Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Lxx06xx & Qxx06xx & Qxx06xHx Series RoHS Description This 6 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type components guarantee gate control in Quadrants I & IV as needed for digital control circuitry. Standard type components normally operate in Quadrants I & III triggered from AC line. Alternistor type components only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Features & Benefits * No contacts to wear out from reaction of switching events * RoHS compliant Agency Approval Agency * Glass - passivated junctions Agency File Number * Restricted (or limited) RFI generation, depending on activation point of sine wave * Voltage capability up to 1000 V E71693* * Surge capability up to 85 A * - L Package Only Main Features Symbol Value Unit IT(RMS) 6 A VDRM / VRRM 400, 600, 800 or 1000 V IGT (Q1) 5 to 50 mA * Only requires a short gate activation pulse during each half-cycle * The L-package has an isolation rating of 2500VRMS * Solid-state switching eliminates arcing or contact bounce that create voltage transients Applications Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Schematic Symbol MT2 Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. MT1 Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring the highest commutation performance. G Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Absolute Maximum Ratings -- Sensitive Triac (4 Quadrants) Symbol Parameter Lxx06Ly/Lxx06Vy/Lxx06Dy TC = 80C Lxx06Ry/Lxx06Ny TC = 85C IT(RMS) RMS on-state current (full sine wave) ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25C) 2 It I t Value for fusing di/dt Critical rate of rise of on-state current IG = 50mA with 0.1s rise time f = 120 Hz IGTM Peak gate trigger current tp=20s PG(AV) Average gate power dissipation Value Unit 6 A f = 50 Hz t = 20 ms 50 f = 60 Hz t = 16.7 ms 60 tp = 8.3 ms 2 A 15 A2s TJ = 110C 70 A/s TJ = 110C 4 A TJ = 110C 0.4 W Tstg Storage temperature range -40 to 150 C TJ Operating junction temperature range -40 to 110 C Note: xx = voltage/10, y = sensitivity (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Absolute Maximum Ratings -- Standard Triac Symbol Parameter Unit 6 A TC = 95C Qxx06Ly TC = 90C f = 50 Hz t = 20 ms 65 f = 60 Hz t = 16.7 ms 80 IT(RMS) RMS on-state current (full sine wave) ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25C) I2t I2t Value for fusing di/dt Critical rate of rise of on-state current IG = 200mA with 0.1s rise time f = 120 Hz IGTM Peak gate trigger current tp=20s tp = 8.3 ms Average gate power dissipation PG(AV) Value Qxx06Ry / Qxx06Ny A 26.5 A 2s TJ = 125C 70 A/s TJ = 125C 4 A TJ = 125C 0.5 W Tstg Storage temperature range -40 to 150 C TJ Operating junction temperature range -40 to 125 C Note: xx = voltage/10, y = sensitivity Absolute Maximum Ratings -- Alternistor Triac (3 Quadrants) Symbol IT(RMS) Parameter RMS on-state current (full sine wave) Qxx06LHy/Qxx06VHy/Qxx06DHy TC = 95C Qxx06RHy/Qxx06NHy TC = 100C f = 50 Hz ITSM t = 20 ms Non repetitive surge peak on-state current (full cycle, TJ initial = 25C) f = 60 Hz It I t Value for fusing 2 t = 16.7 ms tp = 8.3 ms 2 Value Unit 6 A Qxx06VHy Qxx06DHy 55 Qxx06LHy Qxx06RHy Qxx06NHy 80 Qxx06VHy Qxx06DHy 65 Qxx06LHy Qxx06RHy Qxx06NHy 85 Qxx06VHy Qxx06DHy 17.5 A A2s Qxx06LHy Qxx06RHy Qxx06NHy 30 di/dt Critical rate of rise of on-state current f = 120 Hz TJ = 125C 70 A/s IGTM Peak gate trigger current tp 10 s; IGT IGTM TJ = 125C 1.6 A PG(AV) Average gate power dissipation TJ = 125C 0.5 W Tstg Storage temperature range -40 to 150 C TJ Operating junction temperature range -40 to 125 C Note: xx = voltage/10, y = sensitivity Additional Information Datasheet Resources Samples (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Electrical Characteristics (TJ = 25C, unless otherwise specified) -- Sensitive Triac (4 Quadrants) Value Symbol Test Conditions IGT VD = 12V RL = 60 I - II - III IV MAX. VGT VD = 12V RL = 60 ALL MAX. 1.3 V VGD VD = VDRM RL = 3.3 k TJ = 110C ALL MIN. 0.2 V IT = 100mA IH dv/dt Quadrant Lxx06x5 Lxx06x6 Lxx06x8 5 5 5 10 10 20 MAX. 400V VD = VDRM Gate Open TJ = 100C TYP. 600V 10 10 20 30 30 40 20 20 30 Unit mA mA V/s (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 110C TYP. 1 2 2 V/s tgt IG = 2 x IGT PW = 15s IT = 8.5 A(pk) TYP. 3.0 3.0 3.2 s Electrical Characteristics (TJ = 25C, unless otherwise specified) -- Standard Triac Value Symbol Test Conditions Quadrant IGT VD = 12V RL = 60 I - II - III IV MAX. TYP. VGT VD = 12V RL = 60 I - II - III MAX. 1.3 V VGD VD = VDRM RL = 3.3 k TJ = 125C ALL MIN. 0.2 V IT = 200mA IH MAX. dv/dt 25 50 50 75 Unit mA 50 mA 120 600V 100 MIN. 800V VD = VDRM Gate Open TJ = 100C Qxx06x5 50 400V VD = VDRM Gate Open TJ = 125C Qxx06x4 V/s 85 1000V 100 (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 125C TYP. 4 4 V/s tgt IG = 2 x IGT PW = 15s IT = 8.5 A(pk) TYP. 3.0 3.0 s Electrical Characteristics (TJ = 25C, unless otherwise specified) -- Alternistor Triac (3 Quadrants) Symbol IGT VGT VGD IH Test Conditions VD = 12V RL = 60 VD = 12V RL = 60 VD = VDRM RL = 3.3 k TJ = 125C MAX. I - II - III MAX. 1.3 V I - II - III MIN. 0.2 V IT = 100mA MAX. Qxx06LHy / Qxx06RHy / Qxx06NHy (dv/dt)c tgt MIN. ALL 35 15 35 400V 75 400 600V 50 300 800V VD = VDRM Gate Open TJ = 125C VD = VDRM Gate Open TJ = 100C 10 Unit I - II - III Qxx06VHy / Qxx06DHy dv/dt Value Qxx06xH3 Qxx06xH4 Quadrant mA mA 200 400V 75 450 600V 50 350 800V 250 1000V 150 V/s (di/dt)c = 3.2 A/ms TJ = 125C MIN. 20 25 V/s IG = 2 x IGT PW = 15s IT = 8.5 A(pk) TYP. 4.0 4.0 s Note: xx = voltage/10, x = package, y = sensitivity (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Static Characteristics Symbol Test Conditions VTM ITM = 11.3A tp = 380 s Lxx06xy Qxx06xy IDRM / IRRM VDRM = VRRM Unit 1.60 V TJ = 25C 400 - 600V 20 A TJ = 110C 400 - 600V 0.5 mA TJ = 25C 400 - 1000V 50 A TJ = 125C 400 - 800V 2 TJ = 100C 1000V mA 3 MAX. 400 - 800V 10 1000V 20 TJ = 125C 400 - 800V 3 TJ = 100C 1000V 2 TJ = 25C Qxx06xHy MAX. Value A mA Thermal Resistances Symbol Parameter R(J-C) Junction to case (AC) R(J-A) Junction to ambient Value L/Qxx06Ryy / L/Qxx06Nyy 1.8 L/Qxx06Lyy 3.3 L/Qxx06Vyy / L/Qxx06Dyy 3.2 L/Qxx06Ryy 45 L/Qxx06Lyy 50 L/Qxx06Vyy 70 Unit C/W C/W Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Figure 2: N ormalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature Figure 1: Definition of Quadrants ALL POLARITIES ARE REFERENCED TO MT1 + (+) I GT GATE MT1 I GT REF (-) MT1 I GT GATE (+) MT1 REF REF QII QI QIII QIV MT2 IGT I GT GATE 4.0 MT2 - + IGT MT2 IGT (TJ = 25C) (-) MT2 POSITIVE (Positive Half Cycle) Ratio of MT2 3.0 2.0 1.0 I GT GATE MT2 NEGATIVE (Negative Half Cycle) MT1 REF 0.0 -65 -40 -15 10 35 60 85 110 125 Junction Temperature (TJ)- C NOTE: Alternistors will not operate in QIV Note: Alternistors will not operate in QIV (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: N ormalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature VGT IH (TJ = 25C) 1.5 1.0 Ratio of 2.0 VGT (TJ = 25C) 2.0 3.0 Ratio of IH 4.0 1.0 0.5 0.0 0.0 -65 -40 -15 10 35 60 85 110 -65 125 -40 Junction Temperature (TJ)- C 35 60 85 