Amphenol Pcd (Follow Amphenol Pcd to keep up with our Connecting Solutions) Products Backshells Cable Solutions Circular Field Bus Junction Modules Luminus Series Military Audio/Power Military Commercial Aerospace Rectangular Industrial Relay Sockets SIM System Attachments Amphenol Pcd, a subsidiary of Amphenol Corporation, is one of the world's leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly, Massachusetts, the company designs and manufactures a wide range of products - System Attachments, Junction Modules, Relay Sockets, Terminal Blocks, Rectangular & Circular connectors, and Cable Assemblies & Adapters. Each product is made and engineered with the highest quality standards in the industry. With facilities in North America and Asia, Amphenol Pcd products are chosen by hundreds of OEMs around the world, reliant on Amphenol's technical excellence, global network of distributors, and cost-effective solutions for custom systems. Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 Terminal Blocks Waterproof Solutions 72 Cherry Hill Drive, Beverly, MA 01915 1 Markets and Applications The primary markets served by Amphenol Pcd are Commercial Aerospace, Military Aerospace, Military Ground Vehicles, Communication/C4ISR, Rail Mass Transit, and Industrial. These markets have different interconnect and system configuration demands, but are closely linked by an absolute requirement for the very highest levels of reliability and performance under challenging conditions. Connectors must meet rigid military / aerospace and customer specifications, including electrical, mechanical, environmental, chemical shock / vibration performance, and configuration. Please contact Amphenol Pcd for requirements ranging from standard products to complete customized systems. Commercial Aerospace-Avionics Market and Applications: Avionics controls and instrumentation, in-flight entertainment systems, aircraft power distribution, lighting, control systems, galleys and more. All designed to reduce weight and simplify installation / maintenance procedures. Amphenol Pcd Products: Junction Modules, Relay Sockets, Luminus Series, In-Line Junctions, High Performance Clamps, Field Series Connectors, Rectangular Connectors, Modular Rectangular Connectors, In-Line Splices, Electronic Modules, Push-Pull Mini Connectors and Contacts. Commercial Aerospace-Airframe Market and Applications: Airframe power distribution, wire bundle and cable management, hydraulic tubing applications, lighting applications, fuel tank applications. All designed to reduce weight and simplify installation / maintenance procedures; (LEAN Manufacturing). Amphenol Pcd Products: Junction Modules, Relay Sockets, Luminus Series, In-Line Junctions, System Attachments, High Performance Clamps, Field Series Connectors, Rectangular Connectors, Modular Rectangular Connectors, In-Line Splices, Electronic Modules, and Contacts. Military Aerospace Market and Applications: Avionics controls and instrumentation, aircraft power distribution, lighting, control systems, galleys, pipe and cable management, weapon systems, and more. All designed to reduce weight and simplify installation / maintenance procedures. Amphenol Pcd Products: Junction Modules, Relay Sockets, In-Line Junctions, System Attachments, High Performance Clamps, Field Series Connectors, SIM Connectors, In-Line Splices, Electronic Modules, Backplane Connectors, and Contacts. Military Ground Vehicles Market and Applications: Fighting vehicles, tanks, shelters, armored personnel carriers, artillery. Off-road, heavy earthmoving equipment. Extremely harsh environmental conditions. Heavy shock and vibration, and dust exposure. Amphenol Pcd Products: Push-Pull Rectangular Power Connectors, Flex Power Bar Mounting Plates, MIL-DTL-38999 Series III Connectors, Power Bus Bars, Field Series Connectors, SIM Connectors, High Performance Clamps, Power Distribution Systems, and Sealed Junctions. Military Communication-C4ISR Market and Applications: Combat vests - worn by individual soldiers containing electronic communications provisions within active webbing embedded in vest and connected to the military communication system. Amphenol Pcd Products: Battlefield Interconnect Assemblies, Push-Pull Mini Connectors, Field Series Connectors, Sealed Miniature Connectors, and SIM Connectors. Industrial & Rail Mass Transit Market and Applications: Factory Automation, Manufacturing Communications, Earth Moving Equipment Space, Offshore Oil Platforms, High speed railway, Freight and passenger railway, Subway and Metro, Railway controls and instrumentation, and Railway communications system. Amphenol Pcd Products: Printed Circuit Board Terminal Blocks, Terminal Blocks, Interface Modules, Custom I/O Connectors, Field Series Connectors, Junction Modules, Relay Sockets, Luminus Series, In-Line Junctions, System Attachments and Electronic Modules. 2 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Manufacturing Technology and Capabilities Amphenol Pcd is a leading manufacturer of interconnect products and accessories and has the manufacturing capability along with technical expertise to provide customers with the most innovative and reliable products on the market. Amphenol Pcd has five divisions around the world with engineering and production capability in Boston, Los Angeles, Shenzhen, Montreal, and Saigon. These facilities allow Amphenol Pcd to have round the clock engineering support, high volume manufacturing capabilities, and low cost resources. Amphenol Pcd also represents Amphenol India, the European Amphenol divisions of Amphenol Socapex, Amphenol Air LB France, Amphenol Air LB Germany, and Amphenol Limited in the North and South American market. Quality Assurance Amphenol Pcd has a strong focus on quality, and to show for it, Amphenol Pcd has been awarded both the AS9100-C:2009 and ISO 9001:2008 quality assurance certificates. The AS9100-C:2009 is a quality standard that stems from the ISO and adds additionally stringent requirements aimed at the military and commercial aerospace industry. Amphenol Pcd - Beverly, Massachusetts, USA Amphenol Pcd, a subsidiary of Amphenol Corporation, is one of the world's leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly, Massachusetts, the company designs and manufactures a wide range of products System Attachments, Junction Modules, Relay Sockets, Terminal Blocks, Rectangular & Circular connectors, and Cable Assemblies. Each product is made and engineered with the highest quality standards in the industry. With facilities in North America and Asia, Amphenol Pcd products are chosen by hundreds of OEMs around the world, reliant on Amphenol's technical excellence, global network of distributors, and cost-effective solutions for custom systems. Amphenol Pcd 72 Cherry Hill Drive Beverly, MA 01915 Phone: +1 (978) 624-3400 www.amphenolpcd.com Amphenol Pcd China - Shenzhen, China Amphenol Pcd China is Amphenol Pcd's sister division in Shenzhen, China. The facility has a large manufacturing and production floor and has expertise Amphenol Pcd Shenzhen Building 21, 1st Liao Keng Industrial Zone, Shi Yan Street Bao An District Shenzhen, China 518108 Phone: +86 755-81738000 www.amphenolpcd.com.cn Amphenol Air LB NA - Montreal, Quebec, Canada Amphenol Air LB North America is Amphenol Pcd's sister division in Quebec, Canada. This division is the main design and engineering location for Amphenol Pcd's System Attachment product line. Amphenol Air LB North America 3600, Boulevard Matte, Suite J Brossard, Quebec, J4Y 2Z2, Canada Phone: +1 (450) 444-1266 www.amphenolpcd.com Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 3 Table of Contents (Go directly to your desired product by clicking on Category or Page Number) MIL-PRF-12883 Relay Sockets 6 Relay Socket Introduction ............................................................................................... 7 Military Qualified, QPL Listed Conversion Chart ................................................................... 8-9 Relay Socket Cross Reference Chart ................................................................................. Relay Sockets: MIL-PRF-12883/40 .......................................................................................... 10-11 MIL-PRF-12883/41 .......................................................................................... 12-13 14 MIL-PRF-12883/44 .......................................................................................... 15-16 MIL-PRF-12883/45 .......................................................................................... 17 MIL-PRF-12883/46 .......................................................................................... 18 MIL-PRF-12883/47 .......................................................................................... 19 MIL-PRF-12883/48 .......................................................................................... 20 MIL-PRF-12883/52, /53 .................................................................................... 21 MIPRF-12883/54 ............................................................................................. 22 MIL-PRF-12883/55 .......................................................................................... 23 Microminiature ................................................................................................ 24 MIL-PRF-12883 Board Mount ............................................................................. Non-Environmental Solder Termination................................................................... 25 Relay Socket Mounting Instructions ................................................................................... 26 Quick-Mount Relay Sockets Quick Mount Relay Socket Introduction .............................................................................. Quick Mount Relay Sockets: JRS 1 Pole / 25 Amp ........................................................................................ JRS 2 Pole / 10 Amp ........................................................................................ JRS 3 Pole / 25 Amp ........................................................................................ JRS 4 Pole / 10 Amp ........................................................................................ JRE 2 Pole / 5 Amp ......................................................................................... JRE 4 Pole / 5 Amp ......................................................................................... 27 28 29 30 31 32 33 MIL-T-81714 Series I Terminal Junction Modules 34 MIL-T-81714 Series I Terminal Junction Module Introduction ................................................... 35 General Table of Contents .............................................................................................. Series I Terminal Junction Modules: MIL-T-81714/1, /6 ............................................................................................ 36 MIL-T-81714/2, /7 ........................................................................................... 37 MIL-T-81714/3, /8 ............................................................................................ 38 MIL-T-81714/4, /9 ............................................................................................ 39 MIL-T-81714/17 .............................................................................................. 40 MIL-T-81714/27, Compatible............................................................................... 41 MIL-T-81714/25, ( /26 Compatible) ...................................................................... 42-44 Series I Terminal Junction Splices: MIL-T-81714/11, /12, (/24 Compatible) .................................................................. 45 M81714/21, /23 (& /21 Compatible) ...................................................................... 46 MIL-T-81714/23, (/24 Compatible) Series I Electronic ............................................... 47 MIL-T-81714/24 Compatible Series I Electronic ...................................................... 48-50 MIL-T-81714/5, /10, /16, (/29 Compatible) Series I Mounting Tracks Terminal Junction Modules........ 51 MIL-T-81714 Series II Socket Junction Modules MIL-T-81714 Series II Socket Junction Module Introduction .................................................... General Table of Contents .............................................................................................. Series II Socket Junction Modules: MIL-T-81714/60-22 .......................................................................................... MIL-T-81714/60-20 .......................................................................................... 4 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 52 53 54 55 Amphenol Pcd Table of Contents (Go directly to your desired product by clicking on Category or Page Number) MIL-T-81714 Series II Socket Junction Modules (Con.) MIL-T-81714/60-16 .......................................................................................... 56 MIL-T-81714/60-12 .......................................................................................... 57 MIL-T-81714/61 Distribution ............................................................................... 58 MIL-T-81714/63 Stud Mount .............................................................................. 59 MIL-T-81714/63 Flange Mount ............................................................................ 60 MIL-T-81714/62, Compatible, Board Mount ........................................................... 61 MIL-T-81714/62, Compatible, Electronic ................................................................ 62-63 MIL-T-81714/65 SJS Single & Double Sealed In-Line Splices ..................................... 64 MIL-T-81714/67 Mounting Tracks ........................................................................ 65 MIL-T-81714/67, Compatible, Composite Mounting Tracks ......................................... 66 Ground Blocks ............................................................................................................ 67 Luminus Series Luminus Series Introduction ............................................................................................ 68 Twist and Lock ............................................................................................................ 69-70 Push and Pull .............................................................................................................. 71 Contacts & Accessories ................................................................................................ 72 MIL-C-39029 Contacts MIL-C-39029/5, MIL-C-39029/101 .................................................................................... MIL-C-39029/1, MIL-C39029/22 ...................................................................................... MIL-C-39029/92 .......................................................................................................... 73 74 75 System Attachments System Attachments Introduction ...................................................................................... 76 High Performance P-Clamps ........................................................................................... 77 High Performance Omega Clamps .................................................................................... 78 LDG P-Clamps ............................................................................................................ 79-80 C-Clamps ................................................................................................................... 81 High Performance Standoffs ............................................................................................ 82 Fairlead Blocks ............................................................................................................ 83 Stringer and Frame Clips ............................................................................................... 84 Supports & Strips ......................................................................................................... 85 Jig Board Clamps ......................................................................................................... 86 Customization .............................................................................................................. 87 Galley Connectors ApeX Galley Connector, Rectangular ................................................................................ 88-91 ApeX Galley Connector, Circular ...................................................................................... 92-94 Cable Solutions Cable Solutions Introduction / Applications ......................................................................... 95 AN/PRC 117G Manpack Radio ........................................................................................ 96-97 AN/PRC 117G Wideband Tactical / Radio .......................................................................... 98-99 AN/PRC 152 Handheld Radio ......................................................................................... 100-101 Amphenol Divisions Amphenol Pcd, Shenzhen .............................................................................................. Amphenol Germany ...................................................................................................... Amphenol Socapex ...................................................................................................... Amphenol Air LB France ................................................................................................ Amphenol Limited ........................................................................................................ Amphenol Interconnect India .......................................................................................... Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 102-104 105 106-108 109-112 113-115 116-117 72 Cherry Hill Drive, Beverly, MA 01915 5 Relay Sockets MIL-PRF-12883 Amphenol Pcd offers the industry's broadest line of pluggable relay sockets for commercial and military airborne, ground and shipboard equipment. Sockets are made to MIL-PRF-12883 specifications, plus specialized requirements, and are supplied in a broad range of military standard and special configurations and styles for 2 through 25 amp operations. Amphenol Pcd Relay Sockets feature state-of-the-art ultrasonically bonded interfaces between the dielectric components, which eliminate air paths and provide protection against moisture and degradation. Low Profile Relay Sockets Extended Height Relay Sockets Microminiature Relay Sockets Board Mount Relay Sockets Track Mount Relay Sockets Solder Termination Relay Sockets Socket Variations Low Profile Low Profile Relay Sockets are provided in all military configurations, are configured to a minimum size and weight, and accept the MIL-C-39029/92 contact family. Extended Height Extended Height Sockets are configured to accept the longer MIL-C-39029/5 contact - which is standard on many cylindrical connectors and other avionic interconnect systems - and allow contact standardization. Mounting Hardware Sockets are available with either fixed or loose mounting studs. Studs and hardware supplied with standard Amphenol Pcd QPL-listed sockets are cold rolled steel. Stainless steel is available as an alternate. To specify stainless steel, an "S" is added to both the QPL number and the Amphenol Pcd catalog number. Mounting Style Relay sockets can be top or bottom mounted. See page 26 for mounting instructions. Polarization Relay-to-socket positive polarization is provided by specific contact configurations and/or polarizing pins, in accordance with MIL-Spec requirements. Contacts Closed entry socket contacts qualified to MIL-C-39029 are used and supplied with Amphenol Pcd Relay Sockets. Note: Relay Socket catalog numbers include the appropriate number of contacts as defined in the applicable military specification. 6 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd Military Qualified, QPL Listed Relay Socket Part Numbers Military Socket P/N Amphenol Pcd Socket P/N Page Military Socket P/N M12883/40-01 M12883/40-02 M12883/40-03 M12883/40-04 M12883/40-05 M12883/40-06 M12883/40-07 M12883/40-08 M12883/40-09 M12883/40-10 M12883/40-11 M12883/40-12 M12883/40-13 M12883/40-14 M12883/40-15 M12883/40-16 M12883/40-17 M12883/40-18 M12883/40-19 M12883/40-20 M12883/40-21 M12883/40-22 M12883/40-23 M12883/40-24 M12883/41-01 M12883/41-02 M12883/41-03 M12883/41-04 M12883/41-05 M12883/41-06 M12883/41-07 M12883/41-08 M12883/41-09 M12883/41-10 M12883/41-11 M12883/41-12 M12883/41-13 M12883/41-14 M12883/41-15 M12883/41-16 M12883/41-17 M12883/41-18 M12883/41-19 RSL116079 RSL116081 RSL116083 RSL116085 RSL116087 RSL116089 RSL116051 RSL116053 RSL116055 RSL116057 RSL116059 RSL116061 RSE116661 RSE116663 RSE116665 RSE116667 RSE116669 RSE116671 RSE116673 RSE116675 RSE116677 RSE116679 RSE116681 RSE116683 RSL116091 RSL116093 RSL116095 RSL116097 RSL116099 RSL116063 RSL116065 RSL116067 RSL116069 RSL116071 RSE116685 RSE116687 RSE116689 RSE116691 RSE116693 RSE116695 RSE116697 RSE116699 RSE116701 10 10 10 10 10 10 10 10 10 10 10 10 11 11 11 11 11 11 11 11 11 11 11 11 12 12 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 13 13 M12883/41-20 M12883/44-01 M12883/44-02 M12883/44-03 M12883/44-04 M12883/45-01 M12883/45-02 M12883/45-03 M12883/45-04 M12883/45-05 M12883/45-06 M12883/46-01 M12883/46-02 M12883/46-03 M12883/46-04 M12883/47-01 M12883/47-02 M12883/47-04 M12883/47-05 M12883/47-07 M12883/47-08 M12883/47-10 M12883/47-11 M12883/48-01 M12883/48-02 M12883/48-03 M12883/48-04 M12883/48-05 M12883/48-06 M12883/48-07 M12883/48-08 M12883/52-001 M12883/52-002 M12883/52-003 M12883/53-001 M12883/54-01 M12883/54-02 M12883/54-03 M12883/54-04 M12883/55-01 M12883/55-02 M12883/55-03 Amphenol Pcd Socket P/N RSE116703 RSE120151 RSE120153 RSE120155 RSE120157 RSE120159 RSE120161 RSE120163 RSE120165 RSE120167 RSE120169 RSE116747 RSE116749 RSE116751 RSE116753 RSE116755 RSE116757 RSE116761 RSE116763 RSL116101 RSL116103 RSL116073 RSL116075 RSE112061 RSE112063 RSL112105 RSL112101 RSE112065 RSE112067 RSL112107 RSL112103 RSE116175 RSE116185 RSE116195 RST145005 RSE116627 RSE116631 RSE116629 RSE116635 RSE112035 RSE112036 RSE112044 Page 13 14 14 14 14 15 15 15 16 16 16 17 17 17 17 18 18 18 18 18 18 18 18 19 19 19 19 19 19 19 19 20 20 20 20 21 21 21 21 22 22 22 Stainless Steel Hardware To specify Relay Sockets with Stainless Steel hardware, the suffix "S" is added to both the military and Aphenol Pcd part numbers. For example, M12883/40-01 becomes M12883/40-01S, and the Amphenol Pcd equivalent RSL116079 becomes RSL116079-S. Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 7 Relay Socket Cross Reference Chart Relay to Relay Socket Military Relay P/N Military Socket P/N APCD Socket P/N Relay Type Page M83536/15-002 M83536/16-006, -014, -031, -034 M83726/1, /2, /3, /4, /28, /29, /30, /31* MS27709-2 M12883/40-01 M12883/40-05 M12883/40-07 M12883/40-11 M12883/40-13 M12883/40-17 M12883/40-19 M12883/40-23 RSL116079 RSL116087 RSL116051 RSL116059 RSE116661 RSE116669 RSE116673 RSE116681 4 Pole / 10 Amp 10-11 M83536/17-002, 17-005 M12883/40-02 M12883/40-08 M12883/40-14 M12883/40-20 RSL116081 RSL116053 RSE116663 RSE116675 4 Pole / 10 Amp 10-11 M83536/18-002, -005, -008, -012 M83536/19-002, -005, -008, -012 M83536/20-002 M12883/40-06 M12883/40-12 M12883/40-18 M12883/40-24 RSL116089 RSL116061 RSL116671 RSE116683 4 Pole / 10 Amp 10-11 M12883/46-01 RSE116747 3 Pole / 10 Amp 17 M83536/25-002 M83536/26-002 M12883/47-01 M12883/47-04 M12883/47-07 M12883/47-10 RSE116755 RSE116761 RSL116101 RSL116073 6 Pole / 10 Amp 18 M6106/27-002 M12883/47-02 M12883/47-05 M12883/47-08 M12883/47-11 RSE116757 RSE116763 RSL116103 RSL116075 6 Pole / 10 Amp 18 MS27742-2 M12883/54-04 RSE116635 3 Pole / 25 Amp 21 MS27743-06, -12, -18, -24 M12883/48-01 M12883/48-02 M12883/48-03 M12883/48-04 RSE112061 RSE112063 RSL112105 RSL112101 3 Pole / 25 Amp 19 MS27743-09, -15, -21, -27 M12883/48-05 M12883/48-06 M12883/48-07 M12883/48-08 RSE112065 RSE112067 RSL112107 RSL112103 3 Pole / 25 Amp 19 Leach Corp. JA-D4E & J M12883/41-03 M12883/41-08 M12883/41-13 M12883/41-18 RSL116095 RSL116067 RSE116689 RSE116699 2 Pole / 10 Amp 12-13 Leach Corp. KA-D4E & J M12883/40-04 M12883/40-10 M12883/40-16 M12883/40-22 RSL116085 RSL116057 RSE116667 RSE116679 4 Pole / 10 Amp 10-11 M83536/21-006, -014, -022, -030 M83536/22-006, -014, -022, -031 Note: M12883 Relay Sockets are compatible with plug-in or socket pin relays in the specified documents 8 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd Relay Socket Cross Reference Chart Relay to Relay Socket Military Relay P/N Military Socket P/N APCD Socket P/N Relay Type Page M6106/12-002 M12883/54-03 RSE116629 3 Pole / 25 Amp 21 M6106/13-002,-008,-011,-013,-015 M12883/54-01 RSE116627 3 Pole / 25 Amp 21 M6106/13-004 M12883/54-02 RSE116631 3 Pole / 25 Amp 21 M6106/19-004,-007,-012,-017,-022 M12883/55-01, M12883/55-02 RSE112035, RSE112036 1 Pole / 25 Amp 22 M6106/20-002 M12883/55-03 RSE112044 1 Pole / 25 Amp 22 M6106/38-002 M12883/45-04 RSE120165 2 Pole / 5 Amp 15-16 M6106/40-002 M12883/46-02 RSE116749 3 Pole / 5 Amp 17 M83536/1-006,-015,-024,-033 M83536/2-006,-015,-024,-035 M12883/45-01 RSE120159 2 Pole / 5 Amp 15-16 M83536/2-028, M83726/24, /25 M12883/52-001 RSE116175 Track Mount 2 Pole / 5 Amp 20 M83536/5-006,-014, -022, -030 M83536/6-006, -015, -022, -032 M12883/44-01 RSE120151 4 Pole / 5 Amp 14 M83536/6-025 M12883/52-002 RSE116185 Track Mount 4 Pole / 5 Amp 20 M83536/7-022 M12883/44-02 RSE120153 4 Pole / 5 Amp 14 M83536/9, -006, -015, -024, -035 M83536/10-006,-015,-024, -034,-038 M12883/41-01 M12883/41-04 M12883/41-06 M12883/41-09 M12883/41-11 M12883/41-14 M12883/41-16 M12883/41-19 RSL116091 RSL116097 RSL116063 RSL116069 RSE116685 RSE116691 RSE116695 RSE116701 2 Pole / 10 Amp 12-13 M83536/11-002, 004, 007 M12883/41-02 M12883/41-07 M12883/41-12 M12883/41-17 RSL116093 RSL116065 RSE116687 RSE116697 2 Pole / 10 Amp 12-13 M83536/13-002, 005, 008, 012 M83536/14-002 M12883/41-05 M12883/41-10 M12883/41-15 M12883/41-20 RSL116099 RSL116071 RSE116693 RSE116703 2 Pole / 10 Amp 12-13 Note: M12883 Relay Sockets are compatible with plug-in or socket pin relays in the specified documents Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 9 MIL-PRF-12883/40 Extended Height RSL 4 Pole/10 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Stainless Steel, Hard Gold Plated in Accordance with SAE-AMS-2422 Mates with M83536, M6106, M27709, M83726 Relays Relay Socket Dimensions Top View Side View O.078 POLARIZING HOLE .335 MIN DEEP CONFIG. E SHOWN .200 TYP. .290 .245 .140- .135 1.080 1.020 .100 .318 1.015 MAX .220 .625 .200 TYP .350 .270 1.406 1.085 MAX BLUE STRIPE 1.74 MAX Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .190 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW A C B 1.130 MAX .05 R 4 PL 1.035 .625 .517 .312 1.110 1.406 E D .148 Extended Height Relay Sockets MIL P/N M12883 1 APCD P/N Mounting Stud QTY Size1 Contact P/N Weight Config. Mating Relay A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,30,31*, M27709-02 M83536/17-002,-005 /40-01 RSL116079 Loose 14 16/16 /5-116 /40-02 RSL116081 Loose 14 16/16 /5-116 B /40-03 RSL116083 Loose 14 16/16 /5-116 C /40-04 RSL116085 Loose 14 16/16 /5-116 D Leach Corp KA-D4E & J /40-05 RSL116087 Loose 14 16/20 /5/117 A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,31,N27709-02 /40-06 RSL116089 Loose 16 16/16 /5-116 E M83536/18-002,005,008,012 M83536/19-002,008,012, M83536/20-002 /40-07 RSL116051 Fixed 14 16/16 /5-116 A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,31,N27709-02 M83536/17-002,-005 /40-08 RSL116053 Fixed 14 16/16 /5-116 B /40-09 RSL116055 Fixed 14 16/16 /5-116 C /40-10 RSL116057 Fixed 14 16/16 /5-116 D Leach Corp KA-D4E & J /40-11 RSL116059 Fixed 14 16/20 /5/117 A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,31,M27709-02 /40-12 RSL116061 Fixed 16 16/16 /5-116 E M83536/18-002,-005,-008,-012 M83536/19-002,-008,-012, M83536/20-002 Mating End/ Wire Barrel 10 2014 Amphenol Pcd Pounds Grams .132 60 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-PRF-12883/40 Low Profile RSL 4 Pole/10 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Mates with M83536, M6106, M27709, M83726 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Stainless Steel, Hard Gold Plated in Accordance with SAE-AMS-2422 Relay Socket Dimensions Top View Side View O.078 POLARIZING HOLE .335 MIN DEEP CONFIG. E SHOWN .200 TYP. .290 .245 .100 1.080 1.020 .093 .290 1.015 MAX .220 .625 .890 MAX .200 TYP .350 .270 1.406 1.74 MAX 1.085 MAX Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .190 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW A C B BLUE STRIPE .05 R 4 PL 1.035 .625 .517 .312 1.110 1.406 E D .148 Low Profile Relay Sockets MIL P/N M12883 APCD P/N Mounting Stud QTY Size1 Contact P/N Config. Mating Relay Weight /40-13 RSE116661 Loose 14 16/16 /92-533 A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,30,31*, M27709-02 /40-14 RSE116663 Loose 14 16/16 /92-533 B M83536/17-002,-005 /40-15 RSE116665 Loose 14 16/16 /92-533 C /40-16 RSE116667 Loose 14 16/16 /92-533 D Leach Corp KA-D4E & J /40-17 RSE116669 Loose 14 16/20 /92-534 A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,31,N27709-02 /40-18 RSE116671 Loose 16 16/16 /92-533 E M83536/18-002,005,008,012 M83536/19-002,008,012, M83536/20-002 /40-19 RSE116673 Fixed 14 16/16 /92-533 A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,31,N27709-02 /40-20 RSE116675 Fixed 14 16/16 /92-533 B M83536/17-002,-005 /40-21 RSE116677 Fixed 14 16/16 /92-533 C /40-22 RSE116679 Fixed 14 16/16 /92-533 D Leach Corp KA-D4E & J /40-23 RSE116681 Fixed 14 16/20 /92-534 A M83536/15-022, M83536/16-006,-014,-031,-034 M83726/1,2,3,4,28,29,31,M27709-02 /40-24 RSE116683 Fixed 16 16/16 /92-533 E M83536/18-002,-005,-008,-012 M83536/19-002,-008,-012, M83536/20-002 Mating End/ Wire Barrel *Applies to all plug-in type relays of these documents 1 Amphenol Pcd 2014 Amphenol Pcd Pounds Grams .100 45 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 11 MIL-PRF-12883/41 Extended Height RSL 2 Pole/10 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Stainless Steel, Hard Gold Plated in Accordance with SAE-AMS-2422 Mates with M83536, M6106 Relays Relay Socket Dimensions Top View Side View LOOSE STUD STYLE O.078 X .355 MIN DP POLARIZING HOLE .290 .245 1.080 1.020 .500 .140-.135 .318 .200 TYP. .220 .100 1.130 .350 .270 .53 MAX 1.085 MAX 1.406 .200 1.74 MAX BLUE STRIPE FOR REAR RELEASE .100 FIXED STUD STYLE Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT-CLEARANCE HOLE FOR .190 SCREW TOP MOUNT - CLEARANCE HOLE FOR .112 SCREW .555 .1480 .277 A B C .05 R 4 PL 1.110 D 1.406 Extended Height Relay Sockets MIL P/N M12883 1 APCD P/N Mounting Stud QTY Size1 Contact P/N Config. /41-01 RSL116091 Loose 8 16/16 /5-116 C M83536/9-006, 015, 024, 035 M83536/10-006, 015, 024, 034, 038 /41-02 RSL116093 Loose 8 16/16 /5-116 B M83536/11-002, 004, 007 /41-03 RSL116095 Loose 8 16/16 /5-116 A Leach Corp JA-D4E & J /41-04 RSL116097 Loose 8 16/20 /5-117 C M83536/9-006, 015, 024, 035 M83536/10-006, 015, 024, 034, 038 /41-05 RSL116099 Loose 8 D M83536/12-008, /14-008 /41-06 RSL116063 Fixed /41-07 RSL116065 /41-08 16/16 /5-116 22/22 /5-TBD 8 16/16 /5-116 C M83536/9-006, 015, 024, 035 M83536/10-006, 015, 024, 034, 038 Fixed 8 16/16 /5-116 B M83536/11-002, 004, 007 RSL116067 Fixed 8 16/16 /5-116 A Leach Corp JA-D4E & J /41-09 RSL116069 Fixed 8 16/20 /5-117 C M83536/9-006, 015, 024, 035 M83536/10-006, 015, 024, 034, 038 /41-10 RSL116071 Fixed 8 16/16 /5-116 8 22/22 /5-TBD D M83536/12-008, /14-008 Mating End/ Wire Barrel 12 Weight Mating Relay 2014 Amphenol Pcd Pounds Grams .073 33 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-PRF-12883/41 Low Profile RSE 2 Pole/10 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Mates with M83536, M6106 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Relay Socket Dimensions Top View Side View O.078 X .355 MIN DP POLARIZING HOLE LOOSE STUD STYLE .290 .245 1.080 1.020 .500 .093 .290 .200 TYP. .220 .100 .890 .350 .270 .53 MAX 1.406 .200 1.74 MAX 1.085 MAX .100 FIXED STUD STYLE BLUE GROMMET OR BLUE STRIPE FOR REAR RELEASE Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT-CLEARANCE HOLE FOR .190 SCREW TOP MOUNT - CLEARANCE HOLE FOR .112 SCREW .05 R 4 PL .555 1.110 .277 A B C 1.406 D .1480 Low Profile Relay Sockets MIL P/N M12883 /41-11 1 APCD P/N RSE116685 Mounting Stud Loose QTY 8 Size1 16/16 Contact P/N Mating Relay /92-533 C M83536/9-006, 015, 024, 035 M83536/10-006, 015, 024, 034, 038 /41-12 RSE116687 Loose 8 16/16 /92-533 B M83536/11-002, 004, 007 /41-13 RSE116689 Loose 8 16/16 /92-533 A TBD /41-14 RSE116691 Loose C Leach Corp JA-D4E & J D M83536/13-002, 005, -008, -012 M83536/13-002, -005, -008, -012 8 16/16 /92-533 8 16/16 /92-533 2 22/22 /92-551 /41-15 RSE116693 Loose /41-16 RSE116695 Fixed 8 16/16 /92-533 C M83536/9-006, 015, 024, 035 M83536/10-006, 015, 024, 034, 038 /41-17 RSE116697 Fixed 8 16/16 /92-533 B M83536/11-002, 004, 007 /41-18 RSE116699 Fixed 8 16/16 /92-533 A Leach Corp JA-D4E & J C M83536/9-006, 015, 024, 035 M83536/10-006, 015, 024, 034, 038 D M83536/13-002,-005,-008,-012 M83536/13-002,-005,-008,-012 /41-19 RSE116701 Fixed /41-20 RSE116703 Fixed 8 16/20 /92-534 8 16/16 /92-553 2 22/22 /92-551 Mating End/ Wire Barrel Amphenol Pcd Weight Config. 2014 Amphenol Pcd Pounds Grams .055 25 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 13 MIL-PRF-12883/44 RSE 4 Pole/5 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1000 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Mates with M83536, M6106 Relays Relay Socket Dimensions Top View CONFIG. B SHOWN Side View .375 .150 TYP .79 .150 TYP .570 .187 .290 .250 .500 .093 .80 POLARIZING HOLE .695 MAX .280 .665 MAX .760 MAX 1.075 BLUE STRIPE FOR REAR RELEASE 1.437 MAX Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .164 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW B A .05 R 4 PL .825 .500 .412 .250 C .880 1.075 D Low Profile Relay Sockets MIL P/N M12883 1 14 APCD P/N Mounting Stud QTY Size1 Contact P/N Mating Relay A M83536/5-006,-014,-022,-030 M83536/6,-006,-014,-022,-032 M83536/7-002 /44-01 RSE120151 Fixed 14 20/20 /101-553 /44-02 RSE120153 Fixed 16 20/20 /101-553 B /44-03 RSE120155 Fixed 16 20/20 /101-553 C /44-04 RSE120157 Fixed 16 20/20 /101-553 D Pounds Grams .055 25 Mounting instructions can be found on page 26 Mating End/ Wire Barrel 2014 Amphenol Pcd Weight Config. www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-PRF-12883/45 RSE 2 Pole/5 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1000 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Mates with M83536, M6106 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE AMS-2422 Relay Socket Dimensions Top View CONFIG. A SHOWN .375 Side View .150 TYP .075 .093 .80 POLARIZING HOLE .570 .187 .290 .150 .695 MAX .280 .39 .665 MAX .760 MAX 1.075 BLUE GROMMET OR BLUE STRIPE FOR REAR RELEASE 1.437 MAX Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .164 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW .05 R 4 PL .425 .212 .880 A B 1.075 C Low Profile Relay Sockets MIL P/N M12883 1 Amphenol Pcd APCD P/N Mounting Stud QTY Size1 Contact P/N Mating Relay M83536/1-006, -015, -024, -033 M83536/2-006, -015, -024, -035 /45-01 RSE120159 Fixed 8 20/20 /101-533 A /45-02 RSE120161 Fixed 8 20/20 /101-533 B /45-03 RSE120163 Fixed 8 20/20 /101-533 C Mating End/ Wire Barrel 2014 Amphenol Pcd Weight Config. Pounds Grams .033 15 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 15 MIL-PRF-12883/45 RSE 2 Pole/5 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1000 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Mates with M6106/38 Relays Relay Socket Dimensions Top View Side View .075 CONFIG. B SHOWN POLARIZING HOLE .450 .300 .39 .570 .075 .150 .113 .80 .187 .290 .150 .695 MAX .280 .190 .665 MAX .053 .760 MAX .106 BLUE GROMMET OR BLUE STRIPE FOR REAR RELEASE 1.075 1.437 MAX Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .164 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW .05 R 4 PL .425 .212 .880 A B 1.075 C Low Profile Relay Sockets MIL P/N M12883 1 16 APCD P/N Mounting Stud /45-04 RSE120165 Fixed /45-05 RSE120167 Fixed /45-06 RSE120169 Fixed QTY Size1 Contact P/N 6 20/20 /101-553 4 20/22 /101-552 6 20/20 /101-553 4 20/22 /101-552 6 20/20 /101-553 4 20/22 /101-552 Config. Mating Relay A M6106/38-002 B Grams .033 15 C Mating End/ Wire Barrel 2014 Amphenol Pcd Weight Pounds Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-PRF-12883/46 RSE 3 Pole/10 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1250 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Mates with M83536, M6106 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Relay Socket Dimensions Top View Side View POLARIZING HOLE .400 .300 .100 .79 .500 .570 .115 .200 .230 .250 .345 .460 .093 .80 .187 .290 .695 MAX .280 .665 MAX .760 MAX .490 CONFIG. B SHOWN 1.075 1.437 MAX BLUE GROMMET OR BLUE STRIPE FOR REAR RELEASE Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .164 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW A .05 R 4 PL B .825 .500 .412 .880 .250 C 1.075 D Low Profile Relay Sockets MIL P/N M12883 Amphenol Pcd Mounting Stud /46-01 RSE116747 Fixed /46-02 RSE116749 Fixed /46-03 RSE116751 Fixed /46-04 1 APCD P/N RSE116753 Fixed QTY Size1 Contact P/N 9 16/16 /101-554 2 20/20 /101-553 9 16/16 /101-554 2 20/20 /101-553 9 16/16 /101-554 2 20/20 /101-553 9 16/16 /101-554 2 20/20 /101-553 Mating Relay A M83536/21-006,-014,-022,-030 M83536/22-006,-014,-022,-030 B M6106/40-002 Pounds Grams .055 25 C D Mating End/ Wire Barrel 2014 Amphenol Pcd Weight Config. Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 17 MIL-PRF-12883/47 RSE/RSL 6 Pole/10 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Mates with M83536, M6106 Relays Relay Socket Dimensions Top View Side View .290 .245 .200 TYP LOOSE STUD STYLE B A D .220 .200 TYP 1.500 MAX .350 .270 1.000 1.085 MAX FIXED STUD STYLE CONFIG. A SHOWN 1.437 Relay Socket Extended Height Low Profile 1.74 MAX C BLUE STRIPE FOR REAR RELEASE A 1.03 1.08 B .140-.135 .093 C Max 1.25 .890 D .318 .290 Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .190 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW .500 1.600 1.000 A B 1.11 .05 R 4 PL 1.437 Low Profile Relay Sockets Weight MIL P/N M12883 APCD P/N Mounting Stud QTY Size1 Contact P/N Config. Mating Relay /47-01 RSE116755 Loose 20 16/16 /92-533 A M83536/25-002, M83536/26-002 /47-02 RSE116757 Loose 20 16/16 /92-535 B M83536/27-002 /47-04 RSE116761 Fixed 20 16/16 /92-533 A M83536/25-002, M83536/26-002 /47-05 RSE116763 Fixed 20 16/16 /92-533 B M83536/27-002 Pounds Grams .144 65 Extended Height Relay Sockets 1 APCD P/N Mounting Stud QTY Size1 Contact P/N Config. Mating Relay /47-07 RSL116101 Loose 20 16/16 /5-116 A M83536/25-002, M83536/26-002 /47-08 RSL116103 Loose 20 16/16 /5-116 B M83536/27-002 /47-10 RSL116073 Fixed 20 16/16 /5-116 A M83536/25-002, M83536/26-002 /47-11 RSL116075 Fixed 20 16/16 /5-116 B M83536/27-002 Mating End/ Wire Barrel 18 Weight MIL P/N M12883 2014 Amphenol Pcd Pounds Grams .176 80 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-PRF-12883/48 RSE/RSL 3 Pole/25 Amp Operating Range Materials Temperature: Socket Body: -65C to 125C Polyetherimide per ASTM-D5205 Insulation Resistance: Grommet: 1000 Megaohms Min. Silicone Rubber per A-A-59588 Dielectric Withstanding Hardware: Voltage: Stainless Steel or Steel w/Cadmium 1500 VRMS at Sea Level Chromate Finish 500 VRMS at 80,000 ft. Contact Retainers: Vibration: Stainless Steel MIL-STD-202, Method 204 Socket Contacts: Test Condition G Copper Alloy, Hard Gold Plated in Shock: Accordance with SAE-AMS-2422 MIL-STD-202, Method 213; Test Condition C Mates with MS27743 Relays Relay Socket Dimensions Top View Side View .290 .245 .630 .432 B D .150 TYP .234 .220 .350 .270 .312 1.015 MAX .625 LOOSE STUD STYLE A 1.085 MAX FIXED STUD STYLE 1.406 Relay Socket Extended Height Low Profile 1.74 MAX C A 1.03 1.00 BLUE GROMMET OR BLUE STRIPE FOR REAR RELEASE B .140-.135 .093 D .318 .290 C Max 1.25 .890 Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT CLEARANCE HOLE FOR .190 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW .05 R 4 PL .625 .312 1.100 1.160 A B .550 1.406 Low Profile Relay Sockets MIL P/N M12883 /48-01 /48-02 /48-05 /48-06 APCD P/N RSE112061 RSE112063 RSE112065 RSE112067 Mounting Stud Loose Fixed Loose Fixed Weight QTY Size1 Contact P/N Config. Mating Relay 2 16/16 /92-533 A MS27743-06, -12, -18, -24 9 12/12 /92-535 A MS27743-06, -12, -18, -24 2 16/16 /92-533 A MS27743-09, -15, -21, -27 9 12/12 /92-535 A MS27743-09, -15, -21, -27 2 16/16 /92-533 B MS27743-06, -12, -18, -24 9 12/12 /92-535 B MS27743-06, -12, -18, -24 2 16/16 /92-533 B MS27743-09, -15, -21, -27 9 12/12 /92-535 B MS27743-09, -15, -21, -27 Pounds Grams .109 49 Extended Height Relay Sockets MIL P/N M12883 /48-03 /48-04 /48-07 /48-08 1 Amphenol Pcd APCD P/N RSL112105 RSL112101 RSL112107 RSL112103 Mounting Stud Loose Fixed Loose Fixed Size1 Contact P/N Config. Mating Relay 2 16/16 /5-116 A MS27743-06, -12, -18, -24 9 12/12 /5-118 A MS27743-06, -12, -18, -24 2 16/16 /5-116 A MS27743-09, -15, -21, -27 9 12/12 /5-118 A MS27743-09, -15, -21, -27 2 16/16 /5-116 B MS27743-06, -12, -18, -24 9 12/12 /5-118 B MS27743-06, -12, -18, -24 2 16/16 /5-116 B MS27743-09, -15, -21, -27 9 12/12 /5-118 B MS27743-09, -15, -21, -27 Mating End/ Wire Barrel 2014 Amphenol Pcd Weight QTY Pounds Grams .129 55 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 19 MIL-PRF-12883/52, MIL PRF-12883/53 RSE Track Mount 2, 3 & 4 Pole & Mounting Track Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 700 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Beryllium Copper Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Mates with MS83726, M83536 & M6106 Relays Socket Dimensions M12883/53-001 Mounting Track Dimensions Track Dimensions 2X LATCH STRIP BLACK MARKING .06 HT 1.060 MAX ACROSS RIVETS .810 MAX 1.625 M DATE CODE 4X .46.03 .375 Track Materials INNER BRACKET .150 TYP Outer Track: Aluminum Alloy per QQ-A-225 Chemical Coating per MIL-C-5541, Class 3 Inner Brackets and Rivets: Stainless Steel per QQ-S-766, Passivated Latch: Beryllium copper #172 per QQ-C-533 Bright Finish Wiring Protector: Aramid Paper per MIL-I-24202 Track Operating Range: -65C to 125C .390 1.720 .015 FRAME .150 TYP RST145005 lbs. Grams .053 24 .790 .150 TYP Track Weight WIRING PROTECTOR A .150 TYP 8X RIVET .065 TYP POLARIZING HOL .200 TYP B .100 TYP .230 TYP .790 .81 C .115 TYP .945 Use tool M6106/32-001 to remove M1288/52 sockets. Use tool M6106/31-001 to remove relays from this mounting bracket. .770 MAX Low Profile Relay Sockets MIL P/N M12883* APCD P/N QTY Size1 Contact P/N Config. Mating Relay /52-001 RSE116175 8 20/20 /101-553 A M83536/2-028, M83726/27, /25 /52-002 RSE116185 14 20/20 /101-533 B M83536/6-025 /52-003 RSE116195 9 16/16 /101-554 2 20/20 /101-553 C M83536/22-025 Mating End/ Wire Barrel *These relay sockets are used in track mount system with track M12883/53-001, Amphenol Pcd P/N RST145005 1 20 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com Weight Pounds Grams .016 7 .031 14 Mounting instructions can be found on page 26 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-PRF-12883/54 RSE 3 Pole/25 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Mates with M6106/12, /13 & MS27742 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Relay Socket Dimensions Top View CONFIG. A SHOWN Side View .630 .290 .245 .432 .234 .117 1.015 MAX .625 .093 1.00 .150 .220 .290 .890 MAX .300 .312 .295 .265 1.00 MAX 1.406 BLUE STRIPE FOR REAR RELEASE 1.74 MAX DIA .078 X .355/.380 DP POLARIZING HOLE Recommended Mounting Panel Cutout Socket Configurations A BOTTOM MOUNT CLEARANCE HOLE FOR .190 SCREW TOP MOUNT CLEARANCE HOLE FOR .112 SCREW B .550 .625 C .05 R 4 PL .312 1.100 D 1.160 1.406 Low Profile Relay Sockets MIL P/N M12883 RSE116627 Fixed /54-02 RSE116631 Fixed /54-04 Amphenol Pcd Mounting Stud /54-01 /54-03 1 APCD P/N RSE116629 RSE116635 Fixed Fixed QTY Size1 Contact P/N 5 16/16 /92-533 6 12/12 /92-535 5 16/16 /92-533 6 12/12 /92-535 2 20/20 /92-532 5 16/16 /92-533 6 12/12 /92-535 2 20/20 /92-532 2 16/16 /92-535 9 12/12 /92-535 Mating Relay A M6106/13-002,-008,-011,-013,-015 B M6106/13-004 C M6106/12-002 D Pounds Grams .132 60 .154 70 MS27742-2 Mating End/ Wire Barrel 2014 Amphenol Pcd Weight Config. Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 21 MIL-PRF-12883/55 RSE 1 Pole/25 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Mates with M6106/19, 20 Relays Relay Socket Dimensions Top View Side View .290 .245 .630 .530 .234 .432 1.000 2X .100 .117 .093 .290 .220 .350 .265 1.406 2X .130 1.74 MAX 1.085 MAX BLUE STRIPE FOR REAR RELEASE CONFIG B. SHOWN Recommended Mounting Panel Cutout Socket Configurations BOTTOM MOUNT-CLEARANCE HOLE FOR .190 SCREW TOP MOUNT - CLEARANCE HOLE FOR .112 SCREW A .890 MAX .05 R 4 PL B .555 1.110 .277 1.406 .1480 Low Profile Relay Sockets MIL P/N M12883 Mounting Stud /55-01 RSE112035 Fixed /55-02 RSE112036 Fixed /55-03 1 APCD P/N RSE112044 Fixed QTY Size1 Contact P/N 2 16/16 /92-533 3 12/12 /92-535 2 16/16 /92-533 3 12/16 /92-536 2 22/22 /92-531 2 16/16 /92-533 3 12/12 /92-535 Mating Relay A M6106/19-004, -007, -012, -017, -022 A M6106/19-004, -007, -012, -017, -022 B M6106/20-002 Mating End/ Wire Barrel 22 2014 Amphenol Pcd Weight Config. Pounds Grams .073 33 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Microminiature Relay Sockets RSE 2&3 Pole, 2 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 2500 VRMS at Sea Level 700 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Mates with M39016 & M5757 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Relay Socket Dimensions RSE120020 Side View Top View .400 .200 .810 Max 1.000 1.250 .200 TYP .062 TYP .710 Max .200 RSE120074 Side View Top View .400 .200 .810 Max .200 TYP 1.300 1.062 POLARIZING HOLE .710 Max .200 RSE120070 Side View Top View .610 1.010 Max .1.200 1.430 .200 TYP .200 TYP .400 TYP .750 Max Relay Sockets for 2 Pole/2 Amp Microminiature Relays Weight APCD P/N QTY Size1 Contact P/N Config. RSE120020 8 22/20 CNS109900 A MIL-R-5757/10-022,-044 RSE120074 8 22/20 CNS109900 B MIL-R-39016/55-001,-013,-025,-037 Mating Relay Pounds Grams .024 11 Relay Sockets for 3 Pole/2 Amp Microminiature Relays 1 Amphenol Pcd APCD P/N QTY Size1 Contact P/N Config. RSE120070 14 22/20 CNS109900 C Mating Relay MIL-R-39016/39-002,-008,-014 Mating End/ Wire Barrel 2014 Amphenol Pcd Weight Pounds .044 Grams 20 Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 23 MIL-PRF-12883 Board Mount RSN 2, 4 Pole/10 Amp, 3 Pole/25 Amp Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Mates with MIL-R-6106 & MS27743 Relays Product Description Product line of pluggable, PC Board Mount Relay Sockets allows separable mounting of relays directly to boards in airborne or ground applications. Polyetherimide body and scalloped mounting flange reduce weight and improve strength. Mounting hardware supplied with connector secures firmly to board and eliminates stress on solder contacts. Gold-plated contacts and solder-dipped contact tails are available. Relay Socket Dimensions RSN116140 Side View Top View .200 TYP .450 .220 .100 1.406 1.715 .200 TYP O.050 TY .625 1.000 .050 .203 TYP RSN116130 Side View Top View .450 .200 TYP .100 .220 1.406 1.725 .200 TYP .100 O.050 TY .050 .203 TYP .500 RSN112010 Side View Top View .450 .300 .150 .220 9X O.080 .630.432 2X O.050 1.715 1.406 .234 .625 1.000 .050 .203 TYP Board Mount Relay Sockets APCD P/N Mounting Stud QTY Size1 Contact P/N Config. RSN116140 HEX 14 16/16 /92-533 A RSN116130 HEX 8 16/16 /92-533 9 12/12 /92-535 2 16/16 /92-533 RSN112010 1 24 HEX Mating Relay Grams MIL-R-6106, MS27400 .055 25 B MIL-R-6106, MS27401 .033 15 C MIL-R-6106, MS27743 .057 26 Mating End/ Wire Barrel 2014 Amphenol Pcd Weight Pounds Mounting instructions can be found on page 26 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Non-Environmental Relay Sockets Solder Termination 6 Pole/5 Amp, 4 Pole/10 Amp, 2&4 Pole/5Amp, 2 Pole/10Amp Operating Range Mates with M25027 & Series 9226, 9224, 9225, 9220, 9229, 9927 Leach Corp. Relays Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-202, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Hardware: Stainless Steel or Steel w/Cadmium Chromate Finish Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with SAE-AMS-2422 Product Description Solder Termination Relay Sockets are made with a polyetherimide body and scalloped mounting flange to reduce weight and improve strength. Mounting hardware is supplied with the product. Socket Configurations Relay Socket Dimensions Solder Termination RSN116820 F E RSN116890 .440 .352 .264 .088 .435 .290 .145 .290 F E 2.196 1.844 .304 RSN116820 RSN116890 1.844 2.250 .145 O1.250 .750 1.500 .083 .093 RSN116891 .290 .083 .093 RSN116800 .264 .088 .435 .290 .145 .188 .266 1.844 .304 2.250 1.844 2.196 O1.300 .145 1.000 .152 RSN116800 .083 .750 .176 .093 1.500 .304 .080 RSN116825 .290 .188 1.844 2.196 .093 Max 1.062 RSN116810 .176 .266 .290 1.200 .152 RSN116810 O1.300 .145 .750 1.320 RSN116891 .266 .266 1.884 2.196 O 1.00 .145 RSN116825 .600 1.03 .080 .093 .093 .083 Solder Termination Relay Sockets APCD P/N Ref MIL STD Socket RSN116820 MS25330 MS25329 (6 Pole/5 Amp) 9226 Series RSN116890 MS25328 MS25327 (4 Pole/10 Amp) 9224 Series RSN116891 MS25462 MS25461 (4 Pole/10 Amp) 9225 Series RSN116800 MS25326 MS25325 (4 Pole/5 Amp) 9220 Series RSN116810 MS25322 MS25321 (2 Pole/10 Amp) 9229 Series RSN116825 MS25324 MS25323 (2 Pole/10 Amp) 9227 Series MIL STD Relay Leach Corp Relay Mounting instructions can be found on page 26 Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 25 Relay Socket Mounting Instructions Top Mount & Bottom Mount Mounting Instructions MIL-PRF-12883/40, MIL-PRF-12883/41; MIL-PRF-12883/47, MIL-PRF-12883/48; MIL-PRF-12883/54, MIL-PRF-12883/55 Top Mount Bottom Mount Silicone Rubber Gasket (Supplied With Relay) Relay Mounting Bracket (Ref.) Stud 4-40 Hex Lock Nut Flat Washers .125 Max. Mounting Panel Silicone Rubber Gasket (Supplied With Relay) Relay Mounting Bracket (Ref.) Stud 4-40 Hex Lock Nut Flat Washers 10-32 Hex Lock Nut .093 Max. Mounting Panel 4-40 Hex Lock Nut 4-40 Hex Lock Nut Mounting Instructions MIL-PRF-12883/44, MIL-PRF-12883/45; MIL-PRF-12883/46 Top Mount Bottom Mount Silicone Rubber Gasket (Supplied With Relay) Relay Mounting Bracket (Ref.) Stud 4-40 Hex Lock Nut Flat Washers .125 Max. Mounting Panel Silicone Rubber Gasket (Supplied With Relay) Relay Mounting Bracket (Ref.) Stud 4-40 Hex Lock Nut Flat Washers 8-32 Hex Lock Nut .093 Max. Mounting Panel 4-40 Hex Lock Nut 4-40 Hex Lock Nut Mounting Instructions Microminiature Relay Sockets Top Mount Bottom Mount Relay Mounting Bracket (Ref.) Relay Mounting Bracket (Ref.) 2-56 Screw (4-40 Config. C) 2-56 Screw (4-40 Config. C) Lock Washer Lock Washer Stud Spacer (.050 Thick) Stud .090 Max. Mounting Panel .050 Max. Mounting Panel Lock Washer Lock Washer 4-40 Hex Lock Nut 4-40 Hex Lock Nut Mounting Instructions Non-Environmental Solder Termination Relay Sockets Top Mount Bottom Mount Silicone Rubber Gasket (Supplied With Relay) Silicone Rubber Gasket (Supplied With Relay) 4-40 Pan Head Screw 4-40 Pan Head Screw # 4 Lock Washer # 4 Lock Washer # 10-32 Mounting Stud # 10-32 Mounting Stud # 10 Flat Washer (3) Mounting Panel Mounting Panel # 10-32 Self-Lock Hex Nut 26 2014 Amphenol Pcd www.amphenolpcd.com # 10-32 Self-Lock Hex Nut info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd Amphenol Pcd Relay Sockets JRS/JRE Quick-Mount Relay Sockets Amphenol Pcd recently introduced the JRS/JRE Quick-Mount Relay Sockets. These relay sockets snap mount into standard aircraft panel cutouts and eliminate all socket-to-bulkhead mounting hardware, simplifying installation and dramatically reducing weight and installation cost. JRS/JRE Quick-Mount Relay Sockets meet the applicable performance and dimensional requirements of MIL-PRF-12883, are compatible with Mil-Spec approved relays from any manufacturer, and can be used in existing avionic systems with standard slotted panel cutouts. JRS 4 Pole Relay Sockets JRS 3 Pole Relay Sockets JRS 2 Pole Relay Sockets JRS 1 Pole Relay Sockets JRE 2 Pole Relay Sockets JRE 4 Pole Relay Sockets PIVOT MOTION SNAPS SOCKET SECURELY INTO PANEL FOR RAPID AND RELIABLE INSTALLATION OF THE RELAY JRS SOCKET PANEL .064.005 THICK LOCATING BOSSES Key Features and Benefits Socket Construction & Installation JRS/JRE Relay Sockets maintain the same MIL mounting configurations and construction (molded polyetherimide bodies and silicone rubber sealing grommets) as Amphenol Pcd's traditional relay sockets. A heel and toe snap-in system allows the socket to be mounted to the panel without hardware and held securely in place. The assembled socket and relay meet all shock and vibration requirements per MILPRF-12883. LOCATING SNAPS THREADED SPACER CAPTIVATES MOUNTING SCREW SOCKET HEEL CONICAL SPRING POSITIONS MOUNTING SCREW CAPTIVE MOUNTING SCREW RELAY Lower Installed Cost Elimination of loose hardware and the time required to assemble individual hardware components to the sockets results in a reduction of over 45% in socket installation time. No Loose Hardware The combination of snap-in relay-to-panel mounting and per-assembled relay hardware eliminates all loose hardware from the socket and relay mounting and installation process. The logistical and safety issues related with loose hardware/FOD are completely avoided. Relay Installation JRS/JRE Relay Sockets feature externally threaded mounting screws and spacer assemblies which are per-assembled to the relay. These mounting screws are captured and aligned by a conical spring, and used to fasten the relay to the socket. The screws engage internally threaded bushings captured in the socket and once the relay is secured, the socket snap features are no longer under stress. Reduced Weight The elimination of socket mounting hardware and a streamlined polyetherimide body combine to reduce the weight of a Quick-Mount Relay Socket. When compared to standard MIL-PRF-12883 Relay Sockets, with traditional mounting hardware, the weight is reduced by approximately 30% to 40%. Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 27 Quick-Mount Relay Sockets JRS 1 Pole / 25 Amp / Size 12 & 16 Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-213, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Finish per SAE-AMS-2422 Replaces MIL-PRF-12883/55 Mates with M6106 Relays Relay Socket Dimensions Mounting Hardware Side View GASKET SUPPLIED WITH RELAY .890 RELAY MTG SCREW PHILLIPS HEAD .068 Bottom View CAPTURED SPRING .53 MAX SPACER 1.710 PANEL .064 .005 THICK Top View SOCKET 2X .100 1.406 WIRE SEALING GROMMET .234 .432 .630 Socket Configurations A Required Mounting Panel Cutout B Extended Height Relay Sockets APCD P/N JRS500100 JRS500200 1 28 2014 Amphenol Pcd QTY Size1 Contact P/N 2 16/16 /92-533 3 12/12 /92-535 2 16/16 /92-533 3 12/12 /92-535 2 22/22 /92-531 Config. Mating Relay A M6106/19, M6106/20 B M6106/20-002 Mating End/ Wire Barrel www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Quick-Mount Relay Sockets JRS 2 Pole / 10 Amp / Size 16 Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-213, Method 213 Test Condition C Replaces MIL-PRF-12883/41 Mates with M83536 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Finish per SAE-AMS-2422 Relay Socket Dimensions Mounting Hardware Side View 1.070 .89 RELAY MATING SCREW PHILLIPS HEAD GASKET SUPPLIED WITH RELAY Bottom View CAPTURED SPRING POLARIZING HOLE KEYED SPACER .52 PANEL .064 .005 THICK 1.71 Top View SOCKET 1.406 WIRE SEALING GROMMET .200 .200 TYP Socket Configurations Required Mounting Panel Cutout 1 X1 2X O .200 2 X2 X1 X2 B 3 .555 MIN A 3 B A A B 3 2 2 X2 X1 1 1 1.406 1.160 4X R .055 MAX A B C Extended Height Relay Sockets 1 Amphenol Pcd 2014 Amphenol Pcd APCD P/N QTY Size1 Contact P/N JRS200100 8 16/16 JRS200200 8 16/16 JRS200300 8 16/16 Config. Mating Relay /92-533 A M83536 /92-533 B M83536 /92-533 C M83536 Mating End/ Wire Barrel www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 29 Quick-Mount Relay Sockets JRS 3 Pole / 25 Amp / Size 12 & 16 Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-213, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Finish per SAE-AMS-2422 Replaces MIL-PRF-12883/48 Mates with M6106 & MS27743 Relays Relay Socket Dimensions Mounting Hardware Side View RELAY MATING SCREW PHILLIPS HEAD GASKET SUPPLIED WITH RELAY Bottom View CAPTURED SPRING SPACER PANEL .064 .005 THICK Top View SOCKET WIRE SEALING GROMMET Socket Configurations Required Mounting Panel Cutout 12 13 11 C A B 2 3 2 X2 X1 X2 X1 1 A B 1 A B Extended Height Relay Sockets APCD P/N JRS300100 JRS310100 1 30 2014 Amphenol Pcd QTY Size1 Contact P/N 2 16/16 /92-533 9 12/12 /92-535 5 16/16 /92-533 6 12/12 /92-535 Config. Mating Relay A M6106/13, MS27743 B M6106/13, MS27743 Mating End/ Wire Barrel www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Quick-Mount Relay Sockets JRS 4 Pole / 10 Amp / Size 16 Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-213, Method 213 Test Condition C Replaces MIL-PRF-12883/40 Mates with M83536,83726 & MS27709 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Finish per SAE-AMS-2422 Relay Socket Dimensions Mounting Hardware Side View RELAY MATING SCREW PHILLIPS HEAD GASKET SUPPLIED WITH RELAY CAPTURED SPRING Bottom View SPACER PANEL .064 .005 THICK Top View SOCKET 1.406 WIRE SEALING GROMMET .200 TYP 1.406 .200 TYP Socket Configurations A B C D Required Mounting Panel Cutout E Extended Height Relay Sockets 1 Amphenol Pcd 2014 Amphenol Pcd APCD P/N QTY Size1 Contact P/N JRS400100 14 16/16 JRS400200 14 16/16 JRS400300 14 JRS400400 14 JRS400500 16 Config. Mating Relay /92-533 A M83536, M83726, MS27709 /92-533 B M83536, M83726, MS27709 16/16 /92-533 C M83536, M83726, MS27709 16/16 /92-533 D M83536, M83726, MS27709 16/16 /92-533 E M83536, M83726, MS27709 Mating End/ Wire Barrel www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 31 Quick-Mount Relay Sockets JRE 2 Pole / 5 Amp / Size 20 Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-213, Method 213 Test Condition C Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Finish per SAE-AMS-2422 Replaces MIL-PRF-12883/41 Mates with M6106 & M83536 Relays Relay Socket Dimensions Mounting Hardware Side View .68 MTG SCREW RELAY CONICAL SPRING Bottom View SPACER 1.075 PANEL .064 .005 THICK .07 GASKET SUPPLIED WITH RELAY .150 .150 TYP .07 3-48 THREADED INSERT Top View SOCKET WIRE SEALING GROMMET SECTION A-A SCALE 5:3 POLARIZING HOLE B WIRE SUPPORT 1 A 2 .39 -X2 3 -X1 1.44 Socket Configurations Required Mounting Panel Cutout 1.075 A B A B 1 2 2 2 1 1 B A .965 -X2 -X1 -X2 -X1 -X2 -X1 3 3 3 2X O .150 .425 MIN 4X R .050 MAX A B C Extended Height Relay Sockets 1 Part Number Information APCD P/N QTY Size1 Contact P/N Config. Mating Relay JRE200100 8 20/20 /101-553 A M83536, M6106 JRE200200 8 20/20 /101-553 B M83536, M6106 JRE200300 8 20/20 /101-553 C M83536, M6106 APCD P/N Hardware Contacts JRE200100 None None JRE200101 None Yes JRE200110 Yes None Yes Yes JRE200111 Mating End/ Wire Barrel 32 2014 Amphenol Pcd Relay Socket Weight www.amphenolpcd.com info@amphenolpcd.com Relay Socket Ounces Grams Extended Height 0.02 5.81 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Quick-Mount Relay Sockets JRE 4 Pole / 5 Amp / Size 20 Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1000 VRMS at Sea Level 500 VRMS at 80,000 ft. Vibration: MIL-STD-202, Method 204 Test Condition G Shock: MIL-STD-213, Method 213 Test Condition C Replaces MIL-PRF-12883/44 Mates with M83536 Relays Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Finish per SAE-AMS-2422 Relay Socket Dimensions Mounting Hardware Side View .619 MTG SCREW RELAY .060 CONICAL SPRING Bottom View SPACER PANEL .064 .005 THICK .500 .07 GASKET SUPPLIED WITH RELAY 1.075 .07 3-48 THREADED INSERT Top View SOCKET 1.437 MAX WIRE SEALING GROMMET SECTION A-A SCALE 5:3 0.79 WIRE SUPPORT .150 TYP .150 TYP Socket Configurations 12 -X2 3 12 D D C C B +Y1 B A +X1 A 12 12 3 C B .500 -Y2 A .965 +X1 +X1 C .825 MIN +Y1 C -Y2 3 -X2 D +Y1 B A B -X2 D 4X R .050 MAX 3X O .150 -Y2 A +X1 Required Mounting Panel Cutout 3 -X2 1.075 D Part Number Information Extended Height Relay Sockets APCD P/N QTY Size1 Contact P/N JRE400100 14 20/20 JRE400200 16 20/20 JRE400300 16 JRE400400 16 Amphenol Pcd APCD P/N Hardware Contacts JRE400100 None None JRE400101 None Yes JRE400110 Yes None Yes Yes Config. Mating Relay /101-553 A M83536/5, M83536/6, M83536/7 /101-553 B M83536/5, M83536/6, M83536/7 20/20 /101-553 C M83536/5, M83536/6, M83536/7 Relay Socket Ounces Grams 20/20 /101-553 D M83536/5, M83536/6, M83536/7 Low Profile 0.38 10.9 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com JRE400111 Relay Socket Weight 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 33 Terminal Junction Modules MIL-T-81714 Series I Class D QPL-approved MIL-T-81714 modules and AS39029 contacts (formerly MIL-C-39029) are available in four standard sizes accommodating 12-26 AWG wires in both feedback and feedthru types with a full selection of bussing arrangements. The complete MIL-T-81714 Series I Terminal Junction Modules includes the following products. Feedback Modules Feedthru Modules Electronic Modules Single In-Line Splices Dual In-Line Splices Electronic Splices Ground Modules Mounting Tracks Key Features and Benefits Integral Socket/Bus Bar The patented integral socket/bus bar assembly provides superior electrical characteristics and assures mechanical integrity over a long product life. This unique design completely eliminates all solder of welded joints which could cause variation in electrical and/or mechanical performance. Integral Contacts Integral female contacts and bus bar have no mechanical functions - only the electrical conductivity function and highly conductive alloy for optimum electrical performance. Split Socket Design Split Socket Design, conforming to the mating pin diameter, provides peripheral surface wipe and contact, while using the maximum mating surfaces of pin and socket. High Density Modules A recently introduced series of high density modules which conform to all dimensional and performance requirements of MIL-T- 81714/17 is now available from Amphenol Pcd. The high density modules accept size 22 contacts in a compact 3x7 configuration, with a wide variety of bus arrangements. The construction features one-piece screw machine contacts with a split socket design for maximum performance. Contacts are securely packaged within a polyetherimide housing. Class D Modules System Amphenol Pcd was the first supplier to qualify module and track systems to high performance MIL-T-81714 Series I Class D requirements. Class D systems combine the maximum high temperature and high fluid resistance performance parameters previously divided among three module classes A, B, and C. Electronic Splices TJSE electronic modules can be supplied with a wide variety of diodes, resistors, capacitors, and fuses within the splice itself. TJSE electronic splices meet the electrical parameters of MIL-81714/24 and allow customers to incorporate system modifications into wire bundles. 34 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd General Table of Contents MIL-T-81714 Series I, Class D (Go directly to your desired productby clicking on Page Number) Military P/N Amphenol Pcd Amphenol Pcd P/N Page M81714/1 Feedback 36 M81714/2 Feedback 37 M81714/3 Feedback 38 M81714/4 Feedback 39 M81714/6 Feedthru 36 M81714/7 Feedthru 37 M81714/8 Feedthru 38 M81714/9 Feedthru 39 M81714/17 High Density 40 M81714/27 Ground Stud 41 M81714/25, (/26 Compatible) Electronic Terminal Junction 42-44 M81714/11, /12 (/24 Compatible) Terminal Junction Splices 45 M81714/21, /23 (& /21 Compatible) Electronic Splices 46 M81714/23 (/24 Compatible) Electronic Splices 47 M81714/24, Compatible Electronic Splices 48-50 M81714/5, /10, /16 (/29 Compatible) Tracks 51 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 35 MIL-T-81714/1, /6 Series I Size 22 Class D Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25oC Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 100,000 ft. Current Rating: 5 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Accepts Multiple Wire Sizes: Size 22, 24, 26 AWG Fluid Capability: Method 1016 per MIL-STD-1344 Terminal Junction Module Dimensions Feedback Dimensions E D C B A K J H G F Feedthru Dimensions 1.492 MAX .847 MAX .850 .390 .390 .850 Amphenol Pcd Terminal Junction Modules Feedback Bussing Config. E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H F G F E D C B A K J H F F Feedthru Contact MIL P/N APCD P/N MIL P/N APCD P/N QTY* Size1 P/N M39029 M81714/1-DA1 TJM122701 M81714/6-DA1 TJM222701 10 16/22 /1-100 M81714/1-DB1 TJM122702 M81714/6-DB1 TJM222702 10 16/22 /1-100 M81714/1-DB2 TJM122703 M81714/6-DB2 TJM222703 10 16/22 /1-100 M81714/1-DB3 TJM122704 M81714/6-DB3 TJM222704 10 16/22 /1-100 M81714/1-DC1 TJM122705 M81714/6-DC1 TJM222705 10 16/22 /1-100 M81714/1-DC2 TJM122706 M81714/6-DC2 TJM222706 10 16/22 /1-100 M81714/1-DC3 TJM122710 10 16/22 /1-100 M81714/1-DC4 TJM122712 10 16/22 /1-100 M81714/1-DD1 TJM122707 10 16/22 /1-100 M81714/1-DD2 TJM122711 10 16/22 /1-100 M81714/1-DE1 TJM122708 M81714/6-DD1 TJM222707 M81714/6-DE1 TJM222708 10 16/22 /1-100 M81714/6-DJ1 TJM222709 10 16/22 /1-100 *Contact quantity for feedthru is double feedback. Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and sealing plug per MIL-T-M81714. 1 Mating Pin/Wire Barrel 36 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-T-81714/2, /7 Series I Size 20 Class D Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25oC Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 100,000 ft. Current Rating: 7.5 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Accepts Multiple Wire Sizes: Size 20, 22, 24 AWG Terminal Junction Module Dimensions Feedback Dimensions K J H G Feedthru Dimensions F 1.492 MAX .847 MAX .850 .390 .390 .850 Amphenol Pcd Terminal Junction Modules Feedback Bussing Config. E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H G F E D C B A K J H F F E D C B A Feedthru Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 TJM120701 M81714/7-DA1 TJM220701 10 16/20 /1-101 M81714/2-DB1 TJM120702 M81714/7-DB1 TJM220702 10 16/20 /1-101 M81714/2-DB2 TJM120703 M81714/7-DB2 TJM220703 10 16/20 /1-101 M81714/2-DB3 TJM120704 M81714/7-DB3 TJM220704 10 16/20 /1-101 M81714/2-DC1 TJM120705 M81714/7-DC1 TJM220705 10 16/20 /1-101 M81714/2-DC2 TJM120706 M81714/7-DC2 TJM220706 10 16/20 /1-101 M81714/2-DC3 TJM120710 10 16/20 /1-101 M81714/2-DC4 TJM120712 10 16/20 /1-101 M81714/2-DD1 TJM120707 10 16/20 /1-101 M81714/2-DD2 TJM120711 10 16/20 /1-101 M81714/2-DE1 TJM120708 MIL P/N APCD P/N M81714/2-DA1 M81714/7-DD1 TJM220707 M81714/7-DE1 TJM220708 10 16/20 /1-101 M81714/7-DJ1 TJM220709 10 16/20 /1-101 *Contact quantity for feedthru is double feedback. Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and sealing plug per MIL-T-M81714. 1 Mating Pin/Wire Barrel Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 37 MIL-T-81714/3, /8 Series I Size 16 Class D Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25oC Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 100,000 ft. Current Rating: 13 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Accepts Multiple Wire Sizes: Size 16, 18, 20 AWG Terminal Junction Module Dimensions Feedback Dimensions D C B A H G F E Feedthru Dimensions 1.862 MAX 1.032 MAX .850 .390 .390 .850 Amphenol Pcd Terminal Junction Modules Feedback Bussing Config. D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E Feedthru Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 TJM116701 M81714/8-DA1 TJM216701 8 14/16 /1-102 M81714/3-DB1 TJM116702 M81714/8-DB1 TJM216702 8 14/16 /1-102 M81714/3-DB2 TJM116703 M81714/8-DB2 TJM216703 8 14/16 /1-102 M81714/3-DC1 TJM116705 M81714/8-DC1 TJM216705 8 14/16 /1-102 M81714/3-DC2 TJM116706 M81714/8-DC2 TJM216706 8 14/16 /1-102 M81714/3-DD1 TJM116707 M81714/8-DD1 TJM216707 8 14/16 /1-102 M81714/8-DG1 TJM216708 8 14/16 /1-102 M81714/8-DH1 TJM216709 8 14/16 /1-102 MIL P/N APCD P/N M81714/3-DA1 *Contact quantity for feedthru is double feedback. Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and sealing plug per MIL-T-M81714. 1 Mating Pin/Wire Barrel 38 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-T-81714/4, /9 Series I Size 12 Class D Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25oC Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 100,000 ft. Current Rating: 23 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Accepts Multiple Wire Sizes: Size 12, 14 AWG Terminal Junction Module Dimensions Feedback Dimensions D C B A H G F E Feedthru Dimensions 1.862 MAX 1.032 MAX .850 1.170 1.170 .850 Amphenol Pcd Terminal Junction Modules Feedback Bussing Config. D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E D C B A H G F E Feedthru Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 TJM112701 M81714/9-DA1 TJM212701 8 12/12 /1-103 M81714/4-DB1 TJM112702 M81714/9-DB1 TJM212702 8 12/12 /1-103 M81714/4-DB2 TJM112703 M81714/9-DB2 TJM212703 8 12/12 /1-103 M81714/4-DC1 TJM112705 M81714/9-DC1 TJM212705 8 12/12 /1-103 M81714/4-DC2 TJM112706 M81714/9-DC2 TJM212706 8 12/12 /1-103 M81714/4-DD1 TJM112707 M81714/9-DD1 TJM212707 8 12/12 /1-103 M81714/9-DH1 TJM212709 8 12/12 /1-103 MIL P/N APCD P/N M81714/4DA1 *Contact quantity for feedthru is double feedback. Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and sealing plug per MIL-T-M81714. 1 Mating Pin/Wire Barrel Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 39 MIL-T-81714/17 Series I Size 22D Class D High Density Modules Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25 C Dielectric Withstanding Voltage: 1000 VRMS at Sea Level 200 VRMS at 100,000 ft. Current Rating: 5 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Accepts Multiple Wire Sizes: Size 22, 26, AWG Terminal Junction Module Dimensions Feedback Dimensions Bussing Configuration .847 MAX .850 G F E D C B A P N M L K J H Z Y X W T S R Contacts Supplied: M39029/1-507 Quantity Supplied: 22 .390 Amphenol Pcd Terminal Junction Module Bussing Config. Feedback MIL P/N APCD P/N M81714/17-D30 Bussing Config. Feedback (Con.) MIL P/N APCD P/N TJHD22700 M81714/ 17 8-D38 TJHD22708 M81714/17 -D31 TJHD22701 M81714/ 17 -D39 TJHD22709 M81714/ 17 -D32 TJHD22702 M81714/ 17 -D40 TJHD22710 M81714/ 17 -D33 TJHD22703 M81714/ 17 -D42 TJHD22712 M81714/ 17 -D34 TJHD22704 M81714/ 17 -D43 TJHD22713 M81714/ 17 -D35 TJHD22705 M81714/ 17 -D44 TJHD22714 M81714/ 17 -D36 TJHD22706 M81714/ 17 -D45 TJHD22715 M81714/ 17 -D37 TJHD22707 Contacts Supplied: M39029/1-507 Qty 22 40 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Ground Stud Modules, Class D MIL-T-81714/27 Series I Compatible Size 12, 16, 20, 22 Operating Range Materials Temperature: -65C to 200C Current Rating: 5 Amps (Size 22) 7.5 Amps (Size 20) 13 Amps (Size 16) 23 Amps (Size 12) Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Socket Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Mounting Stud: Copper Alloy, Gold Plated per SAE-AMS-2422 Contact Retainers: Stainless Steel Internal Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Product Description Multi-contact grounding/bus connection modules are provided with an integral threaded grounding stud. The stud is electrically and mechanically common to all internal contacts of the module. Electrical connection and mechanical mounting are achieved through a single #10-32 stud. The modules are dimensionally identical to the compatible MIL-T-81714/27 grounding stud modules, but are not QPL. Direct mounting to a ground plane or ground wire with the terminal lug creates a convenient multi-wire sealed grounding device. Direct attachment to a bus bar transforms the device into a bus connection module for multi-contact power distribution, sensing or metering. All modules are furnished with complete mounting hardware. Terminal Junction Module Dimensions Top View .390 .390 .850 Size 16 Size 22, 20 Size 12 Side View .847 MAX 1.032 MAX 1.032 MAX .600 MAX .600 MAX .600 MAX .850 1.170 .850 Size 22, 20 Size 12 Size 16 Terminal Grounding Modules Part Numbers Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 M81714/27-22 TJG122701 10 16/22 /1-100 M81714/27-20 TJG120701 10 16/20 /1-101 M81714/27-16 TJG116701 8 14/16 /1-102 M81714/27-12 TJG112701 8 12/12 /1-103 *Quantity figure denotes number of contacts accommodated by module. Modules are supplied with two additional spare contacts and sealing plugs 1 Mating Pin/wire Barrel Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 41 Electronic Terminal Junction Modules MIL-T-81714/25, /26 Series I Compatible Size 20, 22 Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25 C Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 100,000 ft. Current Rating: 7.5 Amps Vibration & Shock: Per AS-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Internal Contact: Copper Alloy, Gold Finish Lockheed: Size 16 Electronics TJE116904=/19-D-602 Product Description Electronic Terminal Junction Modules meet all environmental and performance requirements of M81714/25 & /26 (but are not QPL) and are specifically developed for electronic component packaging. Available for size 20 and 22 contacts, these modules function as highly efficient and reliable electronic component packages. They improve system efficiency and density by permitting various electronic components such as diodes, resistors, fuses, and capacitors which usually take up valuable space elsewhere in the system, to be securely packaged within the module housing. Electronic components are encapsulated in semi-rigid elastomer that provides electrical spacing and insulation as well as shock and vibration protection. E D C B A Circuit Diagram APCD P/N Part Part P/N Quantity TJE120514 Capacitor 620pF 1* Circuit Diagram K J H G F APCD P/N Part Part P/N Quantity TJE120820 Diode 1N4003 3 TJE120822 Diode 1N4007 5 TJE120824 Diode JANTX1N5622 5* TJE120826 Diode 1N4006 5* TJE120827 Diode JANTX1N5552 4* TJE120828 Diode 1N5618 1* TJE120829 Diode 1N5618 2* TJE120831 Diode JANTIX1N5618 5* Diode JAN1N5418 1* E D C B A K J H G F E D C TJE120515 Capacitor 610pF A 1* K J H G F E D C A TJE120810 K J H G F E D Diode JANTX1N5552 5 M81714/26-D-002 compatible K J G F E D A K J G F A K J H G F A TJE120811 E D C Diode JANTX1N5552 4 E D C A K J H G F TJE120812 Diode JANTX1N5522 4 E D B A K J G E D C B A TJE120815 Diode 1N4005 2 TJE120816 Diode 1N4003 3 TJE120817 Diode 1N4003 2 K J H G F E D C B A K J H G F B A F D C E B A K G F E D C E D C B A K J H G F A K J H G F E D C B A TJE120818 Diode 1N4003 3 TJE120819 Diode 1N4003 3 K J H G F E D B A K J G F M81714/26-D-001 compatible TJE120833 E D C B A K J H G F E D C B A 42 2014 Amphenol Pcd K J H G F * With Contacts www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd Electronic Terminal Junction Modules MIL-T-81714/25, /26 Series I Compatible Size 20, 22 Amphenol Pcd Electronic Terminal Junction Modules Compatible Size 20 Circuit Diagram Circuit Diagram F G H J K APCD P/N APCD P/N Part Quantity IN4005 2 TJE120835 TJE120835 A B C Value or P/N A TJE120911 *** TJE120839 Diode JANTX1N5554 A 5* *** TJE120842 TJE120842 Resistor 10, 3/4W Resistor 100, 3/4W 5* K J H G F E D C A *** TJE120843 TJE120843 D D C A A TJE120860 IN4005 5 *** Resistor 10K 1/8W Resistor 150K 1/8W 5* K J H G F A *** TJE120902 TJE120902 A D C B A E D A K J F Resistor 33 1/4W A K J F Resistor 2K 1W 590 1W 2 Diode IN4005 4* Diode IN4005 4* Resistor 240K 1/2W 10K 1/2W 1* TJE120916 A TJE120917 TJE120917 TJE120918 TJE120918 Resistor TJE120922 TJE120922 C *** TJE120904 Resistor 1K 1/8W TJE120924 E D C 1* Resistor 4.42K, 3.4K, 3K, 2.75K, 1.75K 5 Resistor 1K 1W 4* Resistor 499 1W 5* Fuse 1 Amp 125V 5 Resistor 1.3K 1/4W 5 Resistor Thyristor 2N5604 100K 1/4W Resistor 1N4007 4.75K 1W 4* Resistor 100K 1/4W 5* TJE120924 D GND 300K 1/2W 10K 1/2W B A 2* TJE120925 TJE120925 K J H G F *** TJE120905 TJE120905 Resistor 1K 1/2W E D C A 2* TJE120927 TJE120927 K J H G F E D C Resistor 150 1/2W A 1 TJE120907 TJE120907 TJE120928 TJE120928 D Resistor 180 1/2W TJE120908 E D C B A TJE120908 Resistor 2K, 1.6K, 1.3 