58
G6S PCB Relay
Surface Mou nting DPDT Relay
■Long terminals for ideal for soldering and mount-
ing reliability.
■Space-saving inside-L terminal.
■High dielectric strength between coil and contacts
(2,000 VAC), and between contacts of different
polar it y (1,500 VAC).
■High impulse withstand voltages between coil and
contacts, and between contacts of different polar-
ity (2,500 V, 2 10 µs: Bellcore requirements).
■Low power consumption (140 mW).
■Bifurcated crossbar contact (Au-clad) and Fully
sealed construction for high reliability.
■Applicable to IRS.
■High sealability after IRS.
■Ultra-miniature at 15 7.5 9.4 mm (L W H).
■Through-hole terminal is available
■EN6095 0/E N410 03 Sup pl eme ntary Insula tio n-
certified type is available.
Ordering Information
Model Number Le gend
1. Relay Function
None: Single-side stable
U: Single-winding latching
K: Double-winding latching
2. Contact Form
2: DPDT
3. Terminal Shape
None: Through-hole term inal
G: Inside-L surface mounting terminal
F: Outside-L surface mounting terminal
4. Approve d Stand ards
None: UL/CSA
Y: EN60950/EN41003
5. Rated Coil Voltage
4.5, 5, 12, 24 V DC
Classification Single-side
stable Single-winding
latching Double-winding
latching Single-side stable
EN60950/EN41003
DPDT Fully
sealed Through-hole terminal G6S-2 G6SU-2 G6SK-2 G6S-2-Y
Surface mount-
ing ter minal Inside-L G6S-2G G6SU-2G G6SK-2G G6S-2G-Y
Outside-L G6S-2F G6SU-2F G6SK-2F G6S-2F-Y
Rated coil voltage
Note: 1. When ordering, add the rated coil voltage to the model number.
Example: G6S-2F 12 VDC
2. When ordering tape packing, add -TR" to the model number.
Example: G6S-2F-TR 12 VDC
Be sure since -TR" is not part of the relay model number, it is not marked on the relay case.
Tape packing
G6S
@
-
@@
-
@
@
VDC
1 2 3 4 5
59
G6SG6S
Specifications
■Coil Ratings
Single-side Stable Type (G6S-2, G6S-2F, G6S-2G)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C.
Single-winding Latc hing Type (G6SU-2, G6SU-2F, G6SU-2G)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C.
Double-winding Latching Type (G6SK-2, G6SK-2F, G6SK-2G)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C.
Single-side Stable EN60950/EN41003 Approved Type (G6S-2-Y, G6S-2F-Y, G6S-2G-Y)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C.
Rated voltage 4.5 VDC 5 VDC 12 VDC 24 VDC
Rated current 31.0 mA 28.1 mA 11.7 mA 8.3 mA
Coil resistance 145
W
178
W
1,028
W
2,880
W
Must operate voltage 75% max. of rated voltage
Must release voltage 10% min. of rated voltage
Max. voltage 200% of rated voltage at 23°C 170% of rated voltage
at 23°C
Power consumption Approx. 140 mW Approx. 200 mW
Rated voltage 4.5 VDC 5 VDC 12 VDC 24 VDC
Rated current 22.2 mA 20 mA 8.3 mA 6.3 mA
Coil resistance 203
W
250
W
1,440
W
3,840
W
Coil inductance
(H) (ref. value) Armature OFF 0.27 0.36 2.12 5.80
Armature ON 0.14 0.18 1.14 3.79
Must set voltage 75% max. of rated voltage
Must reset voltage 75% max. of rated voltage
Max. voltage 180% of rated voltage at 23°C
Power consumption Approx. 100 mW Approx. 150 mW
Rated voltage 4.5 VDC 5 VDC 12 VDC 24 VDC
Rated current 44.4 mA 40 mA 16.7 mA 12.5 mA
Coil resistance 101
W
125
W
720
W
1,920
W
Coil induc-
tance (H)
(ref. value)
Set Armature OFF 0.12 0.14 0.60 1.98
Armature ON 0.074 0.088 0.41 1.23
Reset Armature OFF 0.082 0.098 0.46 1.34
