VESD05A1-02V www.vishay.com Vishay Semiconductors Single ESD-Protection Diode in SOD-523 FEATURES * Compact SOD-523 package * Low package height < 0.7 mm * 1-line ESD-protection 2 1 * AEC-Q101 qualified available 20278 * Working range 0 V to 5 V 19344 * Low leakage current IR < 0.1 A * Surge current 16 A (at 8/20 s) MARKING (example only) * ESD-protection acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge XY Bar = cathode marking X = date code Y = type code (see table below) * e3 - Sn Tin plated exposed side wall of lead frame - Soldering can be checked by standard vision inspection - AOI = Automated Optical Inspection - No X-ray necessary DESIGN SUPPORT TOOLS AVAILABLE * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 20279 3D 3D 3D Models ORDERING INFORMATION ENVIRONMENTAL AND QUALITY CODE PART NUMBER (EXAMPLE) AEC-Q101 QUALIFIED RoHS COMPLIANT + LEAD (Pb)-FREE TERMINATIONS 8K PER 7" REEL (8 mm TAPE) TIN PLATED GREEN ORDERING CODE (EXAMPLE) MOQ = 8K/BOX VESD05A1-02V - G 3 -08 VESD05A1-02V-G3-08 VESD05A1-02V H G 3 -08 VESD05A1-02VHG3-08 PACKAGE DATA PACKAGE NAME VESD05A1-02V SOD-523 TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING F DEVICE NAME 1.4 mg UL 94 V-0 . MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS MSL level 1 Peak temperature max. 260 C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS TEST CONDITIONS SYMBOL Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot IPPM 16 A Peak pulse power Acc. IEC 61000-4-5, 8/20 s/single shot PPP 192 W PARAMETER ESD immunity Operating temperature Storage temperature Rev. 1.5, 04-Jun-2019 Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature VALUE UNIT 30 kV 30 kV TJ -55 to +150 C Tstg -55 to +150 C VESD Document Number: 86129 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VESD05A1-02V www.vishay.com Vishay Semiconductors BiAs-MODE (bidirectional asymmetrical protection mode) With the VESD05A1-02V one signal- or data-lines (L1) can be protected against voltage transients. With pin 1 connected to ground and pin 2 connected to a signal- or data-line which has to be protected. As long as the voltage level on the data- or signal-line is between 0 V (ground level) and the specified maximum reverse working voltage (VRWM) the protection diode between data line and ground offers a high isolation to the ground line. The protection device behaves like an open switch. As soon as any positive transient voltage signal exceeds the break through voltage level of the protection diode, the diode becomes conductive and shorts the transient current to ground. Now the protection device behaves like a closed switch. The clamping voltage (VC) is defined by the breakthrough voltage (VBR) level plus the voltage drop at the series impedance (resistance and inductance) of the protection device. Any negative transient signal will be clamped accordingly. The negative transient current is flowing in the forward direction of the protection diode. The low forward voltage (VF) clamps the negative transient close to the ground level. Due to the different clamping levels in forward and reverse direction the VESD05A1-02V clamping behaviour is bidirectional and asymmetrical (BiAs). 