V-Series
Switch
Carling Technologies, Inc.
60 Johnson Avenue • Plainville, CT 06062-1177
Phone: (860) 793-9281 • Fax: (860) 793-9231
Email: sales@carlingtech.com • www.carlingtech.com
Carling Technologies’ fully sealed V-Series Contura switches
are well known for their cutting edge design, high quality,
maximum performance and unmatched reliability. These
switches are a staple in the marine and transportation
industries and have passed a range of environmental,
corrosion, temperature, vibration, shock and sealing tests
including MIL Std 202F, MIL Std 810C, UL 1500, ISO 8846, IEC
60529 and BS 5490 among others, making them one of the
most rugged and reliable switches ever manufactured.
Product Highlights:
Maximum sealing protection with dual seals around lamps
and rocker stem certified to IP66 & IP68. Optional panel
seals for additional protection.
Silver plated butt contact mechanism provides 50 to
100 thousand electrical cycles and a variety of different
electrical ratings.
Roller pin mechanism does not require lubricants and
allows the switch to withstand extreme temperatures.
The switch base accommodates up to 10 terminals and a
large variety of switch and lighting circuits.
The multi-step mounting wings provide a secure fit for
panel thicknesses of 0.032” thru 0.250” in an industry
standard 0.830” x 1.450” mounting hole.
The switch connector allows the user to preload FQC
terminals for easy assembly to switch base.
Numerous choices of removable rockers allow for style
change without having to retest or re-qualify the switch
base.
Illumination options are endless with bar, oval, and square
lenses available in choices of incandescent, neon and
a wide variety of LEDs including superbrite, megabrite,
flashing and bicolor lighting.
Available with a variety of complimentary mounting
panels, hole plugs, illuminated indicators and boots to
accommodate most any design need.
CONTURA V CONTURA VII
CONTURA III CONTURA II
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
2 |V-Series Contura Sealed Rocker Switches
OPTIONAL PANEL SEAL
Prevents water/dust egress
behind panel.
MULTIPLE LIGHTING OPTIONS
Incandescent lamps & LED lighting. Our
LED illumination is offered in a wide array
of light intensities, colors, as well as dual
level, tri-color, and flashing options.
MAXIMUM DESIGN OPTIONS
WITH MINIMUM INVENTORIES
Panel redesign is a snap,
requiring no tooling change, with
our removable interchangeable
actuators. A unique balance
between aesthetics and
functionality.
SEALS OUT WATER, DUST
AND DEBRIS
Dual seal protection locks
out elements. Certified to
IP66/IP68 for front panel
components.
CLEAN CONNECTIONS
Offered in both eight and
ten terminal base options.
AMP & Packard compatible
connectors available.
SILVER PLATED BUTT
Contact mechanism
provides 50 to 100
thousand electrical cycles
and a variety of different
electrical ratings.
WITHSTANDS EXTREME
TEMPERATURES
Roller pin mechanism
eliminates the need for
lubricants. Enables switch
to withstand -40°C to
+85°C temperatures.
V-Series Switch
DESIGN FEATURES
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 3 V-Series Contura Sealed Rocker Switches & Illuminated Plug
V-Series Contura Switches
V-Series switches offer countless unique options including choices for ratings, colors, illuminations and symbols. These switches feature removable
actuators in a choice of actuator styles and colors, and are available in single or double pole configurations. The V-Series switches can be illuminated
with either square, oval and/or bar shaped lenses.
Contura II & III
The Contura II & III actuators are
constructed of thermoplastic
polycarbonate and are offered with
a hard nylon overlay or a “soft-touch”
elastomer overlay. These models
incorporate aesthetic designs on
the top and bottom of the rocker
featuring two rows of raised
“bumps” on the Contura II and three
“indented” lines on the Contura III.
Contura IV
The Contura IV’s “Shape to create
a Shape” actuator works with the
curves, contours & advanced
styling of the latest panel designs,
flowing with these advanced
curves & radii. This actuator style
fits on the Contura flush bracket/
bezel.
Contura V
The symmetrically curved
Contura V actuator provides
the perfect complement to the
Contura IV’s “Shape to create a
Shape” design concept. With its
flush style mounting bracket,
Contura V can be mounted in
between two Contura IV’s, by
itself, or in groups.
Contura VII
Contura VII featuring gently
curved corners and edges
assuring compatibility with most
any panel design. Intuitive feel
is maximized by the use of 2
embossed circular pads located at
opposite ends of the rocker. Any
combination of Bar or Oval style
lenses can be located in the pads
providing a truly unique look,
exclusive to Contura VII.
