 CKS52 0.120 + 0.040 - 0.015 0.100 + 0.030 - 0.015 0.080 1808 CKS53 0.180 + 0.040 - 0.015 0.080 + 0.030 - 0.015 0.080 2225 CKS54 0.220 + 0.040 - 0.015 0.250 + 0.030 - 0.015 0.085 1206 CKS55 0.120 + 0.040 - 0.015 0.060 + 0.030 - 0.015 0.080 1812 CKS56 0.180 + 0.040 - 0.015 0.125 + 0.030 - 0.015 0.095 1825 CKS57 0.180 + 0.040 - 0.015 0.250 + 0.030 - 0.015 0.095 MARKING Capacitors shall be legibly laser marked in contrasting color with the KEMET trademark and 2-digit capacitance symbol. KEMET ORDERING INFORMATION C 0805 Z 101 K 5 G A H Termination Ceramic Chip Size H = Nickel Guarded, Solder-Coated (Solderguard I) L = 70/30 Tin/Lead Plated (4Q2007) 0805, 1206, 1210, 1808, 1812, 1825, 2225 Failure Rate Specification (%/1000 Hours) A - Standard -- Not Applicable Z -- Mil-PRF-123 Temperature Characteristic Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Capacitance Tolerance C-- 0.25pF D-- 0.5 pF F-- 1% J-- 5% K-- 10% KEMET Designator Military Equivalent Temp. Range, C Measured Without DC BiasVoltage G (Ultra Stable) BP -55 to +125 30 ppm C 30 ppm C -55 to +125 15% +15% -25% X (Stable) Working Voltage BX Measured With Bias (Rated Voltage) 5 -- 50; 1 -- 100 M123 A 10 BX B 472 K S Termination Military Specification Number Modification Number S - SnPb 60/40 Z - SnPb 70/30 Tolerance C - 0.25pF; D - 0.5pF; F - 1%; J - 5%; K - 10% Indicates the latest characteristics of the part in the specification sheet. Capacitance Picofarad Code Voltage MIL-PRF-123 Slash Sheet Number Slash Sheet# 10 11 12 13 21 22 23 KEMET MIL-PRF-123 Style Style C0805 CKS51 C1210 CKS52 C1808 CKS53 C2225 CKS54 C1206 CKS55 C1812 CKS56 C1825 CKS57 B - 50; C - 100 Temperature Characteristic TemperatureCharacteristic Capacitance Change with Temperature Measured Without Measured With Bias DC BiasVoltage (Rated Voltage) KEMET Designator Military Equivalent EIA Equivalent Temp. Range, C G (Ultra Stable) BP C0G (NPO) -55 to +125 30 ppm C X (Stable) BX X7R -55 to +125 15% (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com 30 ppm C +15% -25% 9 CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC) RATINGS AND PART NUMBER REFERENCE CAP. pF KEMET PART NUMBER MIL-PRF-123 PART NUMBER 50/100 VOLT- BP-C0805 SIZE (MILITARY CKS51) 1.0 C0805Z109(1)(7)GAH M123A10BP(7)1R0(1)S 1.1 C0805Z119(1)(7)GAH M123A10BP(7)1R1(1)S 1.2 C0805Z129(1)(7)GAH M123A10BP(7)1R2(1)S 1.3 C0805Z139(1)(7)GAH M123A10BP(7)1R3(1)S 1.5 C0805Z159(1)(7)GAH M123A10BP(7)1R5(1)S 