HMC813LC4B v03.0614 POWER DETECTORS - SMT SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz Typical Applications Features The HMC813LC4B is ideal for: High Logging Range: 55 dB * EW, ELINT & IFM Receivers Frequency Flatness: 1.5 dB * DF Radar Systems Saturated Output Power: -7 dBm * ECM Systems Fast Rise/Fall Times: 5/10 ns * Broadband Test & Measurement Single Positive Supply: +3.3V * Power Measurement & Control Circuits ESD Sensitivity (HBM): Class 1A * Military & Space Applications 24 Lead 4x4 mm SMT Package: 16 mm Functional Diagram General Description The HMC813LC4B is a Successive Detection Log Video Amplifier (SDLVA) with a limited RF output which operates from 1 to 20 GHz. The HMC813LC4B provides a logging range of 55 dB. This device offers typical fast rise/fall times of 5/10 ns. The HMC813LC4B log video output slope is typically 15 mV/dB. Maximum recovery times are less than 15 ns. Ideal for high speed channelized receiver applications, the HMC813LC4B operates from a single +3.3 V supply, and consumes only 153 mA. The HMC813LC4B is available in a highly compact 4x4 mm SMT ceramic package and is ideal for high speed channelized receiver applications. Electrical Specifications, TA = +25 C, Vcc1 = Vcc2 = Vcc3 = 3.3V [1] Parameter Input Frequency Range Conditions [2] Frequency Flatness (Video out) Typ. Units 1 - 20 GHz Pin= -25 dBm 1.5 dB Pin= -40 dBm to +0 dBm 1 dB -55 to +85 C, Pin= -20 dBm 0.5 dB Minimum Logging Range to 3 dB error @ 18 GHz -53 dBm Maximum Logging Range to 3 dB error @ 18 GHz 7 dBm -7 dBm Log Linearity Log Linearity over Temperature Saturated Output Power, Psat Saturated Output Power Flatness 1.5 dB 8 dB RF Output Return Loss 18 dB Log Video Minimum Output Voltage 0.9 V RF Input Return Loss Log Video Maximum Output Voltage 1.73 V Log Video Output Rise Time Pin = 0 dBm, 10% to 90% 5 ns Log Video Output Fall Time Pin = 0 dBm, 90% to 10% 10 ns [1] Electrical specifications and performance plots are given for single-ended operation. [2] Video output load should be 1K Ohm or higher. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz Parameter Conditions Typ. Units -40 dBm to 0 dBm 15 ns 15 mV/dB @ 10 GHz 10 V/dBC Log Video Propagation Delay 15 ns Supply Current (Idc) 153 mA Log Video Recovery Time Log Video Output Slope Log Video Output Slope Variation over Temperature [1] Electrical specifications and performance plots are given for single-ended operation Error Flatness vs. Input Power Over Frequency [1] VIDEO OUT & Error vs. Input Power, Fin = 1 GHz [1] 4 2 0 -1 2 1 1.5 0 -1 1 ERROR (dB) 1 Ideal Video Out +25C Video Out +85C Video Out -40C VIDEO OUT (V) 3 ERROR (dB) 3 2 1GHz 2GHz 6GHz 10GHz 14GHz 18GHz 20GHz 22GHz 26GHz POWER DETECTORS - SMT Electrical Specifications, (continued) [1] -2 ERR +25C ERR +85C ERR -40C -3 -4 -60 -3 0.5 -50 -40 -30 -20 -10 0 10 -60 -50 -40 INPUT POWER (dBm) 3 10 3 -1 1 ERR +25C ERR +85C ERR -40C 1 1.5 0 -1 1 ERR +25C ERR +85C ERR -40C -2 -3 0.5 -10 2 0 10 INPUT POWER (dBm) -2 -3 0.5 -60 ERROR (dB) 0 VIDEO OUT (V) 1 -20 0 Ideal Video Out +25C Video Out +85C Video Out -40C 2 1.5 -30 -10 2 ERROR (dB) VIDEO OUT (V) Ideal Video Out +25C Video Out +85C Video Out -40C -40 -20 VIDEO OUT & Error vs. Input Power, Fin = 