Contura VI (WAVE)
The Contura VI WAVE sealed
rocker switches, when used in a
row, create an uniquely appealing
“wave” design on your panel. A
variety of colors and finishes are
available for both rocker and wave
insert. Contura VI features bar and
oval lenses.
Contura X
The raised bracket/bezel on
the Contura X helps prevent
inadvertent actuation of the
rocker, as well as preventing
debris from being trapped under
the actuator. This curved rocker
style is available with a variety of
lenses and legends.
Contura XI
The raised bracket/bezel on
the Contura XI helps prevent
inadvertent actuation of the
rocker, as well as preventing debris
from being trapped under the
actuator. This convex style rocker
is available with a wide variety of
lenses and legends.
Contura XII
The Contura XII version features
a paddle style actuator with
the raised bracket/bezel of
Contura X and XI. The contoured
handle design provides intuitive
recognition and ease of operation
and is available with all Contura X
and XI lens and legend offerings.
Illuminated Indicator
The Illuminated Indicator is offered
with removable/ replaceable
lamps and Contura II, III, V, or X
styling. Illumination alerts the
operator of essential system
functions or malfunctions like: oil
pressure, high temperature, fluid
levels, parking brake, or general
system malfunction.
V–Series
Accessories/Options
Carling Technologies also offers
many V-Series accessories
including connectors, mounting
panels, hole plugs, panel seals,
and actuator removal tools.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
4 |V–Series Contura Sealed Rocker Switches
1.450[36.83]
.830[21.08]
SWITCH
MOUNTING HOLE
TEST CUT
HOLE IN
ACTUAL
MATERIAL
Mechanical
Physical
Actuator Travel (Angular Displacement)
Contact Rating 4VA @ 28VDC (MAX) resistive
15 amps, 125VAC
10 amps, 250VAC
1/2 HP 125-250VAC
20 amps, 4-14VDC
15 amps, 15-28VDC
10A, 14VT
6A, 125VAC L
Dielectric Strength 1500 Volts RMS
Insulation Resistance 50 Megohms
Initial Contact Resistance 10 milliohms max. @ 4VDC
Life 50,000- 100,000 cycles circuit
dependent
Contacts Silver alloy, silver tin-oxide, ne silver
Terminals Brass or copper/silver plate 1/4”
(6.3mm) Quick Connect terminations
standard. Solder lug, Wire Lead
Environmental Sealed version: IP68, in accordance
with IEC 60529, BS 5490, DIN 40050
& NFC 20 010. This rating applies to
front panel components of the
actual switch only, and signies
protection against dust and the
prolonged effects of immersion
under pressure. The standard test
for immersion under pressure
requires submersion under one
meter of water for 30 minutes. The
V-Series switch has exceeded these
parameters, having been actuated
and illuminated during submersion.
Corrosion Flowing Mixed Gas (FMG)
Class III 3 year accelerated
exposure per ASTM B-827, B-845
Silver and gold contacts
Operating Temperature -40°C to + 85°C
Vibration 1 Per Mil-Std 202F, Method 204D
Test Condition A 0.06 DA or 10G’s
10-500 Hz. Tested with VCH
connector. Test criteria - No loss of
circuit during test and pre and post
test contact resistance.
Vibration 2 Resonance search
24-50 Hz 0.40 DA
50-2000 ±10 G’s peak
Results Horizontal Axis 3-5 G’s max.
Random
24 Hz 0.06 PSD-Gsq/Hz
60 Hz 0.50
100 Hz 0.50
200 Hz 0.025
2000 Hz 0.025
No loss of circuit during test; <10μ
seconds chatter.
Shock Per Mil-Std 202F, Method 213B, Test
Condition K @ 30G’s. Tested with
VCH connector. Test criteria - No loss
of circuit during test, pre and post
test contact resistance.
Salt Spray Per Mil-Std 202F, Method 101D, Test
Condition A, 48 Hrs. Sealed version
only.
Dust Per Mil-Std 810C, Method 510.2 Air
Velocity 300 ±200 Feet/Min, Test
Duration 16 Hrs.
Thermal Shock Per Mil-Std 202F, Method 107F, Test
Cond. A, -55°C to 85°C. Test criteria -
pre and post test contact resistance
Moisture Resistance Per Mil-Std 202F, Method 106F, Test
Criteria - pre and post test contact
resistance
Ignition Protection All Contura switches with sealed
construction meet the requirements
of UL1500/ISO8846 for ignition
protection, in addition to
conformance with EC directive
94/25/EC for marine products.
