02/02/00 4SIGOUT.DOC PAGE 1
METRAL 4 AND 5 ROW SIGNAL PIN VERTICAL HEADER REMOVAL TOOLING
THERE ARE NUMEROUS TOOLS AVAILABLE TO REMOVE EITHER SINGLE OR MULTIPLE PINS.
SINGLE PIN REMOVAL TOOLS:
MT-330 P/N 194208-001
THIS TOOL IS USED TO PUSH SINGLE SIGNAL PINS OUT FROM THE BACK SIDE OF THE BOARD.
MT-340 P/N 194204-001
THIS TOOL IS USED TO PULL SINGLE SIGNAL PINS OUT FROM THE MATING SIDE OF THE
CONNECTOR.
MT370-01 P/N MT370-01
THIS IS A SHELF LEVEL REPAIR KIT THAT HAS TOOLS TO REMOVE SINGLE PINS (POWER OR
SIGNAL) WHEN THE BOARD IS IN A RACK. IT CAN ALSO BE USED WHEN THE BOARD IS NOT IN A
RACK.
IT ALSO CONTAINS TOOLS TO REMOVE SINGLE (12MM) MODULE HOUSINGS FROM THE PINS.
INSERTION TOOL PUSH-OUT TOOL
CUTTER TOOL
INSERTION TOOL
EXTRACTION TOOL
SHELF LEVEL PRESS-FIT
REPAIR KIT
02/02/00 4SIGOUT.DOC PAGE 2
METRAL 4 AND 5 ROW SIGNAL PIN VERTICAL HEADER REMOVAL TOOLING CON’T
MULTIPLE PIN REMOVAL TOOLS
HT-0531 P/N 415878-001
THIS KIT IS DESIGNED TO REMOVE A GRID OF 4 X 6 SIGNAL PINS BY PUSHING THEM THRU THE
BOARD FROM THE BOTTOM SIDE OF THE BOARD. IN ORDER FOR THE TOOL TO WORK THE PIN
MUST PROTRUDE .080 INCHES BELOW THE BOTTOM OF THE BOARD. AFTER ALL OF THE PINS IN
THE HEADER HAVE BEEN REMOVED THE HEADER WILL BE FREE OF THE BOARD. THIS KIT
REQUIRES THE USE OF AN ARBOR PRESS THAT IS NOT PROVIDED WITH THE KIT.
HT-0532 P/N 415878-002
THIS KIT IS DESIGNED TO REMOVE A GRID OF 5 X 6 SIGNAL PINS BY PUSHING THEM THRU THE
BOARD FROM THE BOTTOM SIDE OF THE BOARD. IN ORDER FOR THE TOOL TO WORK THE PIN
MUST PROTRUDE .080 INCHES BELOW THE BOTTOM OF THE BOARD. AFTER ALL OF THE PINS IN
THE HEADER HAVE BEEN REMOVED THE HEADER WILL BE FREE OF THE BOARD. THIS KIT
REQUIRES THE USE OF AN ARBOR PRESS THAT IS NOT PROVIDED WITH THE KIT.
02/02/00 4SIGOUT.DOC PAGE 3
