For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
1
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
General Description
Features
Functional Diagram
Typical Applications
Electrical Specications, TA = +25 °C, Vcc1 = Vcc2 = Vcc3 = 3.3V [1]
The HMC813LC4B is a Successive Detection Log
Video Amplier (SDLVA) with a limited RF output
which operates from 1 to 20 GHz. The HMC813LC4B
provides a logging range of 55 dB. This device offers
typical fast rise/fall times of 5/10 ns. The HMC813LC4B
log video output slope is typically 15 mV/dB. Maximum
recovery times are less than 15 ns. Ideal for high speed
channelized receiver applications, the HMC813LC4B
operates from a single +3.3 V supply, and consumes
only 153 mA. The HMC813LC4B is available in a highly
compact 4x4 mm SMT ceramic package and is ideal for
high speed channelized receiver applications.
High Logging Range: 55 dB
Frequency Flatness: ±1.5 dB
Saturated Output Power: -7 dBm
Fast Rise/Fall Times: 5/10 ns
Single Positive Supply: +3.3V
ESD Sensitivity (HBM): Class 1A
24 Lead 4x4 mm SMT Package: 16 mm²
The HMC813LC4B is ideal for:
• EW, ELINT & IFM Receivers
• DF Radar Systems
• ECM Systems
• Broadband Test & Measurement
• Power Measurement & Control Circuits
• Military & Space Applications
Parameter Conditions Typ. Units
Input Frequency Range[2] 1 - 20 GHz
Frequency Flatness (Video out) Pin= -25 dBm ±1.5 dB
Log Linearity Pin= -40 dBm to +0 dBm ±1 dB
Log Linearity over Temperature -55 to +85° C, Pin= -20 dBm ±0.5 dB
Minimum Logging Range to ±3 dB error @ 18 GHz -53 dBm
Maximum Logging Range to ±3 dB error @ 18 GHz 7 dBm
Saturated Output Power, Psat -7 dBm
Saturated Output Power Flatness ±1.5 dB
RF Input Return Loss 8dB
RF Output Return Loss 18 dB
Log Video Minimum Output Voltage 0.9 V
Log Video Maximum Output Voltage 1.73 V
Log Video Output Rise Time Pin = 0 dBm, 10% to 90% 5 ns
Log Video Output Fall Time Pin = 0 dBm, 90% to 10% 10 ns
[1] Electrical specications and performance plots are given for single-ended operation.
[2] Video output load should be 1K Ohm or higher.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
2
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
Electrical Specications, (continued) [1]
Parameter Conditions Typ. Units
Log Video Recovery Time -40 dBm to 0 dBm 15 ns
Log Video Output Slope 15 mV/dB
Log Video Output Slope Variation over Temperature @ 10 GHz 10 µV/dB°C
Log Video Propagation Delay 15 ns
Supply Current (Idc) 153 mA
Error Flatness vs.
Input Power Over Frequency [1]
VIDEO OUT & Error
vs. Input Power, Fin = 1 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 2 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 6 GHz [1]
[1] Electrical specications and performance plots are given for single-ended operation
[1] Electrical specs and performance plots are given for single-ended operation
-4
-3
-2
-1
0
1
2
3
4
-60 -50 -40 -30 -20 -10 0 10
1GHz
2GHz
6GHz
10GHz
14GHz
18GHz
20GHz
22GHz
26GHz
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
3
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
VIDEO OUT & Error
vs. Input Power, Fin = 10 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 22 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 14 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 26 GHz [1]
VIDEO OUT vs. Error
vs. Input Power, Fin = 18 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 20 GHz [1]
[1] Electrical specs and performance plots are given for single-ended operation
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
0.5
1
1.5
2
-3
-2
-1
0
1
2
3
-60 -50 -40 -30 -20 -10 0 10
ERR +25C
ERR +85C
ERR -40C
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT (V)
ERROR (dB)
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
4
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
VIDEO OUT vs. Frequency
Over Input Power & Temperature [1]
Saturated RF Output Power vs. Frequency
Over Temperature @ Pin = -10 dBm [1]
RF Output Power vs. Input Power
Over Frequency [1]
Phase Linearity over Frequency @ 25 C
Temperature [1]
Phase Linearity over Frequency @ 85 C
Temperature [1]
Phase Linearity over Frequency @ -40 C
Temperature [1]
[1] Electrical specs and performance plots are given for single-ended operation
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
0 5 10 15 20 25 30
+25C
+85C
-40C
FREQUENCY (GHz)
VIDEO OUT (V)
-10 dBm