Lighted Incandescent - rated 10,000 hours
Neon - rated 25,000 hours
LED - rated 100,000 hours 1/2 life
(LED is internally ballasted for
voltages to 24VDC)
Seals Internal
Optional external gasket panel seal
Base Polyester blend rated to 125°C with a
UL ammability rating of 94V0.
Contura II, III, IV, V, VI
Actuator Hard Surface: Basic actuator
structure molded of thermoplastic
polycarbonate with a hard Nylon 66
thermoplastic surface overlay.
Soft Surface: Basic actuator structure
molded of thermoplastic
polycarbonate with an elastomer overlay.
Contura X, XI, XII
Actuator, VP Nylon 66 Reinforced rated to 105°C
Lens Polycarbonate rated at 100°C
Endurance 150,000 cycles minimum
circuit dependent
2 position 18°
3 positions 9° from center
Panel Thickness Range
# of gaskets Acceptable Panel Thickness
0 .030 to .250 (.76mm to 6.35mm)
1 .030 to .109 & .147 to .157
(.76 to 2.77mm & 3.73 to 3.98mm)
Recommended: No gasket with panel thickness of
.032, .062, .093, .125,.187 or .250
Electrical Agency Certifications
Environmental
Mounting Specifications
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 5 V–Series Contura II, III, & IV
Dimensional Specifications: in. [mm]
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
6 |
1.079
[27.40]
.505
[12.83]
.505
[12.83]
8
1
7
4
78
41
3
6
9
6
3
.250
[6.35]
X
.031
[.78]
.250
[6.35]
X
.031
[.78]
CONTURA V
SHOWN WITH
LOW PROFILE LOCK
8 TERMINAL BASE
W/O BARRIERS
8 TERMINAL BASE
W/O BARRIERS
10
BOTTOM VIEW
TERMINAL
ARRANGEMENT
10 TERMINAL BASE
BOTTOM VIEW
TERMINAL
ARRANGEMENT
8 TERMINAL BASE
.820
[20.83]
1.020
[25.91]
1.479
[37.57]
1.922[48.56]
1.126
.080[2.03]
5
22
5
2.029
[51.53]
CONTURA V
SHOWN WITH
BAR LENS
1.020
[25.91]
1.550
[39.37]
1.922[48.56]
8 TERMINAL BASE
W/BARRIERS
8 TERMINAL BASE
W/BARRIERS
.390
[9.90]
SWITCH SHOWN WITH
VCH CONNECTOR 8
TERMINAL
.960
[24.38] .960
[24.38]
.250
[6.35]
X
.031
[.78]
.820
[20.83]
.960
[24.38]
1.000
[25.40]
1.950[49.53]
SWITCH SHOWN WITH
VC1 CONNECTOR 10
TERMINAL
10 TERMINAL BASE
W/BARRIER AND
LAMP TERMINAL
10 TERMINAL BASE
W/O BARRIERS
CONTURA VI
SHOWN WITH OVAL
LENS
CONTURA VII
SHOWN WITH LARGE LENS
AND BAR LENS
10 TERMINAL BASE
W/O BARRIERS
1.922[48.82]
10 TERMINAL BASE
W/O BARRIERS
0.985
[25.02]
.250 [6.35]
.031 [.78]
.820
[20.83]
.960
[24.38]
SWITCH SHOWN
WITH VC1
CONNECTOR 10
TERMINAL
V-Series Contura V, VI & VII
Dimensional Specifications: in. [mm]
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 7
8 TERMINAL BASE
W/O BARRIERS
.780[19.81]
10 TERMINAL
BASE
W/O BARRIERS
.390[9.90]
1.506[38.25]1.586[40.28]
.350[8.89]
.390[9.90]
.250[6.35]
X
.031[.78]
10
8
2
1
9
4
7
63
5
1
8
2
7
4
5
36
CONTURA XI STYLE
SHOWN WITH RAISED
BRACKET AND TWO SQUARE
LENSES
BOTTOM VIEW
TERMINAL
ARRANGEMENT
10 TERMINAL BASE
SWITCH SHOWN WITH
VC1 CONNECTOR
10 TERMINAL
.820[20.82]
10 TERMINAL BASE
W/BARRIERS
.780[19.81]
1.370[34.79]
10 TERMINAL BASE
W/O BARRIERS
.820[20.82]
.426[10.82]1.910[48.51] 1.305[33.15]
BOTTOM VIEW
TERMINAL
ARRANGEMENT
8 TERMINAL BASE
.350[8.89]
.667 [16.94]
CONTURA X STYLE
SHOWN WITH RAISED BRACKET
8 TERMINAL BASE
W/BARRIERS
SWITCH SHOWN WITH
VCH CONNECTOR
8 TERMINAL
8 TERMINAL BASE
W/BARRIERS
.780[19.81]
1.910[48.51]
1.370[34.79]
.820[20.82]
.390[9.90]
CONTURA XII STYLE
SHOWN WITH PADDLE
ACTUATOR
.960[24.38] .960[24.38]
.960[24.38]
1.370[34.79]
V-Series Contura X, XI & XII
Dimensional Specifications: in. [mm]
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
8 |
25
1346
6431
DEFINITION
CIRCUITCIRCUIT
A J
3
25
3
63
2
34 6
L
M
5
52
K
1
52
D
431
C
3
2
B
5
2
3
CIRCUIT
1
3
3
3
2
2
2
4
1 3
31
R
25
52
13 6
S
6
F
13
E
52
25
3
43
4
1
SYM.