K, 1K, 750, 1/2W 5 Resistor 70K, x2, 280K, 500K 4 K J H G F A F TJE120909 TJE120909 B 1 K J H G F H 1* K J H G F E D C B A K E D 2* K J H G F C F A TJE120906 E A K J *** TJE120903 TJE120903 TJE120906 E D C B A 5.1K 1/2W H G F E D C GF E D Resistor K J H G F TJE120904 K J Quantity TJE120915 TJE120916 5* K J H G F B A E D Diode TJE120900 TJE120900 E D C F E E D C B K J H G F A H G K J TJE120860 E D C Value or P/N TJE120914 TJE120914 TJE120915 5* K J H G F E D C C B K J H G F A Part K J H G F TJE120839 E D C APCD P/N APCD P/N TJE120911 E D C B A Diode D E E D C Circuit Diagram TJE120929 TJE120929 J G B A D E D C C A TJE120932 TJE120932 1 1 TJE120935 TJE120935 K J H G F * With Contacts Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 43 Electronic Terminal Junction Modules MIL-T-81714/25, /26 Series I Compatible Size 20, 22 Amphenol Pcd Electronic Terminal Junction Modules Compatible Size 20,22 Circuit Diagram APCD APCD P/N Circuit Diagram E D B A P/N Resistor 271K 1/4 W 27.1K 1/4 W F J G E D C Value or P/N TJE120936 TJE120936 K Part A TJE120939 TJE120939 Resistor K J H G F B A 2* 2* 200K 1/8W 100K 1/8W A K J F E D A K J F E D C B A JANTX1N5618 D E F G A B TJE120991 H J K TJE120993 TJE120993 D E Part Value or P/N Quantity Resistor 56 100 1* 2* Resistor 39 120 1* 2* Resistor 220 1/4W 2 Resistor 100 1/4W 2 Rectifier BYW56 2 Rectifier BYW56 2 Resistor 1K 1/8W 2* C C 1* TJE120942 TJE120996 TJE120996 TJE120970 TJE120970 TJE120971 TJE120971 TJE120973 TJE120973 E D C B A Resistor 1K, 220, 100, 10K, 5.62K 5* Resistor 10K 1/2W 2* Resistor 47.5K 1/2W 2* Resistor 2.2K 5 Resistor 4.7K 5 K J H G F E D C B A TJE120991 H J K E D C B A Diode K J H G F A F G A B P/N K J H G F TJE120942 E D APCDP/N APCD 3* C E D C Circuit Diagram 2* TJE120941 TJE120941 D Quantity K J H G F TJE120997 TJE120997 E B A TJE120998 K G F TJE120998 E B A TJE120999 K G F E D B A K J G F TJE120999 TJE122904 TJE122904 TJE120974 TJE120974 * With Contacts K J H G F Top View Side View .69 .850 .700 MA X .390 .44 44 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd MIL-T-81714/11, /12 Series I Single/Dual/Diode MIL-T-81714/24 Series I Compatible Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 100,000 ft. Vibration & Shock: Per AS-81714 Paragraph 3.5.8 and 3.5.9 Insulator Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Internal contact Copper Alloy, Gold Finish Accordance with MIL-G-45204 Product Description Single, Dual, and Electronic Splices are designed to provide a quick and efficient solution to customer wiring requirements. Singleand Dual Wire Splices meet MIL-T-81714/11 &12 requirements and are highly resistant to temperature and fluids. TJSE electronic modules can be supplied with a wide variety of diodes, resistors, capacitors, and fuses within the splice itself. TJSE electronic splices meet the electronic parameters of MIL-81714/24 and allow customers to incorporate system modifications into a wire bundle, avoiding changes in panels or boards, but are not QPL. Terminal Junction Dimensions Single Splice Double Splice Electronic Splice 2.000 Max 1.552 Max C A .250 .025 Diameter .400 Max Dimension C Size 20/22 1.552 Max B Size 16 .275 Max 1.922 Max Single Wire Splices Dual Wire Splices Part Numbers Contact MIL P/N QTY Size P/N M81714/11-22D TJS322700 2 22 M39029/1-100* M81714/11-20D TJS320700 2 20 Part Numbers Bussing Type APCD P/N MIL P/N 81714 M39029/1-101* M81714/11-16D TJS316700 2 16 M39029/1-102* M81714/11-12D TJS312700 2 12 M39029/1-103* Contact APCD P/N QTY Size /12-22D-1 TJS322701 4 /12-20D-1 TJS320701 4 /12-16D-1 TJS316701 /12-22D-2 Dimensions P/N A B 22 /1-100 .400 .275* 20 /1-101 .400 .275* 4 16 /1-102 .500 .300* TJS322702 4 22 /1-100 .400 .275* /12-20D-2 TJS320702 4 20 /1-101 .400 .275* /12-16D-2 TJS316702 4 16 /1-102 .500 .300* Electronic Splices Compatible Part Numbers Circuit Type 1 Amphenol Pcd Contact MIL P/N1 81714 APCD P/N QTY /24-1D001 TJSE22701 /24-1D002 Diode Size P/N M39029 Diode P/N QTY 4 22 1-100 JANTX1N5618 1* TJSE20701 4 20 1-101 JANTX1N5618 1* /24-2D001 TJSE22702 4 22 1-100 JANTX1N5618 2* /24-2D002 TJSE20702 4 20 1-101 JANTX1N5618 MIL STD Compatible 2014 Amphenol Pcd 2* * With Contacts www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 45 MIL-T-81714/21, /23 Series I MIL-T-81714/21, /23 Series I Compatible Electronic Splices Single/Dual/Diode Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 100,000 ft. Vibration & Shock: Per AS-81714 Paragraph 3.5.8 and 3.5.9 Insulator Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Internal contact Copper Alloy, Gold Finish Accordance with MIL-G-45204 Product Description Amphenol Pcd is pleased to announce the support for MIL-T-81714/21 and /23 Series I Inline Electronic Splices, with Fuses and Diodes These products are QPL. Typical applications include power distribution on aircraft, military ground vehicles and seaborne systems in harsh environments. Amphenol Pcd electronic splices provide a convenient way to insert electronics into your circuit using our proven technology. Amphenol Pcd Terminal Junction Splices MIL-T-81714/21 Single MIL STD Circuit Diagram APCD P/N Part Part P/N Quantity TJSE22311 Diode JAN1N5618 1* Circuit Diagram *M81714/21-1D001 TJSE20311 APCD P/N Part Part P/N Quantity TJSE20312 Diode JAN1N4148 1* Diode JAN1N5620 1* *M81714/21-1D003 Diode JAN1N5618 1* TJSE20313 *M81714/21-1D002 *-M81714/21-1D004 Amphenol Pcd Terminal Junction Splices MIL-T-81714/21 Single Compatible Circuit Diagram APCD P/N Part Value or P/N Quantity APCD P/N Part Part P/N Quantity TJSE20100 Resistor 10K 1/2W 1 TJSE20106 Resistor 110 1W 1 TJSE20101 Resistor 22 1/2W 1 TJSE20107 Resistor 80.6 1W 1 TJSE20102 Resistor 56 1/2W 1 TJSE20108 Resistor 49.9 1W 1 TJSE20103 Resistor 330 1/2W 1 TJSE20109 Diode JANTX1N4488 1 TJSE20104 Resistor 430 1/2W 1 TJSE20110 Diode 1N4005 1 TJSE20113 Resistor 120 1/2W 1 TJSE20111 Diode JANTX1N5618 1 TJSE20105 Resistor 75 1W 1 TJSE22112 Diode 1N4007 1* Circuit Diagram Amphenol Pcd Terminal Junction Splices MIL-T-81714/23 Single MIL STD Circuit Diagram APCD P/N Part Vale Quantity TJSE20331 Fuse 1/16 Amp 125V 1* Circuit Diagram M81714/23-1D001 APCD P/N Part Value Quantity TJSE20332 Fuse 1/8 Amp 125V 1* M81714/23-1D002 * With Contacts 46 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-T-81714/23 Series 1 Electronic Terminal Junction Splices MIL-T-81714/24 Series I Compatible Product Description Amphenol Pcd's Electronic Terminal Junction Splices are available with a variety of components and in a wide range of configurations. Components available include but are not limited to diodes, resistors, fuses, capacitors, thyristors, and inductors, and are also available with multiple components within one module. The following are currently available, but new configurations are produced regularly and customized components are also available. M81714/23 are QPL. M81714/24 are not QPL. Amphenol Pcd Terminal Junction Splices MIL-T-81714/23 Single MIL STD Circuit Diagram APCD P/N Part Value or P/N Quantity TJSE20333 Fuse 1/4 Amp 125V 1* Circuit Diagram Fuse 3/8 Amp 125V 1* Fuse 1/2 Amp 125V 1* Fuse 3/4 Amp 125V 2-1/2 Amp 125V 1* Fuse 3 Amp 125V 1* Fuse 3-1/2 Amp 125V 1* 1* Fuse 4 Amp 125V 1* Fuse 5 Amp 125V 1* Fuse 7 Amp 125V 1* Fuse 10 Amp 125V 1* TJSE20343 *M81714/23-1D013 Fuse 1 Amp 125V 1* TJSE20344 *M81714/23-1D014 1-1/2 Amp 125 V Fuse *M81714/23-1D008 TJSE20339 Fuse TJSE20342 *M81714/23-1D007 TJSE20338 TJSE20340 *M81714/23-1D012 *M81714/23-1D006 TJSE20337 Quantity TJSE20341 *M81714/23-1D005 TJSE20336 Part P/N *M81714/23-1D011 *M81714/23-1D004 TJSE20335 Part *M81714/23-1D010 *M81714/23-1D003 TJSE20334 APCD P/N 1* TJSE20345 *M81714/23-1D015 Fuse 2 Amp 125V 1* TJSE20346 *M81714/23-1D009 *M81714/23-1D016 Amphenol Pcd Terminal Junction Splices MIL-T-81714/24 Double Compatible Size 20 Circuit Diagram APCD P/N Part Value or P/N Quantity APCD P/N Part Part P/N Quantity TJSE20501 Inductor 100 H 1* TJE20513 Capacitor 620pF 1* TJSE20503 Fuse 5 Amp 125V 1* TJSE20514 Fuse 1.5Amp 125V 1* TJSE20505 Resistor 39 1W 1* TJSE20515 Resistor 3K 1/4W 1* TJSE20506 Resistor 120 1W 2* B TJSE20516 Resistor 3K 1/4W 1* TJSE20509 Fuse 5 Amp 125V 2* B TJSE20517 Resistor 470 1/4 W 1 TJSE20510 Fuse 1 Amp 125V 1* TJSE20518 Resistor 3K 1W 2* Circuit Diagram * With Contacts Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 47 Electronic Terminal Junction Splices MIL-T-81714/24 Series I Compatible Size 20,22 Amphenol Pcd Terminal Junction Splices MIL-T-81714/24 Double Compatible Size 20 Circuit Diagram A APCD P/N Part Value or P/N Quantity APCD P/N Part Part P/N Quantity TJSE20519 Resistor 50 1W 2* TJSE20566 Resistor 120 0.5W 350V 2* TJSE20520 Capacitor 390pF 1* TJSE20571 Fuse 3Amp 125V 1* TJSE20523 Resistor 15K 1/4W 1* TJSE20602 Diode JANTX1N5618 2 TJSE20524 Resistor 5.1K 1/4W 1* TJSE20603 Resistor 5.1K 1/4W 2* TJSE20525 Resistor 10K 1/8W 1 TJSE20703 Diode 1N5819 2* TJSE20526 Resistor 910K 1/4W 1 TJSE20704 Diode JANTX1N5614 1* TJSE20527 Resistor 1.3K 1/4W 1 TJSE20705 Diode JANTX1N5622 1* TJSE20530 Resistor 1K 1W 1N5244 TJSE20706 Diode JANTX1N5622 2* Circuit Diagram A 1* 1 TJSE20533 Fuse Diode 2Amp 125 V 1* TJSE20707 Diode JANTX1N5622 2* TJSE20535 Fuse 7Amp 125V 1* TJSE20708 Diode JANTX1N5622 2* TJSE20537 Resistor 69.8 1/4W 1* TJSE20709 Diode JANTX1N5622 2* TJSE20553 Resistor 1K 1/2W 1* TJSE20710 Diode 1N4006 1 TJSE20554 Resistor 18K 1W 2* TJSE20711 Diode 1N4006 2 TJSE20555 Resistor 18K 1W 1* TJSE20712 Diode 1N4007 1 TJSE20559 Diode JANTX1N5554 1 TJSE20713 Diode JANTX1N3957 1 TJSE20561 Diode 1N5061 1* TJSE20716 Resistor 200 1/8W 1* * With Contacts 48 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd Electronic Terminal Junction Splices MIL-T-81714/24 Series I Compatible Size 20,22 Amphenol Pcd Electronic Terminal Junction Splices MIL-T-81714/24 Double Compatible Size 20 Circuit Diagram A A A APCD P/N Part Value or P/N Quantity APCD P/N Part Part P/N Quantity TJSE20722 Diode JANTX1N5819 1* TJSE20818 Resistor 100K 1/4W 2 TJSE20723 Diode JANTX1N5622 2* TJSE20820 Resistor 2M 1/4W 1 TJSE20724 Diode 1N4006 2* TJSE20821 Resistor 1M 1/4W 1 TJSE20725 Diode JANTX1N5622 2* TJSE20822 Resistor 49.9K 1/4W 1 TJSE20726 Diode 1N4006 2* TJSE20826 Resistor 3.9 1W 2 TJSE20727 Resistor 4.7K 3/4W 1* TJSE20828 Resistor 4 1/2W 1 TJSE20804 Resistor 4.9K 1/2W 1 TJSE20829 Resistor 16 1/2W 1 TJSE20805 Diode 1N6075 2 TJSE20830 Fuse 0.5Amp 125V 1* TJSE20806 Diode 1N4448 2 TJSE20834 Resistor 4.02 1W 1* TJSE20807 Resistor 5K 1W 2 TJSE20835 Resistor 1K 1/4W 1* TJSE20808 Resistor 1K 1W 2 TJSE20836 Resistor 3.1K 1/4W 1* TJSE20809 Resistor 5.76K 1W 2 TJSE20838 Resistor 750 1W 1* TJSE20810 Resistor 7.87K 1W 2 TJSE20843 Diode 1N5622 1* TJSE20811 Resistor 16.2K 1W 2 TJSE20901 Resistor 100K 1/4W 1* TJSE20812 Resistor 20K 1W 2 TJSE20902 Resistor 200K 1/4W 1* TJSE20813 Resistor 22.1K 1W 2 TJSE20903 Resistor 300K 1/4W 1* TJSE20816 Resistor 10K 1/4W 2 TJSE20904 Resistor 402K 1/4W 1* TJSE20817 Resistor 30.1K 1/4W 2 TJSE20905 Diode JANTX1N4488 2 A Circuit Diagram A A A A A A A A * With Contacts Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 49 Electronic Terminal Junction Splices MIL-T-81714/24 Series I Compatible Size 20, 22 Amphenol Pcd Electronic Terminal Junction Splices MIL-T-81714/24 Double Compatible Size 22 Circuit Diagram A B A C B D A 50 APCD P/N Part Value or P/N Quantity APCD P/N Part Value or P/N Quantity TJSE22503 Fuse 5 Amp 125V 1* TJSE22706 Diode JANTX1N5622 2* TJSE22504 Diode Resistor JANTX1N5618 1K 1/4W 1* 1* TJSE22707 Diode JANTX1N5622 2* TJSE22510 Fuse 1 AMP 125V 1* TJSE22708 Diode JANTX1N5622 2* TJSE22514 Resistor 10K 1/4W 1 TJSE22709 Diode JANTX1N5622 1* TJSE22517 Resistor 120 1W 1* TJSE22711 Diode 1N4006 2* TJSE22518 Resistor 120 1W 1 TJSE22720 Resistor 78.7 1/4W 2* TJSE22519 Resistor Capacitor 120 1W 1000pF 1* 1* TJSE22839 Resistor 4.99 1/4W 1* TJSE22521 Resistor 49.9 1W 1* TJSE22840 Resistor 3.24 1/4W 1* TJSE22523 Resistor 75 1/4W 2 TJSE22841 Resistor 39.2 1/4W 1* TJSE22550 Resistor 274 1W 1* TJSE22842 Resistor 47.5 1/4W 1* TJSE22701 Diode JANTX1N5618 1* TJSE22843 Resistor 100 1/4W 1* TJSE22702 Diode JANTX1N5618 2* TJSE22845 Resistor Capacitor 120 1W 10,000pF 1* 1* TJSE22705 Diode JANTX1N5622 1* 2014 Amphenol Pcd www.amphenolpcd.com Circuit Diagram info@amphenolpcd.com A * With Contacts 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd MIL-T-81714/5, /10, /16 Series I Terminal Junction Module Mounting Tracks MIL-T-81714/29 Series I Compatible Operating Range Materials Temperature: -65C to 200C Corrosion: No Exposure of Base Metal After 48 Hours of Salt Spray Magnetic Permeability: 2.0 MU Max. Vibration & Shock: Per MIL-T-81714 Paragraph 3.5.5 and 3.5.8 Rail: Aluminum Alloy, Black Anodized Finish per MIL-A-8625 Locking Clamp Screw: Corrosion Resistant, Passivated, Self Locking Product Description Amphenol Pcd offers feedback and feedthru mounting tracks, as well as a lightweight feedback type with weight reduction cutouts per MIL-T81714/16 for weight critical applications. One track holds all module sizes - with size 22, 20, and16 modules requiring one mounting space and size 12 requiring three. Each track unit consists of an aluminum alloy track and MIL-T-81714/16 anodized black locking clamp. The stainless steel clamp screw is self-locking to meet vibration, shock and temperature variation requirements. Feedback Track Dimensions STANDARD A Feedback Bracket Dimensions Feedthru Track Dimensions LIGHTWEIGHT A B A B A 1.120 1.890 HOLE FOR #6 FLAT HEAD SCREW B B 1.070 .970 1.120 1.120 Feedback Mounting Tracks Standard MIL P/N APCD P/N M81714/5-1 TJT701010 M81714/5-2 TJT701003 Feedback Mounting Bracket Compatible Tracks Lightweight Dimensions Standard MIL P/N APCD P/N Mounting Pos.* A'' B'' M81714/16-1 TJT703010 10 5.29 TJT703002 2 M81714/16-2 TJT703003 3 TJT701002 MIL P/N Mounting Pos.* A'' B'' 4.79 M81714/29-1 TJT400100 1 1.725 0.531 2.17 1.67 M81714/29-2 TJT400200 3 1.725 1.321 2.56 2.06 M81714/5-3 TJT701004 M81714/16-3 TJT703004 4 2.95 2.45 M81714/5-4 TJT701005 M81714/16-4 TJT703005 5 3.34 2.84 M81714/5-5 TJT701006 M81714/16-5 TJT703006 6 3.73 3.23 M81714/5-6 TJT701007 M81714/16-6 TJT703007 7 4.12 3.62 M81714/5-7 TJT701008 M81714/16-7 TJT703008 8 4.51 4.01 M81714/5-8 TJT701009 M81714/16-8 TJT703009 9 4.90 4.40 M81714/5-9 TJT701011 M81714/16-9 TJT703011 11 5.68 5.18 M81714/5-10 TJT701012 M81714/16-10 TJT703012 12 6.07 5.57 M81714/5-11 TJT701013 M81714/16-11 TJT703013 13 6.46 5.96 M81714/5-12 TJT701014 M81714/16-12 TJT703014 14 6.85 6.35 M81714/5-13 TJT701015 M81714/16-13 TJT703015 15 7.24 6.74 TJT701016 TJT703016 16 7.63 TJT701017 TJT703017 17 TJT701018 TJT703018 TJT701019 TJT701020 Amphenol Pcd 2014 Amphenol Pcd Dimensions APCD P/N * Divide by 3 for Size 12 Module Mounting Feedthru Mounting Tracks Standard Dimensions MIL P/N APCD P/N Mounting Pos.* A'' B'' M81714/10-1 TJT702010 10 5.55 5.05 TJT702002 2 2.43 1.91 M81714/10-2 TJT702003 3 2.82 2.32 M81714/10-3 TJT702004 4 3.21 2.71 7.13 M81714/10-4 TJT702005 5 3.60 3.10 8.02 7.52 M81714/10-5 TJT702006 6 3.90 3.49 18 8.41 7.91 M81714/10-6 TJT702007 7 4.38 3.88 TJT703019 19 8.80 8.30 M81714/10-7 TJT702008 8 4.77 4.27 TJT703020 20 9.19 8.69 M81714/10-8 TJT702009 9 5.16 4.66 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 51 Socket Junction Modules MIL-T-81714 Series II Class D The high pin count, low weight MIL-T-81714 Series II Socket Junction Module System is available in four basic module sizes, accommodating 12-26 AWG wire in a broad selection of bussing arrangements. Modules are supplied with the appropriate and specified AS39029/22 socket contacts (formerly MIL-C-39029/22). Feedback Modules; Feedthru Modules; Distribution Modules Sealed Splices Board Mount Modules Ground Modules Mounting Tracks Key Features and Benefits Improved Performance Significant Amphenol Pcd design innovations over conventional Series II systems assure superior performance in wire sealing, contact alignment & retention, and module extraction. Feedback Modules The SJM feedback modules and mounting track system offer a lightweight junction system with a full range of bussing arrangements. Distribution Modules Distribution modules provide a variety of contact combinations for power distribution applications and have the same construction and features as the standard Series II modules. Ground Modules SJG grounding modules are available in both center stud and mounting flange versions. Board Mount Pin Modules The socket junction modules indicate on the following pages can also be provided in a solder pin version for mounting directly to printed circuit boards, providing a flexible, compact wiring package and eliminating the need for mounting a track. 52 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd General Table of Contents MIL-T-81714 Series II, Class D (Go directly to your desired product by clicking on Page Number) Amphenol Pcd 2014 Amphenol Pcd Military P/N Module Types Page M81714/60 Socket Junction Modules 54-57 M81714/61 Socket Junction Modules 58 M81714/63 Socket Grounding Modules 59-60 M81714/62 Compatible Electronic Socket Junction Modules 61-63 M81714/65 In-Line Junction Splices 64 M81714/67 Socket Junction Module Mounting Track 65 M81714/67 Compatible Socket Junction composite Mounting Track 66 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 53 MIL-T-81714/60-22 Series II Size 22 Operating Range Materials Temperature Limits: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25C Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 110,000 ft. Current Rating: 5 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Contact Retainers: Stainless Steel Internal Pin and Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Socket Junction Module Dimensions Front & Side View Top View .760 MAX .672 A B C D E F G H J K L M N P R S T W Y Z SKT .510 M81714/60-22-01 SHOWN Amphenol Pcd Socket Junction Modules Bussing Config. Part Numbers Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 M81714/60-22-01 SJM022100 20 22/22 /22-191 M81714/60-22-02 SJM022200 20 22/22 /22-191 M81714/60-22-04 SJM022400 20 22/22 /22-191 M81714/60-22-05 SJM022500 20 22/22 /22-191 M81714/60-22-06 SJM022600 20 22/22 /22-191 M81714/60-22-10 SJM022700 20 22/22 /22-191 * Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and two sealing plugs per MIL-T-M81714. 1Mating End / Wire Barrel. 54 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-T-81714/60-20 Series II Size 20 Operating Range Materials Temperature Limits: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25C Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 110,000 ft. Current Rating: 7.5 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Contact Retainers: Stainless Steel Internal Pin and Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Socket Junction Module Dimensions Front & Side View Top View A .920 MAX K D E C G H F J L SKT .672 B M .510 M81714/60-20-01 SHOWN Amphenol Pcd Socket Junction Modules Bussing Config. Part Numbers Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 M81714/60-20-01 SJM020100 12 20/20 /22-192 M81714/60-20-02 SJM020200 12 20/20 /22-192 M81714/60-20-03 SJM020300 12 20/20 /22-192 M81714/60-20-04 SJM020400 12 20/20 /22-192 M81714/60-20-06 SJM020600 12 20/20 /22-192 * Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and two sealing plugs per MIL-T-M81714. 1Mating End / Wire Barrel. Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 55 MIL-T-81714/60-16 Series II Size 16 Operating Range Temperature Limits: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25C Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 110,000 ft. Current Rating: 13 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Materials Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Contact Retainers: Stainless Steel Internal Pin and Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Socket Junction Module Dimensions Front & Side View Top View AB CD .920 MAX EF SKT .672 .510 M81714/60-16-01 SHOWN Amphenol Pcd Socket Junction Modules Bussing Config. Part Numbers Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 M81714/60-16-01 SJM016100 6 16/16 /22-193 M81714/60-16-02 SJM016200 6 16/16 /22-193 M81714/60-16-03 SJM016300 6 16/16 /22-193 *Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and two sealing plugs per MIL-T-M81714. 1 Mating End / Wire Barrel. 56 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-T-81714/60-12 Series II Size 12 Operating Range Materials Temperature Limits: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25C Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 110,000 ft. Current Rating: 23 Amps Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Contact Retainers: Stainless Steel Internal Pin and Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Socket Junction Module Dimensions SKT F Top View C Front & Side View B E D 1.020 A 1.047 MAX .672 M81714/60-12-01 SHOWN Amphenol Pcd Socket Junction Modules Bussing Config. Part Numbers Contact MIL P/N APCD P/N QTY* Size1 P/N M39029 M81714/60-12-01 SJM012100 6 12/12 /22-605 M81714/60-12-02 SJM012200 6 12/12 /22-605 M81714/60-12-03 SJM012300 6 12/12 /22-605 Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and two sealing plugs per MIL-T-M81714. 1Mating End / Wire Barrel. Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 57 MIL-T-81714/61 Series II Distribution Socket Junction Modules Operating Range Materials Temperature Limits: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25C Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 110,000 ft. Current Rating: 5 Amps (Size 22) 7.5 Amps (Size 20) 13 Amps (Size 16) 23 Amps (Size 12) Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Contact Retainers: Stainless Steel Internal Pin and Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Socket Junction Module Dimensions M81714/61-OY: Front View M81714/61-OY: Side View .920 MAX .672 .510 M81714/61-OZ, M81714/61-OX, M81714/61-OW: Front View M81714/61-OZ, M81714/61-OX, M81714/61-OW: Side View 1.047 MAX 1.020 .672 Amphenol Pcd Socket Junction Modules Bussing Config. Feedback MIL P/N APCD P/N M81714/61-OZ SJM000100 M81714/61-OY SJM000800 M81714/61-OX SJM000200 M81714/61-OW 58 2014 Amphenol Pcd Contact www.amphenolpcd.com SJM000500 Bussing QTY* Size1 P/N M39029 6 16 /22-193 2 12 /22-605 6 20 /22-192 2 16 /22-193 6 16 /22-193 2 12 /22-605 5 22 /22-191 5 20 /22-192 5 16 /22-193 info@amphenolpcd.com 1(978) 624-3400 Bus Description 1 Bus Two, size 12 & Six, size 16 1 Bus Two, size 16 & Six, size 20 2 Busses One, size 12 & Three, size 16 per Bus 5 Busses One, size 22 & one, size 20; One size 16 per Bus 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-T-81714/63 Series II Stud Mount Size 16, 20, 22 Socket Ground Modules Operating Range Materials Temperature Limits: -65C to 200C Current Rating: 5 Amps (Size 22) 7.5 Amps (Size 20) 13 Amps (Size 16) 23 Amps (Size 12) Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Product Description M81714/63 Stud Mount, Socket Grounding Modules mount directly to a ground plane or ground lug, creating a multi-wire sealed grounding device. The grounding modules could also Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A59588 Contact Retainers: Stainless Steel Stud / Shell: Copper Alloy, Gold Plated per SAE-AMS-2422. Tin Plating per ASTM-B545 also available as an alternate Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 be mounted to a bus bar for power distribution, sensing or metering. All mounting hardware is furnished and custom hardware configurations are available. The mounting stud is available in gold or tin plating. Socket Junction Module Dimensions Top View .740 .740 .580 .740 .580 .580 Size 22 Size 16 Size 20 Side View .995 MAX .995 MAX .350 .995 MAX .350 .350 Size 22 Size 20 Size 16 Socket Grounding Modules Part Numbers Contact Size1 Plating 20 22/22 /22-191 Gold SJG022100 20 22/22 /22-191 Tin SJG020170 12 20/20 /22-192 Gold SJG020100 12 20/20 /22-192 Tin SJG016170 6 16/16 /22-193 Gold SJG016100 6 16/16 /22-193 Tin MIL P/N QTY* M81714/63-22S SJG022170 M81714/63-20S M81714/63-16S Stud P/N M39029 APCD P/N *Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and two sealing plugs per MIL-T-M81714 1 Mating End / Wire Barrel Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 59 MIL-T-81714/63 Series II Flange Mount Size 12, 16, 20, 22 Socket Ground Modules Operating Range Materials Temperature Limits: -65C to 200C Current Rating: 5 Amps (Size 22) 7.5 Amps (Size 20) 13 Amps (Size 16) 23 Amps (Size 12) Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.59 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Stud/Shell: Copper Alloy, Gold Plated per SAE-AMS-2422. Tin Plating per ASTM-B545 also available as an alternate Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Product Description M81714/63, flange mount, socket grounding modules mount directly to a ground plane or ground lug creating a multi-wire sealed grounding device. The grounding modules could also be mounted to a bus bar for power distribution, sensing or metering. All mounting hardware is furnished and custom hardware configurations are available. The mounting stud is available in gold or tin plating. Socket Junction Module Dimensions Top View 1.036 1.472 1.036 1.472 .740 Size 22 1.036 1.472 .740 .740 Size 20 Size 16 1.176 1.622 1.066 Size 12 Side View Size 20 Size 22 1.125 MAX .995 MAX .995 MAX .995 MAX Size 16 Size 12 Socket Grounding Modules Feedback Contact Flange Size1 P/N M39029 Plating 20 22/22 /22-191 Gold SJG022200 20 22/22 /22-191 Tin SJG020270 12 20/20 /22-192 Gold SJG020200 12 20/20 /22-192 Tin M81714/63-16F SJG016270 6 16/16 /22-193 Gold SJG016200 6 16/16 /22-193 Tin M81714/63-12F SJG012270 6 12/12 /22-605 Gold SJG012200 6 12/12 /22-605 Tin MIL P/N APCD P/N QTY* M81714/63-22F SJG022270 M81714/63-20F *Quantity figure denotes number of contacts accommodated by module. Modules are supplied with one additional spare contact and two sealing plugs 1 Mating End / Wire Barrel 60 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Board Mount Socket Junction Modules MIL-T-81714/62 Series II Compatible Size 12, 16, 20, 22 Operating Range Materials Temperature: -65C to 125C Insulation Resistance: 1000 Megaohms Min. Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 80,000 ft. Current Rating: 5 Amps (Size 22) 7.5 Amps (Size 20) 13 Amps (Size 16) 23 Amps (Size 12) Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.59 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Contact Retainers: Stainless Steel Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Product Description The Socket Junction Modules can be provided in a solder pin version for mounting directly to printed circuit boards, while providing a flexible, compact wiring package and eliminating the need for a mounting track. Support size 12, 16, 20, & 22 contacts; and PCB thicknesses of .187 and .250. They are not QPL. Socket Junction Module Dimensions Top View, Size 22 Top View, Size 22 & 16 Top View, Size 12 SKT M J L G K E H D C B A .510.010 .510.030 F .675.010 .672.015 Side View, Size 22 Side View, Size 22 & 16 Side View, Size 12 .920 MAX .760 MAX L .010 L .010 20X O.030.001 12X O .040 .001 Board Mount Socket Junctions 1 APCD P/N QTY Size1 Contact P/N Config. DIM. L SJP022000 20 22/22 M39029/22-191 A .187 SJP022010 20 22/22 M39029/22-191 A .250 SJP020000 12 20/20 M39029/22-192 B .187 SJP020010 12 20/20 M39029/22-192 B .250 D E C SJP016000 6 16/16 M39029/22-193 C .187 G H F SJP016010 6 16/16 M39029/22-193 C .250 SJP012000 6 12/12 M39029/22-605 D .187 SJP012010 6 12/12 M39029/22-605 D .250 SJP012020 6 12/12 M39029/22-605 D .335 Module Configurations B A K J L SKT A M B C Mating End / Wire Barrel Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 61 Electronic Socket Junction Modules MIL-T-81714/62 Series II Compatible SJE Component Modules Operating Range Materials Temperature Limits: -65C to 200C Insulation Resistance: 5000 Megaohms @ 25C Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 110,000 ft. Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Module Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Blend Elastomer per A-A-59588 Contact Retainers: Stainless Steel Internal Pin and Socket Contacts: Copper Alloy, Hard Gold Plated in Accordance with MIL-G-45204 Product Description Amphenol Pcd's Electronic Socket Junction Modules are available with a variety of components and in a wide range of configurations. Components available include, but are not limited to, diodes, resistors, fuses, thyristors, and inductors, and are also available with multiple components within one module. There are new configurations produced regularly and customized components are also available. They are not QPL. Contact us for more details. Socket Junction Module Dimensions Side View Circuit Diagram 1.170 MAX K A B D E F G J SJE020003 K SJE020006 A B C D E F G H J F G H J APCD APCD P/N SJE020001 A B 470 1/2W 5 5 F G H J JANTX1N4246 5 K SJE020010 A B C D E SJE020010 Diode B A SJE020009 JANTX1N5618 5 10K 1/10W 5 Diode JANTX1N649-1 6 JANTX1N5618 5 JANTX1N5618 5 JANTX1N3613 6 SJE020016 Diode SJE020022 Diode K D C Resistor Quantity SJE020015 SJE020015 SJE020022 K Diode SJE020011 SJE020011 Value or P/N K A B C D E JANTX1N5550 Part SJE020016 SJE020008 Diode SJE020010 APCD P/N K F G H J SJE020009 E L M N P R F G H J K SJE020023 SJE020023 Diode Amphenol Pcd K A B C D E 2014 Amphenol Pcd F G H J Resistor J A B C D E K A B C D E 62 H SJE020009 K A B C D E 2 F SJE020008 F G H J JANTX1N6052A SJE020006 A B C D E F G H J Diode K SJE020006 F G H J A B C D E 5 SJE020003 A B C D E F G H J JANTX1N5552 F G H J D E J Diode K SJE020003 F G F G H J K Electronic Socket Junction Modules A B C D E Value or Quantity Circuit Diagram P/N F G H J K SJE020001 A B C D E F G H J P/NPart SJE020008 K A B C D E CircuitDiagram Diagram Circuit .672 K A B C D E 1.02 APCD P/N SJE020001 A B C D E F G H J Top View K SJE020011 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Electronic Socket Junction Modules MIL-T-81714/62 Series II Compatible SJE Component Modules Amphenol Pcd Electronic Terminal Junction Splices MIL-T-81714/24 Double Compatible Size 20, 22 Circuit Diagram Circuit Diagram APCD APCDP/N P/N SJE020025 F G H J H J SJE020047 A L F B M G C B A L M F G E SJE020048 E R Diode JANTX1N3613 5 Diode JANTX1N5618 1 Diode 1N5616 5 Resistor 10K 1/4W Diode JANTX1N5618 Diode JANTX1N5550 A B C D E Diode JANTX1N5618 H J Resistor 56.2K 5 Diode JANTX1N649-1 6 SJE020061 Resistor 4.7K 1/4W 6 K SJE020062 SJE020062 Resistor 100K 1/10W K 5 www.amphenolpcd.com E F H K SJE020075 A B C D E G H J K A B C D E G H J K A B F 2014 Amphenol Pcd C K F G C D E H J info@amphenolpcd.com SJE020071 SJE020075 A F G H J F SJE020071 Resistor 120 5 Resistor 90.9 2W 3 Resistor 2K 1/8W 5 Resistor 54K 1/8W 6K 1/8W 11 Resistor 1K 1/8W 4 Fuse 1Amp 125V 5 K A B C D E 3 K SJE020068 K A B C D E 4 3 SJE020067 SJE020068 5 SJE020059 SJE020067 K 32 SJE020058 SJE020059 A B C D E Amphenol Pcd 1N4007 1N5406 SJE020056 SJE020061 F G H J Diode F SJE020058 A B C D E F G H J A B C D E 5 K D P J 1N4007 F G H J SJE020056 R K J C N H E D Quantity K F G H J K P N H Diode SJE020065 SJE020065 K D G H J 5 SJE020047 SJE020053 G 1N4001 SJE020053 A B C D E K SJE020064 A B C D E Diode K F G H J Value or P/N SJE020063 SJE020064 AB 5 Part K F G H J K F G H J C 51.1 1/8W K SJE020048 K Diode P/N SJE020063 SJE020045 A B C D E B A B C D E APCDP/N APCD F G C D E F G H J K 5 K A B C D E A 100 1/8W SJE020026 SJE020045 K Diode Circuit Circuit Diagram Diagram F G H J SJE020026 F G Quantity K A B C D E AB Value or P/N SJE020025 A B C D E F G H J Part SJE020919 SJE020919 SJE020920 SJE020920 SJE020924 SJE020924 SJE020927 SJE020927 K 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 63 MIL-T-81714/65 Series II SJS Single & Double Sealed In-Line Splices Operating Range Materials Temperature: -65C to 200C Insulation Resistance: 5000 Megaohms Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 200 VRMS at 110,000 ft. Vibration & Shock: Paragraph 3.5.8 & 3.5.9 Per MIL-T-81714 Current Rating: 13 Amps (Size 16) 7.5 Amps (Size 20) 5 Amps (Size 22) Insulator Body: Polyetherimide per ASTM-D5205 Grommet: Silicone Rubber per A-A-59588 Internal Contact: Copper Alloy, Gold Finish in Accordance with MIL-G-45204 Product Description Series II In-Line Splices are available in single and double configurations. They come in sizes 16, 20, and 22 AWG. M81714/65 Splices use the same advanced polyetherimide body, one-piece bus assembly and construction as Amphenol Pcd's other M81714 connectors. Sealed Splice Contacts In-Line Splice Contact M81714/65-16-1 M39029/22-193 M81714/65-20-1 M39029/22-192 M81714/65-22-1 M39029/22-191 M81714/65-16-2 M39029/22-193 M81714/65-20-2 M39029/22-192 M81714/65-22-2 M39029/22-191 Splice Dimensions Single SJS Splices: Side View Double SJS Splices: Side View Dim. L Dim. L Dimension L Wire Size 1.452 Max 1.434 Max 1.310 Max Size 16 Size 20 Size 22 Double SJS Splices Military P/N APCD P/N O Diameter M81714/65-16-1 SJS316700 .324 Max M81714/65-20-1 SJS320700 .290 Max M81714/65-22-1 SJS322700 .230 Max 2014 Amphenol Pcd 1.428 Max 1.428 Max 1.322 Max Size 16 Size 20 Size 22 Single SJS Splices 64 Dimension L Wire Size www.amphenolpcd.com B C info@amphenolpcd.com A Military P/N APCD P/N A B C M81714/65-16-2 SJS316701 .548 Max .304 Max .180 Max M81714/65-20-2 SJS320701 .481 Max .271 Max .150 Max M81714/65-22-2 SJS322701 .384 Max .204 Max .120 Max 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd MIL-T-81714/67 Series II Socket Junction Module Mounting Tracks Operating Range Materials Temperature Limits: -65C to 200C Corrosion: No Exposure of Base Metal After 48 Hours of Salt Spray Magnetic Permeability: 2.0 MU Max. Vibration & Shock: Per MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Rail: Aluminum Alloy, Black Anodized Spring Clips: Stainless Steel Rivets: Stainless Steel Socket Junction Module Dimensions Top View Cross Section A .518 TYP .915 MAX .224 TYP .665 1.060 MAX B .167 .194 DIA ELONGATED HOLE Socket Junction Modules Mounting Track Removal Tools Dimensions Military P/N APCD P/N Mounting Pos.* A B M81714/67-02 SJT502404 2 1.036 0.518 M81714/67-03 SJT503404 3 1.554 1.036 M81714/67-04 SJT504404 4 2.072 1.554 M81714/67-05 SJT505404 5 2.590 2.072 M81714/67-06 SJT506404 6 3.108 2.590 M81714/67-07 SJT507404 7 3.626 3.108 M81714/67-08 SJT508404 8 4.144 3.626 M81714/67-09 SJT509404 9 4.662 4.144 M81714/67-10 SJT510404 10 5.180 4.662 M81714/67-12 SJT512404 12 6.216 5.698 M81714/67-13 SJT513404 13 6.734 6.216 M81714/67-14 SJT514404 14 7.252 6.734 M81714/67-15 SJT515404 15 7.770 7.252 M81714/67-16 SJT516404 16 8.288 7.770 M81714/67-18 SJT518404 18 9.324 8.806 M81714/67-19 SJT519404 19 9.842 9.324 M81714/67-20 SJT520404 20 10.360 9.842 M81714/67-21 SJT521404 21 10.878 10.360 M81714/67-25 SJT525404 25 12.950 12.432 M81714/67-30 SJT530404 30 15.540 15.022 M81714/67-32 SJT532404 32 16.576 16.058 M81714/67-40 SJT540404 40 20.720 20.202 Military P/N APCD P/N Description M81714/69-01 CNA051300 Single 22, 20, 16 M81714/69-02 CNA052300 Double 12 3.30 Max COMMON PROFILE SINGLE DOUBLE *Size 12 Modules require two mounting positions; alternate marking styles available Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 65 Composite Socket Junction Modules Mounting Tracks MIL-T-81714/67 Series II Compatible Operating Range Materials Temperature: -65C to 175C Vibration & Shock: MIL-T-81714 Paragraph 3.5.8 and 3.5.9 Rail: Glass filled Polyetherimide Color: Black Product Description The SJTC Mounting Track is fabricated of glass-filled polyetherimide which was selected for its unique combination of high strength, light weight, chemical resistance and dimensional stability. The track is available with 2 through 20 mounting positions, and is inter-changeable with existing aluminum tracks. This new track is 45% lighter than the aluminum track and 10% lighter than any other Series II track available. It also meets all dimensional requirements of MIL-T-81714. Composite Socket Junction Module Mounting Tracks Top View Cross Section DIM. B .972 .890 .224 TYP .259 .892 Composite Socket Junction Module Mounting Tracks Removal Tools Dimensions Military P/N APCD P/N Mounting Pos.* A B M81714/67-02 SJTC02000 2 1.036 0.518 M81714/67-03 SJTC03000 3 1.554 1.036 M81714/67-04 SJTC04000 4 2.072 1.554 M81714/67-05 SJTC05000 5 2.590 2.072 M81714/67-06 SJTC06000 6 3.108 2.590 M81714/67-07 SJTC07000 7 3.626 3.108 M81714/67-08 SJTC08000 8 4.144 3.626 M81714/67-09 SJTC09000 9 4.662 4.144 M81714/67-10 SJTC10000 10 5.180 4.662 M81714/67-11 SJTC11000 11 5.698 5.180 M81714/67-12 SJTC12000 12 6.216 5.698 M81714/67-13 SJTC13000 13 6.734 6.216 M81714/67-14 SJTC14000 14 7.252 6.734 M81714/67-15 SJTC15000 15 7.770 7.252 M81714/67-16 SJTC16000 16 8.288 7.770 M81714/67-17 SJTC17000 17 8.806 8.288 M81714/67-18 SJTC18000 18 9.324 8.806 M81714/67-19 SJTC19000 19 9.842 9.324 M81714/67-20 SJTC20000 20 10.360 9.842 Military P/N APCD P/N M81714/69-01 CNA051300 Single M81714/69-02 CNA052300 Double Description 3.30 Max COMMON PROFILE SINGLE DOUBLE *Size 12 Modules require two mounting positions; alternate marking styles available 66 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Ground Blocks Size 16, 20 Materials Web Membrane: Silicone per A-A-59588. class 2B, 40 durometer; color: clear Grommet: Silicone per A-A-59588, class 2B, 40 durometer; color: grey Housing: Glass reinforced polyamide; color: red (size 20), blue (size 16) Internal Contacts: BeCu C17410, gold per MIL-DTL-45204, Type II, Grade C, Class 1, over nickel per SAE-AMS-QQ-N-290, class 1 Base: Aluminum A380.0, chromate conversion per MIL-DTL-81706, type 1, class 1A, method C Features and Benefits * Overmold Technology: Simplifies construction and improves sealing and reliability * Plastic retention clip- made with VICTREX(R) PEEK Polymer: Simplifies construction; uses 1 plastic piece vs 6 individual metal pieces * FODSeal Technology (Patented): Reduces FOD, part count and weight by eliminating sealing plugs * Smart Engineering: Weight Savings - up to 0.06 oz per block vs standard designs, yielding up to 2lbs per plane on typical aircraft Product Description Combining advanced materials with an elegant design, Amphenol Pcd's Ground Blocks provide the lightest weight, highest density solution to tie multiple system components to ground available in the market today. Wired connections are environmentally sealed, providing protection from moisture, spray, and debris. Unused connections are protected via Amphenol's patented FODSeal membrane, which replaces the sealing plugs, reducing FOD, weight, and part count. Amphenol Pcd's Ground Blocks are ideal for use in harsh environments typically found in aircraft, ground vehicle, and naval applications. Ground Block Dimensions Side View Front View Top view size 20 Top View size 16 Part Number Amphenol Pcd 2014 Amphenol Pcd APCD P/N With/Without Contacts Number of Contacts Contact Size Boeing P/N BDX016016-2 Without 12 16 BACC50AN16H BDX016017-2 With 12 16 BACC50AN16 BDX016020-2 Without 16 20 BACC50AN20H BDX016021-2 With 16 20 BACC50AN20 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 67 Luminus Series The Luminus Series are lightweight, cost-effective connectors that are highly reliable and simple to use. With multiple configurations and arrangements available, a solution can be tailored to suit your application's exact requirements. Proven solutions can be found in single engine general aviation, multiple-engine business and passenger jets, and high performance rotary aircraft. Ideal where space is limited, these innovative, "scoop-proof" connectors feature a locking mechanism that ensures stability, are suitable for blind-mating, and are RoHS compliant. Features and Benefits 68 1/4 turn bayonet style connection; push and snap connection Makes wire installation and maintenance easy and efficient; positive "click" when locked Interfacial and Triple-Barrier Seal Enables environmental sealing (IP 67 rating) AS39029 Contacts MIL Spec contacts for broad application compatibility Stamped & Formed Contacts For applications where MIL Spec contacts are not necessary; lighter vs. MIL Spec contacts & less expensive Multiple Keying Positions Ensures proper connectivity Multiple Configurations and Accessories Tailored solutions to application needs Rugged Polyamide Housings; 500 mating cycles Durability Blind-Mate Connection Enables simple, blind mating; easy assembly Visual markings Visual aid for easy assembly D160, M81714, FAR25 Compliance Meets demanding military-aerospace environmental conditions 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd Luminus Series Twist and Lock Operating Range Materials Temperature Limits: -65C to 125C Insulation Resistance: 5000 Megaohms Min. @ 500 VDS Dielectric Withstanding Voltage: 1000 VRMS at Sea Level 300 VRMS at 50,000 ft. Vibration: 10-2000 Hz, 15G Peak Shock: 100G Sawtooth, 6MS Current Ratings: Size 16: 13 Amps Size 20: 7.5 Amps Size 22: 5 Amps Durability: 500 Mating Cycles Temp Cycling: 5(1) Hour Cycles: -65C to 125C Thermal Shock: -65C to 200C Insulator Body: Polyamide 6/6 (Nylon) Grommet: Silicone Rubber Contact Retainers: Stainless Steel Plugs Part Number Type Color Contact Qty Contact Size Shell Size Mating Half Self-Adh Cradle Screw Mount Cradle Strain Relief SJS830250 inline black 2 22 5 SJS830270 SJS257000 n/a n/a SJS830210 inline black 3 22 5 SJS830230 SJS257000 n/a n/a SJS840310 inline & panel mount (circ) white 3 16 8 SJS840300/320 SJS445000 SJS450100 n/a SJS840340 panel alt key (circ) black 3 16 8 SJS840330/350 SJS445000 SJS450100 n/a SJS840410 inline white 4 16 8 SJS840400 SJS445000 SJS450100 n/a SJS860510 inline & panel mount (circ) white 5 22 8 SJS860500/520 SJS445000 SJS450100 n/a SJS870510* panel mount (circ) white 5 22 8 SJS870520 SJS445000 SJS450100 n/a SJS861700 inline black 6 22 7 SJS861800 SJS883000 SJS450250 SJS450300 SJS830100 inline & panel mount (sqr) black 8 22 7 SJS830200/220 SJS883000 SJS450250 SJS450300 SJS830101 inline & panel mount (sqr) green 8 22 7 SJS830201/221 SJS883000 SJS450250 SJS450300 SJS830102 inline & panel mount (sqr) yellow 8 22 7 SJS830202/222 SJS883000 SJS450250 SJS450300 SJS860100 inline white 9 16/22 8 SJS860200 SJS445000 SJS450100 n/a SJS860910 inline white 9 16/22 10 SJS860900 SJS991000 n/a n/a SJS862100 inline black 9 22 8 SJS862200 SJS445000 SJS450100 n/a SJS861100 inline white 10 16/22 10 SJS861200 SJS991000 n/a n/a SJS861300 inline white 12 22 8 SJS861400 SJS445000 SJS450100 n/a Note: SJS870510 uses pin contacts; SJS870520 uses socket contacts Accessories Amphenol Pcd Part Number Series Color Length (in) Height (in) Weight (g) Shell Size SJS257000 Self-Adhesive Cradle Black 1.033 0.645 2.5 5 SJS445000 Self-Adhesive Cradle White 1.031 0.701 2.7 8 SJS883000 Self-Adhesive Cradle Black 1.031 0.701 2.7 7 SJS991000 Self-Adhesive Cradle White 1.031 0.846 2.8 10 SJS450100 Screw Mount Cradle Black 1.033 0.982 3.3 8 SJS450250 Screw Mount Cradle Black 1.033 0.976 3.9 7 SJS450300 Strain Relief Black 0.95 0.539 0.6 7 SJS450400 Strain Relief Black 1.00 0.685 0.8 SJS8201xx & SJS8202xx 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 69 Luminus Series Twist and Lock Operating Range Temperature Limits: -65C to 125C Insulation Resistance: 5000 Megaohms Min. @ 500 VDC Dielectric Withstanding Voltage: 1500 VAC, 60Hz @ Sea Level, 5ma 300 VAC, 60Hz @ 70,000 ft, 2ma 300 VAC, 60Hz @ 100,000 ft, 2ma Vibration: 10-2000 Hz, 15G Peak, Sinusoidal 50z-2000 Hz, 16G Peak, Random Shock: 100G Sawtooth, 6MS Current Ratings: Size 16: 13 Amps Size 20: 7.5 Amps Size 22: 5 Amps Durability: 500 Mating Cycles Temp Cycling: 5(1) Hour Cycles: -65C to 125C Thermal Shock: -65C to 200C Materials Insulator Body: Polyamide 6/6 (Nylon) Grommet: Silicone Rubber Contact Retainers: Stainless Steel Inline Inline Rectangular Flange Panel Circular Flange Pegasus Receptacles Part Number Type Color Contact Qty Contact Size Shell Size Mating Half Self-Adh Cradle Screw Mount Cradle Strain Relief SJS830270 inline black 2 22 5 SJS830250 SJS257000 n/a n/a SJS830230 inline black 3 22 5 SJS830210 SJS257000 n/a n/a SJS840300 inline white 3 16 8 SJS840310 SJS445000 SJS450100 n/a SJS840350 inline alt key black 3 16 8 SJS840340 SJS445000 SJS450100 n/a SJS840320 panel mount (circ) white 3 16 8 SJS840310 SJS445000 SJS450100 n/a SJS840330 panel mount alt key (circ) black 3 16 8 SJS840340 SJS445000 SJS450100 n/a SJS840400 inline white 4 16 8 SJS840410 SJS445000 SJS450100 n/a SJS860500 inline white 5 22 8 SJS840510 SJS445000 SJS450100 n/a SJS860520 panel mount (circ) white 5 22 8 SJS840510 SJS445000 SJS450100 n/a SJS870520* panel mount (circ) white 5 22 8 SJS870510 SJS445000 SJS450100 n/a SJS861800 inline black 6 22 7 SJS861700 SJS883000 SJS450250 SJS450300 SJS830200 inline black 8 22 7 SJS830100 SJS883000 SJS450250 SJS450300 SJS830201 inline alt key green 8 22 7 SJS830101 SJS883000 SJS450250 SJS450300 SJS830202 inline alt key yellow 8 22 7 SJS830102 SJS883000 SJS450250 SJS450300 SJS830220 panel mount (sqr) black 8 22 7 SJS830100 n/a n/a n/a SJS830221 panel mount (sqr) green 8 22 7 SJS830101 n/a n/a n/a SJS830222 panel mount (sqr) yellow 8 22 7 SJS830102 n/a n/a n/a SJS860200 inline white 9 16/22 8 SJS860100 SJS445000 SJS450100 n/a SJS860900 inline white 9 16/22 10 SJS860910 SJS991000 n/a n/a SJS862200 inline black 9 22 8 SJS862100 SJS445000 SJS450100 n/a SJS861200 inline white 10 16/22 10 SJS861100 SJS991000 n/a n/a SJS861400 inline white 12 22 8 SJS861300 SJS445000 SJS450100 n/a Note: SJS870510 uses pin contacts; SJS870520 uses socket contacts 70 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Luminus Series Push and Pull Operating Range Materials Temperature Limits: -65C to 125C Insulation Resistance: 5000 M Min. @ 500 VDC Dielectric Withstanding Voltage: 1500 VRMS at Sea Level 600VAC, 60Hz @ 45,000 ft. Vibration: EIA-364D-028D, Test Condition V, E Sealing: EIA-364D-03B (55,000 ft) Flammability Rating: UL94, V0 CTI Rating: UL746B, 600V Contact Retention: EIA-364D-029B (20 lb) Insulator Body: Polyamide 6/6 (Nylon) Grommet: Silicone Rubber per A-A-59588 Contact Retainers: Stainless Steel Plugs Part Number Type Color Key Contact Qty Contact Size Shell Size Mating Half Strain Relief SJS512100 inline blue n/a 1 12 7 SJS512200 n/a SJS512110 inline alt key red n/a 1 12 7 SJS512210 n/a SJS716100 inline blue n/a 1 16 6 SJS716200 n/a SJS716100 inline alt key red n/a 1 16 6 SJS716210 n/a SJS720100 inline blue n/a 1 20 6 SJS720200 n/a SJS720110 inline alt key red n/a 1 20 6 SJS720210 n/a SJS816100 inline red A 3 16 11 SJS816200 n/a SJS816110 inline alt key white B 3 16 11 SJS816210 n/a SJS816120 inline alt key blue C 3 16 11 SJS816220 n/a SJS450400 SJS820100 inline red A 3 20 8 SJS820200 SJS820110 inline alt key white B 3 20 8 SJS820210 SJS450400 SJS820120 inline alt key blue C 3 20 8 SJS820220 SJS450400 Receptacles Part Number Type Color Key Contact Qty Contact Size Shell Size Mating Half Strain Relief SJS512200 inline blue n/a 1 12 7 SJS512100 n/a SJS512210 inline alt key red n/a 1 12 7 SJS512110 n/a SJS716200 inline blue n/a 1 16 6 SJS716100 n/a SJS716210 inline alt key red n/a 1 16 6 SJS716110 n/a SJS720200 inline blue n/a 1 20 6 SJS720100 n/a SJS720210 inline alt key red n/a 1 20 6 SJS720110 n/a SJS816200 inline red A 3 16 11 SJS816100 n/a SJS816210 inline alt key white B 3 16 11 SJS816110 n/a SJS816220 inline alt key blue C 3 16 11 SJS816120 n/a SJS820200 inline red A 3 20 8 SJS820100 SJS450400 SJS820210 inline alt key white B 3 20 8 SJS820110 SJS450400 SJS820220 inline alt key blue C 3 20 8 SJS820120 SJS450400 Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 71 Luminus Series Contacts and Accessories Dimensions Shipping Format Plating Options Durability Loose (tape & reel not included) Drawings available upon request Machined: Gold plate 50 microinches min over nickel underplate Stamped & Formed: Selective gold plate over engagement area 3-5 microinches thick over nickel underplate 500 mating cycles Material Contact Body: Copper Alloy Hood: Stainless steel Sleeve: Stainless steel Contact Matrix Contact Size 12 16 20 22D Contact Size 12 16 20 22D 72 Connector Type Currently Available Contact Style Push-Pull Twist-Lock Machined Stamped & Formed QPL Part No. (Machined Only) Pin X X CNP058365 n/a M39029/58-365 Socket n/a X CNS057359 n/a M39029/57-359 Socket-L X n/a CNS056353 n/a M39029/56-353 Pin X X CNP058364 SCP058364 M39029/58-364 Socket n/a X CNS057358 SCS057358 M39029/57-358 Socket-L X n/a CNS056352 n/a M39029/56-352 Pin X X CNP058363 SCP058363 M39029/58-363 Socket n/a X CNS057357 SCS057357 M39029/57-357 Socket-L X n/a CNS056351 n/a M39029/56-351 Pin n/a X CNP058360 n/a M39029/58-360 Socket n/a X CNS057354 n/a M39029/57-354 Wire Accommodations Size (AWG) Max Current Rating (A) 12 23 14 17 16 13 18 10 20 7.5 20 7.5 22 5 24 3 22 5 24 3 26 2 28 1.5 2014 Amphenol Pcd www.amphenolpcd.com Contact Retention Crimp Tensile Strength .012" [0,30mm] @ 30lbf [133N] 100lbf [445N] .012" [0,30mm] @ 25lbf [111N] 40lbf [180N] .012" [0,30mm] @ 20lbf [90N] 20lbf [90N] .012" [0,30mm] @ 10lbf [44N] 10 lbf [45N] Tool Information OD Range Strip Length Basic Tool Positioner Insertion/Removal Tool .097 - .142" [2,46 - 3,61mm] .209 - .240" [5,31 - 6,10mm] M22520/1-01 M22520/1-04 (Yellow) M81969/14-04 .065 - .109" [1,65 - 2,77mm] .209 - .240" [5,31 - 6,10mm] M22520/1-01 M22520/1-04 (Blue) .040 - .083" [1,02 - 2,11mm] .209 - .240" [5,31 - 6,10mm] .030 - .054" [0,76 - 1,37mm] .141 - .172" [3,58 - 4,37mm] info@amphenolpcd.com M22520/7-01 M22520/7-04 M22520/1-01 M22520/1-04 (Red) M22520/2-01 M22520/2-10 M22520/7-01 M22520/7-08 M22520/2-01 M22520/2-06 M22520/7-01 M22520/7-06 1(978) 624-3400 M81969/14-03 M81969/14-11 M81969/14-01 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Crimp Removable Socket Contacts MIL-C-39029/5, MIL-C-39029/101 Materials Body: Copper Alloy, Hard Gold Plated per MIL-G-45204 Hood: Stainless Steel Passivated Performance Performance in accordance with SAE-AS39209 and related specifications Contacts By Relay Socket M39029/5 Contacts Used with M12883/40, /41, /47, & /48 Relay Sockets M39029/101 Contacts Used with M12883/44, /45, /46, & /52 Relay Sockets M39029/5 Contact Dimensions M39029/101 Contact Dimensions 1st 1st A B A B 2nd 3rd 3rd 2nd 3rd A (Max.) B (Max.) .103 Contact Design Characteristics Bin Code Military P/N APCD P/N Pin Size Wire Size 116 M39029/5-116 CNS511600 16 117 M39029/5-117 CNS511700 16 118 M39029/5-118 CNS511800 119 M39029/5-119 552 Color Bands 1st 2nd 16 Brown Brown Blue .113 20 Brown Brown Violet .113 .078 12 12 Brown Brown Grey .161 .151 CNS511900 12 16 Brown Brown White .161 .103 M39029/101-552 CNS101552 22 22 Green Green Red .060 .048 553 M39029/101-553 CNS101553 20 20 Green Green Orange .076 .070 554 M39029/101-554 CNS101554 16 16 Green Green Yellow .108 .103 M39029/5 Contacts M39029/101 Contacts Contact Installation Tooling Bin Code Basic Crimping Tool Positioner Installing Tool Wired Contact Removal Tool M39029/5 Contacts 116 M22520/1-01, M22520/7-01 M22520/1-02 Blue or M22520/7-03 M81969/14-03 M81969/14-03 117 M22520/1-01, M22520/7-01 M22520/1-02 Blue or M22520/7-03 M81969/14-02 