1.6 C0805Z169(1)(7)GAH M123A10BP(7)1R6(1)S 1.8 C0805Z189(1)(7)GAH M123A10BP(7)1R8(1)S 2.0 C0805Z209(1)(7)GAH M123A10BP(7)2R0(1)S 2.2 C0805Z229(1)(7)GAH M123A10BP(7)2R2(1)S 2.4 C0805Z249(1)(7)GAH M123A10BP(7)2R4(1)S 2.7 C0805Z279(1)(7)GAH M123A10BP(7)2R7(1)S 3.0 C0805Z309(1)(7)GAH M123A10BP(7)3R0(1)S 3.3 C0805Z339(1)(7)GAH M123A10BP(7)3R3(1)S 3.6 C0805Z369(1)(7)GAH M123A10BP(7)3R6(1)S 3.9 C0805Z399(1)(7)GAH M123A10BP(7)3R9(1)S 4.3 C0805Z439(1)(7)GAH M123A10BP(7)4R3(1)S 4.7 C0805Z479(1)(7)GAH M123A10BP(7)4R7(1)S 5.1 C0805Z519(1)(7)GAH M123A10BP(7)5R1(1)S 5.6 C0805Z569(1)(7)GAH M123A10BP(7)5R6(1)S 6.2 C0805Z629(1)(7)GAH M123A10BP(7)6R2(1)S 6.8 C0805Z689(1)(7)GAH M123A10BP(7)6R8(1)S 7.5 C0805Z759(1)(7)GAH M123A10BP(7)7R5(1)S 8.2 C0805Z829(1)(7)GAH M123A10BP(7)8R2(1)S 9.1 C0805Z919(1)(7)GAH M123A10BP(7)9R1(1)S 10.0 C0805Z100(2)(7)GAH M123A10BP(7)100(2)S 11.0 C0805Z110(2)(7)GAH M123A10BP(7)110(2)S 12.0 C0805Z120(2)(7)GAH M123A10BP(7)120(2)S 13.0 C0805Z130(2)(7)GAH M123A10BP(7)130(2)S 15.0 C0805Z150(2)(7)GAH M123A10BP(7)150(2)S 16.0 C0805Z160(2)(7)GAH M123A10BP(7)160(2)S 18.0 C0805Z180(2)(7)GAH M123A10BP(7)180(2)S 20.0 C0805Z200(2)(7)GAH M123A10BP(7)200(2)S 22.0 C0805Z220(2)(7)GAH M123A10BP(7)220(2)S 24.0 C0805Z240(2)(7)GAH M123A10BP(7)240(2)S 27.0 C0805Z270(3)(7)GAH M123A10BP(7)270(3)S 30.0 C0805Z300(3)(7)GAH M123A10BP(7)300(3)S 33.0 C0805Z330(3)(7)GAH M123A10BP(7)330(3)S 36.0 C0805Z360(3)(7)GAH M123A10BP(7)360(3)S 39.0 C0805Z390(3)(7)GAH M123A10BP(7)390(3)S 43.0 C0805Z430(3)(7)GAH M123A10BP(7)430(3)S 47.0 C0805Z470(3)(7)GAH M123A10BP(7)470(3)S 51.0 C0805Z510(3)(7)GAH M123A10BP(7)510(3)S 56.0 C0805Z560(3)(7)GAH M123A10BP(7)560(3)S 62.0 C0805Z620(3)(7)GAH M123A10BP(7)620(3)S 68.0 C0805Z680(3)(7)GAH M123A10BP(7)680(3)S 75.0 C0805Z750(3)(7)GAH M123A10BP(7)750(3)S 82.0 C0805Z820(3)(7)GAH M123A10BP(7)820(3)S 91.0 C0805Z910(3)(7)GAH M123A10BP(7)910(3)S 100.0 C0805Z101(3)(7)GAH M123A10BP(7)101(3)S 110.0 C0805Z111(3)(7)GAH M123A10BP(7)111(3)S 120.0 C0805Z121(3)(7)GAH M123A10BP(7)121(3)S 130.0 C0805Z131(3)(7)GAH M123A10BP(7)131(3)S 150.0 C0805Z151(3)(7)GAH M123A10BP(7)151(3)S 160.0 C0805Z161(3)(7)GAH M123A10BP(7)161(3)S 180.0 C0805Z181(3)(7)GAH M123A10BP(7)181(3)S 200.0 C0805Z201(3)(7)GAH M123A10BP(7)201(3)S 220.0 C0805Z221(3)(7)GAH M123A10BP(7)221(3)S 240.0 C0805Z241(3)(7)GAH M123A10BP(7)241(3)S 270.0 C0805Z271(3)(7)GAH M123A10BP(7)271(3)S 300.0 C0805Z301(3)(7)GAH M123A10BP(7)301(3)S 330.0 C0805Z331(3)(7)GAH