MS27468K
5
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Interface dimensions shall be in accordance with MIL-DTL-38999.
Mating connectors: MS27467, MS 27661 and MS 27653.
Insert arrangements: See MIL-STD-1560.
Hex nut: See MS3186.
Part or Identifyi ng Number (PI N) example:
MS27468 T 13 B 98 P A
MS number
Class
Shell size
Finish
Insert arrangement
Contact style
Polarizing positions
No letter designator is required for normal.
Specification restrictions
Entire specification sheet
inactive for new design.
For ground equipment only, class
E is inactive for new design.
Classes E and P are
inactive for new design.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue, due to t he extent of the changes.
Referenced documents. In addition to M IL-DTL-38999, this document references the following:
MIL-STD-1560
MS3186
MS27467
MS27661
MS27653
Source: https://assist.dla.mil -- Downloaded: 2015-06-30T09:50Z
Check the source to verify that this is the current version before use.