43
25
H
2 5
13
6
13
31
2
2
5
8
2
31
6
CIRCUIT DIAGRAM
2
6
6
6
6
6
6
G
CIRCUIT DIAGRAM
7
52522
CIRCUIT DIAGRAM
SYMBOL LEGEND
DESIGNATES TERMINALS AND CONTACTS
DESIGNATES LAMP LOCATION
DESIGNATES MAINTAINED CIRCUITS
DESIGNATES OTHER POSITION
DESIGNATES MOMENTARY CIRCUITS
DESIGNATES TWO POSITION CONNECTION
DESIGNATES EXTERNAL JUMPER PROVIDED
BY CUSTOMER
V-Series Contura V & VI - Circuit Diagram
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 9
1
LAMP
CIRCUIT CIRCUIT DIAGRAM
+3
+3 -6
CIRCUIT DIAGRAM
LAMP
CIRCUIT
1
L/9
2
-6
+8 +3
-7
SPECIAL
#4
21
SPECIAL
#1
2
-7
+6+3
1
+6+8
2
SPECIAL
#3
+10
21
2
-4 -6+3+1
1
+8
G/7
F/6
+3
12
+8
1
-7
+8 -6+3
2
CIRCUIT DIAGRAM
LAMP
CIRCUIT
M/R
+8
LAMP
CIRCUIT
1
-7
1
+3
J/8
H/Z
+8
+6
-7
12
-8 +6
2
-7
+3
+8
P/V
N/T
+1 -6+3 -4
11 614
CIRCUIT DIAGRAM
CIRCUIT
JJ
-7 -9
12
11 13 3
D/4
C/3
-7
+1
-7
+3
+3
1
+3
+1
B/2
A/1
12
3110(-)
13 333311 14
JA
5
11 13 314141411 13 3313
14
1
-7
SYM.
13 15 12 6161411 3
JK
333
K/W
2
2
85
J5
CIRCUIT CIRCUIT DIAGRAM
(-)7
2
1311 31311 33311 1311 13
J1
E/5
558822
13
CIRCUIT
J2
17 18 10(-)
1
2
CIRCUIT DIAGRAM
2
2
-7 -7 -7
DESIGNATES TERMINALS AND CONTACTS
DESIGNATES LAMP LOCATION
DEFINITION
SYMBOL LEGEND
17 18
13
852
13
J4
J3
58
5
U/Y
1
17 18 10(-)
17 18 10(-)
1
CIRCUIT DIAGRAM
17 18 10(-)
1
CONNECTOR PART #
16
3
14143
5
CIRCUIT DIAGRAM
14 6
33
14
314
333
JA,JJ,JK
J2
CIRCUIT
J1,J3,J4,J5
228855
3
17 18
58
2
2
10(-) 13
CIRCUIT DIAGRAM
JA
61215333314
8
5
3
SYMBOL LEGEND
DEFINITION
JK
JJ
1
17 18 10(-)
17 18 10(-)
CIRCUIT DIAGRAM
14
31
1311
CIRCUIT
13 11
1113
SYM.
CIRCUIT
J5
1
1
17 18 10(-)
17 18 10(-)
1
1
25
8
2
31
5
JC3-01
JC2-01
JC1-01
J3
J4
J2
CIRCUIT
J1
DESIGNATES TERMINALS AND CONTACTS
DESIGNATES LAMP LOCATION
DESIGNATES TWO POSITION CIRCUIT
DESIGNATES TERMINALS AND CONTACTS
DESIGNATES LAMP LOCATION
DESIGNATES TWO POSITION CIRCUIT
1113
V-Series Contura X, XI & XII - Circuit Diagram
NOTE:
J circuits are available for
all non-locking V-Series
styles. Consult factory for
p/n details.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
10 |V-Series Contura II & III Sealed Rocker Switches
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
4
Custom colors are available. Consult factory.
