SMP1330-005 - Skyworks Solutions, Inc.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200050I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 5, 2013 1

DATA SHEET

SMP1330 Series: Plastic Packaged Limiter Diodes

Applications

 WLAN, WiMAX

 Cellular infrastructure

 RFID readers

 Test instruments

Features

 Low-distortion design

 Limiter performance to 4 GHz and higher

 Low insertion loss

 Low-cost plastic package

 Packages rated MSL1 @ 260 C per JEDEC J-STD-020

Skyworks Green™ products are compliant with

all applicable legislation and are halogen-free.

For additional information, refer to Skyworks

Deﬁnition of Green™, document number

SQ04-0074.

Description

The SMP1330 series of limiter diodes is designed for use as

passive receiver protectors in wireless and other RF systems

covering frequencies up to 4 GHz and higher. These diodes use

Skyworks limiter diode technology to produce gold-doped, thin

base limiters for low-loss, low-distortion performance and good

limiter action.

The SMP1330 series of diodes has been characterized in limiter

circuits and tightly specified to ensure consistent performance.

The absolute maximum ratings of the SMP1330 series are

provided in Table 1.

Table 1. SMP1330 Series Absolute Maximum Ratings

Parameter Symbol Minimum Maximum Units

Reverse voltage VR 20 V

Forward current IF 100 mA

CW incident power @ 25 °C lead temperature 1 W

Peak incident power @ 1% duty factor, 1 μs pulse 100 W

Power dissipation @ 25 °C lead temperature PD 250 mW

Storage temperature TSTG –65 +150 C

Operating temperature TA –65 +150 C

Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value.

CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device

must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body

or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.

DATA SHEET • SMP1330 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

2 November 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200050I

Configurations

The SMP1330 series of diodes are available in SOT-23 and SOD-

882 packages. As illustrated in Figure 1, the industry standard

SOT-23 package has two wiring configurations:

Figure 1. SMP1330 Series SOT-23 Configurations

Electrical and Mechanical Specifications

The part numbers and configurations for the SMP1330 series are

provided in Table 2. Electrical specifications are provided in

Table 3. Typical 1 GHz limiter performance measurements are

provided in Table 4.

Input power versus output power performance for the SMP1330

series is illustrated in Figure 2. Package dimensions are shown in

Figures 3 (SOT-23) and 5 (SOD-882). Tape and reel dimensions

are provided in Figures 4 (SOT-23) and 6 (SOD-882).

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SMP1330 series is rated to Moisture Sensitivity Level 1

(MSL1) at 260 C. These diodes can be used for lead or lead-free

soldering. For additional information, refer to the Skyworks

Application Note, Solder Reflow Information, document number

200164.

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format.

Table 2. Part Number and Configuration

Series Pair Low Inductance Single

SOT-23 SOT-23 SOD-882

SMP1330-005

Marking: PQ2

SMP1330-005LF

Green™

Marking: RQ2

SMP1330-007LF

Green™

Marking: RQB

SMP1330-040LF

Green™

Marking: F

LS = 1.5 nH LS = 0.4 nH LS = 0.45 nH

The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended

for new designs.

DATA SHEET • SMP1330 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200050I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 5, 2013 3

Table 3. SMP1330 Series Electrical Specifications

(TA = +25 C Unless Otherwise Noted)

Parameter Symbol Test Condition Min Typical Max Units

Series resistance RS F = 100 MHz, IF = 10 mA 1.2 1.5 Ω

Capacitance CT 0 V

F = 1 MHz

F = 1 GHz

0.7

1.0

Capacitance ratio CTR CT @ 0 V/CT @ 6 V 1.22 –

Conductance G 0 V, F = 1 GHz 50 μs

Carrier lifetime TI IF = 10 mA 4 ns

I region width 2 μm

Breakdown voltage VB IR = 10 μA 20 35 50 V

Note 1: Performance is guaranteed only under the conditions listed in this Table.

Table 4. Typical 1 GHz Limiter Performance

Parameter SMP1330-005 Condition

Connection Parallel

Insertion loss 0.3 dB Input power = –20 dBm

IP3 +30 dBm Input power = < 0 dBm

1 dB compression +10 dBm

Attenuation @ +20 dBm 8.8 dB

Attenuation @ +30 dBm 14 dB

Input Power (dBm)

Output Power (dBm)

+25

+20

+15

+10

00 +10 +14 +18 +22 +26 +30

005

007

Figure 2. Typical 1 GHz Limiter Performance

DATA SHEET • SMP1330 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

4 November 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200050I

0.035 (0.89 mm) Min.

0.044 (1.12 mm) Max.

0.0005 (0.01 mm) Min.

0.004 (0.10 mm) Max.

0.012 (0.30 mm) Min.

0.020 (0.50 mm) Max.

0.003 (0.080 mm) Min.

0.008 (0.20 mm) Max.

8° Max.

0.022 (0.55 mm) Ref.

0.110 (2.80 mm) Min.

0.120 (3.04 mm) Max.

0.083 (2.10 mm) Min.

0.104 (2.64 mm) Max.

0.037 (0.95 mm) Ref.

0.047 (1.20 mm) Min.

0.055 (1.40 mm) Max.

0.076 (1.92 mm) Ref.

0.020 (0.51 mm) Ref.

S1389

Figure 3. SOT-23 Package Dimension Drawing

Notes:

1. Carrier tape: black conductive polycarbonate.

2. Cover tape material: transparent conductive PSA.

3. Cover tape size: 5.40 mm width.

4. Tolerance ±0.10 mm.

5. Ten sprocket hole pitch cumulative tolerance: ±0.2 mm.

6. All measurements are in millimeters.

3.10 (Ao)

1.0

2.2

2.70 (Bo)

8.00 + 0.3/–0.1

4.00

(See Note 5)

2.00 ± 0.05

3.50 ± 0.05

1.75 ± 0.10

0.25 ± 0.05

0.8 ± 0.05

1.20 (Ko)

Ø1.00 Min.

R 0.5 Typ. Pin 1 Indicator

Ø1.5 + 0.1/–0

S1684b

R 0.3 Max

Figure 4. SOT-23 Tape and Reel Dimensions

DATA SHEET • SMP1330 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200050I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 5, 2013 5

All dimensions in millimeters

0.650

Cathode

Indicator

Cathode

Terminal

1.000

Bottom View

Side View

Top View

2X 0.25 ± 0.05

2X 0.50 ± 0.05

0.46 +0.04/–0.06

0.05/0.00

0.600

0.325

S1892

Figure 5. SOD-882 Package Dimension Drawing

S1922

2.00 ± 0.05 ∅1.55 ± 0.05 (D0)

∅0.40 ± 0.05 (D1)

Cathode

Indicator

0.20

1.15 ± 0.05 (Bo)

0.70 ± 0.05 (A0)

4.00 ± 0.10

BB A

2.00 ± 0.05

0.47 ± 0.05 (Ko)

1.75 ± 0.10

3.50 ± 0.05

8.00 ± 0.1

Notes:

1. Carrier tape: black conductive polycarbonate.

2. Cover tape: transparent conductive material.

3. Cover tape size: 5.4 mm width.

4. ESD surface resistivity is ≥1 x 10

~ ≤ 1 x 10

Ohms/square.

5. All dimensions are in millimeters.

Figure 6. SOD-882 Tape and Reel Dimensions

DATA SHEET • SMP1330 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

6 November 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200050I

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions

of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands

and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,

are incorporated by reference.