110 125 Figure 6: M aximum Allowable Case Temperature vs. On-State Current (Sensitive Triac) 120 Maximum Allowable Case Temperature (TC) - C 18 Average On-State Power Dissipation (PD(AV)) - Watts 10 Junction Temperature (TJ)- C Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 16 14 110 Lxx06Ry 100 12 10 8 6 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 4 2 0 0 2 4 6 8 10 12 14 16 90 Lxx06Ly Lxx06Vy Lxx06Dy 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings 70 60 0 1 RMS On-State Current (IT(RMS)) - Amps 2 3 4 5 6 7 RMS On-State Current (IT(RMS)) - Amps Figure 7: Maximum Allowable Case Temperature vs. On-State Current (Standard Triac) Figure 8: M aximum Allowable Case Temperature vs. On-State Current (Alternistor Triac) 130 Maximum Allowable Case Temperature (TC) - C 130 Maximum Allowable Case Temperature (TC) - C -40 120 Qxx06Ry Qxx06Ny 110 100 Qxx06Ly 90 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings 70 120 Qxx06RHy Qxx06NHy 110 100 Qxx06LHy Qxx06VHy Qxx06DHy 90 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings 70 60 60 0 1 2 3 4 5 RMS On-State Current (IT(RMS)) - Amps (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 6 7 0 1 2 3 4 5 RMS On-State Current (IT(RMS)) - Amps 6 7 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 9: Maximum Allowable Ambient Temperature vs. On-State Current (Sensitive / Standard Triac) Figure 10: Maximum Allowable Ambient Temperature vs. On-State Current (Alternistor Triac) 120 Maximum Allowable Ambient Temperature (TA) - C Maximum Allowable Ambient Temperature (TA) - C 120 100 Lxx06Ly Lxx06Ry 80 Qxx06Ly Qxx06Ry Qxx06Ny L/Qxx06Vy 60 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 FREE AIR RATING - NO HEATSINK 40 20 100 Qxx06LHy Qxx06RHy Qxx06NHy 80 Qxx06VHy 60 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawing 40 20 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 RMS On-State Current (IT(RMS)) - Amps 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 RMS On-State Current [IT(RMS)] - Amps Figure 11: On-State Current vs. On-State Voltage (Typical) Postitive or Negative Instantaneous On-State Current (iT) - Amps 20 TC = 25C 18 16 14 12 10 8 6 4 2 0 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Postitive or Negative Instantaneous On-State Voltage (vT) - Volts (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 12: Surge Peak On-State Current vs. Number of Cycles (Sensitive / Standard Triac) 100 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps Qxx06Ly Qxx06Ry Qxx06Ny Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value. Lxx06Ly Lxx06Ry Lxx06Vy Lxx06Dy 10 1 1 10 100 1000 Surge Current Duration- Full Cycles Figure 13: Surge Peak On-State Current vs. Number of Cycles (Alternistor Triac) 100 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps Qxx06LHy Qxx06RHy Qxx06NHy Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value. Qxx06VHy Qxx06DHy 10 1 1 10 100 Surge Current Duration- Full Cycles Note: xx = voltage/10, x = package, y = sensitivity, (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 1000 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Soldering Parameters Pb - Free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5C/second max TS(max) to TL - Ramp-up Rate 5C/second max Reflow - Temperature (TL) (Liquidus) 217C - Temperature (tL) 60 - 150 seconds Peak Temperature (TP) 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Ramp-down Rate 5C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C Physical Specifications Terminal Finish 100% Matte Tin-plated Body