Body legends not available on Soft surface actuators; White imprinting is standard on
black actuators; Black imprinting is standard on white, red and gray actuators; Custom
colors are available, consult factory.
Additional ratings available. See page 20.
Contura II available with two square lenses. Consult factory for details.
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lamp
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Color
12
Legend
13
Legend
Orientation
14
Actuator
Lens Legend
4
Termination
V 1 A B A R 00 00D T 0 B B 0
1 SERIES
V
3 RATING3
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
9 ACTUATOR
No Actuator
Contura II
Contura III
Actuator orientation above terminals:
0
A
B
C
D
11 ACTUATOR COLOR1 AND TEXTURE
0 - No Actuator
Black Gray Red White
Soft Surface B G R W
Hard Surface C H S Y
13 LEGEND ORIENTATION
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
14 ACTUATOR LENS LEGEND
00 No legend this location / no actuator
(used with codes 11-18 in selection 12) Selection 14 required when switch requires two
legends. If the two legends consist of one lens and one body legend, lens legend must be
specied in selection 12; body legend specied in selection 14.
For legend options & codes, visit us at www.carlingtech.com.
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
SPECIAL CIRCUITS
H*
G*
S
M*
R
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
OFF
(OFF)
ON
(ON)
ON
(ON)
(ON)
5 & 4
OFF
1 & 2
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
NONE
NONE
NONE
OFF
OFF
OFF
2 & 3, 5 & 4
2 & 3
2 & 3
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
(ON)
ON
ON
ON
ON
ON
(ON)
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
(2 & 3, 5 & 6)
(2 & 3, 5 & 6)
5 & 6
10 LENS
0 - No Actuator Z - No Lens
Clear
1
2
3
Square lens options available only for Contura II:
4
5
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
White
6
7
8
9
A
Amber
B
C
D
E
F
Green
G
H
J
K
L
Red
M
N
P
R
S
Blue
T
U
V
W
Y
ORIENTATION 2
ORIENTATION 1
ORIENTATION 4
ORIENTATION 3
ORIENTATION OF
ACTUATOR/LENS IN PANEL
45
SLEEPER
LIGHTS
A9C45-200
AC
E3
E5
AZCAC-100
ARCMC-100
MC
A9CE3-1E5
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Single Pole Switches Only:
Selections for Double Pole Switches Only:
Terminals
8+ 7-
3+ 7-
3+ 7-
3+ 7-
1+ 7-
1+ 7-
3+ 7-
8+ 7-
3+ 6-
8+ 7-
3+ 7-
8+ 7-
8+ 7-
10+ 9-
3+ 8-
6+ 7-
8+ 7-
6+ 7-
3+ 6-
3+ 6-
3+ 6-
1+ 4-
1+ 4-
3+ 6-
when Illuminated
Independent
Down
Up
Down
Down
Up
Up
Independent
Up
Independent
Up
Independent
Independent
Independent
Down
Independent
Independent
Independent
Down
Up
Down
Down
Up
Up
Lamps
NONE
# 1
# 1
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
#1
# 2
# 1
&# 2
# 1
&# 2
Unsealed
0
1
2
3
4
5
6
7
Z
Y
8
W
9
R
T
V
Sealed
S
A
B
C
D
E
F
G
H
U
J
K
L
M
N
P
6,7 LAMP (SAME CODING FOR BOTH SELECTIONS)
Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 FLUSH BRACKET COLOR1, PANEL SEAL
No Seal
One Seal
Black
B
C
White
W
Y
Gray
G
H
1,43,6
12 ACTUATOR LENS OR BODY LEGENDS2
For additional legend options & codes, visit us at www.carlingtech.com.
O
F
F
15 O
N
ON
OFF
11 OFF
ON
12 |
O
13 O
|
14
O
F
F
16 O
N
O17 | |18 O
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 11 V-Series Contura II & III Locking Sealed Rocker Switches
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
4
Custom colors are available. Consult factory.
White imprinting is standard on black actuators; Black imprinting is standard on
white, red and gray actuators; Custom colors are available, consult factory.
Only available with 3 position circuits. Center OFF and special circuits only available
with center position lock function.
Additional ratings available. See page 20.
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lock
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Function
12
Legend
13
Legend
Orientation
4
Termination
V 1 A S A Z 00D W 0 B E 0
1 SERIES
V
3 RATING4
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
9 HARD SURFACE ACTUATOR1
Contura II
Contura III
Actuator orientation above terminals:
Black
A
C
11 ACTUATOR LOCK FUNCTION AND COLOR1
Lock Color Up Down Up & Down Center3
Match Actuator A H R 1
Black B J S 2
White C K T 3
Red D L V 4
Safety Orange E M W 5
12 ACTUATOR LENS OR BODY LEGEND2
00 - No Legend
21 22 23 24
OFF ON O I
25 O 26 O 27 O 28 I
F N
F
For additional legend options & codes, visit us at www.carlingtech.com.