M123A10BP(7)331(3)S 360.0 C0805Z361(3)(7)GAH M123A10BP(7)361(3)S 390.0 C0805Z391(3)(7)GAH M123A10BP(7)391(3)S 430.0 C0805Z431(3)(7)GAH M123A10BP(7)431(3)S 470.0 C0805Z471(3)(7)GAH M123A10BP(7)471(3)S To complete the KEMET part numbers, insert the following tolerances: (1) C = 0.25pF; D = 0.5pF (2) C = 0.25pF; J = 5%; K = 10% (3) F = 1%; J = 5%; K = 10% (4) B = 0.1pF; C = 0.25pF% (5) B = 0.1pF; C = .25pF; D = 0.50pF (6) K = 10%; M = 20% To complete the KEMET part numbers, insert the following voltage: (7) B = 50 volts; C = 100 volts 10 CAP. pF KEMET PART NUMBER MIL-PRF-123 PART NUMBER CAP. pF KEMET PART NUMBER MIL-PRF-123 PART NUMBER 50/100 VOLT-BP-C1808 SIZE (MILITARY CKS53) 300.0 C1808Z301(3)(7)GAH M123A12BP(7)301(3)S 330.0 C1808Z331(3)(7)GAH M123A12BP(7)331(3)S 360.0 C1808Z361(3)(7)GAH M123A12BP(7)361(3)S 390.0 C1808Z391(3)(7)GAH M123A12BP(7)391(3)S 430.0 C1808Z431(3)(7)GAH M123A12BP(7)431(3)S 470.0 C1808Z471(3)(7)GAH M123A12BP(7)471(3)S 510.0 C1808Z511(3)(7)GAH M123A12BP(7)511(3)S 560.0 C1808Z561(3)(7)GAH M123A12BP(7)561(3)S 620.0 C1808Z621(3)(7)GAH M123A12BP(7)621(3)S 680.0 C1808Z681(3)(7)GAH M123A12BP(7)681(3)S 750.0 C1808Z751(3)(7)GAH M123A12BP(7)751(3)S 820.0 C1808Z821(3)(7)GAH M123A12BP(7)821(3)S 910.0 C1808Z911(3)(7)GAH M123A12BP(7)911(3)S 1,000.0 C1808Z102(3)(7)GAH M123A12BP(7)102(3)S 50/100 VOLT-BX-C1808 SIZE (MILITARY CKS53) 5,600.0 C1808Z562K(7)XAH M123A12BX(7)562KS 6,800.0 C1808Z682K(7)XAH M123A12BX(7)682KS 8,200.0 C1808Z822K(7)XAH M123A12BX(7)822KS 10,000.0 C1808Z103K(7)XAH M123A12BX(7)103KS 12,000.0 C1808Z123K(7)XAH M123A12BX(7)123KS 15,000.0 C1808Z153K(7)XAH M123A12BX(7)153KS 18,000.0 C1808Z183K(7)XAH M123A12BX(7)183KS 22,000.0 C1808Z223K(7)XAH M123A12BX(7)223KS 27,000.0 C1808Z273K(7)XAH M123A12BX(7)273KS 33,000.0 C1808Z333K(7)XAH M123A12BX(7)333KS 50 VOLT-BX-C1808 SIZE (MILITARY CKS53) 39,000.0 C1808Z393K5XAH M123A12BXB393KS 47,000.0 C1808Z473K5XAH M123A12BXB473KS 56,000.0 C1808Z563K5XAH M123A12BXB563KS 68,000.0 C1808Z683K5XAH M123A12BXB683KS CAP. KEMET MIL-PRF-123 82,000.0 C1808Z823K5XAH M123A12BXB823KS 300.0 C1210Z301(3)(7)GAH M123A11BP(7)301(3)S pF PART PART NUMBER NUMBER 100,000.0 C1808Z104K5XAH M123A12BXB104KS To complete the part numbers, insert the following tolerances: 330.0 C1210Z331(3)(7)GAH M123A11BP(7)331(3)S 50 VOLT-BP-C2225 SIZE (MILITARY CKS54) 360.0 C1210Z361(3)(7)GAH M123A11BP(7)361(3)S 1,100.0 C2225Z112(3)5GAH M123A13BPB112(3)S 390.0 C1210Z391(3)(7)GAH