Material UL Recognized compound meeting flammability rating V-0 Terminal Material Copper Alloy tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 tS time to peak temperature Careful selection of the correct components for the application's operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the components rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Environmental Specifications Test AC Blocking (VDRM) Design Considerations Ramp-do Ramp-down Temperature Cycling Temperature/ Humidity High Temp Storage Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40C to +150C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150C Low-Temp Storage 1008 hours; -40C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions -- TO-220AB (R-Package) -- Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT O A O E AREA (REF.) 0.17 IN2 Dimension 8.13 .320 P MT2 B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H N K J Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm). M MT1 MT2 GATE Inches Millimeters Min Max Min Max A 0.380 B 0.105 0.420 9.65 10.67 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Dimensions -- TO-220AB (L-Package) -- Isolated Mounting Tab TC MEASURING POINT O A O E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 A B C 13.36 .526 D 7.01 .276 F R G L H K N J M MT1 MT2 GATE (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm). Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions -- TO-263AB (N-Package) -- D2-PAK Surface Mount TC MEASURING POINT B Dimension AREA: 0.11 IN2 C V MT2 7.01 .276 A 8.41 .331 S W U MT1 G J K GATE 8.13 .320 H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 3.81 .150 Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1.14 1.52 E F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 2.03 .080 6.60 .260 Dimensions -- TO-251AA (V-Package) -- V-PAK Through Hole TC MEASURING POINT MT2 E H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C MT1 MT2 GATE F G I L Inches Millimeters Min Typ Max Min Typ Max A 0.037 0.040 0.043 0.94 1.01 1.09 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions -- TO-252AA (D-Package) -- D-PAK Surface mount MT2 E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension 5.34 .210 B C P Q MT1 GATE F MT2 1.60 .063 1.80 .071 AREA : 0.040 IN2 3 .118 G I O L K M N (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 J H 4.60 .181 Millimeters Typ Max Min A 0.037 0.040 0.043 0.94 1.01 1.09 B 0.235 0.243 0.245 5.97 6.16 6.22 A 6.71 .264 Inches Min Typ Max C 0.106 0.108 0.113 2.69 2.74 2.87 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0 0 5 0 0 5 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Product Selector Part Number Voltage 400V 600V 800V Gate Sensitivity Quadrants 1000V I - II - III IV Type Package Lxx06L5 X X 5 mA 5 mA Sensitive Triac TO-220L Lxx06D5 X X 5 mA 5 mA Sensitive Triac TO-252 D-PAK Lxx06R5 X X 5mA 5mA Sensitive Triac TO-220R Lxx06V5 X X 5 mA 5 mA Sensitive Triac TO-251 V-PAK Lxx06L6 X X 5 mA 10 mA Sensitive Triac TO-220L Lxx06D6 X X 5 mA 10 mA Sensitive Triac TO-252 D-PAK Lxx06R6 X X 5mA 10mA Sensitive Triac TO-220R Lxx06V6 X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK Lxx06L8 X X 10 mA 20 mA Sensitive Triac TO-220L Lxx06D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK Lxx06R8 X X 10mA 20mA Sensitive Triac TO-220R 20 mA Lxx06V8 X X 10 mA Sensitive Triac TO-251 V-PAK Qxx06VH3 X X 10 mA Alternistor Triac TO-251 V-PAK Qxx06DH3 X X 10 mA Alternistor Triac TO-252 D-PAK Qxx06L4 X 25 mA Standard Triac TO-220L Qxx06R4 X 25 mA Standard Triac TO-220R TO-263 D-PAK Qxx06N4 