DATA SHEET Form 1144-190509 PAGE 1 SNAP DIGITAL OUTPUT MODULES Features > Four channels per module > Convenient pluggable wiring terminals; accepts 22 to 14 AWG wire > Powered by a single 5-volt supply > Channel-specific LEDs > Operating temperature: -20 to 70 C > UL and CE approved (most modules); Factory Mutual approved (part numbers ending in FM) SNAP Digital Output Modules DESCRIPTION Opto 22 SNAP I/O digital output modules are part of the SNAP PAC System. Choose from AC or DC models. Optical isolation on all solid-state modules provides 4,000 volts of transient (4000 V for 1 ms) protection for sensitive control electronics from industrial field signals. Most SNAP digital modules have removable topmounted connectors to provide easy access for field wiring. All operate on 5 VDC control logic. Each digital module features integral channel-specific LEDs for convenient troubleshooting and maintenance. Each module is factory tested twice before shipment, and most modules are UL and CE approved. In addition, part numbers ending in FM are Factory Mutual approved. SNAP output modules are used to switch up to four separate AC or DC loads. Output modules that are fused use a standard fuse with a convenient handle for easy replacement. DC outputs are available in either a source or sink configuration. AC outputs are zero voltage turn on and zero current turn off for transient-free switching. SNAP-OAC5MA and SNAP-ODC5MA are special modules featuring manual-on/manual-off/automatic switches, ideal for diagnostic testing of control applications. The switches override output from the application, so you can quickly check field device wiring. These modules each contain four isolated channels. The SNAP-OAC5-i, SNAP-ODC5-i, and SNAP-ODC5A-i modules provide four isolated output channels. Part Numbers Part Description See pages SNAP-OAC5 SNAP 4-channel 12-250 VAC output, 5 VDC logic 3, 5 SNAP-OAC5MA SNAP 4-channel isolated 12-250 VAC output, 5 VDC logic with manual/auto switches 3, 6 SNAP-OAC5FM SNAP 4-channel 12-250 VAC output, 5 VDC logic 4, 5 SNAP-OAC5-i SNAP 4-channel isolated 12-250 VAC output, 5 VDC logic 3, 7 SNAP-OAC5-iFM SNAP 4-channel isolated 12-250 VAC output, 5 VDC logic 4, 7 SNAP-ODC5SRC SNAP 4-channel 5-60 VDC output, 5 VDC logic source 8, 12 SNAP-ODC5SRCFM SNAP 4-channel 5-60 VDC output, 5 VDC logic source 10, 12 SNAP-ODC5SNK 8, 13 SNAP 4-channel 5-60 VDC output, 5 VDC logic sink SNAP-ODC5SNKFM SNAP 4-channel 5-60 VDC output, 5 VDC logic sink 10, 13 SNAP-ODC5ASNK SNAP 4-channel 5-200 VDC output, 5 VDC logic sink 9, 13 SNAP-ODC5MA SNAP 4-channel isolated 5-60 VDC output, 5 VDC logic with manual/auto switches 9, 14 SNAP-ODC5-i SNAP 4-channel isolated 5-60 VDC output, 5 VDC logic 9, 15 SNAP-ODC5-iFM SNAP 4-channel isolated 5-60 VDC output, 5 VDC logic 11, 15 SNAP-ODC5A-i SNAP 4-channel isolated 5-200 VDC output, 5 VDC logic 9, 15 SNAP-ODC5A-iFM SNAP 4-channel isolated 5-200 VDC output, 5 VDC logic 11, 15 SNAP-RETN4 SNAP 4-module retention rail (OEM) -------- SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM) -------- SNAP-RETN6 SNAP 6-module retention rail (OEM) -------- SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM) -------- SNAP-FUSE4AB SNAP 4-amp fuse, 25-pack -------- SNAP-MODFUSEH SNAP digital output module fuse holder, 10-pack -------- OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 2 For Ethernet-based applications requiring higher density of digital I/O points, see Opto 22 form #1556, the SNAP High-Density Digital Module Data Sheet. Processor connector Module position zero Module connectors Retention bar I/O Processor Compatibility SNAP digital output modules are compatible with all SNAP PAC brains and rack-mounted controllers, including both standard wired models and Wired+WirelessTM models. Notes for legacy hardware: SNAP digital output modules are also compatible with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, as well as other SNAP brains such as the serial B3000 and the B3000HA. These modules can also be used on B-series and M-series mounting racks. INSTALLATION The following diagram shows part of a SNAP mounting rack. The rack is shown without screw connectors. Modules snap securely into place in the row of connectors on the rack. Each module connector has a number. Digital output modules and other types of SNAP I/O modules are mounted on the module connectors starting at module position zero. NOTE: Check the data sheet or user's guide for the brain or on-therack controller you are using to determine module features available and any restrictions on module placement. 