VO2223B www.vishay.com Vishay Semiconductors Optocoupler, Power Phototriac FEATURES * Fully integrated power TRIAC 8 1 * Maximum trigger current (IFT): 10 mA 2 i179012-3 * Isolation test voltage 5300 VRMS 3 6 4 5 * Peak off-state voltage 600 V * Load current 1 ARMS * dV/dt of 600 V/s 21081-4 * DIP-8 package V D E * Pure tin leads * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The VO2223B is an optically coupled phototriac driving an integrated power TRIAC in a DIP-8 package. Featuring galvanic and electrical noise isolation, the VO2223B is able to directly drive medium AC loads with a low voltage input signal. The high blocking voltage of 600 V permits control of off-line voltages up to 230 VAC and is sufficient for as much as 380 VAC. APPLICATIONS * Air conditioners * Microwave ovens * Washing machines * Refrigerators * Fan heaters * Inductive heating cooker * Water heaters * Industrial equipments AGENCY APPROVALS * UL * cUL * DIN EN 60747-5-5 (VDE 0884-5), available with option 1 ORDERING INFORMATION V O 2 2 PART NUMBER AGENCY CERTIFIED/PACKAGE UL, cUL DIP-8 SMD-8, option 7 VDE, UL, cUL 2 3 B - X 0 0 # PACKAGE OPTION DIP-8 7.62 mm Option 7 > 0.7 mm TRIGGER, CURRENT IFT (mA) 10 VO2223B VO2223B-X007T 10 DIP-8 VO2223B-X001 SMD-8, option 7 VO2223B-X017T Document Number: 83312 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 VO2223B www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Forward current IF 50 mA Reverse voltage VR 5 V Pdiss 70 mW INPUT Input power dissipation OUTPUT Repetitive peak off-state voltage Sine wave, 50 Hz to 60 Hz, gate open RMS on-state current Non repetitive surge peak on-state current VDRM 600 V IT(RMS) 1 A ITSM 10 A 50 Hz, peak COUPLER Total power dissipation (1) Pdiss 1.2 W Ambient temperature range Tamb -40 to +85 C Tstg -40 to +125 C Tsld 260 C Storage temperature range t 10 s max. Soldering temperature Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Total power dissipation value is based on 2S2P PCB 80 IT(RMS) - RMS On-State Current (A) Pdiss - Input Power Disspation (mW) ABSOLUTE MAXIMUM RATING CURVES 60 40 20 0 -40 21296 -20 0 20 40 60 1.2 1.0 0.8 0.6 0.4 0.2 80 100 120 Tamb - Ambient Temperature (C) Fig. 1 - Input Power Dissipation vs. Ambient Temperature 21354 0 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 2 - RMS On-State Current vs. Ambient Temperature Note * The RMS on-state current was calculated out under a given operating conditions and only for reference: input power: QE = 0.015 W, BA (4-layer) = 30 C/W Document Number: 83312 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 VO2223B www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Trigger input current VT = 6 V IFT 2.5 Input reverse current VR = 5 V IR - - 10 mA - 10 IF = 10 mA VF 0.9 - A 1.4 V INPUT Forward voltage OUTPUT Peak on-state voltage ITM = 1 A VTM - - 1.7 V Peak off-state current VDRM = 600 V IDRM - - 100 A RL = 100 IH - - 25 mA VIN = 400 VRMS (Fig. 3) dV/dtcr - 600 - V/s VIN = 240 VRMS, IT = 1 ARMS (Fig. 3) dV/dtcrq - 0.7 - V/s Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements RIN RL RTEST + 120 VCC - AC VIN VIN Mon CTEST RL 5 V, VCC 0V dV/dt dV/dt (c) 21575 Fig. 3 - dV/dt Test Circuit SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index Maximum rated withstanding isolation voltage Tested withstanding isolation voltage SYMBOL VALUE UNIT 40 / 85 / 21 2 Insulation group IIIa CTI 175 According to UL1577, t = 1 min VISO 4470 VRMS According to UL1577, t = 1 s VISO 5300 VRMS Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak Tamb = 25 C, VIO = 500 V RIO 1012 Tamb = 100 C, VIO = 500 V RIO 1011 PSO 2000 mW Input safety current ISI 150 mA Input safety temperature TSI 165 C 7 mm 7 mm 8 mm 8 mm 0.4 mm Isolation resistance Output safety power Creepage distance Clearance distance Creepage distance Clearance distance Insulation thickness DIP-8 SMD-8, option 7 DTI Note * This phototriac coupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with safety ratings shall be ensured by means of protective circuits Document Number: 83312 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 VO2223B www.vishay.com Vishay Semiconductors IF - Forward Current (mA) 100 85 C 25 C 10 0 C 55 C -40 C 1 0.8 1.0 1.2 1.4 1.6 ILKG - Off-State Leakage Current (nA) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 100 000 10 000 85 C 1000 55 C 100 25 C 10 0 C 1 -40 C 0.1 0.01 0 VF - Forward Voltage (V) NIFT - Normalized Trigger Input Current VR - Reverse