6 GHz [1] 2 -50 -30 INPUT POWER (dBm) VIDEO OUT & Error vs. Input Power, Fin = 2 GHz [1] -60 -2 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) [1] Electrical specs and performance plots are given for single-ended operation Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz VIDEO OUT & Error vs. Input Power, Fin = 10 GHz [1] VIDEO OUT & Error vs. Input Power, Fin = 14 GHz [1] 3 0 -1 1 ERR +25C ERR +85C ERR -40C VIDEO OUT (V) 1 1.5 -40 -30 -20 -10 1 1.5 0 -1 1 ERR +25C ERR +85C ERR -40C -3 -50 0 -60 -50 -40 3 -1 1 ERR +25C ERR +85C ERR -40C 3 1 1.5 0 -1 1 ERR +25C ERR +85C ERR -40C -3 -10 0 -60 -3 -50 -40 3 Ideal Video Out +25C Video Out +85C Video Out -40C -10 0 10 3 2 Ideal Video Out +25C Video Out +85C Video Out -40C 1 1.5 -1 1 ERR +25C ERR +85C ERR -40C 1 1.5 0 -1 1 ERR +25C ERR +85C ERR -40C -2 -3 0.5 -10 2 0 10 INPUT POWER (dBm) -2 -3 0.5 -60 ERROR (dB) 0 VIDEO OUT (V) 2 ERROR (dB) VIDEO OUT (V) -20 VIDEO OUT & Error vs. Input Power, Fin = 26 GHz [1] 2 -20 -30 INPUT POWER (dBm) VIDEO OUT & Error vs. Input Power, Fin = 22 GHz [1] -30 -2 0.5 10 INPUT POWER (dBm) -40 2 -2 0.5 -50 10 ERROR (dB) 0 VIDEO OUT (V) 1 1.5 -60 0 Ideal Video Out +25C Video Out +85C Video Out -40C 2 -20 -10 2 ERROR (dB) VIDEO OUT (V) Ideal Video Out +25C Video Out +85C Video Out -40C -30 -20 VIDEO OUT & Error vs. Input Power, Fin = 20 GHz [1] 2 -40 -30 INPUT POWER (dBm) VIDEO OUT vs. Error vs. Input Power, Fin = 18 GHz [1] -50 -2 -3 0.5 10 INPUT POWER (dBm) -60 2 -2 0.5 -60 Ideal Video Out +25C Video Out +85C Video Out -40C 2 ERROR (dB) VIDEO OUT (V) Ideal Video Out +25C Video Out +85C Video Out -40C 3 2 ERROR (dB) POWER DETECTORS - SMT 2 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) [1] Electrical specs and performance plots are given for single-ended operation 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz Saturated RF Output Power vs. Frequency Over Temperature @ Pin = -10 dBm [1] VIDEO OUT vs. Frequency Over Input Power & Temperature [1] -10 dBm VIDEO OUT (V) 1.5 RF OUTPUT POWER (dBm) +25C +85C -40C 1.6 1.4 1.3 -25 dBm 1.2 1.1 -40 dBm -5 -10 -15 +25C +85C -40C -20 1 0.9 0 5 10 15 20 25 -25 30 0 5 FREQUENCY (GHz) PHASE DELTA FROM 0 dBm (degrees) RF OUTPUT POWER (dBm) -5 -10 -15 2GHz 10GHz 20GHz -25 -40 -30 -20 -10 0 -20 -30 -10 dBm -20 dBm -30 dBm -40 dBm -50 dBm -60 dBm -40 -50 0 5 -20 -30 -10 dBm -20 dBm -30 dBm -40 dBm -50 dBm -60 dBm 5 10 15 20 15 20 25 30 Phase Linearity over Frequency @ -40 C Temperature [1] PHASE DELTA FROM 0 dBm (degrees) PHASE DELTA FROM 0 dBm (degrees) -10 0 10 FREQUENCY (GHz) 0 -60 30 -10 -60 10 Phase Linearity over Frequency @ 85 C Temperature [1] -50 25 0 INPUT POWER (dBm) -40 20 Phase Linearity over Frequency @ 25 C Temperature [1] 0 -30 -50 15 FREQUENCY (GHz) RF Output Power vs. Input Power Over Frequency [1] -20 10 POWER DETECTORS - SMT 0 1.7 25 30 FREQUENCY (GHz) 0 -10 -20 -30 -40 -10 dBm -20 dBm -30 dBm -40 dBm -50 dBm -60 dBm -50 -60 0 5 10 15 20 25 30 FREQUENCY (GHz) [1] Electrical specs and performance plots are given for single-ended operation Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz Fall Time for Various Frequencies @ Pin = 0 dBm [1] 1.8 1.8 1.6 1.6 VIDEO OUT (V) VIDEO OUT (V) 1.4 1.2 2 GHz 10 GHz 20 GHz 1 0.8 