M81969/14-02 118 M22520/1-01 M22520/1-02 Yellow M81969/14-04 M81969/14-04 119 M22520/1-01 M22520/1-02 Yellow M81969/14-03 M81969/14-03 M39029/101 Contacts Amphenol Pcd 552 M22520/7-01 M22520/7-11 M81969/16-04 M81969/16-04 553 M22520/7-01 M22520/7-12 M81969/16-01 M81969/16-01 554 M22520/7-01 M22520/7-13 M81969/16-03 M81969/16-02 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 73 Crimp Removable Socket Contacts MIL-C-39029/1, MIL-C-39029/22 Performance Materials Performance in accordance with SAE-AS39209 and related specifications Body: Copper Alloy, Hard Gold Plated per MIL-G-45204 Hood: Stainless Steel Passivated Contacts By Modules M39029/1 contacts used with M81714 Series I, TJE, TJSE, TJHD, and TJM Modules M39029/22 contacts used with M81714/60, /61, /63, Series II Socket Junction Modules M39029/1 Contact Dimensions M39029/22 Contact Dimensions 1st 1st A A B B 2nd 3rd 3rd 2nd Contact Design Characteristics Bin Code Military P/N APCD P/N Pin Size Wire Size Color Bands 1st 2nd 3rd A (Max.) B (Max.) M39029/1 Contacts 100 M39029/1-100 CNP068000 16 22 Brown Black Black .062 .051 101 M39029/1-101 CNP006000 16 20 Brown Black Brown .063 .078 102 M39029/1-102 CNP037000 14 16 Brown Black Red .078 .105 103 M39029/1-103 CNP072000 12 12 Brown Black Orange .095 .153 507 M39029/1-507 CNP022507 20 22D Green Black Violet .041 .048 M39029/22 Contacts 191 M39029/22-191 CNS113900 22 22 Brown White Brown .060 .048 192 M39029/22-192 CNS070900 20 20 Brown White Red .076 .070 193 M39029/22-193 CNS072900 16 16 Brown White Orange .108 .103 605 M39029/22-605 CNS123900 12 12 Blue Black Green .168 .152 Contact Installation Tooling Bin Code Basic Crimping Tool Positioner Installing Tool Wired Contact Removal Tool M39029/1 Contacts 100 M22520/2-01 M22520/2-11 M81969/14-02 M81969/14-02 101 M22520/1-01, M22520/2-01 M22520/1-02 Red, M22520/2-11 M81969/14-02 M81969/14-02 102 M22520/1-01 M22520/1-02 Blue M81969/14-03 M81969/14-03 103 M22520/1-01 M22520/1-02 Yellow M81969/14-04 M81969/14-04 507 M22520/2-01 M22520/2-32 M81969/14-01, or/1-04 or /8-01 or /8-02 M81969/14-01, or/1-04 or /8-01 or /8-02 191 M22520/7-01 M81969/7-11 M81969/14-01 M81969/14-01 192 M22520/7-01 M22520/7-12 M81969/14-10 M81969/14-10 193 M22520/7-01 M22520/7-13 M81969/14-03 M81969/14-03 605 M22520/1-01 Daniels, TH343 or TP405 M81969/16-03 M81969/16-03 M39029/22 Contacts 74 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Crimp Removable Socket Contacts MIL-C-39029/92 Materials Body: Copper Alloy, Hard Gold Plated per MIL-G-45204 Hood: Stainless Steel Passivated Performance Performance in accordance with SAE-AS39209 and related specifications Contacts By Relay Socket M39029/92 contacts used with M12883/40, /41, /47, /48, /54, /55 Relay Sockets M39029/92 Contact Dimensions 1st A B 2nd 3rd Contact Design Characteristics Bin Code Military P/N APCD P/N Pin Size Wire Size Color Bands 1st 2nd 3rd A (Max.) B (Max.) .053 M39029/92 Contacts 531 M392029/92-531 CNS115900 22 22 Green Orange Brown .062 532 M392029/92-532 CNS074900 20 20 Green Orange Red .078 .078 533 M392029/92-533 CNS126900 16 16 Green Orange Orange .113 .103 .078 534 M392029/92-534 CNS127900 16 20 Green Orange Yellow .113 535 M392029/92-535 CNS128900 12 12 Green Orange Green .161 .151 536 M392029/92-536 CNS129900 12 16 Green Orange Blue .161 .103 Contact Installation Tooling Bin Code Basic Crimping Tool Positioner Installing Tool Wired Contact Removal Tool M39029/92 Contacts 531 M22520/2-01 Daniels K1561 M81969/8-03, /14-01 M81969/8-04, /14-01 532 M22520/1-01, M22520/201, M22520/7-01 M22520/1-02 Red, M22520/2-02, M22520/7-02 M81969/8-05, /14-02 M81969/8-06, /14-02 533 M22520/1-01 or M22520/7-01 M22520/1-02 Blue or M22520/7-03 M81969/8-07, /14-03 M81969/8-08, /14-03 534 M22520/1-01 or M22520/7-01 M22520/1-02 Blue or M22520/7-03 M81969/8-07, /14-03 M81969/8-08, /14-03 535 M22520/1-01 M22520/1-02 Yellow M81969/8-09, /14-04 M81969/8-10, /14-04 536 M22520/1-01 M22520/1-02 Yellow M81969/8-09, /14-04 M81969/8-10, /14-04 Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 75 System Attachments Designed to secure, guide, and manage cable harnesses through aircraft and vehicles, Amphenol Pcd's System Attachments were engineered with strength, stability, and weight reduction in mind. Designed for lean manufacturing, our System Attachments are rugged and durable - able to withstand high vibration and shock, and non-conductive/non-corrosive - able to withstand many harsh environments. Based on the requirement, there are many styles and materials to choose from. P-Clamps & Omega Clamps LDG Clamps C-Clamps Stringer Clips Supports & Strips Jig Board Clamps Fairlead Blocks Standoffs Applications * Wire Bundle and Cable Management * Aircraft Fuel Tank * Aircraft Insulation * Hydraulic Tubing * IFE and Galley * Instrumentation * Aircraft Power Distribution * Weapon Systems * Oil and Gas * Radio/Datalink/Antenna/C4I * Shelter Power Management * Actuation and Sensors * Railway * RF & Fiber Optic Cables 76 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd System Attachments High Performance P-Clamps Performance Materials Temperature Limits: Continuous: -65F to 350F Excursions: Up to 260C (500F) Flammability: UL94, V0, FAR25.853 Clamp Base: Polyetheretherketone (PEEKTM) Per MIL-P-46183 Overmolding: Silicone Rubber per ASTM-D-2000 Product Description High Performance P-Clamps are designed to replace and outperform traditional clamps. Consisting of PEEKTM polymer and featuring an over-molded silicone cushion, these clamps are completely non-corrosive and non-conductive. They are designed to be lighter than traditional P-Clamps, are equipped with a locking feature to streamline installation, and are available in 15 different sizes. Alternate cushioning material is available upon request, including Fluorosilicone for fuel tank applications and fiber optic cables. High Performance P- Clamp Dimensions Bottom View Side View OD .315 .300 H .600 T O.200 F L High Performance P-Clamps Part Number Amphenol Pcd Inner Cushion Diameter F L H Weight (lbs) T per 100 Clamps Weight (grams) per 100 Clamps Inch cm Inch cm Inch cm Inch cm Inch cm PCL150101 0.12 0.32 0.59 1.51 1.18 2.99 0.64 1.62 0.18 0.46 0.9 408 PCL150102 0.22 0.56 0.64 1.63 1.27 3.22 0.71 1.80 0.18 0.46 1.0 454 PCL150103 0.31 0.79 0.71 1.81 1.41 3.59 0.82 2.07 0.24 0.61 1.4 635 PCL150104 0.41 1.03 0.76 1.93 1.51 3.83 0.88 2.25 0.24 0.61 1.5 680 PCL150105 0.50 1.27 0.81 2.05 1.60 4.07 0.92 2.33 0.24 0.61 1.7 771 PCL150106 0.59 1.51 0.85 2.17 1.69 4.31 1.05 2.68 0.24 0.61 1.8 816 PCL150107 0.69 1.75 0.93 2.35 1.84 4.67 1.20 3.05 0.30 0.76 2.4 1089 PCL150108 0.78 1.99 0.97 2.47 1.93 4.91 1.32 3.35 0.30 0.76 2.7 1225 PCL150109 0.88 2.22 1.02 2.59 2.03 5.15 1.39 3.53 0.30 0.76 2.8 1270 PCL150110 0.97 2.46 1.07 2.71 2.12 5.38 1.48 3.76 0.30 0.76 3.0 1361 PCL150111 1.06 2.70 1.14 2.89 2.26 5.75 1.62 4.12 0.36 0.91 3.7 1678 PCL150112 1.16 2.94 1.18 3.01 2.36 5.99 1.75 4.46 0.36 0.91 4.0 1814 PCL150113 1.25 3.18 1.23 3.13 2.45 6.23 1.82 4.63 0.36 0.91 4.2 1905 PCL150114 1.34 3.41 1.29 3.28 2.57 6.54 1.93 4.91 0.40 1.00 4.7 2132 PCL150115 1.44 3.65 1.35 3.43 2.69 6.83 2.05 5.20 0.42 1.07 5.3 2404 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 77 System Attachments High Performance Omega Clamps Performance Materials Temperature Limits: Continuous: -65F to 350F Excursions: Up to 260C (500F) Flammability: UL94, V0, FAR25.853 Clamp Base: Polyetheretherketone (PEEKTM) Per MIL-P-46183 Overmolding: Silicone Rubber per ASTM-D-2000 Product Description High Performance Omega Clamps are designed to replace and outperform traditional clamps. Consisting of PEEKTM polymer and featuring an over-molded silicone cushion, these clamps are completely non-corrosive and non-conductive. High Performance Omega Clamps are designed to be lighter than traditional Clamps and are equipped with a locking feature to streamline installation. Alternative cushioning material is available upon request, including Fluorosilicone. This product is available in 20 different sizes. Omega Clamp Dimensions Bottom View Side View OD .326 2X .315 2X H .300 2X .600 O.200 2X E 2X F 2X L High Performance Omega Clamps Part Number 78 APCD Diameter Inch cm L Inch F cm Inch H cm C E Inch cm Inch cm Inch cm Weight (lbs) Weight (grams) per 100 Clamps per 100 Clamps PCL250008 0.45 1.14 2.19 5.56 0.78 1.98 0.91 2.31 1.56 3.96 0.20 0.51 2.0 907 PCL250009 0.51 1.30 2.25 5.72 0.81 2.06 0.97 2.46 1.62 4.11 0.20 0.51 2.1 952 PCL250010 0.57 1.45 2.31 5.87 0.84 2.13 1.03 2.62 1.68 4.27 0.20 0.51 2.2 997 PCL250011 0.63 1.60 2.42 6.15 0.89 2.26 1.14 2.90 1.79 4.55 0.25 0.64 2.9 1315 PCL250012 0.70 1.78 2.49 6.32 0.93 2.36 1.21 3.07 1.86 4.72 0.25 0.64 3.0 1360 PCL250013 0.77 1.96 2.56 6.50 0.96 2.44 1.28 3.25 1.93 4.90 0.25 0.64 3.2 1451 PCL250014 0.83 2.11 2.62 6.65 1.00 2.54 1.34 3.40 1.99 5.05 0.25 0.64 3.3 1496 PCL250015 0.89 2.26 2.68 6.81 1.03 2.62 1.40 3.56 2.05 5.21 0.25 0.64 3.4 1542 PCL250016 0.95 2.41 2.79 7.09 1.08 2.74 1.51 3.84 2.16 5.49 0.30 0.76 4.2 1905 PCL250017 1.01 2.57 2.85 7.24 1.11 2.82 1.57 3.99 2.22 5.64 0.30 0.76 4.4 1995 PCL250018 1.07 2.72 2.91 7.39 1.14 2.90 1.63 4.14 2.28 5.79 0.30 0.76 4.5 2041 PCL250019 1.13 2.87 2.97 7.54 1.17 2.97 1.69 4.29 2.34 5.94 0.30 0.76 4.7 2131 PCL250020 1.20 3.05 3.07 7.80 1.22 3.10 1.79 4.55 2.44 6.20 0.33 0.84 5.3 2404 PCL250021 1.26 3.20 3.10 7.87 1.24 3.15 1.82 4.62 2.47 6.27 0.30 0.76 5.0 2268 PCL250022 1.33 3.38 3.17 8.05 1.27 3.23 1.89 4.80 2.54 6.45 0.30 0.76 5.2 2358 PCL250023 1.39 3.53 3.23 8.20 1.30 3.30 1.95 4.95 2.60 6.60 0.30 0.76 5.3 2404 PCL250024 1.45 3.68 3.29 8.36 1.33 3.38 2.01 5.11 2.66 6.76 0.30 0.76 5.4 2449 PCL250025 1.51 3.84 3.35 8.51 1.36 3.45 2.07 5.26 2.72 6.91 0.30 0.76 5.6 2540 PCL250026 1.57 3.99 3.41 8.66 1.39 3.53 2.13 5.41 2.78 7.06 0.30 0.76 5.7 2585 PCL250032 1.95 4.95 3.82 9.70 1.60 4.06 2.54 6.45 3.19 8.10 0.33 0.84 7.3 3311 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd System Attachments LDG P-Clamps The LDG P-Clamps are the result of continuous Amphenol development of overmold technology - an engineering/ manufacturing process that is a major strength of the company. Through the perfection of this technology, engineering is able to use a softer rubber for the clamp cushioning, thereby reducing wear and tear on mission critical cable harnesses - all without compromising the strength and performance of the clamp itself. Specifically designed for the high performance aerospace cables, such as the MT/MTL product lines, the LDG P-Clamps are easy to use, simple to maintain, and are available in 17 different sizes. Feature and Benefits Smart Engineering * High Performance - Specifically designed for MIL TECH transmission lines - Compatible with cables between 0.06"-1.65" - Helps ensure no interruption of data or signal transfer - Dedicated to pressurized and unpressurized areas - Smaller envelope than existing metal P-Clamps * Mechanical Design - Lock open & close feature increases ease of installation & maintenance - Available in 17 different sizes - Easily recognizable labels makes inspection easy - Uses standard 10-32 screws Overmold Technology * Over 30 years experience in overmold technology * Cushion will not come off or slide off * Each clamp able to meet wide range of diameter sizes Victrex PEEKTM Polymer * High temperature resistance; chemical resistance * Completely non-corrosive and non-conductive * Improved strength and stability * Withstands constant vibrations and shock loads * Lighter than traditional P-clamps by up to 40% Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 79 System Attachments LDG P-Clamps Materials Clamp Base: Polyetheretherketone (PEEKTM) Per MIL-P-46183; Black Cushion: Silicone Rubber; 20 Durometer Shore A; Light Green Performance Temperature Limits: Continuous: -65F to 350F Excursions: Up to 260C (500F) Flammability: Clamp Base: UL94, V0, FAR25.853 Cushion: Meets UL 94, HB LDG P-Clamp Dimensions Bottom View Side View LDG P- Clamps Part Number Size No. Nom: Inner Cushion dia. (OD) Min. Cable Size Inch cm Inch cm Inch cm Inch cm Inch cm Inch cm Inch cm Max. Cable Size F Length (L) H T Weight (lbs) Weight (grams) per 100 Clamps per 100 Clamps PCL400100 100 0.030 0.076 0.060 0.152 0.190 0.483 0.59 1.51 1.18 2.99 0.64 1.62 0.18 0.46 0.9 430 PCL400101 101 0.125 0.318 0.155 0.394 0.248 0.630 0.59 1.51 1.18 2.99 0.64 1.62 0.18 0.46 0.9 408 PCL400102 102 0.219 0.556 0.249 0.632 0.342 0.869 0.64 1.63 1.27 3.22 0.71 1.80 0.18 0.46 1.1 499 PCL400103 103 0.313 0.795 0.343 0.871 0.436 1.107 0.71 1.81 1.41 3.59 0.81 2.06 0.24 0.61 1.5 681 PCL400104 104 0.407 1.034 0.437 1.110 0.530 1.346 0.76 1.93 1.51 3.83 0.88 2.25 0.24 0.61 1.7 771 862 PCL400105 105 0.501 1.273 0.531 1.349 0.623 1.582 0.81 2.05 1.60 4.07 0.96 2.44 0.24 0.61 1.9 PCL400106 106 0.594 1.509 0.624 1.585 0.718 1.824 0.85 2.17 1.70 4.32 1.05 2.68 0.24 0.61 2.1 953 PCL400107 107 0.689 1.750 0.719 1.826 0.811 2.060 0.93 2.35 1.84 4.67 1.20 3.05 0.30 0.76 2.6 1180 PCL400108 108 0.782 1.986 0.812 2.062 0.905 2.299 0.97 2.47 1.93 4.91 1.32 3.35 0.30 0.76 2.9 1316 PCL400109 109 0.876 2.225 0.906 2.301 0.998 2.535 1.02 2.59 2.03 5.15 1.39 3.53 0.30 0.76 3.1 1407 PCL400110 110 0.969 2.461 0.999 2.537 1.092 2.774 1.07 2.71 2.12 5.38 1.48 3.76 0.30 0.76 3.3 1498 PCL400111 111 1.063 2.700 1.093 2.776 1.186 3.012 1.14 2.89 2.26 5.75 1.62 4.12 0.36 0.91 4.0 1816 PCL400112 112 1.157 2.939 1.187 3.015 1.280 3.251 1.18 3.01 2.36 5.99 1.76 4.47 0.36 0.91 4.4 1997 PCL400113 113 1.251 3.178 1.281 3.254 1.373 3.487 1.23 3.13 2.45 6.23 1.82 4.63 0.36 0.91 4.6 2088 PCL400114 114 1.344 3.414 1.374 3.490 1.467 3.726 1.29 3.28 2.58 6.55 1.93 4.91 0.40 1.00 5.2 2360 PCL400115 115 1.438 3.653 1.468 3.729 1.561 3.965 1.35 3.43 2.69 6.83 2.05 5.20 0.42 1.07 5.7 2587 PCL400116 116 1.532 3.891 1.562 3.967 1.655 4.204 1.39 3.53 2.78 7.06 2.14 5.43 0.42 1.07 5.8 2604 80 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd System Attachments C-Clamps Fluid Resistance Materials Brown Version: NATO F44, AS 1241, MIL PRF 680 (type 1), 5606, 7870, 23699, 87937 (diluted), 87252 and AMS1428 Blue Version: Resistant in complete immersion during 96h Black thermoplastic Elastomer Protection: Fluorosilicone Performance Temperature Limits: Continuous: -55C to 150C Flammability: Conform to ABD031 Standard Mechanical Shocks: 6g in 3 axis, during 11 ms Vibrations: RTCA/DO-160 curve C and E Product Description Cable Clamps provide routing, support, and fixing of cable harnesses of various diameters. They are typically used in an aircraft wing's section, in the fuselage for power and electrical cables, as well as inside the cabin for in-flight entertainment or cabin service systems. Different materials and configurations are available depending on temperature and routing of the conduits. This includes versions for use inside the fuel tank. LDG P-Clamp Dimensions Bottom View Side View Opening View Coupe D - D Coupe C - C D .25 H .216 C C diameter .0 78 .078 diameter 5 +0,3 -0 196 +.011 -0 C D L D E .57 C-Clamps AALBF P/N Standard Color 003262 101 00 ABS 1339 D01 Brown 003262 111 00 ABS 1339 F01 Blue 003262 102 00 ABS 1339 D02 Brown 003262 112 00 ABS 1339 F02 Blue 003262 103 00 ABS 1339 D03 Brown 003262 113 00 ABS 1339 F03 Blue 003262 104 00 ABS 1339 D04 Brown 003262 114 00 ABS 1339 F04 Blue 003262 105 00 ABS 1339 D05 Brown 003262 115 00 ABS 1339 F05 Blue 003262 106 00 ABS 1339 D06 Brown 003262 116 00 ABS 1339 F06 Blue 003262 107 00 ABS 1339 D07 Brown 003262 117 00 ABS 1339 F07 Blue 003262 108 00 ABS 1339 D08 Brown 003262 118 00 ABS 1339 F08 Blue Cable Allowable Center to Center Length Height Thickness Weight Inch Inch Inch Inch Inch Grams 01 0.2 to 0.28 0.67 1.37 0.61 .14 2.1 02 0.28 to 0.4 0.73 1.49 0.74 .14 2.5 03 0.4 to 0.55 0.80 1.63 0.91 .14 3.2 04 0.55 to 0.77 0.91 .87 1.14 .14 4.0 05 0.77 to 1.05 1.05 2.14 1.42 .14 5.3 06 1.05 to 1.38 1.22 2.47 1.77 .23 8.3 07 1.38 to 1.77 1.42 2.85 2.16 .33 11.5 08 1.55 to 1.88 1.57 2.86 2.50 .32 14.6 Size General tolerance according to JS15, weight 10 % Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 81 System Attachments High Performance Standoffs Features and Benefits * Completely Non-Conductive & Non-Corrosive * High Strength PEEK * Lightweight * Riveted or Bolted options * Locking feature on thread * Designed with ribs for additional strength * Multiple sizes available * Aluminum Standoff capability Product Description Dimensions Designed to help guide wire bundles throughout Side View Side View the aircraft, Amphenol Pcd's High Performance Standoffs were designed with strength, stability, and weight reduction in mind. Our standoffs are made with PEEK, a very strong non-conductive/ non-corrosive, and lightweight material. They come with a locking feature for security, are designed with ribs to provide additional strength, and support a wide range of clamp sizes and raceways for added convenience. Bottom View Bottom View Dimension Chart 82 2014 Amphenol Pcd Dimension Chart APCD P/N Height Inch APCD P/N Length "A" Inch ALBSTO-051-03 0.30 ALBSTO-002-02 0.54 ALBSTO-051-04 0.40 ALBSTO-002-04 0.74 ALBSTO-051-06 0.60 ALBSTO-002-06 0.94 ALBSTO-051-08 0.80 ALBSTO-002-08 1.14 ALBSTO-051-10 1.00 ALBSTO-003-10 1.34 ALBSTO-051-12 1.20 ALBSTO-003-12 1.54 ALBSTO-051-14 1.40 ALBSTO-003-14 1.74 ALBSTO-051-16 1.60 ALBSTO-003-16 1.94 ALBSTO-051-18 1.80 ALBSTO-003-18 2.14 ALBSTO-051-20 2.00 ALBSTO-003-20 2.34 ALBSTO-003-22 2.54 ALBSTO-003-24 2.74 www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 Thickness "B" Inch 0.16 0.175 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd System Attachments Fairlead Blocks Features and Benefits Product Description * Strong and Durable * Can accommodate wide range of tube diameters * Various materials available * Designed to prevent wire/tube chaffing * Protects wires/tubes against surges and harsh vibration * Captive rail design; No loose parts * Custom design available * 24/7 engineering capabilities; quick turn-around time Amphenol Pcd's Fairlead Blocks designed to ensure that pipes and tubes are properly secured throughout their entire length. They provide stability against surges and vibration, and are developed with material that prevents chaffing. Amphenol's engineering experience enables the company to develop blocks that accommodate a wide range of tube diameters, and the products have no loose parts - reducing weight and the likelihood of FOD. Marking Marking Top Rail Top Rail Grounding Blocks Blocks Spacers Spacers Bottom Rail Rails/Spacers Specifications Materials Coating Application Aluminum Alloy 6061-T6 or 2024-T3 Chemical Conversion Coating per Mil-C-5541 Class 1A Light Duty Stainless Steel per ASTM A109 Cadmium Plate per QQ-P416, TYPE II Class 1 Carbon Fiber Composite High Performance Contact Amphenol for availability and information. Cushion Block Specifications Materials Amphenol Pcd Specifications Ethylene Propylene Rubber (EPR ) Temperature Range: -65F - 275F Color: Purple Duro: 55-75 Standard usage: Commercial Aircraft -- especially in areas contaminated with Skydrol Nitrile Butadienn e (Buna-N ) Temperature Range: -65F - 275F Color: Black Duro: 55-75 Standard usage: fuel tank applications Silicone Temperature Range: -65F - 275F Duro: 55-75 Standard usage: fire resistant, low smoke density, low toxicity requirements Fluoro-Silicone Temperature Range: -65F - 500F Duro: 55-75 Standard usage: High temperature areas; engine applications 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 83 System Attachments Wiring Accessories: Stringer and Frame Clips Features and Benefits * Easy to install * Simplifies wire harness installation * Lightweight * Durable * No loose hardware/No FOD * Multiple colors available-helps identify different sizes * Customization * FAR25-853 compliance Product Description Stringer and Frame Clips are offered in multiple materials and are designed for use in airframe, fuel tank, and engine applications. Available in various standard configurations and sizes, Amphenol Pcd also provides customized clips to help meet specific customer requirements. This combination of customer attention and low-cost manufacturing makes Amphenol Stringer and Frame Clips the best available option for customer needs. "L" Frame "U" Frame Bulb Stringer Heads/Wire Bundle Interface Materials Nylon 6/6 (PA) Ultem (PEI) PEEK 84 2014 Amphenol Pcd * * * * * * * Polyamide 6/6 Resin - Nylon Zytel Grade : 103HSL (Heat Stabilized) Temperature Performance: - 65 F to 185 F Very flexible Can be used in a clipping system Available with glass for higher strength requirements Excellent chemical resistance to most aerospace fluids * * * * High mechanical strength Available with glass for higher strength requirements Excellent chemical resistance to most aerospace fluids High temperature resistance * *Except for Skydroll under excessive strain * * * * * * Victrex PEEK polymer High Performance Non Conductive Non-Corrosive Extremely Durable High Temperature resistance www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd System Attachments Wiring Accessories: Supports and Strips Features and Benefits * Simplifies wire bundle installation & maintenance * Multiple fixing points offer convenience and ease of use * One-Piece design simplifies installation and inventory management * New generation of very low profile cable support * Variety of sizes to accommodate * Variety of sizes to accommodate different cable routing requirements * Uses standard tie-wraps * Lightweight and Durable * Replacement for aluminum Z-brackets * Cost-Effective Product Description Designed to secure and guide wire bundles throughout the aircraft, Amphenol Pcd's Raceways were designed with lean manufacturing and durability in mind. Built in a one-piece, lightweight design with multiple fixing points, our raceways are strong, durable, and make wire bundle installation and maintenance easy. Our Harness Supports were developed to secure large bundles and high loads, while our Hat Supports were developed to support a wide range of load requirements. Our Spacer Strips were designed to separate wire bundles a specific distance from one another, while our low-profile Tie-Down Strips secure bundles directly to the structure. Material Specifications Material Temperature Range Flammability Polyamide 6/6 (Nylon) -55C to 150C FAR 25.853 Technical Specifications Parts Application Maximum Weight 27.3 g--72.6 g (0.06 lbs--0.16 lbs) Harness Supports To accommodate large bundles and high loads Spacer Strips To separate wire bundles a specific distance from one another Hat Supports To accommodate a wide range of load requirements Tie-Down Strips To fix cables directly to the structure (low profile) Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com n/a 32.9 g--65.7 g (0.72 lbs--0.145 lbs) n/a 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 85 System Attachments Jig Board Clamps Features and Benefits * Easy to use * Smooth edges * Various sizes * Durable * No elastic band or straps required Product Description Designed for pre-installation wire harness assembly, the Jig Board Clamps from Amphenol Pcd outlast and outperform other jig board clamping devices in the market. Made of Acetal, our durable clamps maintain their original shape after continued use, yet the smooth design of their edges diminish wear on the harnesses as they're being assembled. Developed in multiple sizes, our Jig Board Clamps can accommodate a wide range of cable diameters, while the one-piece design enables efficient inventory management. Amphenol Pcd's clamps make wire harness assembly simple and convenient saving both time and money. A A B B C C Amphenol Part Number OA B C ALBCLP -001 -05 0.50" 1.85" 0.375'' ALBCLP -001 -06 1.25" 2.81" 0.625'' ALBCLP -001 -07 ALBCLP -001 -08 2.00" 0.88" 3.80" 2.36" 0.625'' 0.500'' 2014 Amphenol Pcd www.amphenolpcd.com OA B C ALBCLP -001 -01 0.50" 1.85" 0.375'' ALBCLP -001 -02 1.25" 2.81" 0.625'' ALBCLP -001 -03 2.00" 3.80" 0.625'' ALBCLP -001 -04 0.88" 2.36" 0.500'' Material: Acetal Screw: 10/32 Material: Acetal Screw: 10/32 86 Amphenol Part Number info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd System Attachments Customization About Customization In addition to Amphenol Pcd's extensive System Attachment product line, custom solutions are available as well. We offer many different materials, such as thermoplastics, elastomers, and metals. We also offer different manufacturing processes to meet the particular requirement. Also, our engineering team prides itself on smart designs, creating cost-effective products that always meet and/or exceed customer expectations. This page provides a snapshot of some of the custom solutions we offer. Materials * * Thermoplastics * * * Elastomers * * Metals * Typical materials include Nylon (PA), PEEK, Ultem (PEI), Torlon (PAI) Thermoplastics may be reinforced with glass-fiber or carbon-fiber, drastically increasing strength and stiffness. Resulting parts can be made lighter due to higher strength-to-weight ratio Injection molded parts may incorporate features that are impossible to replicate with typical metal forming processes. Snapping features and tool-less assembly can reduce installation time and promote lean manufacturing Thermoplastic parts do not corrode and thus do not require additional plating or coating Amphenol has compression molding capabilities to produce rubber products in most common aerospace elastomers: * EPDM per AMS3248 and AMS3253 for Phosphate Ester Hydraulic Fluid (Skydrol) environment * Nitrile (NBR) per