Voltage (V) 400 500 600 1.5 50 45 Normalized to: IFT = 10 mA, VTM = 6 V, Tamb = 25 C 1.3 1.1 0.9 0.7 0.5 -15 10 35 60 85 -40 -15 10 35 60 85 Tamb - Ambient Temperature (C) Tamb - Ambient Temperature (C) Fig. 5 - Reverse Voltage vs. Ambient Temperature Fig. 8 - Normalized Trigger Input Current vs. Ambient Temperature 1.0 50 IFT - Trigger Input Current (mA) ITM - Peak On-State Current (A) 300 Fig. 7 - Off-State Leakage Current vs. Off-State Voltage 55 0.8 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.8 200 VDRM - Off-State Voltage (V) Fig. 4 - Forward Current vs. Forward Voltage 40 -40 100 40 30 20 10 -1.2 -0.6 0 0.6 1.2 1 1.8 VTM - Peak On-State Voltage (V) Fig. 6 - On-State Current vs. On-State Voltage 21912 10 100 Turn-On Time (s) Fig. 9 - Trigger Input Current vs. Turn-On Time Document Number: 83312 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 VO2223B NIH - Normalized Holding Current www.vishay.com Vishay Semiconductors 2.5 2.0 1.5 1.0 0.5 0 -40 -15 10 35 60 85 Tamb - Ambient Temperature (C) Fig. 10 - Normalized Holding Current vs. Ambient Temperature IFT - Trigger Input Current (mA) 5.5 5.0 4.5 4.0 3.5 3.0 20 40 60 80 100 Trigger Pulse Width (s) 21914 Fig. 11 - Trigger Input Current vs. Trigger Pulse Width IFT - Trigger Input Current (mA) 5 4 3 2 1 0 21915 100 200 300 400 500 600 VT - Terminal Voltage (V) Fig. 12 - Trigger Input Current vs. Terminal Voltage Document Number: 83312 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 VO2223B www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) Pin one ID 4 3 5 6 2 1 6.48 6.81 8 ISO method A 9.63 9.91 Option 7 0.76 7.62 typ. 1.14 7.62 typ. 0.79 4 typ. 3.30 3.81 0.7 1.27 10 0.51 0.89 0.46 0.56 2.79 3.30 3 to 9 5.84 6.35 8 min. 8.4 min. 10.3 max. 0.2 0.3 2.54 typ. 4.6 4.1 0.76 2.54 R 0.25 1.78 8 min. 11.05 1.52 PACKAGE MARKING (example of VO2223B-X001) VO2223B V YWW 68 Notes * The VDE logo is only marked on option 1 parts. Option information is not marked on the part * Tape and reel suffix (T) is not part of the package marking Document Number: 83312 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 VO2223B www.vishay.com Vishay Semiconductors PACKING INFORMATION DEVICE PER TUBE TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-8 50 40 2000 528 0.2 330 0.5 260 0.5 200 0.5 150 0.5 125 0.5 - 1.0 30 0.5 B VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC Detail B Detail A A - 1.0 - 1.0 3 0.5 - 1.0 380 1 0.7 0.5 1.0 14 x 13 x 10 = 130 12 0.3 B 6.6 0.3 Transparent rigid PVC 2.7 0.2 R 0. 1 6 4.4 0.3 0. 5 11 0.3 R 0.6 0.1 10 A Detail A Detail B 5.7 0.15 // 0.2 B 17996 Not to scale Section A - B Fig. 13 - Shipping Tube Specifications for DIP Packages ESD sticker Tape slot in core Top cover tape 330 (13") Regular, special or bar code label Embossed carrier Embossment 17999 17998 Fig. 14 - Tape and Reel Shipping Medium Fig. 15 - Tape and Reel Shipping Medium Document Number: 83312 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 VO2223B www.vishay.com Vishay Semiconductors 4 0.1 (1.57 0.004) 2 0.05 (0.079 0.002) 1.5 (0.059) min. Pin 1 and top of component 0.35 (0.014) 10 pitch cumulative tolerance on tape 0.2 (0.008) 1.75 0.1 (0.069 0.004) Top cover tape 10.41 (0.410) 7.5 0.05 16.0 0.3 (0.295 0.002) (0.630 0.012) 4.7 (0.185) 10.21 (0.402) 13.3 (0.523) 12.0 (0.472) 0.1 (0.004) max. Embossment Center lines of cavity 18008 1.5 (0.059) Direction of feed Fig. 16 - Tape and Packing (1000 pieces on reel) SOLDER PROFILES Axis Title Axis Title 10000 5s 10000 300 Lead temperature Full line: typical Dotted lines: process limits Second wave 1000 ca. 2 K/s ca. 200 K/s 150 Max. 260 C 100 C to 130 C 100 100 2 K/s 50 10 94 8626 1000 200 Max. 30 s 150 Max. 120 s 100 Max. 100 s Max. ramp down 6 C/s 100 100 150 Max. ramp up 3 C/s 50 0 50 245 C ca. 5 K/s Forced cooling 0 255 C 240 C 217 C 250 2nd line Temperature (C) 200 235 C to 260 C Wirst wave 1st line 2nd line 2nd line Temperature (C) 250 1st line 2nd line 300 200 Time (s) Fig. 17 - Recommended Wave Soldering Double Wave Profile for DIP Devices 10 0 0 250 19841 50 100 150 200 250 300 Time (s) Fig. 18 - Recommended Lead (Pb)-free Reflow Solder Profile for SMD Devices HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Floor life: unlimited Conditions: Tamb < 30 C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 Document Number: 83312 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.1, 12-Dec-17 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000