0 20 40 60 80 2 GHz 10 GHz 20 GHz 1.4 1.2 1 0.8 100 0 20 40 60 80 100 TIME (ns) TIME (ns) Return Loss vs. Frequency Over Temperature [1] 0 +25C +85C -40C -5 RETURN LOSS (dB) POWER DETECTORS - SMT Rise Time for Various Frequencies @ Pin = 0 dBm [1] -10 RF INPUT -15 RF OUTPUT -20 -25 0 5 10 15 20 25 30 FREQUENCY (GHz) [1] Electrical specs and performance plots are given for single-ended operation 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz Vcc1, Vcc2, Vcc3, Vcc4 +3.6V ENBL +3.6V RF Input Power +15 dBm Channel Temperature 125 C Continuous Pdiss (T=85C) Derate 12.63 mW/C above 85C 0.51 W Thermal Resistance (Channel to die bottom) 79.20 C/W Storage Temperature -65 to +150 C Operating Temperature -55 to +85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing POWER DETECTORS - SMT Absolute Maximum Ratings NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC813LC4B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H813 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz POWER DETECTORS - SMT Pin Descriptions 7 Pin Number Function Description 1-3, 6-9, 11-13, 19, 24 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 4, 5 RFINP, RFINN RF Input pins. Connect RF to RFINP, and AC couple RFINN to ground via 50 Ohm for single ended operation. 10 VIDEO OUT Video out load should be at least 1K Ohm or higher. 14, 15 RFOUTN, RFOUTP RF Output pins. Connect RF to RFOUTP, and AC couple RFOUTN to ground via 50 Ohm for single ended operation 16, 18 GND These pins and the exposed package bottom must be connected to a high quality RF/DC ground. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz Pad Descriptions (Continued) Function Description 17 EN Enable pin, connected to supply voltage for normal operation. Total supply current reduced to less than 3mA when EN is set to 0V. 20 VCC3 Interface Schematic Bias supply. Connect supply voltage to these pins with appropriate filtering. See application circuit. 22, 23 21 VCC1 To ensure proper start-up supply rise time should be faster than 100usec VCC2 Bias supply. Connect supply voltage to this pin with appropriate filtering. See application circuit. POWER DETECTORS - SMT Pin Number To ensure proper start-up supply rise time should be faster than 100usec Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8 HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz POWER DETECTORS - SMT Application Circuit *C1, C2 and C4 are ultra-wideband capacitors. Note: Video output load should be 1K Ohm or higher. 9 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC813LC4B v03.0614 SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) WITH LIMITED RF OUTPUT, 1 - 20 GHz POWER DETECTORS - SMT Evaluation PCB List of Materials for Evaluation PCB 131679 [1] Item Description J1, J2 K-Type Connector J3 SMA Connector J4 - J6 DC Pins C1, C2, C4 100 nF Ultra-Wideband Capacitor, 0402 Pkg. ATC ATC545L104KW16T C5 - C9 10 nF Capacitor, 0402 Pkg. C10 4.7 F Tantalum Capacitor, CASE A Pkg. R2 10 Ohm Resistor, 0402 Pkg. R3 1k Ohm Resistor, 0402 Pkg. R5, R7 49.9 Ohm Resistor, 0402 Pkg. R8 0 Ohm Resistor, 0402 Pkg. U1 HMC813LC4B SDLVA The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25 FR Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10