-25 dBm
-40 dBm
-25
-20
-15
-10
-5
0
0 5 10 15 20 25 30
+25C
+85C
-40C
FREQUENCY (GHz)
RF OUTPUT POWER (dBm)
-30
-25
-20
-15
-10
-5
0
-50 -40 -30 -20 -10 0 10
2GHz
10GHz
20GHz
INPUT POWER (dBm)
RF OUTPUT POWER (dBm)
-60
-50
-40
-30
-20
-10
0
0 5 10 15 20 25 30
-10 dBm
-20 dBm
-30 dBm
-40 dBm
-50 dBm
-60 dBm
FREQUENCY (GHz)
PHASE DELTA FROM 0 dBm (degrees)
-60
-50
-40
-30
-20
-10
0
0 5 10 15 20 25 30
-10 dBm
-20 dBm
-30 dBm
-40 dBm
-50 dBm
-60 dBm
FREQUENCY (GHz)
PHASE DELTA FROM 0 dBm (degrees)
-60
-50
-40
-30
-20
-10
0
0 5 10 15 20 25 30
-10 dBm
-20 dBm
-30 dBm
-40 dBm
-50 dBm
-60 dBm
FREQUENCY (GHz)
PHASE DELTA FROM 0 dBm (degrees)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
5
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
Return Loss vs. Frequency
Over Temperature [1]
Rise Time for Various Frequencies
@ Pin = 0 dBm [1]
Fall Time for Various Frequencies
@ Pin = 0 dBm [1]
[1] Electrical specs and performance plots are given for single-ended operation
-25
-20
-15
-10
-5
0
0 5 10 15 20 25 30
+25C
+85C
-40C
FREQUENCY (GHz)
RETURN LOSS (dB)
RF INPUT
RF OUTPUT
0.8
1
1.2
1.4
1.6
1.8
0 20 40 60 80 100
2 GHz
10 GHz
20 GHz
TIME (ns)
VIDEO OUT (V)
0.8
1
1.2
1.4
1.6
1.8
0 20 40 60 80 100
2 GHz
10 GHz
20 GHz
TIME (ns)
VIDEO OUT (V)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
6
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
Outline Drawing
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Vcc1, Vcc2, Vcc3, Vcc4 +3.6V
ENBL +3.6V
RF Input Power +15 dBm
Channel Temperature 125 °C
Continuous Pdiss (T=85°C)
Derate 12.63 mW/°C above 85°C 0.51 W
Thermal Resistance
(Channel to die bottom) 79.20 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -55 to +85 °C
ESD Sensitivity (HBM) Class 1A
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC813LC4B Alumina, White Gold over Nickel MSL3 [1] H813
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
7
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1-3, 6-9, 11-13,
19, 24 N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
4, 5 RFINP, RFINN RF Input pins. Connect RF to RFINP, and AC couple
RFINN to ground via 50 Ohm for single ended operation.
10 VIDEO OUT Video out load should be at least 1K Ohm or higher.
14, 15 RFOUTN,
RFOUTP
RF Output pins. Connect RF to RFOUTP, and AC couple
RFOUTN to ground via 50 Ohm for single ended operation
16, 18 GND These pins and the exposed package bottom must be
connected to a high quality RF/DC ground.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
8
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
Pin Number Function Description Interface Schematic
17 EN
Enable pin, connected to supply voltage for normal
operation. Total supply current reduced to less than 3mA
when EN is set to 0V.
20 VCC3
Bias supply. Connect supply voltage to
these pins with appropriate ltering.
See application circuit.
To ensure proper start-up supply
rise time should be faster than 100usec
22, 23 VCC1
21 VCC2
Bias supply. Connect supply voltage to
this pin with appropriate ltering.
See application circuit.
To ensure proper start-up supply
rise time should be faster than 100usec
Pad Descriptions (Continued)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
9
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
Application Circuit
*C1, C2 and C4 are ultra-wideband capacitors.
Note: Video output load should be 1K Ohm or higher.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
POWER DETECTORS - SMT
10
HMC813LC4B
v03.0614
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 - 20 GHz
Evaluation PCB
List of Materials for Evaluation PCB 131679 [1]
Item Description
J1, J2 K-Type Connector
J3 SMA Connector
J4 - J6 DC Pins
C1, C2, C4 100 nF Ultra-Wideband Capacitor, 0402
Pkg. ATC ATC545L104KW16T
C5 - C9 10 nF Capacitor, 0402 Pkg.
C10 4.7 µF Tantalum Capacitor, CASE A Pkg.
R2 10 Ohm Resistor, 0402 Pkg.
R3 1k Ohm Resistor, 0402 Pkg.
R5, R7 49.9 Ohm Resistor, 0402 Pkg.
R8 0 Ohm Resistor, 0402 Pkg.
U1 HMC813LC4B SDLVA
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
The circuit board used in the application should
use RF circuit design techniques. Signal lines sho-
uld have 50 ohm impedance while the package
ground leads and exposed paddle should be
connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board
shown is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D