Armature ON 0.14 0.16 0.54 2.23
Must set voltage 75% max. of rated voltage
Must reset voltage 75% max. of rated voltage
Max. voltage 170% of rated voltage at 23°C 140% of rated voltage
at 23°C
Power consumption Approx. 200 mW Approx. 300 mW
Rated voltage 5 VDC 12 VDC 24 VDC
Rated current 40 mA 16.7 mA 9.6 mA
Coil resistance 125
W
720
W
2,504
W
Must operate voltage 75% max. of rated voltage
Must release voltage 10% min. of rated voltage
Max. voltage 170% of rated voltage at 23°C 170% of rated voltage
at 23°C
Power consumption Approx. 200 mW Approx. 230 mW
60
G6SG6S
■Contact Rating s
Note P level: l60 = 0.1 x 10-6/operation
■Characteristics
■Approved Standards
UL1950 (File No. E41515)/CSA C22.2 No.950 (File No. LR24825)
EN60950/EN41003
Load Resistive load (cos
f
= 1)
Rated load 0.5 A at 125 VAC; 2 A at 30 VDC
Contact material Ag (Au -clad)
Rated carry current 2 A
Max. switching voltage 250 VAC, 220 VDC
Max. switching current 2 A
Max. switching power 62.5 VA, 60 W
Failure rate (reference value) 10 µA at 10 m VDC
Contact resistance 75 m
W
max.
Operate (set) time 4 ms max. (mean value: approx. 2.5 ms; latching type: approx. 2 ms)
Release (reset) time 4 ms max. (mean value: approx. 1.5 ms; latching type: approx. 2 ms)
Bounce time Operate: Approx. 0.5 ms
Release: Approx. 0.5 ms
Set/Reset: Approx. 0.5 ms
Max. operating frequency Mechanical: 36,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance 1,000 M
W
min. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between coil and contacts
1,000 VAC, 50/60 Hz for 1 min between coil and contacts (double-winding latching)
1,500 VAC, 50/60 Hz for 1 min between contacts of different polarity
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
500 VAC, 50/60 Hz for 1 min between set and reset coil (double-winding latching)
Impulse withstand voltage 2,500 V (2 x 10 µs) between coil a nd contacts
1,500 V (10 x 160 µs) between coil and contacts (double-winding latching)
2,500 V (2 x 10 µs) between contacts of different polarity
1,500 V (10 x 160 µs) between contacts of same polarity (conforms to FCC Part 68)
Vibration resistance Destruct ion: 10 to 55 to 10 Hz, 2.5-mm single amplitude (5-mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 1.65-mm single amplitude (3.3-mm double amplitude)
Shock resistance Destruction: 1,000 m/s2 (approx. 100G)
Malfunction: 750 m/s2 (approx. 75G)
Endurance Mec hanical: 100,000,000 operations min. (at 36,000 operations/hr)
Electrical: 100,000 operations min. (2 A at 30 VDC, resistive load: 1,200 operations/hr)
100,000 operations min. (0.5 A at 125 VAC, resistive load)
Ambient temperature Operating:
-
40°C to 85°C (with no ic ing),
-
40°C to 70°C (double-winding latching, 24 VDC)
Ambient humidity Operating: 5% to 85%
Weight Approx. 2 g
Model Contact form Coil ratings Contact ratings
G6S-2, G6S-2F, G6S-2G DPDT 1.5 to 48 VDC 2 A, 30 VDC
0.3 A, 110 VDC
0.5 A, 125 VAC
G6SU2, G6 SK-2, G6SU-2F,
G6SU2G, G6SK-2F, G6SK-2G 1.5 to 24 VDC
Model Contact form Isolation catego ry Voltage
G6S-2-Y, G6S-2G-Y, G6S-2F-Y DPDT Supplementary Isolation 250 VAC
61
G6SG6S
Engineering Data
Maximum Switching Power
Single-winding Latching
Double-winding Latching
Switching current (A)
Switching voltage (V) Ambient temperature (°C)
Maximum coil voltage (%)
Ambient Temperature vs.