X 25 mA Standard Triac Qxx06LH3 X X 10mA Alternistor Triac TO-220L Qxx06RH3 X X 10mA Alternistor Triac TO-220R Qxx06LH4 X X X X 35 mA Alternistor Triac TO-220L Qxx06RH4 X X X X 35 mA Alternistor Triac TO-220R Qxx06VH4 X X X X 35 mA Alternistor Triac TO-251 V-PAK Qxx06DH4 X X X X 35 mA Alternistor Triac TO-252 D-PAK Qxx06NH4 X TO-263 D-PAK X X X 35 mA Alternistor Triac Qxx06L5 X X X 50 mA Standard Triac TO-220L Qxx06R5 X X X 50 mA Standard Triac TO-220R Qxx06N5 X X X 50 mA Standard Triac TO-263 D-PAK Packing Options Part Number Marking Weight Packing Mode Base Quantity Lxx06L/RyTP Lxx06L/Ry 2.2 g Tube Pack 500 (50 per tube) Lxx06DyTP Lxx06Dy 0.3 g Tube 750 (75 per tube) Lxx06DyRP Lxx06Dy 0.3 g Embossed Carrier 2500 Lxx06VyTP Lxx06Vy 0.4 g Tube 750 (75 per tube) Qxx06L/RyyTP Qxx06L/Ryy 2.2 g Tube Pack 500 (50 per tube) Qxx06NyyTP Qxx06Nyy 1.6 g Tube 500 (50 per tube) Qxx06NyyRP Qxx06Nyy 1.6 g Embossed Carrier 500 Qxx06DyyTP Qxx06Dyy 0.3 g Tube 750 (75 per tube) Qxx06DyyRP Qxx06Dyy 0.3 g Embossed Carrier 2500 Qxx06VyyTP Qxx06Vyy 0.4 g Tube 750 (75 per tube) Note: xx = voltage/10; yy = sensitivity (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards * Cover tape 0.315 (8.0) MT1 XXXXXX DC 0.059 DIA (1.5) XX DC XX XXXXXX * DC 0.524 (13.3) XX 0.63 (16.0) XXXXXX Gate XXXXXX 0.157 (4.0) MT2 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 0.64 (16.3) Direction of Feed TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Gate MT1 * * Cover tape MT2 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Part Numbering System Part Marking System Q 60 06 L H4 56 TO-251AA- (V Package) TO-252AA- (D Package) COMPONENT TYPE L : Sensitive Triac Q : Triac or Alternistor VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V CURRENT 06: 6A PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2PAK) V : TO-251 (VPAK) D : TO-252 (DPAK) LEAD FORM DIMENSIONS xx : Lead Form Option SENSITIVITY & TYPE Sensitive Triac: 3 : 3 mA (QI, II, III, IV) 5 : 5 mA (QI, II, III, IV) 6 : 5 mA (QI, II, III) 10 mA (QIV) 8 : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac: 4 : 25 mA (QI, II, III) 5 : 50 mA (QI, II, III) Alternistor Triac: H3 : 10 mA (QI, II, III) H4 : 35 mA (QI, II, III) L6006V5 YMLDD L6006V5 (R) YMLDD (R) Date Code Marking Y:Year Code M: Month Code L: Location Code DD: Calendar Code TO-220 AB - (L and R Package) TO-263 AB - (N Package) (R) Q6006R5 YM (R) Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code (R) (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/29/18 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: Q4006DH3 Q2025L6 Q4040K7 Q4006VH4 Q2008LH4 Q8008DH3 Q4008DH4 Q6004V4 Q6008DH4 Q6008DH3 Q4008DH3 Q2025R6 Q8006DH4 Q8006DH3 Q6008VH3 Q4006LT Q6006LT Q4006VH3 Q6006LTH Q4006LTH Q8008VH3 Q2040K7 Q4006DH4 Q6006VH3 Q2006VH4 Q6006DH3 QK006VH4 Q2006RH4 Q2006VH3 Q8006VH3 Q2010LH5 Q2006LH4 Q8006N5TP QK006N5TP QK006N5RP Q8006N5RP Q6006N5RP Q4006VH3TP Q6006VH3TP L6006D5RP L4006D5RP L4006D5TP L6006D5TP Q2006VH3TP Q2006N4RP Q4006N4RP Q4006N4TP Q6006DH3RP Q6006DH3TP Q2006DH3TP Q2006DH3RP Q4006DH3RP Q4006DH3TP L4006V5TP L6006V5TP Q2006VH4TP L4006D8TP L6006D8TP L6006D8RP L4006D8RP Q2025NH6TP Q4006DH4RP Q4006DH4TP QK006NH4TP QK006NH4RP L6006D6TP L4006D6TP L4006D6RP L6006D6RP Q8006RH4TP QK006VH4TP Q8006VH4TP Q8006DH4TP Q8006DH4RP Q6006LH4TP Q2008DH4TP Q2008DH4RP Q4006VH4TP Q6006VH4TP Q6006DH4TP Q6006DH4RP Q2006DH4RP Q2006DH4TP L6006V6TP L4006V6TP Q8006NH4TP Q8006NH4RP Q4006NH4TP Q4006NH4RP Q6006NH4TP Q6006NH4RP L4006V8TP L6006V8TP Q2008VH3TP Q2008VH4TP Q2008DH3TP Q2025L6_ Q4025J6_ Q6025K6_ Q6040K7_