IRFF9230PBF - International Rectifier

Absolute Maximum Ratings

Parameter Units

ID @ VGS = -10V, TC = 25°C Continuous Drain Current -4.0

ID @ VGS = -10V, TC = 100°C Continuous Drain Current -2.4

IDM Pulsed Drain Current ➀-16

PD @ TC = 25°C Max. Power Dissipation 25 W

Linear Derating Factor 0.20 W/°C

VGS Gate-to-Source Voltage ±20 V

EAS Single Pulse Avalanche Energy ➁75 mJ

IAR A valanche Current ➀—A

EAR Repetitive Avalanche Energy ➀—mJ

dv/dt Peak Diode Recovery dv/dt ➂-5.0 V/ns

TJOperating Junction -55 to 150

TSTG Storage T emperature Range

Lead Temperature 300 (0.063 in. (1.6mm) from case for 10s)

Weight 0.98(typical) g

PD - 90551D

The HEXFETtechnology is the key to International

Rectifier’s advanced line of power MOSFET transistors.

The efficient geometry and unique processing of this latest

“State of the Art” design achieves: very low on-state resis-

tance combined with high transconductance.

The HEXFET transistors also feature all of the well

established advantages of MOSFETs such as volt-

age control, very fast switching, ease of parelleling

and temperature stability of the electrical parameters.

They are well suited for applications such as switch-

ing power supplies, motor controls, inverters, chop-

pers, audio amplifiers and high energy pulse circuits.

04/20/01

www.irf.com 1

TO-39

Product Summary

Part Number BVDSS RDS(on) I D

IRFF9230 -200V 0.80Ω -4.0A

Features:

nRepetitive Avalanche Ratings

nDynamic dv/dt Rating

nHermetically Sealed

nSimple Drive Requirements

nEase of Paralleling

For footnotes refer to the last page

JANTX2N6851

REPETITIVE AVALANCHE AND dv/dt RATED

JANTXV2N6851

HEXFETTRANSISTORS JANS2N6851

THRU-HOLE (TO-205AF) REF:MIL-PRF-19500/564

200V, P-CHANNEL

IRFF9230

2www.irf.com

Thermal Resistance

Parameter Min Typ Max Units T est Conditions

RthJC Junction-to-Case — — 5.0

RthJA Junction-to-Ambient — — 175 Typical sock et mount

°C/W

Source-Drain Diode Ratings and Characteristics

Parameter Min Typ Max Units T est Conditions

ISContinuous Source Current (Body Diode) — — -4.0

ISM Pulse Source Current (Body Diode) ➀— — -20

VSD Diode F orward V oltage — — -6.0 V T j = 25°C, IS =-4.0A, VGS = 0V ➃

trr Reverse Recovery Time — — 400 nS Tj = 25°C, IF = -4.0A, di/dt ≤ -100A/µs

QRR Reverse Recovery Charge — — 4.0 µ C VDD ≤ -50V ➃

ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.

Note: Corresponding Spice and Saber models are available on the G&S Website.

For footnotes refer to the last page

Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)

Parameter M in Typ Max Un its T e st Conditions

BVDSS Drain-to-Source Breakdown V oltage -200 — — V VGS = 0V, ID = -1.0mA

∆BVDSS/∆TJTemperature Coefficient of Breakdown — - 0.22 — V/°C R efe ren ce t o 25°C, ID = -1.0mA

Voltage

RDS(on) Static Drain-to-Source On-State — — 0.80 VGS = -10V, ID = -2.4A ➃

Resistance — — 1.68 VGS =-10V, ID =-4.0A ➃

VGS(th) Gate Threshold V oltage -2.0 — -4.0 V VDS = VGS, ID = -250µA

gfs Forward Transconductance 2.2 — — S ( ) V

DS > -15V, IDS = -2.4A ➃

IDSS Zero Gate V oltage Dr ain Current — — -25 VDS= -160V, VGS=0V

— — -250 µA VDS = -160V

VGS = 0V, TJ = 125°C

IGSS Gate-to-Source Leakage Forward — — -100 VGS = -20V

IGSS Gate-to-Source Leakage Reverse — — 100 nA VGS = 20V

QgT otal Gate Charge 14.7 — 34.8 VGS =-10V, ID = -4.0A

Qgs Gate-to-Source Charge 0.8 — 7.0 nC VDS= -100V

Qgd Gate-to-Drain (‘Miller’) Charge 5.0 — 17

td(on) Turn-On Delay Time — — 50 VDD = -100V, ID = -4.0A,

trRise Time — — 100 VGS =-10V,RG =7.5Ω

td(off) Turn-Off Delay Time — — 100

tfFall Time — — 80

LS + LDTotal Inductance — 7.0 —

Ciss Input Capacitance — 700 VGS = 0V, VDS = -25V

Coss Output Capacitance — 200 — pF f = 1.0MHz

Crss Reverse Transfer Capacitance — 40 —

Ω

Measured from drain lead (6mm/0.25in. from

package) to source lead (6mm/0.25in. from

package)

www.irf.com 3

IRFF9230

Fig 4. Normalized On-Resistance

Vs. Temperature

Fig 2. Typical Output CharacteristicsFig 1. Typical Output Characteristics

Fig 3. Typical Transfer Characteristics

IRFF9230

4www.irf.com

Fig 8. Maximum Safe Operating Area

Fig 6. Typical Gate Charge Vs.

Gate-to-Source Voltage

Fig 5. Typical Capacitance Vs.

Drain-to-Source Voltage

Fig 7. Typical Source-Drain Diode

Forward Voltage

13 a& b

www.irf.com 5

IRFF9230

Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case

Fig 9. Maximum Drain Current Vs.

Case Temperature

Fig 10a. Switching Time Test Circuit

Fig 10b. Switching Time Waveforms

VDS

VGS

Pulse Width ≤ 1 µs

Duty Factor ≤ 0.1 %

VGS

VDD

RGD.U.T.

90%

10%

d(on)

d(off)

IRFF9230

6www.irf.com

Fig 12c. Maximum Avalanche Energy

Vs. Drain Current

Fig 12b. Unclamped Inductive Waveforms

Fig 12a. Unclamped Inductive Test Circuit

tpV

(

)

DSS

0.01

Ω

D.U.T

DRIVER A

15V

-20V

Fig 13b. Gate Charge Test Circuit

Fig 13a. Basic Gate Charge Waveform

Charge

-10V

D.U.T. VDS

-3mA

VGS

.3µF

50KΩ

.2µF

12V

Current Regulator

Same Type as D.U.T.

Current Sampling Resistors

VGS

-12V

www.irf.com 7

IRFF9230

Foot Notes: ➂ ISD ≤ -4.0A, di/dt ≤ -120A/µs,

VDD≤ -200V, TJ ≤ 150°C

Suggested RG = 7.5 Ω

➀ Repetitive Rating; Pulse width limited by

maximum junction temperature.

➁ VDD = -50V, starting TJ = 25°C,

Peak IL = -4.0A,VGS =-10V

Case Outline and Dimensions —TO-205AF

➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2%

LEGEND

1- SOURCE

2- GATE

3- DRAIN

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7903

Visit us at www.irf.com for sales contact information.

Data and specifications subject to change without notice. 04/01