2 L1 1 BiAs 20280 Ground ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER Protection paths Reverse stand off voltage Reverse voltage TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - 1 lines Max. reverse working voltage VRWM - - 5 V at IR = 1 A VR 5 - - V Reverse current at VR = 5 V IR - < 0.1 1 A Reverse breakdown voltage at IR = 1 mA VBR 6 6.8 7.5 V at IPP = 1 A; 8/20 s test pulse VC - 7.2 8.5 V at IPP = IPPM = 16 A; 8/20 s test pulse VC - 10.5 12 V at IPP = 0.2 A; 8/20 s test pulse VF - 0.88 1.1 V Reverse clamping voltage Forward clamping voltage Capacitance Rev. 1.5, 04-Jun-2019 at IPP = 1 A; 8/20 s test pulse VF - 1 1.5 V at IPP = IPPM = 16 A; 8/20 s test pulse VF - 3.2 4.5 V at VR = 0 V; f = 1 MHz CD - 130 150 pF at VR = 2.5 V; f = 1 MHz CD - 76 - pF Document Number: 86129 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VESD05A1-02V www.vishay.com Vishay Semiconductors Axis Title Axis Title 10000 140 10000 120 f = 1 MHz Rise time = 0.7 ns to 1 ns 120 100 53 100 40 1000 1st line 2nd line 60 2nd line CD (pF) 1st line 2nd line 2nd line IESD (%) 100 1000 80 80 60 100 40 27 20 20 0 0 10 -10 0 t (ns) 2nd line 20557 10 0 10 20 30 40 50 60 70 80 90 100 1 2 3 4 5 6 VR (V) 2nd line 23076 Fig. 4 - Typical Capacitance vs. Reverse Voltage Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 / 150 pF) Axis Title 8 10000 100 8 s to 100 % 6 80 1000 5 20 s to 50 % 40 2nd line VR (V) 60 1st line 2nd line 2nd line IPPM (%) Tj = 25 C 7 Tj = 75 C 4 Tj = 150 C 3 100 2 20 1 0 0 1.0E-8 10 0 10 20 30 40 t (s) 2nd line 20548 1.0E-7 1.0E-5 1.0E-4 1.0E-3 Fig. 5 - Typical Reverse Voltage vs. Reverse Current Fig. 2 - 8/20s Peak Pulse Current Wave Form acc. IEC 61000-4-5 Axis Title Axis Title 12 1.0E-6 IR (A) 2nd line 23077 10000 Measured according IEC 61000-4-5 (8/20 s - wave form) 10000 0.9 Tj = 25 C 0.8 10 0.7 1000 2nd line VF (V) 1st line 2nd line 2nd line VC (V) 6 100 4 1000 0.6 Forward 1st line 2nd line Reverse 8 0.5 0.4 Tj = 75 C 0.3 Tj = 150 C 100 0.2 2 0.1 0 0 1.0E-7 10 0 5 23075 10 15 20 25 IPP (A) 2nd line Fig. 3 - Typical Peak Clamping Voltage vs. Peak Pulse Current Rev. 1.5, 04-Jun-2019 23078 1.0E-6 1.0E-5 1.0E-4 1.0E-3 10 1.0E-2 IF (A) 2nd line Fig. 6 - Typical Forward Voltage vs. Forward Current Document Number: 86129 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VESD05A1-02V www.vishay.com Vishay Semiconductors Axis Title 20 10000 Transmission line pulse (TLP): tp = 100 ns 18 16 1000 Reverse 12 1st line 2nd line 2nd line VC-TLP (V) 14 10 8 100 6 Forward 4 2 0 10 0 20 40 60 80 ITLP (A) 2nd line Fig. 7 - Typical Clamping Voltage vs. Peak Pulse Current 0.55 [0.021] 0.75 [0.029] 0.1 [0.004] max. 0.08 [0.003] 0.2 [0.008] PACKAGE DIMENSIONS in millimeters (inches): SOD-523 0.9 [0.035] 0.85 [0.033] min. 0.7 [0.028] 1.7 [0.067] 1.5 [0.059] 1.3 [0.051] 1.1 [0.043] 0.5 [0.020] 0.35 [0.014] 0.18 [0.007] foot print recommendation: 1.45 [0.057] Document no.: S8-V-3880.02-003 (4) Created - Date: 04. April 2017 Rev. 3 - Date: 27. May 2019 0.35 [0.014] 23093 Rev. 1.5, 04-Jun-2019 Document Number: 86129 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VESD05A1-02V www.vishay.com Vishay Semiconductors CARRIER TAPE SOD-523 4 0.1 A-A Section A 1.95 0.1 1.4 0.1 0.5 0.05 O 0.5 0.05 8 3.5 0.05 O 1.5 0.1 1.75 0.1 0.18 0.02 +0.3 -0.1 2 0.05 B-B Section max. 2 0.9 0.1 max. 2 B B 0.73 0.1 A 4 0.1 S8-V-3717.03-005 (4) 05.07.2018 22959 ORIENTATION IN CARRIER TAPE SOD-523 Unreeling direction Cathode SOD-523 S8-V-3717.03-006 (4) 05.07.2018 Top view 22958 Rev. 1.5, 04-Jun-2019 Document Number: 86129 5 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000