1. Product profile
1.1 General description
Planar Schottky barrier diodes with an integrated guard ring for stress protection,
encapsulated in a very small SOT323 (SC-70) Surface-Mounted Device (SMD) plastic
package.
1.2 Features and benefits
Low forward voltage
Low capacitance
AEC-Q101 qualified
1.3 Applications
1.4 Quick reference data
[1] Pulse test: tp300 s; 0.02.
2. Pinning information
BAT54W series
Schottky barrier diodes
Rev. 3 — 20 November 2012 Product data sheet
SOT323
Ultra high-speed switching Voltage clamping
Line termination Reverse polarity protection
Table 1. Quick reference data
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Per diode
VRreverse voltage - - 30 V
VFforward voltage IF=100mA [1] --800mV
IRreverse current VR=25V [1] --2A
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
BAT54W
1 anode
2 not connected
3 cathode
12
3
006aaa436
1
3
2
n.c.
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 2 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
3. Ordering information
4. Marking
[1] * = placeholder for manufacturing site code.
BAT54AW
1 cathode (diode 1)
2 cathode (diode 2)
3 common anode
BAT54CW
1 anode (diode 1)
2 anode (diode 2)
3 common cathod e
BAT54SW
1 anode (diode 1)
2 cathode (diode 2)
3 cathode (diode 1),
anode (diode 2)
Table 2. Pinning …continued
Pin Description Simplified outline Graphic symbol
12
3
006aaa439
12
3
12
3
006aac984
12
3
12
3
006aaa437
12
3
Tabl e 3. Ordering i nfo rmation
Type number Package
Name Description Version
BAT54W series SC-70 plastic surface-mounted package; 3 leads SOT323
Table 4. Marking codes
Type number Marking code[1]
BAT54W L4*
BAT54AW 42*
BAT54CW 43*
BAT54SW 44*
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 3 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
5. Limiting values
[1] Tj=25C before surge.
[2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Per diode
VRreverse voltage - 30 V
IFforward current - 200 mA
IFRM repetitive peak forward
current tp1s; 0.5 300 mA
IFSM non-repetitive peak
forward current square wave;
tp<10ms [1] -600mA
Per device; one diode loaded
Ptot total power dissipation Tamb 25 C[2] -200mW
Tjjunction temperature - 150 C
Tamb ambient temperature 55 +150 C
Tstg storage temperature 65 +150 C
Table 6. Thermal characteristics
Symbol Parameter Conditions Min Typ Max Unit
Per device; one diode loaded
Rth(j-a) thermal resistance from
junction to ambient in free air [1] - - 625 K/W
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 4 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
7. Characteristics
[1] Pulse test: tp300 s; 0.02.
[2] When switched from IF= 10 mA to IR=10mA; R
L= 100 ; measured at IR=1mA.
Table 7. Characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Per diode
VFforward voltage [1]
IF= 0.1 mA - - 240 mV
IF= 1 mA - - 320 mV
IF= 10 mA - - 400 mV
IF= 30 mA - - 500 mV
IF= 100 mA - - 800 mV
IRreverse current VR=25V [1] --2A
Cddiode capacitance f = 1 MHz; VR=1V --10pF
trr reverse recovery time [2] --5ns
(1) Tamb = 125 C
(2) Tamb =85C
(3) Tamb =25C
(1) Tamb = 125 C
(2) Tamb =85C
(3) Tamb =25C
Fig 1. Forward current as a function of forward
voltage; typical values Fig 2. Reverse current as a function o f reverse
voltage; typical values
006aac829
VF (V)
0.0 1.20.80.4
1
10
102
103
IF
(mA)
10-1
(1)
(1) (2)
(2) (3)
(3)

9
5
9




,5
$




BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 5 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
f=1MHz; T
amb =25C
Fig 3. Diod e capacitance as a function of reverse voltage; typical values
(1) IR=1mA
Fig 4. Reverse recovery time test circuit and waveforms
trr
(1)
+ IFt
output signal
trtpt
10 %
90 %
VR
input signal
V = VR + IF × RS
RS = 50
Ω
IF
D.U.T.
Ri = 50
Ω
SAMPLING
OSCILLOSCOPE
mga881
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 6 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
9. Package outline
10. Packing information
[1] For further information and the availability of packing methods, see Section 14.
Fig 5. Package outline SOT323 (SC-70)
04-11-04Dimensions in mm
0.45
0.15
1.1
0.8
2.2
1.8
2.2
2.0 1.35
1.15
1.3
0.4
0.3 0.25
0.10
12
3
Table 8. Packing methods
The indicated -xxx are the last thre e digits of the 12NC ordering code.[1]
Type number Package Description Packing quantity
3000 10000
BAT54W series SOT323 4 mm pitch, 8 mm tape and reel -115 -135
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 7 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
11. Soldering
Fig 6. Reflow soldering footprint SOT323 (SC-70)
Fig 7. Wave soldering footprint SOT323 (SC-70)
solder lands
solder resist
occupied area
solder paste
sot323_fr
2.65
2.35 0.6
(3×)
0.5
(3×)
0.55
(3×)
1.325
1.85
1.3
3
2
1
Dimensions in mm
sot323_fw
3.65 2.1
1.425
(3×)
4.6
09
(2×)
2.575
1.8
solder lands
solder resist
occupied area
preferred transport
direction during soldering
Dimensions in mm
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 8 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
12. Revision history
Table 9. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BAT54W _SER v.3 20121120 Product data sheet - BAT54W v.2
Modifications: The format of this document has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
Legal texts have been adapted to the new company name where appropriate.
Section 1: updated
Section 4: updated
Table 5: updated ambient temperature Tamb maximum value to 150 C
Figure 1 to 4: updated
Section 8 “Test in f ormation: added
Figure 5: replaced by mi nimized package outline drawing
Section 10 “Packing information: added
Section 11 “Soldering: added
Section 13 “Legal information: updated
BAT54W v.2 19960319 Product specification - BAT54W v.1
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 9 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short dat a sheet, the
full data sheet shall pre vail.
Product specificationThe information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Se miconductors takes no
responsibility for the content in this document if provided by an inf ormation
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect , incidental,
punitive, special or consequ ential damages (including - wit hout limitatio n - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ ag gregate and cumulati ve liability toward s
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semicondu ctors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. Unless ot herwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, lif e-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in perso nal injury, death or severe propert y or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconducto rs products in such equipment or
applications an d ther efo re su ch inclusi on a nd/or use is at the cu stome r's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty tha t such application s will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using NXP Semiconductors product s, and NXP Semiconductors
accepts no liability for any assistance with applicati ons or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suit able and fit for the custome r’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for th e customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by cu stomer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanent ly and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the ter ms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] dat a sheet Production This document contains the product specification.
BAT54W_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 November 2012 10 of 11
NXP Semiconductors BAT54W series
Schottky barrier di od e s
No offer to sell or license — Nothing in this document may be interpret ed or
construed as an of fer to sell product s that is op en for accept ance or the grant ,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respect i ve ow ners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP Semiconductors BAT54W series
Schottky barrier di od e s
© NXP B.V. 2012. All rights reserved.
For more information, please visit: http://www.nxp.co m
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of rele ase: 20 November 2012
Document identifier : BAT54W_SER
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
15. Contents
1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Thermal characteristics . . . . . . . . . . . . . . . . . . 3
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 5
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 5
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
10 Packing information . . . . . . . . . . . . . . . . . . . . . 6
11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14 Contact information. . . . . . . . . . . . . . . . . . . . . 10
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11