AMS3213, AMS3215, and Mil-DTL-85052/1 for oil or fuel environment * Chloroprene per AMS3209 * Silicone rubber per A-A-59588, AMS3302, AMS3303, and AMS3310 * Fluorosilicone per Mil-DTL-25988 for fuel environment Amphenol can overmold silicone and fluorosilicone onto thermoplastics for a permanent and durable bond between rubber and plastic components. Stainless steel and aluminum parts can be produced through typical methods including conventional and CNC machining, sheet forming, etc. Available coatings for metal components include chemical film, anodizing, cadmium plating, passivation, painting, and more. Engineering Amphenol offers a unique expertise in the design of thermoplastic aerospace components with a notable focus on Lean Manufacturing. Core values when designing new products are innovation, performance, weight, and cost-efficiency. Engineering capabilities include: * Custom design of plastic parts from concept generation to production * Part optimization for plastic production * Finite Element Analysis (FEA) * Testing and qualification. Access to A2LA-certified laboratory with capabilities for: * Load testing at ambient, low, and high temperatures * Vibration * Chemical resistance * Thermal shock * Thermal cycling * Temperature and humidity conditioning * AS9100 quality system * Customer technical support Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 87 Galley Connectors Intermateable and interchangeable with other ARINC 810 galley connectors, Amphenol Pcd's APeX Galley Connector, Rectangular is a reliable, robust, connector that uses overmold technology to set it apart from the rest. Key Features and Benefits Intermateable and Interchangeable Ability to mate with other ARINC 810 galley connectors in the market Blind-Mate Connection Guide pin feature enables quick and simple mating Overmold Technology Enables exceptional sealing that improves safety and reliability Intuitive and Ergonomic Smooth, low insertion force to mate connector 88 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd APex Galley Connector, Rectangular Plug Item 1 Plug shell assembly 2&3 25 socket insert with twinax seal 6 socket insert Part Material Strain relief PEI thermoplastic 40% carbon fiber Retention nut Stainless steel per AISI 316, passivated Male fastener body Stainless steel per AISI 316, passivated Insert retention clip Copper alloy per ASTM B194 Float -mounted eyelet Stainless steel per AISI 316, passivated Float -mounted spring Stainless steel per AISI 302, passivated Shell Aluminum allow 6061T651 per AMS-QQ -A-250/11, electroless nickel per Mil-C-26074 0.001 inch min Protective cap EPDM elastomer per ASTM D3568 Housing Polyethermide thermoplastic per ASTM D5205 Retention clips PEEK thermoplastic per Mil-P-46183 Grommet Silicone elastomer per ASTM-D-2000 Twinax seal housing Polyethermide thermoplastic per ASTM D5205 Twinax seal grommet Silicone elastomer per A -A-59588A cl ass 3B 4 Insertion/Removal tool Tool Stainless steel per AISI 301 5 & 6 Socket contact size 12 Socket contact size 22 Body Copper alloy per ASTM B196, gold plate per AMS2422, 50 microinches min. over nickel plate, 40 to 200 microinches per QQ -N-290 Sleeve Stainless steel per AISI 305 per ASTM A 580, passivated Outer and Inner contacts Copper alloy per ASTM B196, gold plated per Mil-G -45204, 50 microinch min. over nickel plate per QQ -N-290, 50 microinch min Shield ferrule Brass per ASTM B453, gold plated per Mil -G -45204, 50 microinch min. over nickel plate per QQ -N-290, 50 microinch min 7 Socket twinax contact size 8 Front insulator and spacer insulator TFE thermoplastic per AMS 3651 Sealing plug PTFE thermoplastic per ASTM - D1710 8 Sealing plug Plug Part Numbers and Description Amphenol Pcd KIT P/N Item Amphenol Pcd P/N Description APX2A801K APX2A801C APX2A801G APX2A801S1 APX2A801S2 APX2A801S3 APX2A801S2K 1 APX2BL00N Plug Shell Assembly with Protective Cap QTY/Assy QTY/Assy QTY/Assy QTY/Assy QTY/Assy QTY/Assy QTY/Assy 1 1 1 1 1 1 1 2 APXM25QSA 25 Socket Insert Polarization A with Twinax Seal 1 1 1 1 0 1 0 3 APXM006SB 6 Socket Insert Polarization B 1 1 1 1 1 1 1 4 APXIN 0001 Blank Insert 0 0 0 0 1 0 1 5 CNS812100 APeX Socket Contact Size 12 0 6 6 6 6 6 0 6 CNS822100 APeX Socket Contact Size 22 0 15 15 0 0 24 0 7 CNS882100 APeX Socket Twinax Contact Size 8 0 1 0 0 0 0 0 8 CNA032401 Sealing Plug Size 22 0 9 9 0 0 0 0 Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 89 APex Galley Connector, Rectangular Receptacle 1 PROTECTIVE CAP Amphenol PCD APX2 AROON XXXX 4 3 2 TWINAX SEAL 5 6 8 Item 1 Receptacle shell assembly 2&3 25 pin insert with twinax seal 6 pin insert Part Material Shell Aluminum alloy 6061T651 per AMS -QQ -A-250/11 electroless nickel per MIL-C-26074 .001 inch min Retention nut Stainless steel per AISI 316, passivated Guide sleeve Stainless steel per AISI 316, passivated Insert retention clip Copper alloy per ASTM B194 Protective cap EPDM elastomer per ASTM D3568 Housing Polyetherimide thermoplastic per ASTM D5205 Retention clips Peek thermoplastic per MIL-P-46183 Grommet Silicone elastomer per ASTM-D-2000 Twinax seal housing Polyetherimide thermoplastic per ASTM D5205 Twinax seal grommet Silicon elastomer per A -A-59588A class 3B 4 Insertion/removal tool Tool Stainless steel per AISI 301 5 & 6 Pin contact size 12 Pin contact size 22 Contact Copper alloy C97, gold plate per AMS 2422 50 microinches min over nickel per AMS 2403 40-200 microinches min Outer & inner contacts Copper alloy per ASTM B196, gold plated per Mil-G -45204 50 microinch min. over nickel plate per QQ -N-290 50 microinch min. Shield ferrule Brass per ASTM B453, gold plated per MIL-G -45204 50 microinch min. over nickel plate per QQ -N-290 50 microinch min. Front insulator & spacer insulator TFE thermoplastic per AMS 3651 Sealing plug PTFE thermoplastic per ASTM -D1710 7 Pin twinax contact size 8 8 Sealing plug Receptacle Part Numbers and Description Amphenol Pcd KIT P/N Item Amphenol Pcd P/N Description APX2B801K APX2B801C APX2B801G APX2B801S1 APX2B801S2 APX2B801S3 QTY/Assy QTY/Assy QTY/Assy QTY/Assy QTY/Assy QTY/Assy 1 APX2AR00N Receptacle Shell Assembly with Protective Cap 1 1 1 1 1 1 2 APXM25QPA 25 Pin Insert Polarization A with Twinax Seal 1 1 1 1 0 1 3 APXM006PB 6 Pin Insert Polarization B 1 1 1 1 1 1 4 APXIN0001 Blank Insert 0 0 0 0 1 0 5 CNP812100 APeX Pin Contact Size 12 0 6 6 6 6 6 6 CNP822100 APeX Pin Contact Size 22 0 15 15 0 0 24 7 CNP882100 APeX Pin Twinax Contact Size 8 0 1 0 0 0 0 8 CNA032401 Sealing Plug Size 22 0 9 9 0 0 0 90 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd APex Galley Connector, Rectangular Cable Accommodations Recommended Plug Panel Cutout Dimensions Recommended Receptacle Panel Cutout Dimensions Contact Size Wire Size (AWG) 22 24 Crimping Tool Positioner Installing Tool Removal Tool M22520/2-01 M22520/2-23 M81969/ 14-01 M81969/14-01 M22520/1-01 M22520/1-02 M81969/14-04 M81969/14-04 Center Contacts: M22520/2-01; Outer Body M22Metal Band Material520/5-01 Center Contacts: Daniels K709; Outer Body M22520/5-45 M81969/14-12 M81969/14-12 26 22 16 12 14 12 8 Amphenol Pcd 24 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 91 Galley Connector APex Galley Connector, Circular The new APeX Galley Connector, Circular is the latest circular connector from Amphenol Pcd. Designed specifically for legacy and new generation galley systems, it was tested to MIL-STD-1344 and EN 2591 contact standards. Highly reliable and easy to use, this blind-mate connector is also interchangeable and intermateable with other pre-existing equipment in the field. Key Features and Benefits Intermateable and Interchangeable Ability to mate with other pre-exisintg equipment in the field Highly Reliable and Durable Tested to MIL-STD-1344 and EN 2591 standards; high frequency mating Versatility Crimp termination connection system with 3 Power (10 AWG) & 3 Control (16 AWG) Many Choices Configurable to PCB contacts; plating options available Blind-Mate Connection Designed with a key feature to enable quick and simple, blind-mating Intuitive and Ergonomic Smooth, low insertion force to mate connector 92 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd APeX Galley Connector, Circular Panel Mount, Plug-6 Position, Crimp Termination Part Number Contact Qty Contact Gauge Crimp Well Wire Awg Contact Part No. 1 10 10 CNP910100-SZ 2 10 14/16 CNP910100-SZ 3 4 14/16 CNP904100-SZ 2 10 10 CNP910100-SZ 1 10 14/16 CNP910200-SZ 3 4 14/16 CNP904100-SZ 3 10 10 CNP910100-SZ 3 4 14/16 CNP904100-SZ 3 10 14/16 CNP910200-SZ 3 4 14/16 CNP904100-SZ Without n/a n/a n/a SPS00602P-1 SPS00602P-2 SPS00602P-3 SPS00602P-4 SPS00602P-5 Material Amphenol Pcd Shell Aluminum Alloy 6061 T6 Shell Finish Clear Anodized Finish Housing PPS- V0 1140A6 Color, Hsg Black Contact Retainer Ultem CRS5011 Color, CR Black Internal Contact Copper Alloy Intern. Contact Finish Silver Plate Seal EPDM Rubber Mating Part SPS00602S- X 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 93 APeX Galley Connector, Circular Panel Mount, Receptacle-6 Position, Crimp Termination Part Number Contact Qty Contact Gauge Crimp Well Wire Awg Contact Part No. 1 10 10 CNS910100-SZ 2 10 14/16 CNS910100-SZ 3 4 14/16 CNS904100-SZ 2 10 10 CNS910100-SZ 1 10 14/16 CNS910200-SZ 3 4 14/16 CNS904100-SZ 3 10 10 CNS910100-SZ 3 4 14/16 CNS904100-SZ 3 10 14/16 CNS910200-SZ 3 4 14/16 CNS904100-SZ Without n/a n/a n/a SPS00602S-1 SPS00602S-2 SPS00602S-3 SPS00602S-4 SPS00602S-5 Material 94 2014 Amphenol Pcd Shell Aluminum Alloy 6061 T6 Shell Finish Clear Anodized Finish Housing PPS- V0 1140A6 Color, Hsg Black Contact Retainer Ultem CRS5011 Color, CR Black Internal Contact Copper Alloy Intern. Contact Finish Silver Plate Seal EPDM Rubber Mating Part SPS00602S- X www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 Amphenol Pcd Cable Solutions Our cables are built for all harsh environments and designed to meet and exceed customer expectations. We have close alliances with other Amphenol divisions, enabling us to competitively offer full-turnkey terminations of any connector onto a cable assembly. We offer quick-turn prototype services and production programs with short lead-times. Our experienced engineering staff is ready to assist you with any new design ranging from connector selection to full cable assembly design. Our facility is ITAR registered and ISO 9001:2008 and AS9100-C certified. Headset & Radio Accessory Cables Custom Molded Cables for Harsh Environments Ruggadized USB Cables Ruggadized Ethernet Applications * Wire Bundle and Cable Management * Aircraft Fuel Tank * Aircraft Insulation * Hydraulic Tubing * IFE and Galley * Instrumentation * Aircraft Power Distribution * Weapon Systems * Oil and Gas * Radio/Datalink/Antenna/C4I * Shelter Power Management * Actuation and Sensors * Railway * RF & Fiber Optic Cables Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-340072 Cherry Hill Drive Beverly,MA 01915 95 AN/PRC 117F Manpack Radio Data and Remote Control "Y" Cable * Connects manpack radios to a computer for asynchronous (RS -232) and synchronous (DTE) data applications * Can be used with RF-6550M Radio Programming Application (RPA) or RF-6650M Communications Planning Application (CPA) * 25-Pin and 9-Pin D connectors for attaching data devices * Uses Y cable that connects to front panel data connector, J3 * Harris P/N: 10513-0730-A1 (6 ft); 10513-0730-A2 (10 ft) * Amphenol Pcd P/N: MCA10513-0730-06 (6 ft); MCA10513-0730-10 (10ft) High Performance Wave Form Cable * Cable is an asynchronous, PPP cable for use with the HPW and IP functions on the AN/PRC-117F(C ) * Connects to the front panel J3 Data and a COM port on a computer using a 9-pin D style connector * Typical length is 6 ft (~1.8 m) * Harris P/N: 10513-0710-AXXX A006 6 ft (~1.8 m ) A015 15 ft (~4.6m ) A025 25 ft (~7.6 m ) * Amphenol Pcd P/N: MCA10513-0710-AXXX MCAA006 6 ft (~1.8 m ) MCAA015 15 ft (~4.6m ) MCAA025 25 ft (~7.6 m ) Synchronous/Asynchronous Data Cable 96 2014 Amphenol Pcd www.amphenolpcd.com * This cable provides a synchronous or asynchronous data interface to the radio * The data terminal connection end utilizes a 25-pin (DB-25) connector * Typical Length is 6 ft (~1.8 m ) * Harris P/N: 1053 5-0780-A006 * Amphenol Pcd P/N: MCA105 35-0780-A006 info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd AN/PRC 117F Manpack Radio * A generic Audio/Data Cable * Terminated on one end with a data connector (J3 orange dot) * Unterminated on opposite end * Cable used for test and build-your-own applications * Typical Length is 6 ft (~1.8 m) * Harris P/N: 10511-0707-A006 * Amphenol Pcd P/N: MCA10511-0707-A006 * Interface cable to connect a NMEA compatible GPS receiver to the radio via the front panel J2 connector * GPS end is a 9-pin D style male connector * Length is 9 ft (22.7m) * Harris P/N: 12005-0740-A009 * Amphenol Pcd P/N: MCA12005-0740-A009 * Interface cable to connect a PLGR to the radio via the front panel J2 Connector * Typical Length is 6 ft (~1.8 m) * Harris P/N: 12005-0730-A006 * Amphenol Pcd P/N: MCA12005-0730-A006 Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com Audio/Data Cable NMEA Interface Cable PLGR/DAGR Interface Cable 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 97 AN/PRC 1117G Wideband Tactical Radio PPP Data Connector (HPW) Top Data Connector (J3 Port) * Cable exits the radio to the front right side * Terminated in a DB9 (9 Pin Female) connector * Cable Length: 6ft (~1.8m) * Sealed Design * Overmolded and Shielded * Harris P/N: 12043-2710-A006 * Amphenol Pcd P/N: MCA12043-2710-A006 * Also used with VAA Vehicle Mount J1 Port * Cable Length: 6ft (~1.8m) * Wire with RS -232 and Twisted Pair Ethernet Lines * AWG 26, 19C, TPE Jacket, 3 Twisted Pair, Shielded Watertight Design * Custom Cable Lengths and Wire Sizes Available * Cable exits to the right side of Radio (Front exit is also available) * Harris P/N: 1206-0760- A006 or 1204- 2760- A006 * Amphenol Pcd p/n: MCA 12046-0760-A006 or MCA 12046-2760-A006 J3 Front Exit Cable 98 2014 Amphenol Pcd www.amphenolpcd.com * Cable exits the radio to the front right side * Cable Length: 6ft (~1.8m) * RS -223 and Ethernet Signals * 19C Wire, TPE Jacket, 3 Twisted Pair * Overmolded Shielded AWG 26 Wire, 19C * Custom Cable Lengths and Wire Sizes Available info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd AN/PRC 1117G Wideband Tactical Radio * Data Connector for AN/PRC 117G * 32 position pogo pins * EMI gaskets * Watertight Design * Field Repairable * Overmolded Shielded Teflon Cable * Wire exits the radio to the rear * Cable Length: 6ft (~1.8m) * RS-223 and Ethernet Signals * 19C Wire, TPE Jacket, 3 Twisted Pair * Overmolded Design * Harris P/N:12046-0760-A006 or 12046-2760-A006 * Amphenol Pcd P/N: MCA12046-0760-A006 or MCA120462760-A006 * Consists of 2M (Series 807 micro miniature) * Mates to AN/PRC 117 G * Cable length: 3 ft, 6 ft, 10 ft * Interminable with Glenair Mighty Mouse Series Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com J6 Port J3 Rear Exit Cable PRC Micro Miniature Cable info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 99 AN/PRC 152 Handheld Radio Data and Remote Control "Y" Cable USB Programming Cable PPP Cable 100 2014 Amphenol Pcd www.amphenolpcd.com * Connects handheld radios to computer for asynchronous (RS- 232) and synchronous (DTE) data applications * Used with RF-6550M Radio Programming Application (RPA) or RF-6650M Communications Planning Application (CPA ) * 25-Pin and 9-Pin D connectors for attaching data devices * Components: Cable and RDA driver software * USB: 1.1 or 2. 0 * Operating Systems Supported - Windows XP, Windows Vista (x86 & x64), Windows 7 (x86 & x64) * Connections - Latching USB Type A (PC) PRC-152 32 pin side data connector on radio side * Connects handheld radios to computers when loading waveforms and plan data * Used with RF-6550M Radio Programming Application (RPA) or RF-6650M Communications Planning Application (CPA) * USB interface permits drag-and-drop radio programming * Cable Length: 6 ft (~1.8 meters ) * Components: Cable and RDA driver software * USB: 1.1 or 2. 0 * Operating Systems Supported - Windows XP, Windows Vista (x86 & x64), Windows 7 (x86 & x64) * Connections - Latching USB Type A (PC) PRC-152 32 pin side data connector on radio side * PPP and HPW data interface * Used to connect an external computer for data applications * Cable Length: 6 ft (~1.8 meters) * Components: Cable and RDA driver software * USB: 1.1 or 2.0 * Operating Systems Supported - Windows XP, Windows Vista (x86 & x64), Windows 7 (x86 & x64) * Connections - Latching USB Type A (PC) PRC-152 32 pin side data connector on radio side * DB9 Pin Female Connector * Sealed Design; Overmolded, Shielded Cable info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd AN/PRC 152 Handheld Radio * Connects external GPS receiver for time-of-day synchronization and position reporting operations * Compatible with PLGR and DAGR GPS receivers * Standard length: 6 ft (~1.8 meters) * Harris P/N: 12041-7170-01* * Amphenol P/N: MCA12041-7170- 01 * Interconnects transceivers with internal GPS devices to RF-387AT002 and RF-3182-AT antennas' GPS connectors * Connectors are SMB male on the transceiver end and SMA male on the antenna end * Standard length is 25 ft (~7.6 meters) * Specify cable length by replacing AXXX GPS Interface Cable Coaxial Cable, GPS/ Multiband Antenna A015 15 ft (~4.6 m) A025 25 ft (~7.6m) A035 35 ft (~10.7 m) A050 50 ft (~15m) * Harris P/N: 10511-0730-AXXX * Amphenol P/N: MCA10511-0730-AXX X * Used when connecting two AN/PRC-152(C) radios in a repeater configuration * High-power retransmission system can be created by using these cables with the AN/VR -C 110 50-watt vehicular power amplifier * Internal co-location filtering in the AN/VRC-110 power amplifier reduces the need for external filters * Harris P/N: 12041-7130-A1 = 50'; 12041-7130-A2 = 32.5" * Amphenol Pcd P/N: MCA12041-7130-A1 = 50'; MCA12041 7130-A2 = 32.5" Retransmission Cable Assembly *Drawing verification required from customers upon ordering to ensure accessory cables are capable with end use application. Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 101 Amphenol Pcd Shenzhen Industrial Terminal Blocks Amphenol Pcd Shenzhen Co., LTD designs and manufactures high quality Terminal Blocks, Cable Assemblies, and Custom Interconnect Solutions for the Industrial Market. Amphenol Pcd Shenzhen's Terminal Block line comprises a family of high quality, durable, high-temperature pluggable terminal blocks and headers on numerous centerline spacings. We pride ourselves in providing our customers flexible wire-to-wire and wire-to-board interconnect solutions for a wide variety of applications. Pluggable Terminal Blocks and Headers Key Features and Benefits * Wide selection of variations, configurations, and options * Plugs are available in Cage Clamp and Spring Clamp with spacing's from 2.5mm to 10.16mm and multiple wire entry options * Vertical, Horizontal, Multi-Tiered, Open/Closed, SMT options for Headers 125C standard temperature range, but high temperature headers are available to 260C * Mounting Ears available on all Plugs and Headers; black and green colors are standard * Other options include: Keying Tabs, Marking, Gold plating * Rising Cage Clamp design ensures high reliability wire termination by providing a direct high pressure connection between contact and wire * Precision Molding and dual beam contact design provides smooth mating/unmating Wire to Board Terminal Blocks Key Features and Benefits * Wide product offering: 2.54mm to 15mm spacing's available * Ultra Mini, Low Profile, Modular, and Multi-Tiered options in Vertical, Horizontal, and Angled Wire Entry * High Current and High Voltage product offering * 120C Standard, but high temperature options to 260C for reflow soldering * Available in Cage Clamp and Spring Clamp with/without mounting ears * Thru hole and SMT options * Black and Green are standard colors 102 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Pcd Shenzhen Industrial Terminal Blocks Amphenol Pcd Shenzhen Building 21, 1st Liao Keng Industrial Zone, Shi Yan Street Bao An District Shenzhen, China 518108 Tel +86 755-81738000 www.amphenolpcd.com.cn FlexiPlug(R) - FXPT Series Hybrid Pluggable Block Key Features and Benefits * Flexiplug(R) Hybrid terminal blocks combine US style standard screw driver barrier block wire terminations with a European style pluggable block nose * Screw/pressure-plate terminations enclosed in a tri-barrier configuration. Screws accept a Philips head or flat screwdriver and will accommodate up to two 12 AWG wires or ring lug/fork-tongue terminals. * Available in 5.08mm spacing and mates with ELFH Series Header. 105C standard temperature and UL Rated to 15A @ 300V. Available as in-line, even/uneven positions, and with or without Ears. * Other options include "finger proof" safety covers, high retention and gold plated contacts, markings, and keying * Black and green colors standard Wire & Cable Hoods for Industrial Terminal Blocks Key Features and Benefits * Accommodates 3.5mm, 3.87mm, 5mm/5.08mm Right Angle Plugs * 2-20 Positions available in black & green * Application: Strain relief * Cost-competitive, re-usable, and can be provided as kit Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 103 Amphenol Pcd Shenzhen Industrial Terminal Blocks Custom Interconnect Solutions Industrial Terminal Blocks are frequently used for control and equipment I/O purposes, so it is particularly important to many equipment manufactures to provide their end users with I/O terminal blocks tailored to their specific appearance, application, and/or performance criteria. Amphenol Pcd Shenzhen is dedicated to responding to unique customer needs for custom Interconnect Solutions more rapidly than any other supplier. Cable Assembly Capabilities * Amphenol Pcd Shenzhen is a UL Approved cable Assembly House, UL E356215 * Use of advanced software such as ProE and Ansys (a comprehensive suite of simulation software) * Amphenol Pcd Shenzhen has the ability to handle small and complicated cable assemblies, such as jumpers for high speed train, heavy duty cable assemblies for hybrid electrical vehicles and factory automation. 