M123A11BP(7)391(3)S 1,200.0 C2225Z122(3)5GAH M123A13BPB122(3)S (1) 0.25pF; D, 0.5pFM123A11BP(7)431(3)S 430.0 C, C1210Z431(3)(7)GAH 1,300.0 C2225Z132(3)5GAH M123A13BPB132(3)S 470.0 C1210Z471(3)(7)GAH M123A11BP(7)471(3)S (2) C, 0.25pF; J, 5%; K, 10% 1,500.0 C2225Z152(3)5GAH M123A13BPB152(3)S 510.0 C1210Z511(3)(7)GAH M123A11BP(7)511(3)S 1,600.0 C2225Z162(3)5GAH M123A13BPB162(3)S 560.0 F, C1210Z561(3)(7)GAH M123A11BP(7)561(3)S (3) 1%; J, 5%; K, 10% 1,800.0 C2225Z182(3)5GAH M123A13BPB182(3)S 620.0 C1210Z621(3)(7)GAH M123A11BP(7)621(3)S 2,000.0 C2225Z202(3)5GAH M123A13BPB202(3)S 680.0 C1210Z681(3)(7)GAH M123A11BP(7)681(3)S 2,200.0 C2225Z222(3)5GAH M123A13BPB222(3)S 750.0 C1210Z751(3)(7)GAH M123A11BP(7)751(3)S To complete the part numbers, insert the following voltages: 2,400.0 C2225Z242(3)5GAH M123A13BPB242(3)S 820.0 C1210Z821(3)(7)GAH M123A11BP(7)821(3)S 2,700.0 C2225Z272(3)5GAH M123A13BPB272(3)S 910.0 BC1210Z911(3)(7)GAH (7) = 50V; C = 100V M123A11BP(7)911(3)S 3,000.0 C2225Z302(3)5GAH M123A13BPB302(3)S 1,000.0 C1210Z102(3)(7)GAH M123A11BP(7)102(3)S 3,300.0 C2225Z332(3)5GAH M123A13BPB332(3)S 1,100.0 C1210Z112(3)(7)GAH M123A11BP(7)112(3)S 3,600.0 C2225Z362(3)5GAH M123A13BPB362(3)S 1,200.0 C1210Z122(3)(7)GAH M123A11BP(7)122(3)S 3,900.0 C2225Z392(3)5GAH M123A13BPB392(3)S 1,300.0 C1210Z132(3)(7)GAH M123A11BP(7)132(3)S 4,300.0 C2225Z432(3)5GAH M123A13BPB432(3)S 1,500.0 C1210Z152(3)(7)GAH M123A11BP(7)152(3)S 4,700.0 C2225Z472(3)5GAH M123A13BPB472(3)S 1,600.0 C1210Z162(3)(7)GAH M123A11BP(7)162(3)S 5,100.0 C2225Z512(3)5GAH M123A13BPB512(3)S 1,800.0 C1210Z182(3)(7)GAH M123A11BP(7)182(3)S 5,600.0 C2225Z562(3)5GAH M123A13BPB562(3)S 2,000.0 C1210Z202(3)(7)GAH M123A11BP(7)202(3)S 6,200.0 C2225Z622(3)5GAH M123A13BPB622(3)S 2,200.0 C1210Z222(3)(7)GAH M123A11BP(7)222(3)S 6,800.0 C2225Z682(3)5GAH M123A13BPB682(3)S 50 VOLT-BP-C1210 SIZE (MILITARY CKS52) 7,500.0 C2225Z752(3)5GAH M123A13BPB752(3)S 2,400.0 C1210Z242(3)5GAH M123A11BPB242(3)S 8,200.0 C2225Z822(3)5GAH M123A13BPB822(3)S 2,700.0 C1210Z272(3)5GAH M123A11BPB272(3)S 9,100.0 C2225Z912(3)5GAH M123A13BPB912(3)S 3,000.0 C1210Z302(3)5GAH M123A11BPB302(3)S 10,000.0 C2225Z103(3)5GAH M123A13BPB103(3)S 3,300.0 C1210Z332(3)5GAH M123A11BPB332(3)S 50 VOLT-BP-C2225 SIZE (MILITARY CKS54) 50/100 VOLT-BX-C1210 SIZE (MILITARY CKS52) 120,000.0 C2225Z124K5XAH M123A13BXB124KS 5,600.0 C1210Z562(6)(7)XAH M123A11BX(7)562(6)S 150,000.0 C2225Z154K5XAH M123A13BXB154KS 6,800.0 C1210Z682(6)(7)XAH