Ø8 mm panel mount LED indicators
Q8 series
ELECTRICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All
Types)
02 (No Resistor)* 1.8 to 3.3 VDC 20 mA max
6 VDC 5.4 to 6.6 VDC 20 mA
12 VDC 10.8 to 13.2 VDC 20 mA
24 VDC 21.6 to 26.4 VDC 20 mA
28 VDC 25.2 to 30.8 VDC 20 mA
110 VAC 99 to 121 VAC 6 mA
220 VAC 207 to 235 VAC 3 mA
* Customer to supply resistor for desired operating
current.
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 80 mcd 8 mcd 2.0 V
Green 60 mcd 6 mcd 2.2 V
Yellow 50 mcd 6 mcd 2.1 V
Blue 1,600 mcd 50 mcd 3.3 V
White 1,600 mcd 500 mcd 3.3 V
Orange 60 mcd 110 mcd 2.2 V
Bi-color (Typical)
(Red/Green) 14/30 mcd 15/10 mcd 2.0V/2.2 V
Tri-color (Typical)
(Red/Green/Yellow) 60/15/13 mcd 15/10/6 mcd 2.0 V/2.2 V/2.1 V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is
produced.
STANDARD LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 5,000 mcd 1,300 mcd 2.2 V
Green 10,000 mcd 1,200 mcd 3.3 V
Yellow 4,000 mcd 350 mcd 2.0 V
Blue 2,200 mcd 280 mcd 3.3 V
White 2,500 mcd 950 mcd 3.3 V
Orange 4,000 mcd 500 mcd 2.2 V
SUPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 6,000 mcd 980 mcd 2.2 V
Green 1,900 mcd 300 mcd 3.3 V
Yellow 1,600 mcd 250 mcd 2.0 V
Orange 2,400 mcd 110 mcd 2.2 V
HYPER BRIGHT LED INTENSITY
• The operating voltage must not be exceeded by more that
10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led
unless otherwise stated.
• Luminous intensities and color shades of white LEDs may
vary within a batch.
• Luminous intensity will be reduced with lower operating
current.
2
LED INDICATORS