Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 1 of 13 North America only
FEATURES:
Models
Single output
Model
Output
Voltage
Range
(V)
Output
Current
(A)
Input
Voltage
(VAC/Hz)
Input
Voltage
(VDC)
Mode of
Operation
OCP /
OVP
Efficiency
(%)
AMEPR60-50120AZ
36-50
0 - 1.20
90-305 /
47-440
130-430
Constant Current
1.27
89
Constant Voltage
50.7
86
AMEPR60-36170AZ
24-36
0 - 1.70
90-305 /
47-440
130-430
Constant Current
1.77
88
Constant Voltage
36.6
86
AMEPR60-24250AZ
12-24
0 - 2.50
90-305 /
47-440
130-430
Constant Current
2.55
87
Constant Voltage
24.5
85
AMEPR60-12500AZ
5-12
0 - 5.0
90-305 /
47-440
130-430
Constant Current
5.2
85
Constant Voltage
12.3
82
Exceeding the maximum output power will permanently damage the converter
The dimming feature is not supported when units are used in Constant Voltage mode only.
In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown.
All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add “–NA” to part number
when ordering.
Note: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C,
humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See
http://www.aimtec.com/terms-sale
AMEPR60-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with
the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are prone
to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or cause
early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge
suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations
prior to installation may damage sensitive equipment permanently.
Input Specifications
Parameters
Conditions
Typical
Maximum
Units
Inrush current <2ms
115VAC
30
A
230VAC
50
Leakage current
115VAC
0.5
mA
230VAC
0.7
AC current
115VAC
0.73
A
230VAC
0.33
Power Factor
115VAC
0.97
230VAC
0.93
External fuse
250V/1.5A
Start up time
250
ms
Surge voltage
2sec
440
V
AC-DC Constant Current or Constant
Voltage LED Driver
Over Temperature Protection
Over Current Protection
Input range 90-305VAC/47-440Hz
Waterproof Case rated IP68
High Efficiency up to 89%
Operating temperature -40 to 85°C
Dimmable via resistive / 0-10Vdc / PWM
5 Years Limited Warranty
Power Factor Correction
Short Circuit Protection
Click on Series name for product info on aimtec.com
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 2 of 13 North America only
Output Specifications
Parameters
Conditions
Typical
Maximum
Units
Current accuracy (CC Mode)
±3
%
Voltage accuracy (CV Mode)
±3
%
Line regulation
LL-HL
±1
%
Load regulation
0-100% load
±3
%
Ripple & Noise
20MHz Bandwidth
75
mV p-p
Hold-up time
90
ms
Current adjustment range
100-10
%
Minimum Load Voltage
See the models table
Tested with 0.1µF (C/C) or (M/C) and 47µF (E/C) parallel capacitors at the end.
Note: from 0% to 10% dimming adjustment signal instability may be present.
Isolation Specifications
Parameters
Conditions
Typical
Rated
Units
Tested I/O voltage
3 sec/3.5mA
3000
VAC
Isolation Resistance
500VDC
>1000
Isolation Capacitance
1000
pF
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
130
KHz
Over current protection
AMEPR60-50120AZ
1.27
A
AMEPR60-36170AZ
1.77
AMEPR60-24250AZ
2.55
AMEPR60-12500AZ
5.2
Over voltage protection
Refer to Constant Current vs. Constant Voltage Mode curve
Short circuit protection
Continuous
Short circuit restart
Auto recovery
Over temperature protection
>105°C
Operating temperature
With derating over 55°C
-40 to +85
oC
Maximum case temperature
100
oC
Storage temperature
-40 to +95
oC
Temperature coefficient
±0.02
% / oC
Cooling
Free air convection
Humidity
95
% RH
Case material
Plastic
Potting