13 LEGEND ORIENTATION
0 No legend (used with codes 21-28 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
SPECIAL CIRCUITS
H*
G*
S
M*
R
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
OFF
(OFF)
ON
(ON)
ON
(ON)
(ON)
5 & 4
OFF
1 & 2
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
NONE
NONE
NONE
OFF
OFF
OFF
2 & 3, 5 & 4
2 & 3
2 & 3
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
(ON)
ON
ON
ON
ON
ON
(ON)
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
(2 & 3, 5 & 6)
(2 & 3, 5 & 6)
5 & 6
10 LENS
Z - No Lens
Clear
3
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
White
8
Amber
D
Green
J
Red
P
Blue
V
ORIENTATION 2
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 3
ORIENTATION 1
ORIENTATION 4
AZC45-1
45
AZC45-2
45
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Double Pole Switches Only:
Terminals
3+ 7-
8+ 7-
3+ 6-
when Illuminated
Up
Independent
Up
Lamps
NONE
# 2
# 2
# 2
Unsealed
0
3
Z
R
Sealed
S
C
H
M
6 LOCK
Lock above terminals 1 & 4 end of switch.
W lock
7 LAMP
Lamp above terminals 3 & 6 end of switch
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 FLUSH BRACKET COLOR1, PANEL SEAL
No Seal
One Seal
Black
B
C
White
W
Y
Gray
G
H
1,43,6
Grey
B
D
Red
G
E
White
H
F
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
12 |V-Series Contura IV Sealed Rocker Switches
12 ACTUATOR LENS OR BODY LEGENDS2
For additional legend options & codes, visit us at www.carlingtech.com.
O
F
F
15 O
N
ON
OFF
11 OFF
ON
12 |
O
13 O
|
14
O
F
F
16 O
N
O17 | |18 O
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
4
5
6
Custom colors are available. Consult factory.
White imprinting is standard on black actuators; Black imprinting is standard on white,
red and gray actuators; Custom colors are available, consult factory.
Gloss brow is on left side of E actuator and right side of F actuator.
Additional ratings available. See page 20.
Laser etched rocker only available with lens code Z & actuator colors black, nickel or
pewter.
Pewter and nickel colors only available with laser etched actuator.
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lamp
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Color
12
Legend
13
Legend
Orientation
14
Actuator
Lens Legend
4
Termination
V 1 A B E R 00 00D T 0 B C 0
1 SERIES
V
3 RATING4
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
9 ACTUATOR
No Actuator
Contura IV, left orientation
Contura IV, left orientation, laser etched
Contura IV, right orientation
Contura IV, right orientation, laser etched
Actuator orientation above terminals:
0
E
T
F
R
11 ACTUATOR COLOR1,5,6
No Actuator 0 Black C Gray H Red S White Y Nickel D Pewter E
13 LEGEND ORIENTATION
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
SPECIAL CIRCUITS
H*
G*
S
M*
R
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
OFF
(OFF)
ON
(ON)
ON
(ON)
(ON)
5 & 4
OFF
1 & 2
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
NONE
NONE
NONE
OFF
OFF
OFF
2 & 3, 5 & 4
2 & 3
2 & 3
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
(ON)
ON
ON
ON
ON
ON
(ON)
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
(2 & 3, 5 & 6)
(2 & 3, 5 & 6)
5 & 6
1,4
3,6
10 LENS
0 - No Actuator Z - No Lens
Clear
1
2
3
4
5
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
White
6
7
8
9
A
Amber
B
C
D
E
F
Green
G
H
J
K
L
Red
M
N
P
R
S
Blue
T
U
V
W
Y
E F
ORIENTATION 3
ORIENTATION 4
ORIENTATION 1
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 2ORIENTATION 2
F8C45-300
F8C45-100
F3C70-200
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Single Pole Switches Only:
Selections for Double Pole Switches Only:
Terminals
8+ 7-
3+ 7-
3+ 7-
3+ 7-
1+ 7-
1+ 7-
3+ 7-
8+ 7-
3+ 6-
8+ 7-
3+ 7-
8+ 7-
8+ 7-
10+ 9-
3+ 8-
6+ 7-
8+ 7-
6+ 7-
3+ 6-
3+ 6-
3+ 6-
1+ 4-
1+ 4-
3+ 6-
when Illuminated
Independent
Down
Up
Down
Down
Up
Up
Independent
Up
Independent
Up
Independent
Independent
Independent
Down
Independent
Independent
Independent
Down
Up
Down
Down
Up
Up
Lamps
NONE
# 1
# 1
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
#1
# 2
# 1
&# 2
# 1
&# 2
Unsealed
0
1
2
3
4
5
6
7
Z
Y
8
W
9
R
T
V
Sealed
S
A
B
C
D
E
F
G
H
U
J
K
L
M
N
P
6,7 LAMP (same coding for both selections)
Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 FLUSH BRACKET COLOR1, PANEL SEAL
No Seal
One Seal
Black
B
C
White
W
Y
Gray
G
H
14 ACTUATOR LENS LEGEND
00 No legend this location / no actuator
(used with codes 11-18 in selection 12) Selection 14 required when switch requires two
legends. If the two legends consist of one lens and one body legend, lens legend must be
specied in selection 12; body legend specied in selection 14.