M123A11BX(7)682(6)S 180,000.0 C2225Z184K5XAH M123A13BXB184KS 8,200.0 C1210Z822(6)(7)XAH M123A11BX(7)822(6)S 220,000.0 C2225Z224K5XAH M123A13BXB224KS 10,000.0 C1210Z103(6)(7)XAH M123A11BX(7)103(6)S 270,000.0 C2225Z274K5XAH M123A13BXB274KS 12,000.0 C1210Z123(6)(7)XAH M123A11BX(7)123(6)S 330,000.0 C2225Z334K5XAH M123A13BXB334KS 15,000.0 C1210Z153(6)(7)XAH M123A11BX(7)153(6)S 390,000.0 C2225Z394K5XAH M123A13BXB394KS 18,000.0 C1210Z183(6)(7)XAH M123A11BX(7)183(6)S 470,000.0 C2225Z474K5XAH M123A13BXB474KS 22,000.0 C1210Z223(6)(7)XAH M123A11BX(7)223(6)S 27,000.0 C1210Z273(6)(7)XAH M123A11BX(7)273(6)S 50 VOLT-BX-C1210 SIZE (MILITARY CKS52) 50 VOLT-BP-C0805 SIZE (MILITARY CKS51) 510.0 C0805Z511(3)5GAH M123A10BPB511(3)S 560.0 C0805Z561(3)5GAH M123A10BPB561(3)S 620.0 C0805Z621(3)5GAH M123A10BPB621(3)S 680.0 C0805Z681(3)5GAH M123A10BPB681(3)S 50/100 VOLT-BX-C0805 SIZE (MILITARY CKS51) 330.0 C0805Z331K(7)XAH M123A10BX(7)331KS 390.0 C0805Z391K(7)XAH M123A10BX(7)391KS 470.0 C0805Z471K(7)XAH M123A10BX(7)471KS 560.0 C0805Z561K(7)XAH M123A10BX(7)561KS 680.0 C0805Z681K(7)XAH M123A10BX(7)681KS 820.0 C0805Z821K(7)XAH M123A10BX(7)821KS 1,000.0 C0805Z102K(7)XAH M123A10BX(7)102KS 1,200.0 C0805Z122K(7)XAH M123A10BX(7)122KS 1,500.0 C0805Z152K(7)XAH M123A10BX(7)152KS 1,800.0 C0805Z182K(7)XAH M123A10BX(7)182KS 2,200.0 C0805Z222K(7)XAH M123A10BX(7)222KS 2,700.0 C0805Z272K(7)XAH M123A10BX(7)272KS 3,300.0 C0805Z332K(7)XAH M123A10BX(7)332KS 3,900.0 C0805Z392K(7)XAH M123A10BX(7)392KS 4,700.0 C0805Z472K(7)XAH M123A10BX(7)472KS 50 VOLT-BX-C0805 SIZE (MILITARY CKS51) 5,600.0 C0805Z562K5XAH M123A10BXB562KS 6,800.0 C0805Z682K5XAH M123A10BXB682KS 8,200.0 C0805Z822K5XAH M123A10BXB822KS 10,000.0 C0805Z103K5XAH M123A10BXB103KS 12,000.0 C0805Z123K5XAH M123A10BXB123KS KEMET CAP. MIL-PRF-123 15,000.0 C0805Z153K5XAH M123A10BXB153KS PART NUMBER pF PART NUMBER 18,000.0 C0805Z183K5XAH M123A10BXB183KS 50/100 VOLT-BP-C1210 SIZE (MILITARY CKS52) 33,000.0 39,000.0 47,000.0 56,000.0 68,000.0 82,000.0 100,000.0 C1210Z333(6)5XAH C1210Z393(6)5XAH C1210Z473(6)5XAH C1210Z563(6)5XAH C1210Z683(6)5XAH C1210Z823(6)5XAH C1210Z104(6)5XAH M123A11BXB333(6)S M123A11BXB393(6)S M123A11BXB473(6)S M123A11BXB563(6)S M123A11BXB683(6)S M123A11BXB823(6)S M123A11BXB104(6)S (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com CERAMIC CHIP/MIL-PRF-123 (BP/BX DIELECTRIC) RATINGS AND PART NUMBER REFERENCE CAP. pF KEMET PART NUMBER MIL-PRF-123 PART NUMBER 100 VOLT - BP - C1206 