The Fujitsu Spread Spectrum Clock Generator Shield parts EMI EMI EMI ASIC CPU, etc. Capacitor BUS EMI ASIC CPU, etc. Less parts = Less cost Ferrite bead, Choke coil SSCG BUS Memory Memory EMI EMI EMI EMI Description Electromagnetic interference (EMI), which is due to electromagnetic radiation emitted from an external source, is an unwanted disturbance in an electrical circuit. In general, EMI is generated when the clock oscillator outputs a high-frequency signal. To reduce EMI, various components need to be added to the board, increasing the time and resources to complete design and measurement. The Fujitsu Spread Spectrum Clock Generator (SSCG) reduces radiated EMI that results from system clock operation. It minimizes the need for other shielding components like bypass capacitors, choke coil and ferrite bead, resulting in system-level cost savings. Applications Industrial/Home Office * FAX * Digital copiers * Scanners * Printers * Projectors Consumer * LCD monitors * HDTVs * PDAs * Mobile phones Networking * Ethernet appliances * LAN switches and hubs * Servers The Fujitsu SSCG Features I/M Analog Modulator Frequency Phase Comparator Reference Clock CP Voltage Accumulator 1/N Outputs the Clock VCO Loop Filter (Capacity) Analog Method I/M Reference Clock 1/N Frequency Phase Comparator V-I Conversion CP IDAC ICO Outputs the Clock Digital Control Digital Method * Digital frequency modulation technique -Digital control using a current D/A converter achieves accurate frequency modulation compared to conventional analog control, which causes distortion and blunting in the modulated waveform * Selectable modulation rate -No modulation, 0.5%, 1.0%, 2.0%, -1.0%, -2.0%, -4.0% * Programmable product (built-in FRAM) -Set and save output frequency and modulation parameters by changing the multiplication / division clock rate * Low current consumption -5.5mA @ 25MHz * Power supply voltage range -1.65 V to 3.6 V * Single input and multiple outputs (Max. 8 Clock outputs, Example: MB88181) -One device supports multiple clocks, thus reducing the need for other components such as oscillators * Pin compatibility with other products in the market * Enhanced input frequency range -8.3MHz to 134MHz * Package options -SOP8, TSSOP8, BCC6, BCC18, BCC20 The Fujitsu SSCG Solution Conventional Reduces BOM cost and PCB area XTAL 27.12MHz RF 3V TCXO 19.2MHz LCD Video/image Control LCDC 3V DSP 3V System LSI 3V Buffer 48MHz Level Shifter Audio 3V CLK O/P1 37MHz XTAL 37MHz USB 1.8V CLK O/P2 27.12MHz RF 3V SSCG TCXO 19.2MHz LCD Video/image Control LCDC 3V DSP 3V System LSI 3V CLK O/P3 19.2MHz CLK O/P4 48MHz USB 1.8V Audio 3V The Fujitsu SSCG Parts Ordering Information MB88151A MB88152A MB88153A MB88154A MB88155 MB88161 PNF PNF PNF PNF PFT PVB Grade (*1) G G G G G PVB G MB88181A PFT G 1A 1B 2A 2B MB88R157 (FRAM) Freq type 100 101 200 201 400 401 500 501 800 801 101 111 100 110 102 112 100 101 110 111 103 113 102 112 101 111 100 110 102 112 101 111 103 113 400 402 410 412 Packing and Option(*2) XXX G max. 2 JN/ JNEF/ JNER 16.6 E1 1/2 8 JN/ JNEF/ JNER JN/ JNEF/ JNER JN/ JNEF/ JNER Demodulation rate(%) Output frequency (MHz) Min. Output frequency range 40 80120 160 16.6 33.4 33.2 66.8 66.4 134 8.3 16.7 16.7 66.4 134 67 16.6 67 134 16.6 134 40 134 40 134 16.6 134 16.6 134 8.3 16.6 E1 1 E1 1 16.6 40 16.6 40 33 67 33 67 50 80 50 80 12.5 25 12.5 25 25 50 25 50 4 12.5 20 50 80 1 2 1 4 20 14 12 20 28 40 28 42 20 28 12 80 28 80 28 168 16 32 8 19.2 50 1 1 JN BND (*3)/ ER/ EF under development No. of pins/Type Min. Max. 1.5 3.0 8 SOP 3.0 3.6 1.5 1.5 1.5 3.0 3.0 3.0 -1.0 -3.0 8 SOP 3.0 3.6 8 SOP 3.0 3.6 8 SOP 3.0 3.6 8 TSSOP 3.0 3.6 2.7 3.6 *5 2.7 3.0 3.6 3.6 *5 E1 E1 E1 E1 E1 Option- E1 Option19.2 al Optional 10 P/S(V) PKG Down Max. Center 33.4 4 al PVA1 Min. 1 EF/ ER EF/ ER G MB88162 MB88182 *1 *2 *3 *4 *5 *6 *7 *8 *9 Pakage Suffix Input frequency (MHz) Remarks Product No. Multiplication ratio ORDERING No. EX: MB881XXPNF-G-100-JNE1 0.5 1.5 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 3.0 3.0 3.