1. Place the rack so that the module connector numbers are rightside up, with zero on the left, as shown in the diagram above. (If your rack has screw connectors, the screw connectors will be at the bottom.) 2. Position the module over the module connector, aligning the small slot at the base of the module with the retention bar on the rack. When positioning modules next to each other, be sure to align the male and female module keys at the tops of the modules before snapping a module into position. 3. With the module correctly aligned, push on the module to snap it into place. 4. Use standard 4-40 x 1/2 truss-head Phillips hold-down screws to secure both sides of each module. CAUTION: Do not over-tighten screws. See Specifications. 5. Follow the wiring diagrams beginning on page 5 to attach modules to the devices they monitor. Modules require a special tool (provided) for removal. OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 3 SPECIFICATIONS--AC MODULES SNAP-OAC5 Key Feature -- SNAP-OAC5MA SNAP-OAC5-i Diagnostic switches Four isolated channels Four isolated channels Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Line Voltage - Range 12-250 VAC 12-250 VAC 12-250 VAC Line Voltage - Nominal 120/240 VAC 120/240 VAC 120/240 VAC Current Rating 0 C to 70 C Ambient 3 amps per module 3 amps per module 3 amps per module Field Side Ratings (each channel) One Cycle Surge 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) Minimum Load Current 20 mA 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage at Nominal Voltage - 60 Hz 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC Peak Blocking Voltage 500 V 500 V 500 V Operating Frequency 25-65 Hz 25-65 Hz 25-65 Hz dV/ dt - Off-state 200 volts/msec 200 volts/msec 200 volts/msec dV/ dt - Commutating Snubbed for rated 0.5 power factor load Snubbed for rated 0.5 power factor load Snubbed for rated 0.5 power factor load Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part: BEL 5HF4 Opto 22 Part: SNAP-FUSE4AB Has four isolated channels. Has four isolated channels. User must provide own fusing. User must provide own fusing. Channel-to-channel isolation Not applicable 300 VAC (1500 V transient) 300 VAC (1500 V transient) Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms 220 ohms Logic Side Ratings Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum Number of Channels Per Module 4 4 4 Turn-on Time 0.5 cycle maximum (zero volts crossover) 0.5 cycle maximum (zero volts crossover) 0.5 cycle maximum (zero volts crossover) Turn-off Time 0.5 cycle maximum (zero current crossover) 0.5 cycle maximum (zero current crossover) 0.5 cycle maximum (zero current crossover) 4,000 volts (transient) 4,000 volts (transient) Module Ratings Isolation (Field Side to Logic Side) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage Wire size range 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS Warranty Lifetime 30 months Lifetime OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 4 SPECIFICATIONS--AC MODULES (CONTINUED) SNAP-OAC5-FM SNAP-OAC5-i-FM Key Feature Factory Mutual approved Four isolated channels Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Line Voltage - Range 12-250 VAC 12-250 VAC Line Voltage - Nominal 120/240 VAC 120/240 VAC Current Rating 0 C to 70 C Ambient 3 amps per module 3 amps per module One Cycle Surge 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) Minimum Load Current 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage at Nominal Voltage - 60 Hz 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC Peak Blocking Voltage 500 V 500 V Operating Frequency 25-65 Hz 25-65 Hz dV/ dt - Off-state 200 volts/msec 200 volts/msec dV/ dt - Commutating Snubbed for rated 0.5 power factor load