For legend options & codes, visit us at www.carlingtech.com.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 13 V-Series Contura V Sealed Rocker Switches
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
4
5
6
Custom colors are available. Consult factory.
White imprinting is standard on black actuators; Black imprinting is standard on white,
red and gray actuators; Custom colors are available, consult factory.
Laser Etched rocker only available with lens code Z & actuator colors black, nickel or pewter.
Additional ratings available. See page 20.
Nickel and Pewter colors only available with laser etched actuator.
Consult factory for laser etched lens callout.
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lamp
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Color
12
Legend
13
Legend
Orientation
14
Actuator
Lens Legend
4
Termination
V 1 A B G R 00 00D T 0 B C 0
1 SERIES
V
3 RATING4
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
9 ACTUATOR
No Actuator
Contura V
Contura V, laser etched
0
G
P
11 ACTUATOR COLOR1,3,3
No Actuator 0 Black C Gray H Red S White Y Nickel D Pewter E
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
SPECIAL CIRCUITS
H*
G*
S
M*
R
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
OFF
(OFF)
ON
(ON)
ON
(ON)
(ON)
5 & 4
OFF
1 & 2
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
NONE
NONE
NONE
OFF
OFF
OFF
2 & 3, 5 & 4
2 & 3
2 & 3
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
(ON)
ON
ON
ON
ON
ON
(ON)
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
(2 & 3, 5 & 6)
(2 & 3, 5 & 6)
5 & 6 10 LENS
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
0 - No Actuator Z - No Lens
Clear
1
2
3
4
5
White
6
7
8
9
A
Amber
B
C
D
E
F
Green
G
H
J
K
L
Red
M
N
P
R
S
Blue
T
U
V
W
Y
13 LEGEND ORIENTATION
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
ORIENTATION 4
ORIENTATION 3
ORIENTATION 1
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 2
MA1MC
4G
MC
MA
4G
3L
4G200
MC
MA
MA3MC
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Single Pole Switches Only:
Selections for Double Pole Switches Only:
Terminals
8+ 7-
3+ 7-
3+ 7-
3+ 7-
1+ 7-
1+ 7-
3+ 7-
8+ 7-
3+ 6-
8+ 7-
3+ 7-
8+ 7-
8+ 7-
10+ 9-
3+ 8-
6+ 7-
8+ 7-
6+ 7-
3+ 6-
3+ 6-
3+ 6-
1+ 4-
1+ 4-
3+ 6-
when Illuminated
Independent
Down
Up
Down
Down
Up
Up
Independent
Up
Independent
Up
Independent
Independent
Independent
Down
Independent
Independent
Independent
Down
Up
Down
Down
Up
Up
Lamps
NONE
# 1
# 1
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
#1
# 2
# 1
&# 2
# 1
&# 2
Unsealed
0
1
2
3
4
5
6
7
Z
Y
8
W
9
R
T
V
Sealed
S
A
B
C
D
E
F
G
H
U
J
K
L
M
N
P
6,7 LAMP (same coding for both selections)
Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 FLUSH BRACKET COLOR1, PANEL SEAL
No Seal
One Seal
Black
B
C
White
W
Y
Gray
G
H
Lens style &
location:
#1/ #2
bar
bar/bar
oval
oval/bar
oval/oval
14 ACTUATOR LENS LEGEND
00 No legend this location / no actuator
(used with codes 11-18 in selection 12) Selection 14 required when switch requires two
legends. If the two legends consist of one lens and one body legend, lens legend must be
specied in selection 12; body legend specied in selection 14.
For legend options & codes, visit us at www.carlingtech.com.