Epoxy (IP67 rated)
Wires
UL1015 18AWG *20CM
Weight
530
g
Dimensions (L X W X H)
5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40.50 mm
MTBF
>400,000 hrs (MIL-HDBK-217F at +25°C)
Safety Specifications
Parameters
Agency approvals
CE
Standards
Designed to meet UL8750, IEC/EN60950-1 standards,
EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13
Information Technology Equipment
EN55022 Class B
Harmonic Current Emissions
IEC/EN 61000-3-2, Class C
Voltage fluctuations and flicker
IEC/EN 61000-3-3, (EN60555-3)
Electrostatic Discharge Immunity
IEC 61000-4-2 Level 3
RF, Electromagnetic Field Immunity
IEC 61000-4-3 Level 2
Electrical Fast Transient / Burst Immunity
IEC 61000-4-4 Level 2
Surge Immunity
IEC 61000-4-5 Level 3
RF, Conducted Disturbance Immunity
IEC 61000-4-6 Level 2
Power frequency Magnetic Field Immunity
IEC 61000-4-8 Level 1
Voltage dips, Short Interruptions Immunity
IEC 61000-4-11
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 3 of 13 North America only
Dimensions
57.68
(2.27)
134.80
(5.30)
40.50
(1.59)
158.50
(6.24)
200.00
(8.00)
200.00
(8.00)
2.30
(0.09)
40.50
(1.59)
57.68
(2.27)
16.75
(0.66)
End View
Top View
Side View
32.00
(1.26)
Input/Output Wires are 18 AWG 20cm
Wire connection:
AMEPR60-AZ Analog (resistive) Dimming Application Circuit
AMEPR60-AZ
N
1st LED
+Vout
1
1
-Vout
RED
BLACK
AC
BLUE
L
BROWN
GREEN
BLUE
WHITE Pot
Wire
Connection
Brown
AC L
Blue
AC N
Green
Ground
Red
+V output
Black
-V Output
Blue (Dimming)
+ Vs dimming
White (Dimming)
-Vs dimming
Model Number
Maximum Pot
Value (kΩ)
AMEPR60-50120AZ
26.00
AMEPR60-36170AZ
16.95
AMEPR60-24250AZ
26.10
AMEPR60-12500AZ
34.10
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 4 of 13 North America only
AMEPR60-AZ Analog (0-10V) Dimming Application Circuit
AMEPR60-AZ PWM (1KHz) Dimming Application Circuit
Temperature Graph
-40 -20 0 20 40 60 80 100
100
80
60
40
20
0
Free Air Convection
55 º C
Safe Operating Area
Ambient Temperature º C
85
Output Power %
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 5 of 13 North America only
Efficiency Vs. Input Voltage & Output Current (Constant Current Mode)
AMEPR60-50120AZ
AMEPR60-36170AZ
115Vac, 0.24,
82.323 115Vac, 1.2,
86.6
230Vac, 0.24,
74.12
230Vac, 1.2,
87.77
277Vac, 0.24,
74.59
277Vac, 1.2,
87.64
(%)
(A)
Efficiency VS. Input Voltage & Output Current
115Vac
230Vac
277Vac
110Vac, 0.34,
83.02 110Vac, 1.7,
85.53
230Vac, 0.34,
76.26
86.82
76.28
277Vac, 1.7,
86.8
(%)
(A)
Efficiency VS. Input Voltage & Output Current
110Vac
230Vac
277Vac
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 6 of 13 North America only
AMEPR60-24250AZ
AMEPR60-12500AZ
115Vac, 0.5,
82.77
115Vac, 2.5,
84.79
230Vac, 0.5,
74.19
230Vac, 2.5,
85.49
277Vac, 0.5,
74.2
277Vac, 2.5,
85.3
(%)
(A)
Efficiency VS. Input Voltage & Output Current
115Vac
230Vac
277Vac
110Vac, 1,
82.6 110Vac, 5,
83.43
230Vac, 1,
74.9
230Vac, 5, 84
277Vac, 1,
74.9
277Vac, 5,
83.9
(%)
(A)
Efficiency VS. Input Voltage & Output Current
110Vac
230Vac
277Vac
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 7 of 13 North America only
PFC Value vs. Output Load Current (Constant Current Mode)
AMEPR60-50120AZ
AMEPR60-36170AZ
115VAC, 0.6,
0.996
115VAC, 1.2,
1
230VAC, 0.6,
0.957
230VAC, 1.2,
0.988
277VAC, 0.6,
0.893
277VAC, 1.2,
0.962
290VAC, 0.6,
0.822 290VAC, 1.2,
0.803
0.46 0.48
(A)
(PF) PF VS. Output Current
115VAC
230VAC
277VAC
290VAC
305VAC
115VAC, 0.85,
0.996 115VAC, 1.7,
1
230VAC, 0.85,
0.965 230VAC, 1.7,
0.989
277VAC, 0.85,
0.914
277VAC, 1.7,
0.974
290VAC, 0.85,
0.847
290VAC, 1.7,
0.87
0.46 0.48
(A)