Snubbed for rated 0.5 power factor load Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part No. SNAP-FUSE4AB Has four isolated channels. User must provide own fusing. Channel-to-channel isolation Not applicable 300 VAC (1500 V transient) Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Channels Per Module 4 4 Turn-on Time 0.5 cycle maximum (zero volts crossover) 0.5 cycle maximum (zero volts crossover) Turn-off Time 0.5 cycle maximum (zero current crossover) 0.5 cycle maximum (zero current crossover) Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage Wire size range 22 to 14 AWG 22 to 14 AWG Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS Warranty Lifetime Lifetime Field Side Ratings (each channel) Logic Side Ratings Module Ratings OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 5 SCHEMATICS SNAP-OAC5 Output Module Part Number Description SNAP-OAC5 4-channel AC output 12-250 VAC 5 VDC logic SNAP-OAC5FM 4-channel AC output 12-250 VAC 5 VDC logic, Factory Mutual approved OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 6 SCHEMATICS SNAP-OAC5MA Output Module With Manual/Auto Switches Part Number Description SNAP-OAC5MA 4-channel isolated AC output 12-250 VAC, 5 VDC logic, with manual/auto switch OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 7 SCHEMATICS SNAP-OAC5i Isolated Output Module Part Number Description SNAP-OAC5-i 4-channel isolated AC output 12-250 VAC, 5 VDC logic SNAP-OAC5-iFM 4-channel isolated AC output 12-250 VAC, 5 VDC logic, Factory Mutual approved OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 8 SPECIFICATIONS--DC MODULES SNAP-ODC5SRC SNAP-ODC5SNK Key Feature Load sourcing Load sinking Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Line Voltage - Range 5-60 VDC 5-60 VDC Line Voltage - Nominal 5-48 VDC 5-48 VDC Current Rating 0 C to 70 C Ambient 3 amps per module 3 amps per module Surge Current 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC Peak Blocking Voltage 60 VDC 60 VDC Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB Channel-to-channel isolation Not applicable Not applicable Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Field Side Ratings (each channel) Logic Side Ratings Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Number of Channels Per Module 4 4 Turn-on Time 100 usec 100 usec Turn-off Time 750 usec 750 usec Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage Module Ratings Wire size range 22 to 14 AWG 22 to 14 AWG Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, CSA, RoHS, DFARS Warranty Lifetime Lifetime OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 9 SPECIFICATIONS--DC MODULES (CONTINUED) SNAP-ODC5MA Key Feature Diagnostic switches Four isolated channels SNAP-ODC5-i SNAP-ODC5A-i Four isolated channels Four isolated channels SNAP-ODC5ASNK Load sinking Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5-60 VDC 5-60 VDC 5-200 VDC 5-200 VDC Line Voltage - Nominal 5-48 VDC 5-48 VDC 5-200 VDC 5-200 VDC Current Rating 0 C to 70 C Ambient 2 amps per module 0.5 amps per channel 3 amps per module 3 amps per module 3 amps per module Surge Current 1.5 amps peak for 1 second 5 amps peak for 1 second 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC 1 mA @ 200 VDC 1 mA @ 200 VDC Peak Blocking Voltage 60 VDC 60 VDC 200 VDC 200 VDC Field Side Ratings (each channel) Line Voltage - Range Fuse (Common to all Channels) Has four isolated channels. User must provide own fusing. Has four isolated channels. User must provide own fusing. Has four isolated channels. User must provide own fusing. 