104 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Air LB GmbH Amphenol Air LB GmbH Am Kleinbahnhof 4 Saarlouis D-66740, Germany Tel. +49-6831-981-00 www.amphenol-airlb.de Amphenol Air LB GmbH is a name that connects innovative development and precise manufacturing with high quality. As an internationally established enterprise, Amphenol Air LB GmbH globally operates as part of the Amphenol group. Whether in Western or Eastern Europe, China, USA or India - the company creates reliable connections. Amphenol Air LB GmbH business activities include passive components as particularly flexible plug-in connectors in all variants as well as application-specific special developments, fiber optics and system solutions. Amphenol Air LB GmbH is a leading provider in the field of plug-in connectors for the aircraft industry and in the fields of military technology, diagnosis, automotive, and industrial ethernet connectors. ECTA 133 Connector The ECTA 133 Connector is equipped with a rugged design, convenient push-pull operation, wide range of contact sizes and high contact densities and is designed for industrial applications. It provides an ideal component to use in a wide range of applications, including robotics, laboratory test equipment, transportation (automobile, trucks and railway) and tool interconnection. Series 1331: power transmission connector (to 125 A) equipped with lead ground contact (and pilot contacts for the arrangement 605 for 100 A current and 706 for 125 A current). Series 1332: signal transmission connector (to 25 A) for data or signal transmission. The current ratings of the contacts also permit the connector to be used for low power transmission. A fiber optic version is available on request, and overmolded cables as well as customer specific arrangements are available in large quantity applications. Amphenol Air LB GmbH Solutions ECTA 544 Composite Connectors Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com ECTA 133 Connectors 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 105 Amphenol Socapex Military, Aerospace & Industrial Connectors Amphenol Socapex 948 Promenade de I'Arve-B.P 29 74311 Thyez Cedex-France Tel. +33 (0)4 50 89 2800 www.amphenol-socapex.com Amphenol Socapex provides reliable electrical and optical connectors and interconnect solutions to a large base of customers worldwide. The company designs & manufactures both standard connectors and custom solutions suited for harsh environments. Key markets include: Security & Defense with C4ISR, ground vehicles, weapons, munitions, military airframe, homeland security, Commercial Avionics and Industry. Today, Amphenol Socapex employs more than 450 people at two facilities in Thyez (France), Puna (India) with two antennas in Shenzhen (China) and Beverly, MA (USA). Find more information on www.amphenol-socapex.com. Please contact the Beverly, MA facility (Amphenol Pcd) for any inquiries regarding Amphenol Socapex products in North America. PowerSafe and SC39 Snatch Release Connector Rugged USB Connectors Rugged RJF45 Connectors derived from MIL-38999 Series Connectors Rugged Ethernet and USB Cabling Rugged RJ Field RNJ Heavy Duty Rack and Panel Connectors derived from MIL-38999 Series Connectors HDAS Board Level High Density Signal Connectors & HiLinX Board Level Modular M55302 Compatible Connectors 106 2014 Amphenol Pcd www.amphenolpcd.com Self Closing Caps info@amphenolpcd.com Rugged Ethernet Switches 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Socapex Military, Aerospace & Industrial Connectors Amphenol Socapex Field Series Connectors are designed to allow a user to transform a standard infocom cord set into a rugged waterproof connector for harsh environments. The Field Series offers a full range of versions for a variety of applications, and are designed to reduce installation time and simplify installation and maintenance procedures. The Field Series Connectors are environmentally sealed to an IP67 rating and provide resistance to shock, vibration, traction, as well as provide EMI protection. The Field Series Connectors also provide rugged solutions for USB, Firewire, and RJ11 connectors, as well as Ruggadized Ethernet Switches and accessories. Rugged USB Field and USB Memory Keys Rugged RJ Field * RJ Field allows you to use an Ethernet class D/Cat 5e connection for 10 BaseT, 100 BaseTX * * * * * Rugged Military Ethernet Switches Media Converters * * * * Rugged Gigabit Ethernet Media converters Intended for network extension of Land, Marine, and Aerial application MIL-STD-461 (EMI), MIL-STD-810 (Environment) Butt joint or expanded beam optical connectors * * * * * RNJ Heavy Duty Rack and Panel Connectors * * * * * * Board Level Solutions Connectors Amphenol Pcd Ergonomic, Robust & Sealed (IP68 mated) High current capabilities Safe for user & electronics (IP2X Unmated & Interlock) High mating cycles (3,000) Easy to connect and disconnect (Push-Lock mating mechanism) PowerSafe (New Version According to VG96944) Find out about our high-performance board-to-board connectors (HDAS, SMASH, Hilinx) to ensure a secure data transmission for the most demanding industries (www.pcb-interconnect.com) 2014 Amphenol Pcd Full MIL-STD complian Managed and Unmanaged available Can be exposed to EMI & RFI perturbation, vibrations, shock IP67 sealed Possibility to have mixed copper and fiber optic ports ERGON' Derived from MIL-38999 Series connectors * Sealed against fluids and dusts (IP68) Shock, vibration and traction resistant No cabling operation in the field, no tools required Keys available in several capacities (up to 256 GB) Keys sealed (IP68), metallic shell with various plating www.amphenolpcd.com * * * info@amphenolpcd.com Ideal for I/O Power for boxes, power connectors spread on the field (drums) IP68 sealing and temperature resistance ranging from -65C to +200C Innovative connector with applications in many fields when user safely is a concern 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 107 Amphenol Socapex Amphenol Socapex Global Network Solutions For Harsh Environments Amphenol Socapex Capabilities in Ethernet Networks Include: * Network Design * Network Evaluation * Strong Expertise in Internet Protocol Communication * Measurement Equipment Based on its expertise in harsh environments, Amphenol Socapex provides the Security & Defense markets with both the interconnection products and the Ethernet network design and installation. The companies rugged and reliable solutions give the insurance of a continuous and secure data transmission between all communication devices in the harshest environments. 108 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Air LB France Interconnect Systems Amphenol Air LB France 29 Voie d' Yvois F-08110 Blagny, France Tel. +33 (0)3 24 22 32 66 www.amphenol-airlb.fr Part of Amphenol Corporation, Amphenol Air LB France employs 220 people and is located in North-East of France, close to Belgian and Luxembourg borders. Aiming at "Operational Excellence," Amphenol Air LB France successfully combines its traditional "engineering culture" with a proactive "customer focus" attitude and can claim excellent performances in terms of Service, Quality and Logistics ("A" rated by customers in 2012). Specializing in new product development for harsh environments, Amphenol Air LB France works in close cooperation with OEM's, system suppliers, and subcontractors in order to develop innovative and custom designed interconnect solutions. The company is structured to deliver worldwide. Please contact Amphenol Pcd for any inquiries regarding Amphenol Air LB products in North America. Amphenol Air LB SIM Connector System The SIM (Modular Interconnect System), is a modular, multi-contact, multifunctional rectangular connector. The connector is available in metallic or composite versions, as well as in shielded and unshielded versions. The SIM Connector uses over-molded SIM modules that are specifically designed to be environmentally sealed and are available in a wide variety of contact sizes. SIM Connectors are qualified to the European MIL-SPEC EN 4165 and are equivalent to a MIL-38999 Connector. Amphenol Pcd European Specification Junction Modules 1900 Series Rectangular Connectors Terminal Block and Aluminum Bus Bars European Specification Relay Sockets 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 109 Amphenol Air LB France Electronic Connection Systems Amphenol Air LB France Push and Pull Connectors For interiors and IFE Systems Amphenol Air LB France offers a variety of Push-Pull connectors in variety of styles, wire sizes, and configurations. Series 3559 Push-Pull connectors are fully compatible with Air LB SIM modules allowing for flexibility in wiring applications. Amphenol Air LB France also recently designed their new ARINC 809 connector, which has shielding capabilities along with the push-pull design. Amphenol Air LB France is a world leading manufacturer of high performance standard and custom interconnect solutions and accessories for wiring and fixing: * Quick Connection Junction Modules * Rectangular Connectors (EN4165, EN3545, Push-Pull) * Industrial Circular Connectors * Relay Sockets * Terminal Blocks and Terminal Block Assemblies * Fixing Accessories for Cable Harnesses and Hydraulic Conduits * Specific Products and High Value-Added Solutions (wiring boxes, etc) * Markets * Commercial Aerospace * Defense * Rail and Mass Transit * Industrial * Energy * Medical In-Line Junctions In-Line Junctions for Copper Cable Contacts * * * * Industrial In-Line Junctions Sealed In 1, 2, or 3 circuits Contact size: 16, 20, or 22 Fire, Smoke, Toxicity: ABD031 and FAR25.853 * * * Nuclear In-Line Junction (Current Generation) * * * In-Line Junctions for Nuclear Environment (New Generation) Qualified for K1 and K2 environment Sealed Satisfy environmental test specification EDF/DER * * * * * * 110 2014 Amphenol Pcd Sealed In 1, 2, or 3 circuits Contact size: 16 or 20 www.amphenolpcd.com info@amphenolpcd.com Qualified for K1 and K2 environment Quick disconnect/reconnect Suited to interconnect cables with different ction (1 to 35 mm for male contacts and 2.5 to 6 8 mm for female contacts) Sealed Satisfy environment test specification EDF/DER n HM 63-7195/5 relating to class, IE-A materials for PWR nuclear power stations Quick and easy maintenance 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Air LB France Interconnect Systems In-Line Junctions Individual Junction Terminals In-Line Junctions for Aluminum Cable Contacts * Sealed In 1, 2, 3 or 4 circuits * * * Individual Junction Terminals Contact size: 20 and 22 Fire, Smoke, Toxicity: ABD031 and FAR25.853 * * * * Quick Connection Junction Modules 1750 Modules * * * * * * * * Available in screw or crimp types Contact size: 12, 16, or 20 Contacts: NF L53-105-EN 3155-016 Fire, Smoke, Toxicity: ABD031 and FAR25.853 1765 Electronic Component Carrier Modules Many contacts layouts (even mixed) From 6 to 36 contacts, sizes 10 to 22 26 to 8 A WG for cable sections from 0.15 to 8.98 mm Sealing assured by a patented over-molded grommet In/Out the rail without special tools nor adjacent modules removing Contacts: NF L53-105-EN 3155-016 Modules: NF/UTE C93-462 Fire, Smoke, Toxicity: ABD031 and FAR25.853 1767 PA Modules with "Positive Locking" Same performances as 1750 modules. Besides: * Component s mounting means: solder pads, fuseholder clamps, inserted or welded directly on PCB * Protection of components by a cover * Components may be protected by resin or insulating foam * Contacts: NF/UTE L53 -105, NAS 1749 & EN 3155-016 * Modules: derived from NF/UTE C 93-462 standard * Fire, Smoke, Toxicity: ABD031 and FAR25.853 1777 Modules' Same performance as 1750 modules. Besides: * 100% guarantee of properly contact locking: PA technology prevents contacts from being unsecurely locked in position, and then from becoming faulty while in service * Wire pulling tests becomes unnecessary with PA modules * Weight of modules reduced about 50% * Contacts: NF/UTE L53-105 NAS 1749 & EN 3155-016 * Modules: derived from NF/UTE C 93-462 * Fire, Smoke, Toxicity: ABD031 and FAR25.853 * * * * * * * 1777 Component Carrier Modules * 1200 Modules Like the 1777 type module, they snap on the same rail side-by-side and take the space of two modules (1.102 in pitch) Consists of sealed quick junction connection for male crimp contacts P size 20 and a component carrier shell Componets may be mounted by means of solder pads * * Many contacts layouts (even mixed) From 6 to 18 contacts, sizes 10 to 20 Cable sections from 0.25 to 6 mm IP 66 In/out without special tools nor adjacent module removing Contacts: NF L53105 & EN 3155 - 016 Modules: NF/UTE C 93462 Nuclear Module (Pending) * * * * * * * Modules comply with ABS1569 standard Crimp socket contacts comply with EN 3155-015F2018 standards. May be inserted or extracted with standard tools. Two types of metal rails, cut to measure Large range of contact layouts Modules mounted individually Modules can be mounted with 1100 series Fire, Smoke, Toxicity: ABD031 and FAR25.853 Nuclear Modules (Current Generation) * * * * * * Amphenol Pcd Qualified for K1 and K2 environment Suited to interconnect cables with different cross section Satisfy environmental tests specification EDF/DER n HM 63-7195/5 relating to class IE-A materials for PWR nuclear power stations Removable mini-modules/socket mounted on rail Contacts shunted by 2 or 3 contacts Cable cross section from 0.38 to 3.3 mm 2014 Amphenol Pcd www.amphenolpcd.com * * * * info@amphenolpcd.com 18 contacts sizes 20 Sealing assured by a patented overmolded grommet F/UTE L53-105 - NAS 1749 & EN 3155-016 Modules: NF/UTE C 93-462 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 111 Amphenol Air LB France Interconnect Systems Quick Connection Junction Modules In-Line Junction with Components In-Line Junctions with Components 1100 Modules * * * * * * * Various contact arrangements Contact sizes: 12, 16, 20, and 22 26 to 12 AWG for cable sections from 0.15 to 3.18 mm Sealing assured by a patented over-molded grommet Contacts: NF/UTE L53-105-NAS 1749 & EN 3155-016 Modules: NF/UTE C93-462 Fire, Smoke, Toxicity: ABD031 and FAR25.853 * * * * * Circular Grounding Modules with Components Feedthru Circular Modules * * * * * Sealed Models with diodes, fuses, resistors Contact size: 20, gauge 18 to 24 AWG, section from 0.21 to 0.93 mm Contacts: NF/UTE L53-105 - NAS 1749 & EN 3155 - 016 Fire, Smoke, Toxicity: ABD031 and FAR25.853 With female shunts for male contacts or male shunts for female contacts Contact sizes: 20, from 18 to 24 AWG Sealed and unsealed versions Contacts: ASNE 0396, EN 3155 & MIL-C-39029 Fire, Smoke, Toxicity: ABD031 and FAR25.853 * * * * Sealed or unsealecd versions Component: resistors Contact size: 20, from 18-24 AWG Fire, Smoke, Toxicity: ABD031 and FAR25.853 Rectangular Grounding Modules * * * * * * * Sealed grounding modules (1750, 1100, and 1400 types) 1750 types mounted on individual brackets or metallic rail 1750 types: 8 to 36 cts size 12 to 22 1100 and 1400 types mounted on individual brackets 1100 and 1400 types: 8 to 10 cts size 12 to 20 Contacts: NF L53-105, NAS 1749 & EN 3155 Fire, Smoke, Toxicity: ABD031 and FAR25.853 PCB Modules PCB 1750 Modules * * * * * PCB 1777 Modules 18 contacts sizes 20 Sealing assured by a patented overmolded grommet Contacts: NF/UTE L53-105 - NAS 1749 & EN 3155-016 Modules: NF/UTE C 93-462 Fire, Smoke, Toxicity: ABD031 and FAR25.853 * * * * 8 cts size 12 or 18 cts sizes 20 Sealing assured by a patented overmolded grommet Contacts: NF/UTE L53-105 - EN 3155-016 Modules: NF/UTE C 93-462 PCB 1100 Modules * * * * * 112 21 cts size 22 or 10 cts 20 Sealing assured by a patented overmolded grommet Contacts: NF/UTE L53-105 - NAS 1749 & EN 3155-016 Modules: NF/UTE C93-462 Fire, Smoke, Toxicity: ABD031 and FAR25.853 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Limited Military, Aerospace & Industrial Connectors Amphenol Limited Thanet Way, Whitstable Kent CT 3JF, United Kingdom Tel. +1 (44) 1227-773-200 www.amphenol.co.uk Amphenol Limited, based in the UK, designs and manufactures interconnect product, cables and electronics packaging for the Military Aerospace, Civil Aerospace, Defense, Rail Mass Transit and Industrial Markets. Military and Aerospace Amphenol is the world leader in the design, manufacture, and supply of high-performance interconnect systems for military and commercial aerospace harsh environment applications. Amphenol provides an unparalleled product breadth, from military specification connectors to customized high-speed board level interconnects; from flexible to rigid printed circuit boards; from backplane systems to completely integrated assemblies. Key markets supported are avionics, radar, communications, ordnance, missiles, engines, ground vehicles and tanks, space, and all levels of aviation. Amphenol is a technology innovator that designs to meet customers' needs from program inception. Industrial Amphenol is a technology leader in the design, manufacture, and supply of high-performance interconnect systems for a broad range of industrial applications, including medical equipment, factory automation, heavy equipment, instrumentation, motion control, rail mass transportation, alternative energy, and natural resource exploration. Amphenol's core competencies include application-specific industrial interconnect solutions utilizing integrated assemblies with flexible printed circuits as well as high-power interconnects requiring a high degree of engineering and system integration. Our innovative solutions facilitate the increasing demands of embedded computing and power distribution. TV-CTV Tri-Start MIL-DTL-38999 Series III connectors have high-density contact arrangements in a miniature circular shell. Originally designed for the high-performance requirements of military and commercial aircraft, these circular connectors are perfect for applications requiring extremely reliable interconnections. Amphenol TV-CTV connectors are quick-mating and environmentally-sealed and represent the highest performing connectors from the 38999 range. They are available in aluminum alloy, composite, stainless steel, and marine bronze. * * * * * * Operates at extreme temperatures 100% Scoop proof contact protection High coupling durability with outstanding EMI shielding protection Moisture and corrosion resistance Different plating options available, including Black Zinc Nickel (RoHS) Self-locking connector systems provide the best performance for threaded connectors in high vibration applications SJT MIL-DTL-38999 series miniature circular connectors offer high-density contact arrangements in a bayonet coupling style. They are environmentally-sealed and have a wide operating temperature range. These lightweight and scoop proof connectors meet the requirements of VG96912, are qualified to 1003 and are NATO-standard. They are commonly called 38999 Series I. * * * * * Lightweight 100% Scoop proof contact protection Environmentally sealed Different plating options available, including Black Zinc Nickel (RoHS) Typical Applications; Battlefield, ground vehicles, aircrafts, communication systems, advanced industrial applications. LJT MIL-DTL-38999 Series I miniature connectors offer high-density contact arrangements and are suitable for extremely high-reliability connections including use in military and commercial aviation. They are environmentally sealed, have a wide operating temperature range and meet the requirements of HE308. * * * * Amphenol Pcd 2014 Amphenol Pcd Bayonet coupling 100% scoop proof Rugged Typical Applications; Military avionics, military vehicles, battlefield communication www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 113 Amphenol Limited Military, Aerospace & Industrial Connectors JT MIL-DTL-38999 Series II miniature connectors offer high-density contact arrangements in a small size. They were designed for high-performance requirements, including military and commercial aviation applications. These connectors are environmentally-sealed and have a wide operating temperature range. * * * * Bayonet coupling Lightweight Low profile shell Typical Applications: military aeronautics, applications requiring very low profile connector form Terrapin a miniature series of circular push-pull connectors intended for harsh environment applications and used extensively in soldier communications. Within a rugged shell design, Terrapin offers superior EMC performance and high environmental sealing to IP68. Resilient in severe battlefield situations, the RoHS compliant black-silver plating is both low-luster and corrosion resistant. Featuring an optional locking mechanism, multiple shell sizes with up to 37 contacts and suitability for overmolding, Terrapin is the preferred choice for miniature connectors in military and other harsh environment applications. * * * * * Miniature circular interconnect with push-pull or locking mating style IP68 sealed in mated & unmated condition Optimized for low cost overmolding Widely used for soldier equipment Multiple keying options EMI Filtered Terrapin has the same miniature size and footprint of the standard Terrapin connector series. EMI Filtered Terrapin connectors are widely used for applications where space is at a premium i.e. hand-held devices and highly connectorised equipment. Embedding the filtering within the connector eliminates the need for `dirty' areas or additional filter boards and circuitry within the box, resulting in weight and space savings. * * * * Standard Terrapin panel cut-out dimensions Minimal increase in overall length Intermateable with standard product 2,000 mating cycles Ruggadized Micro-USB Terrapin now replaces the majority of Mini-USB connections for equipment, such as PDAs and Smartphones. The specification of the Micro-USB supports the current USB On-The-Go (OTG) supplement and provides total mobile interconnectivity by enabling portable devices to communicate directly with each other without the need for a host computer. * * * * Backshell for strain relief and screen termination 2,000 mating cycles 5 keying options Miniature footprint <16mm Lightweight Aluminum Terrapin is fully is intermateable and backwards compatible with original Terrapin connectors, but is up to 50% lighter. All popular performance features and high specification of the Terrapin product range have been retained, i.e IP68 sealing in mated and unmated conditions, platforms with up to 37-contacts, integral backshell for low cost overmolding and of course the unique mating mechanism which allows the same plug to mate with either break-away or locking receptacles. * * * * * * 114 2014 Amphenol Pcd www.amphenolpcd.com Up to 50% lighter vs Terrapin Hermetic glass-to-metal sealing including matched seals and low to high compression seals. Conveyor and batch ovens, and brazing facilities with a variable protective atmosphere oven. IR/BD testing facilities up to 10G/12Kv Helium leak testing up to: 5.10-12 cm3.s-1 at 1 bar P Helium Multiple keying options info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Limited Military, Aerospace & Industrial Connectors Hermetic Solutions uses glass-to-metal sealing technology that provides exceptional mechanical performance in extreme pressure and temperature environments while providing excellent hermetically. Many of our Hermetic connector and feed through technologies can be customized to match existing or new specialty requirements, and are designed and manufactured for compliance with the appropriate standards, including Mil-DTL-38999, Mil-C-26482, Mil-C-24308, Mil-C-5015 and EN2997. * * * * Hermetic glass-to-metal sealing including matched seals and low to high compression seals Conveyor and batch ovens, and brazing facilities with a variable protective atmosphere oven IR/BD testing facilities up to 10G/12Kv Helium leak testing up to: 5.10-12 cm3.s-1 at 1 bar P Helium Rhino 38999 combines the benefits of field-proven Mil-DTL-38999 Series III circular connectors with hyperbolic contacts that extend the boundaries of high power connector technology. Designed to meet the latest military and industrial specifications, Rhino 38999 connectors also meet stringent safety requirements. * * * * 38999 Series III or Bulldog connector interface Jam-nut flange mount and inline connections 500+ mating cycle durability Up to 1000A current capacity Filtered Rhino 38999 are available with a standard range of cost-effective MOTS (Military off-the-shelf) filters suitable for EMC suppression of COTS (Commercial off-the-shelf) equipment on military vehicles. This, combined with the benefits of field-proven Mil-DTL-38999 Series III circular connectors and hyperbolic contacts, extend the boundaries of high power connector technology. * * * 38999 Series III connector interface Jam-nut flange mount and inline connections 500+ mating cycle durability Bulldog is a quick release, breakaway connector with the additional benefit of IP68 sealing. This RoHS compliant connector range has been specifically developed for harsh environment vehicle applications. The products are designed for quick, safe disconnection and is ideal for jettison applications where damage limitations are critical. The Bulldog Series is designed to use standard MIL-DTL-38999 specification insert arrangements within a rugged and non-reflective shell design. The use of standard insert arrangements ensures the connectors' suitability for Power, Signal and Strength. * * * * Amphenol Pcd 2014 Amphenol Pcd Quick release, break away Standard Series III D38999 insert platforms IP68 sealed in mated condition 1,000 mating cycles www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 115 Amphenol Interconnect India Amphenol Interconnect India 105, Bhosari Industrial Area Pune - 411 026 Tel. +91 20 30688304 www.amphenol-in.com Amphenol 164 Series Audio Connectors are water-resistant, polarized, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They are qualified to the MIL-DTL-55116 specification. The connectors employ three-point bayonet coupling for quick disconnect and self-wipe contact. Although designed for use in communications equipment, these versatile connectors have been successfully adapted for use in numerous industrial, scientific and educational applications. MW Series Power Connectors are qualified to MIL-DTL-55181. They are designed with a center lock coupling screw. The connectors are waterproof, polarized and can withstand high shock and vibrations. They are primarily used for interconnection of power and control circuits of electric equipment by the US Army Communication System. D-Sub M2000 Series Connectors are qualified to the MIL-DTL-24308 specification. These connectors are subminiature Rack & Panel type with polarized shell and fully gold plated machined contacts. It's a time tested design and widely used for power and signal. They have excellent performance features like easy mating and positive contact pressure. Application-specific variants are supported as well. 116 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 Amphenol Pcd Amphenol Interconnect India Protective Caps for Circular Connectors (MIL-C-26482, MIL-DTL-38999 I II III, MIL-C-5015, MIL-C-22992) Amphenol India Protective Caps are developed for environmental protection needs of circular connectors in Threaded & Bayonet versions. These are designed to meet the Military standard. AGE96929 Power Series Connectors are single pole connectors. They are used for transmitting very high current at very low voltage and are used in various military & seaborne vehicle applications & industrial equipment. The AGE96929 Power Series Connectors are derived on the basis of VG95234 with consideration of all mating dimensions and mechanical characteristics. This series meets theVG96929 specification. The EV Series Power Connectors are specifically designed for connecting the power cables within a mobile or stationary power supply. The power supplies may be used with vehicle drive systems or stationary power. The connectors meet the necessary specifications for commercial transportation requirements. The IP2X or TUV Fingerproof design on both the plug and receptacle allow much greater flexibility when connectorizing `always hot' systems, such as battery packs, fuel cells, capacitor packs, and more. Amphenol Pcd 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive, Beverly, MA 01915 117 Stay Connected with Amphenol Pcd, & Our Proven Technology will keep you Connected Be the first to know about our latest products, tradeshow activity and much more. 118 2014 Amphenol Pcd www.amphenolpcd.com info@amphenolpcd.com 1(978) 624-3400 72 Cherry Hill Drive Beverly, MA 01915 Amphenol Pcd