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 4.0 18 BCC 18 BCC *4 2.0 4.0 166 2.0 20 TSSOP 3.0 3.6 *7 8 100 2.0 20 BCC 1.65 2.7 *8 1 134 1.75 8 SOP 3.0 3.6 *9 G: General Purpose use JN: tray or tube packing , JNEF/EF: Emboss taping(EF type), JNER/ER: Emboss taping(ER type), E1: Lead free No suffix : tray or tube packing Use for external clock input Small package (2.7mmx2.4mm) with clock output stop function Small package (2.4mmx1.4mm) Multiplication ratio and output frequency are the MASK option.CLK output has eight pins. The output pin state during power-down is fixed by mask option.L outputsHi-Z Input frequency, output frequency, modulation rate, oscillation stabilization, capacitance can be set. The output pin state during power-down is fixed by mask option (L outputs,Hi-Z Input frequency, output frequency, modulation rate, oscillation stabilization capacitance can be set on FRAM without restraint. Modulation clock output pin situation is resistor settingL outputs,Hi-Zwhen in OE pin setting The Fujitsu SSCG Evaluation Board Ordering Information Series MB88151A MB88152A MB88153A MB88154A Evaluation Board Number Evaluate Device Product No. Series MB88155 Evaluation Board Number Evaluate Device Product No. MB88151AEB01-100 MB88151A-100 MB88155EB01-100 MB88155-100 MB88151AEB01-101 MB88151A-101 MB88155EB01-101 MB88155-101 MB88151AEB01-200 MB88151A-200 MB88155EB01-102 MB88155-102 MB88151AEB01-201 MB88151A-201 MB88155EB01-103 MB88155-103 MB88151AEB01-400 MB88151A-400 MB88155EB01-110 MB88155-110 MB88151AEB01-401 MB88151A-401 MB88155EB01-111 MB88155-111 MB88151AEB01-500 MB88151A-500 MB88155EB01-112 MB88155-112 MB88151AEB01-501 MB88151A-501 MB88155EB01-113 MB88155-113 MB88151AEB01-800 MB88151A-800 MB88155EB01-400 MB88155-400 MB88151AEB01-801 MB88151A-801 MB88155EB01-402 MB88155-402 MB88152AEB01-100 MB88152A-100 MB88155EB01-410 MB88155-410 MB88152AEB01-110 MB88152A-110 MB88155EB01-412 MB88155-412 MB88152AEB01-101 MB88152A-101 MB88161 MB88161EB01 MB88161 MB88152AEB01-111 MB88152A-111 MB88162 MB88162EB01 MB88162 MB88152AEB01-102 MB88152A-102 MB88182 MB881821A MB88152AEB01-112 MB88152A-112 MB88182EB01-1A (under development) MB88182EB01-2A (under development) MB881822A MB88182EB01-1B (under development) MB881821B MB88182EB01-2B (under development) MB881822B MB88R157EB01 (under development) MB88R157 MB88153AEB01-100 MB88153A-100 MB88153AEB01-101 MB88153A-101 MB88153AEB01-110 MB88153A-110 MB88153AEB01-111 MB88153A-111 MB88154AEB01-101 MB88154A-101 MB88154AEB01-102 MB88154A-102 MB88154AEB01-103 MB88154A-103 MB88154AEB01-111 MB88154A-111 MB88154AEB01-112 MB88154A-112 MB88154AEB01-113 MB88154A-113 MB88R157 Evaluation Board Evaluation Board (MB88182EB01) All listed boards have similar features FUJITSU MICROELECTRONICS AMERICA, INC. Corporate Headquarters 1250 E. Arques Avenue, M/S 333, Sunnyvale, CA 94085-5401 Tel: (800) 866-8608 Fax: (408) 737-5999 E-mail: inquiry@fma.fujitsu.com Web Site: http://us.fujitsu.com/micro 8 (c) 2010 Fujitsu Microelectronics America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Printed in the U.S.A. SSCG-FS-21367-04/201_v2