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part: BEL 5HF4 Opto 22 Part: SNAPFUSE4AB Channel-to-channel isolation 300 VAC (1500 V transient) 300 VAC (1500 V transient) 300 VAC (1500 V transient) Not applicable Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC 1 VDC 1 VDC Logic Side Ratings Control Resistance 220 ohms 220 ohms 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum Number of Channels Per Module 4 4 4 4 Turn-on Time 100 usec 100 usec 100 usec 100 usec Turn-off Time 750 usec 750 usec 750 usec 750 usec Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage Wire size range 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG Module Ratings Agency Approvals UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS Warranty 30 months Lifetime Lifetime Lifetime OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 10 SPECIFICATIONS--DC MODULES (CONTINUED) SNAP-ODC5SRCFM SNAP-ODC5SNKFM Key Feature Factory Mutual approved Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Line Voltage - Range 5-60 VDC 5-60 VDC Line Voltage - Nominal 5-48 VDC 5-48 VDC Field Side Ratings (each channel) Current Rating 0C to 70C Ambi3 amps per module ent 3 amps per module Surge Current 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC Peak Blocking Voltage 60 VDC 60 VDC Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB 4 V @ 5.5 mA 4 V @ 5.5 mA Logic Side Ratings Pickup Voltage Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Number of Channels Per Module 4 4 Turn-on Time 100 usec 100 usec Turn-off Time 750 usec 750 usec Module Ratings Isolation (Field Side to Logic Side) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage 4,000 volts (transient) -20 to 70 C, operating -40 to 85 C, storage Wire size range 22 to 14 AWG 22 to 14 AWG Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS Warranty Lifetime Lifetime OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 11 SPECIFICATIONS--DC MODULES (CONTINUED) Key Feature SNAP-ODC5-iFM SNAP-ODC5A-iFM Four isolated channels Factory Mutual approved Four isolated channels Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Field Side Ratings (each channel) Line Voltage - Range 5-60 VDC 5-200 VDC Line Voltage - Nominal 5-48 VDC 5-200 VDC Current Rating 0C to 70C Ambient 3 amps per module 3 amps per module Surge Current 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC Peak Blocking Voltage 60 VDC 200 VDC Fuse (Common to all Channels) Has four isolated channels. Has four isolated channels. User must provide own fusing. User must provide own fusing. Logic Side Ratings Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Module Ratings Number of Channels Per Module 4 4 Turn-on Time 100 usec 100 usec Turn-off Time 750 usec 750 usec Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage Wire size range 22 to 14 AWG 22 to 14 AWG Agency Approvals CE, FM, ATEX, RoHS, DFARS CE, FM, RoHS, DFARS Warranty Lifetime Lifetime OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 12 SCHEMATICS SNAP-ODC5SRC Output Module-- Sourcing Part Number Description SNAP-ODC5SRC 4-channel DC output 5-60 VDC logic source SNAP-ODC5SRCFM 4-channel DC output 5-60 VDC logic source, Factory Mutual approved OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 13 SCHEMATICS SNAP-ODC5SNK and SNAP-ODC5ASNK Output Modules--Sinking Part Number Description SNAP-ODC5SNK 4-channel DC output 5-60 VDC logic sink SNAP-ODC5SNKFM 4-channel DC output 5-60 VDC logic sink, Factory Mutual approved SNAP-ODC5ASNK 4-channel DC output 5-200 VDC logic sink OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 14 SCHEMATICS SNAP-ODC5MA Output Module with Manual/Auto Switches Part Number Description SNAP-ODC5MA 4-channel isolated DC output 5-60 VDC, 5 VDC logic, with manual/auto switches OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 15 SCHEMATICS SNAP-ODC5-i and SNAP-ODC5A-i Isolated Output Module Part Number Description SNAP-ODC5-i 4-channel isolated DC output 5-60 VDC, 5 VDC logic SNAP-ODC5A-i 4-channel isolated DC output 5-200 VDC, 5 VDC logic SNAP-ODC5-iFM 4-channel isolated DC output 5-60 VDC, 5 VDC logic, Factory Mutual approved SNAP-ODC5A-iFM 4-channel isolated DC output 5-200 VDC, 5 VDC logic, Factory Mutual approved OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 16 DIMENSIONAL DRAWING All Models Except MA OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 17 DIMENSIONAL DRAWING All MA Models OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 18 DIMENSIONAL DRAWING All Models IMPORTANT: The mounting rack connector has 24 pins; the module connector has 20 pins. The extra pins on the mounting rack connector prevent misalignment of the module during installation. OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 1144-190509 PAGE 19 DIMENSIONAL