Maximum Coil Voltage
Single-side Stable
Ambient temperature (°C)
Maximum coil voltage (%)
G6SU
G6SK
12 VDC
max. G6SK
24 VDC
AC resistive load
DC resistive load
12 VDC max.
24 VDC
(G6S-Y, 12 VDC max.)
Reference Data
Ambient Temperature vs. Switching Current
Single-side Stable
Switching current (A)
Single-winding Latching
Double-winding Latching
Ambient temperature (°C)
G6SU
12 VDC max.
G6SU
24 VDC
G6SK
12 VDC max.
G6SK
24 VDC
Operating current (A)
Ambient temperature (°C)
12 VDC max.
24 VDC
(G6S-Y)
24 VDC
(G6S-Y, 12 VDC
max.)
24 VDC
(G6S-Y)
Note: The maximum coil voltage refers to the maximum value in a varying range of operating
power voltage, not a continuous voltage.
Recommended Soldering Time vs. Surface PCB Temperature
(The temperature profile indicates the temperature on the surface of the PCB.)
IRS
Time (s)
Temperature ( C)
°
Soldering
Preheating
62
G6SG6S
Dimensions
Note All units are in millimeters unless otherwise indicated.
Orientation mark
Single-side Stable
G6S-2, G6S-2-Y
Tolerance: ±0.3 Footprint
(Bottom View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Bottom View)
G6S-2G, G6S-2G-Y
Tolerance: ±0.3
Footprint
(Top View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Top View)
Orientation mark
G6S-2F, G6S-2F-Y
Tolerance: ±0.3 Footprint
(Top View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Top View)
Eight, 1-dia. holes Orientation mark
63
G6SG6S
Single-winding Latching
G6SU-2
Tolerance: ±0.3 Footprint
(Bottom View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Bottom View)
G6SU-2G
Tolerance: ±0.3 Footprint
(Top View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Top View)
Orientation mark
7.3+0.2
7.3+0.2
Orientation mark
G6SU-2F
Tolerance: ±0.3 Footprint
(Top View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Top View)
Eight, 1-dia. holes Orientation mark
64
G6SG6S
Double-winding Latching
G6SK-2
Tolerance: ±0.3 Footprint
(Bottom View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Bottom View)
G6SK-2G
Tolerance: ±0.3 Footprint
(Top View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Top View)
Orientation mark
Orientation mark
7.3+0.2
G6SK-2F
Tolerance: ±0.3 Footprint
(Top View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Top View)
Ten, 1-dia. holes Orientation mark
65
G6SG6S
■Tape Packing
When ordering, add “-TR” before the rated coil voltage for tape packing.
Tape type:TE2416R (Refer to EIAJ)
Reel type:R24E (Refer to EI AJ)
Relays per reel:400
Precautions
Use a DC power supply with 5% or less ripple factor to operate
the coil.
Do not use the G6S where subject to s trong external magnetic
fields.
Do not use the G6S where subject to magnetic particles or e xces-
sive amounts of dust.
Do not reverse the polarity of the coil (+,
-
).
Latching types are deliv ered in the reset position. We recommend
that a reset voltage be applied in advance to start operation.
Do not drop the G6S or otherwise subject it to e xcessive shock.
Remove the relay from the packing immediat ely pr ior to usage.
G6S-2F, G6SU-2F, G6SK-2F, G6S-2F-Y
G6S-2G, G6SU-2G, G6SK-2G, G6S-2G-Y
Cover tape
Emboss tape
Carrier tape
13±0.2
2±10.5
2±0.3
29.5±1.0
25.5±0.5
R1.0
330
80
Feed direction
Orientation mark
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K093-E1-2D