SIZE (MILITARY CKS55) 1.0 C1206Z109(4)1GAH M123A21BPC1R0(4)S 1.1 C1206Z119(4)1GAH M123A21BPC1R1(4)S 1.2 C1206Z129(4)1GAH M123A21BPC1R2(4)S 1.3 C1206Z139(4)1GAH M123A21BPC1R3(4)S 1.5 C1206Z159(4)1GAH M123A21BPC1R5(4)S 1.6 C1206Z169(4)1GAH M123A21BPC1R6(4)S 1.8 C1206Z189(4)1GAH M123A21BPC1R8(4)S 2.0 C1206Z209(4)1GAH M123A21BPC2R0(4)S 2.2 C1206Z229(4)1GAH M123A21BPC2R2(4)S 2.4 C1206Z249(4)1GAH M123A21BPC2R4(4)S 2.7 C1206Z279(5)1GAH M123A21BPC2R7(5)S 3.0 C1206Z309(5)1GAH M123A21BPC3R0(5)S 3.3 C1206Z339(5)1GAH M123A21BPC3R3(5)S 3.6 C1206Z369(5)1GAH M123A21BPC3R6(5)S 3.9 C1206Z399(5)1GAH M123A21BPC3R9(5)S 4.3 C1206Z439(5)1GAH M123A21BPC4R3(5)S 4.7 C1206Z479(5)1GAH M123A21BPC4R7(5)S 5.1 C1206Z519(5)1GAH M123A21BPC5R1(5)S 5.6 C1206Z569(5)1GAH M123A21BPC5R6(5)S 6.2 C1206Z629(5)1GAH M123A21BPC6R2(5)S 6.8 C1206Z689(5)1GAH M123A21BPC6R8(5)S 7.5 C1206Z759(5)1GAH M123A21BPC7R5(5)S 8.2 C1206Z829(5)1GAH M123A21BPC8R2(5)S 9.1 C1206Z919(5)1GAH M123A21BPC9R1(5)S 10.0 C1206Z100(3)1GAH M123A21BPC100(3)S 11.0 C1206Z110(3)1GAH M123A21BPC110(3)S 12.0 C1206Z120(3)1GAH M123A21BPC120(3)S 13.0 C1206Z130(3)1GAH M123A21BPC130(3)S 15.0 C1206Z150(3)1GAH M123A21BPC150(3)S 16.0 C1206Z160(3)1GAH M123A21BPC160(3)S 18.0 C1206Z180(3)1GAH M123A21BPC180(3)S 20.0 C1206Z200(3)1GAH M123A21BPC200(3)S 24.0 C1206Z240(3)1GAH M123A21BPC240(3)S 27.0 C1206Z270(3)1GAH M123A21BPC270(3)S 33.0 C1206Z330(3)1GAH M123A21BPC330(3)S 36.0 C1206Z360(3)1GAH M123A21BPC360(3)S 39.0 C1206Z390(3)1GAH M123A21BPC390(3)S 43.0 C1206Z430(3)1GAH M123A21BPC430(3)S 47.0 C1206Z470(3)1GAH M123A21BPC470(3)S 51.0 C1206Z510(3)1GAH M123A21BPC510(3)S 56.0 C1206Z560(3)1GAH M123A21BPC560(3)S 62.0 C1206Z620(3)1GAH M123A21BPC620(3)S 68.0 C1206Z680(3)1GAH M123A21BPC680(3)S 75.0 C1206Z750(3)1GAH M123A21BPC750(3)S 82.0 C1206Z820(3)1GAH M123A21BPC820(3)S 91.0 C1206Z910(3)1GAH M123A21BPC910(3)S 100.0 C1206Z101(3)1GAH M123A21BPC101(3)S 110.0 C1206Z111(3)1GAH M123A21BPC111(3)S 120.0 C1206Z121(3)1GAH M123A21BPC121(3)S 130.0 C1206Z131(3)1GAH M123A21BPC131(3)S 150.0 C1206Z151(3)1GAH M123A21BPC151(3)S 160.0 C1206Z161(3)1GAH M123A21BPC161(3)S 180.0 C1206Z181(3)1GAH M123A21BPC181(3)S 200.0 C1206Z201(3)1GAH M123A21BPC201(3)S 220.0 C1206Z221(3)1GAH M123A21BPC221(3)S 240.0 C1206Z241(3)1GAH M123A21BPC241(3)S 270.0 C1206Z271(3)1GAH M123A21BPC271(3)S 300.0 C1206Z301(3)1GAH M123A21BPC301(3)S 330.0 C1206Z331(3)1GAH M123A21BPC331(3)S 360.0 C1206Z361(3)1GAH M123A21BPC361(3)S 390.0 C1206Z391(3)1GAH