(PF) PF VS. Output Current
115VAC
230VAC
277VAC
290VAC
305VAC
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 8 of 13 North America only
AMEPR60-24250AZ
AMEPR60-12500AZ
115VAC, 1.25,
1
115VAC, 2.5,
1
230VAC, 1.25,
0.965
230VAC, 2.5,
0.989
277VAC, 1.25,
0.921
277VAC, 2.5,
0.977
290VAC, 1.25,
0.899
290VAC, 2.5,
0.907
0.46 0.48
(A)
(PF) PF VS. Output Current
115VAC
230VAC
277VAC
290VAC
305VAC
115VAC, 2.5,
0.997
115VAC, 5,
0.997
230VAC, 2.5,
0.961
230VAC, 5,
0.991
277VAC, 2.5,
0.906
277VAC, 5,
0.971
290VAC, 2.5,
0.871
290VAC, 5,
0.893
0.46 0.48
(A)
(PF) PF VS. Output Current
115VA
C
230VA
C
277VA
C
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 9 of 13 North America only
PFC Value vs. Output Power
AMEPR60-50120AZ
AMEPR60-24250AZ
0.999
0.999
0.991
0.979
0.971
0.901
0.777
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
90Vac
115Vac
230Vac
264Vac
277Vac
290Vac
305Vac
0.991
0.986
0.984
0.978
0.932
0.802
0.505
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
90Vac
115Vac
230Vac
264Vac
277Vac
290Vac
305Vac
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 10 of 13 North America only
Constant Current vs. Constant Voltage Mode
AMEPR60-50120AZ
AMEPR60-36170AZ
115 & 230
Vac, 36, 1.2
115 & 230
Vac, 50, 1.2
115 & 230
Vac, 50.4, 0
115 & 230
Vac, 52, 0
(V)
(A) Constant Currnet Vs Constant Voltage
36
38
40
115 & 230
Vac, 24, 1.7
115 & 230
Vac, 36, 1.7
115 & 230
Vac, 36.7, 0
115 & 230
Vac, 38, 0
(V)
(A) Constant Currnet Vs Constant Voltage
24
26
28
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 11 of 13 North America only
AMEPR60-24250AZ
AMEPR60-12500AZ
115 & 230
Vac, 12, 2.5
115 & 230
Vac, 24, 2.5
115 & 230
Vac, 24.7, 0
115 & 230
Vac, 26, 0
(V)
(A) Constant Currnet Vs Constant Voltage
12
14
16
115 & 230
Vac, 5, 5
115 & 230
Vac, 12, 5
115 & 230
Vac, 12.6, 0
115 & 230
Vac, 14, 0
(V)
(A) Constant Current Vs Constant Voltage
5
6
7
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 12 of 13 North America only
Dimming Control (Output Current vs. Radj)
AMEPR60-50120AZ
AMEPR60-36170AZ
115 & 230
Vac, 0, 0
115 & 230
Vac, 0.093,
0.12
115 & 230
Vac, 0.191,
0.24
115 & 230
Vac, 0.32,
0.36
115 & 230
Vac, 0.482,
0.48
115 & 230
Vac, 0.708,
0.6
115 & 230
Vac, 1.015,
0.72
115 & 230
Vac, 1.414,
0.84
115 & 230
Vac, 2.333,
0.96
115 & 230
Vac, 4.037,
1.08
115 & 230
Vac, 10.69,
1.2
(KΩ)
(A) Output Current VS.Dimming-Resistance
0
0.093
115 & 230
Vac, 0, 0
115 & 230
Vac, 0.079,
0.17
115 & 230
Vac, 0.202,
0.34
115 & 230
Vac, 0.354,
0.51
115 & 230
Vac, 0.554,
0.68
115 & 230
Vac, 0.83,
0.85
115 & 230
Vac, 1.25,
1.02
115 & 230
Vac, 1.93,
1.19
115 & 230
Vac, 3.16,
1.36
115 & 230
Vac, 6.35,
1.53
115 & 230
Vac, 36.53,
1.7
(KΩ)
(A) Output Current VS. Dimming-Resistance
0
0.079
Series AMEPR60-AZ
up to 5A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.AF 13 of 13 North America only
AMEPR60-24250AZ
AMEPR60-12500AZ
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
115 & 230
Vac, 0, 0
115 & 230
Vac, 0.204,
0.25
115 & 230
Vac, 0.411,
0.5
115 & 230
Vac, 0.666,
0.75
115 & 230
Vac, 0.93, 1
115 & 230
Vac, 1.42,
1.25
115 & 230
Vac, 2.096,
1.5
115 & 230
Vac, 3.11,
1.75
115 & 230
Vac, 5.07, 2
115 & 230
Vac, 10.3,
2.25
115 & 230
Vac, 52, 2.5
(KΩ)
(A) Output Current VS. Dimming Resistance
0
0.204
115 & 230
Vac, 0, 0
115 & 230
Vac, 0.43, 0.5
115 & 230
Vac, 1, 1
115 & 230
Vac, 1.6, 1.5
115 & 230
Vac, 2.1, 2
115 & 230
Vac, 3.1, 2.5
115 & 230
Vac, 4.6, 3
115 & 230
Vac, 6.4, 3.5
115 & 230
Vac, 10.8, 4
115 & 230
Vac, 20.2, 4.5
115 & 230
Vac, 50, 5
(KΩ)
(A) Output Current vs. Dimming-Resistance
0
0.43