DRAWING All Models SNAP Digital Module Mounted on SNAP Rack OPTO 22 * www.opto22.com 43044 Business Park Dr. Temecula, CA 92590-3614 SALES * sales@opto22.com 800-321-6786 * 1-951-695-3000 SUPPORT * support@opto22.com 800-835-6786 * 1-951-695-3080 (c) 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. More about Opto 22 PRODUCTS * Opto 22 develops and manufactures reliable, easy-to-use, open standards-based hardware and software products. * Industrial automation, process control, building automation, industrial refrigeration, remote monitoring, data acquisition, and industrial internet of things (IIoT) applications worldwide all rely on Opto 22. * * groov EPIC(R) System Opto 22's groov Edge Programmable Industrial Controller (EPIC) system is the culmination of over 40 years of experience in designing products for the automation industry. groov EPIC gives you an industrially hardened system with guaranteed-for-life I/O, a flexible Linux(R)-based controller with gateway functions, and software for your IIoT application or any application. Access to the Linux operating system through a secure shell (SSH) to download and run custom applications groov View for building and viewing your own deviceindependent HMI Node-RED for creating simple logic flows from pre-built nodes Ignition Edge(R) from Inductive Automation(R), with OPC-UA drivers to Allen-Bradley(R), Siemens(R), and other control systems, and MQTT/Sparkplug communications for efficient IIoT data transfer Older products From solid state relays (our first products) to world-famous G4 and SNAP I/O, to SNAP PAC controllers, Opto 22 products last a long time. You can count on us to give you the reliability and service you expect. QUALITY Founded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. groov EPIC I/O I/O provides the local connection to sensors and equipment. groov I/O offers up to 24 channels on each I/O module, with a spring-clamp terminal strip, integrated wireway, and swing-away cover. Because we test each product twice before it leaves our factory rather than testing a sample of each batch, we can guarantee most solid-state relays and optically isolated I/O modules for life. Opto 22 I/O is so reliable, we can afford to guarantee it for life. groov I/O is hot swappable, UL Hazardous Locations approved, and ATEX compliant. groov EPIC Processor The heart of the system is the groov EPIC processor. It handles a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing. In addition, the EPIC provides secure data communications among physical assets, control systems, software applications, online services, and more, both on premises and in the cloud. Configuring and troubleshooting I/O and networking is easier with the EPIC's integrated high-resolution touchscreen. Authorized users can see your groov View HMI locally on the touchscreen or on a monitor connected via the HDMI or USB ports. groov EPIC Software Software included in the groov EPIC controller: * PAC Control engine to run PAC Control strategies and PAC Display projects * CODESYS Runtime engine to run IEC61131-3 compliant programs built with CODESYS Development System OPTO 22 * www.opto22.com 43044 Business Park Dr. Temecula, CA 92590-3614 FREE PRODUCT SUPPORT Opto 22's California-based Product Support Group offers free, comprehensive technical support for Opto 22 products from engineers with decades of training and experience. Support is available in English and Spanish by phone or email, Monday-Friday, 7 a.m. to 5 p.m. PST. Support is always available on our website, including online training, how-to videos, user's guides, the Opto 22 KnowledgeBase, troubleshooting tips, and OptoForums. In addition, free hands-on training is available at our Temecula, California headquarters, and you can register online. PURCHASING OPTO 22 PRODUCTS Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-321-6786 (toll-free in the U.S. and Canada) or +1-951-695-3000, or visit our website at www.opto22.com. SALES * sales@opto22.com 800-321-6786 * 1-951-695-3000 SUPPORT * support@opto22.com 800-835-6786 * 1-951-695-3080 (c) 2001-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1335-181003