M123A21BPC391(3)S 430.0 C1206Z431(3)1GAH M123A21BPC431(3)S 470.0 C1206Z471(3)1GAH M123A21BPC471(3)S 510.0 C1206Z511(3)1GAH M123A21BPC511(3)S 560.0 C1206Z561(3)1GAH M123A21BPC561(3)S 620.0 C1206Z621(3)1GAH M123A21BPC621(3)S 680.0 C1206Z681(3)1GAH M123A21BPC681(3)S 750.0 C1206Z751(3)1GAH M123A21BPC751(3)S 820.0 C1206Z821(3)1GAH M123A21BPC821(3)S 910.0 C1206Z911(3)1GAH M123A21BPC911(3)S 1000.0 C1206Z102(3)1GAH M123A21BPC102(3)S CAP. pF KEMET PART NUMBER MIL-PRF-123 PART NUMBER 50 VOLT-BP-C1206 SIZE (MILITARY CKS55) 1,100.0 C1206Z112(3)5GAH M123A21BPB112(3)S 1,200.0 C1206Z122(3)5GAH M123A21BPB122(3)S 1,300.0 C1206Z132(3)5GAH M123A21BPB132(3)S 1,500.0 C1206Z152(3)5GAH M123A21BPB152(3)S 1,600.0 C1206Z162(3)5GAH M123A21BPB162(3)S 1,800.0 C1206Z182(3)5GAH M123A21BPB182(3)S 2,000.0 C1206Z202(3)5GAH M123A21BPB202(3)S 2,200.0 C1206Z222(3)5GAH M123A21BPB222(3)S 100 VOLT-BX-C1206 SIZE (MILITARY CKS55) 4,700.0 C1206Z472(6)1XAH M123A21BXC472(6)S 5,600.0 C1206Z562(6)1XAH M123A21BXC562(6)S 6,800.0 C1206Z682(6)1XAH M123A21BXC682(6)S 8,200.0 C1206Z822(6)1XAH M123A21BXC822(6)S 10,000.0 C1206Z103(6)1XAH M123A21BXC103(6)S 12,000.0 C1206Z123(6)1XAH M123A21BXC123(6)S 15,000.0 C1206Z153(6)1XAH M123A21BXC153(6)S 50 VOLT-BX-C1206 SIZE (MILITARY CKS55) 18,000.0 C1206Z183(6)5XAH M123A21BXB183(6)S 22,000.0 C1206Z223(6)5XAH M123A21BXB223(6)S 27,000.0 C1206Z273(6)5XAH M123A21BXB273(6)S CAP. KEMET MIL-PRF-123 33,000.0 C1206Z333(6)5XAH M123A21BXB333(6)S pF PART NUMBER PART NUMBER 39,000.0 C1206Z393(6)5XAH M123A21BXB393(6)S 100 VOLT-BP-C1812 SIZE (MILITARY CKS56) 1,200.0 C1812Z122(3)1GAH M123A22BPC122(3)S 2,200.0 C1812Z222(3)1GAH M123A22BPC222(3)S 2,400.0 C1812Z242(3)1GAH M123A22BPC242(3)S 2,700.0 C1812Z272(3)1GAH M123A22BPC272(3)S 3,000.0 C1812Z302(3)1GAH M123A22BPC302(3)S 3,300.0 C1812Z332(3)1GAH M123A22BPC332(3)S 3,600.0 C1812Z362(3)1GAH M123A22BPC362(3)S 3,900.0 C1812Z392(3)1GAH M123A22BPC392(3)S 4,300.0 C1812Z432(3)1GAH M123A22BPC432(3)S 4,700.0 C1812Z472(3)1GAH M123A22BPC472(3)S 50 VOLT-BP-C1812 SIZE (MILITARY CKS56) 5,100.0 C1812Z512(3)5GAH M123A22BPB512(3)S 5,600.0 C1812Z562(3)5GAH M123A22BPB562(3)S 6,200.0 C1812Z622(3)5GAH M123A22BPB622(3)S 6,800.0 C1812Z682(3)5GAH M123A22BPB682(3)S 7,500.0 C1812Z752(3)5GAH M123A22BPB752(3)S 8,200.0 C1812Z822(3)5GAH M123A22BPB822(3)S 9,100.0 C1812Z912(3)5GAH M123A22BPB912(3)S 10,000.0 C1812Z103(3)5GAH M123A22BPB103(3)S 100 VOLT-BX-C1812 SIZE (MILITARY CKS56) 27,000.0 C1812Z273(6)1XAH M123A22BXC273(6)S 33,000.0 C1812Z333(6)1XAH M123A22BXC333(6)S 39,000.0 C1812Z393(6)1XAH M123A22BXC393(6)S 47,000.0 C1812Z473(6)1XAH M123A22BXC473(6)S 56,000.0 C1812Z563(6)1XAH M123A22BXC563(6)S 50 VOLT-BX-C1812 SIZE (MILITARY CKS56) 100,000.0 C1812Z104(6)5XAH M123A22BXB104(6)S 120,000.0 C1812Z124(6)5XAH M123A22BXB124(6)S 150,000.0 C1812Z154(6)5XAH M123A22BXB154(6)S 180,000.0 C1812Z184(6)5XAH M123A22BXB184(6)S CAP. pF KEMET PART NUMBER MIL-PRF-123 PART NUMBER 100 VOLT-BP-C1825 SIZE (MILITARY CKS57) 3,900.0 C1825Z392(3)1GAH M123A23BPC392(3)S 4,700.0 C1825Z472(3)1GAH M123A23BPC472(3)S 5,100.0 C1825Z512(3)1GAH M123A23BPC512(3)S 5,600.0 C1825Z562(3)1GAH M123A23BPC562(3)S 6,200.0 C1825Z622(3)1GAH M123A23BPC622(3)S 6,800.0 C1825Z682(3)1GAH M123A23BPC682(3)S 7,500.0 C1825Z752(3)1GAH M123A23BPC752(3)S 8,200.0 C1825Z822(3)1GAH M123A23BPC822(3)S 9,100.0 C1825Z912(3)1GAH M123A23BPC912(3)S 10,000.0 C1825Z103(3)1GAH M123A23BPC103(3)S 50 VOLT-BP-C1812 SIZE (MILITARY CKS57) 11,000.0 C1825Z113(3)5GAH M123A23BPB113(3)S 12,000.0 C1825Z123(3)5GAH M123A23BPB123(3)S 13,000.0 C1825Z133(3)5GAH M123A23BPB133(3)S 15,000.0 C1825Z153(3)5GAH M123A23BPB153(3)S 16,000.0 C1825Z163(3)5GAH M123A23BPB163(3)S 18,000.0 C1825Z183(3)5GAH M123A23BPB183(3)S 20,000.0 C1825Z203(3)5GAH M123A23BPB203(3)S 22,000.0 C1825Z223(3)5GAH M123A23BPB223(3)S 100 VOLT-BX-C1825 SIZE (MILITARY CKS57) 56,000.0 C1825Z563(6)1XAH M123A23BXC563(6)S 68,000.0 C1825Z683(6)1XAH M123A23BXC683(6)S 82,000.0 C1825Z823(6)1XAH M123A23BXC823(6)S 100,000.0 C1825Z104(6)1XAH M123A23BXC104(6)S 120,000.0 C1825Z124(6)1XAH M123A23BXC124(6)S 150,000.0 C1825Z154(6)1XAH M123A23BXC154(6)S 50 VOLT-BX-C1825 SIZE (MILITARY CKS57) 180,000.0 C1825Z184(6)5XAH M123A23BXB184(6)S 220,000.0 C1825Z224(6)5XAH M123A23BXB224(6)S 270,000.0 C1825Z274(6)5XAH M123A23BXB274(6)S 330,000.0 C1825Z334(6)5XAH M123A23BXB334(6)S 390,000.0 C1825Z394(6)5XAH M123A23BXB394(6)S 470,000.0 C1825Z474(6)5XAH M123A23BXB474(6)S To complete the KEMET part numbers, insert the following tolerances: To complete the part numbers, insert the following tolerances: (1) C = 0.25pF; D = 0.5pF (2) C = 0.25pF; J = 5%; K = 10% (3) F = 1%; J = 5%; K = 10% (3) J, 5%; K, 10% (4) B = 0.1pF;F, C =1%; 0.25pF% (5) B = 0.1pF; C = .25pF; D = 0.50pF (6) K, 10%; M, 20% (6) K = 10%; M = 20% To complete the KEMET part numbers, insert the following voltage: (7) B = 50 volts; C = 100 volts (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com 11