12 ACTUATOR LENS OR BODY LEGENDS2,6
For additional legend options & codes, visit us at www.carlingtech.com.
O
F
F
15 O
N
ON
OFF
11 OFF
ON
12 |
O
13 O
|
14
O
F
F
16 O
N
O17 | |18 O
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
14 |V-Series Contura IV & V Locking Sealed Rocker Switches
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lock
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Function
12
Legend
13
Legend
Orientation
4
Termination
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
4
5
6
Custom colors are available. Consult factory.
White imprinting is standard on black actuators; Black imprinting is standard on
white, red and gray actuators; Custom colors are available, consult factory.
Only available with 3 position circuits. Center OFF and special circuits only available
with center position lock function.
Additional ratings available. See page 20.
Located at T3-6 end of switch.
Contura V style only.
V 1 A S J Z 00D W 0 B E 0
1 SERIES
V
3 RATING4
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
11 ACTUATOR LOCK FUNCTION AND COLOR1
Lock Color Up Down Up & Down Center3
Match Actuator A H R 1
Black B J S 2
White C K T 3
Red D L V 4
Safety Orange E M W 5
Gray F G N 6
2 CIRCUIT3
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
4 D
6 J
7 K
8 L
9 N
( ) - momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7& 8 for lamp circuit only.
Terminals 9 & 10 are not used with locking style
switches.
3
1 & 2, 4 & 5
OFF
ON
ON
(ON)
(ON)
ON
2
Connected Terminals
NONE
NONE
OFF
OFF
OFF
NONE
1
2 & 3, 5 & 6
ON
ON
ON
ON
(ON)
OFF
13 LEGEND ORIENTATION
0 No legend
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
ORIENTATION 1
ORIENTATION 2
ORIENTATION 4
ORIENTATION 3
ORIENTATION OF
ACTUATOR/LENS IN PANEL
JHAY3-300
PP
JHAY3-100
P
P
P
NHAY3-100 NHAY3-300
JHAY3-200
NHAY3-200
P
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Double Pole Switches Only:
Terminals
3+ 7-
8+ 7-
3+ 6-
when Illuminated
Up
Independent
Up
Lamps
NONE
# 2
# 2
# 2
Unsealed
0
3
Z
R
Sealed
S
C
H
M
6 LOCK
Lock above terminals 1 & 4 end of switch.
W low prole lock Y6 high prole lock
7 LAMP
Lamp above terminals 3 & 6 end of switch
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 FLUSH BRACKET COLOR1, PANEL SEAL
No Seal
One Seal
Black
B
C
White
W
Y
Gray
G
H
12 ACTUATOR LENS OR BODY LEGEND2
00 - No Legend
21 22 23 24
OFF ON O I
25 O 26 O 27 O 28 I
F N
F
For additional legend options & codes, visit us at www.carlingtech.com.
9 HARD SURFACE ACTUATOR
CONTURA IV:
Orientation
Left
Right
CONTURA V:
Black
J
N
Black
U
1,4
1,4
3,6
3,6
Actuator orientation above terminals:
Actuator orientation above terminals:
Grey
K
P
Grey
V
Red
L
R
Red
W
White
M
S
White
Y
10 LENS5
Z - No Lens
Clear
A
G
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
White
B
H
Amber
C
J
Green
D
K
Red
E
L
Blue
F
M
bar lens
oval lens
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 15 V-Series Contura VI WAVE Sealed Rocker Switches
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
Custom colors are available. Consult factory.
White imprinting is standard on black actuators; Black imprinting is standard on white,
red and gray actuators; Custom colors are available, consult factory.
Additional ratings available. See page 20.
– –
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lamp
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Lens
12
Color
13
Insert
Color
15
Legend
Orientation
14
Actuator
Lens
16
Actuator
Lens Legend
4
Termination
V 1 B G H A AC 00D N T B 7 C B 1
1 SERIES
V
3 RATING3
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
12 ACTUATOR COLOR
C Black H Gray S Red Y White
13 INSERT COLOR
B Black
C Bright Chrome Plated
D Satin Chrome Painted
N Bright Nickel Plated
S Satin Chrome Plated
T Satin Nickel Plated
W White
16 ACTUATOR LENS LEGEND
00 No legend this location / no actuator
(used with codes 11-18 in selection 12) Selection 14 required when switch requires two
legends. If the two legends consist of one lens and one body legend, lens legend must be
specied in selection 12; body legend specied in selection 14.
For legend options & codes, visit us at www.carlingtech.com.
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
SPECIAL CIRCUITS
H*
G*
S
M*
R
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
OFF
(OFF)
ON
(ON)
ON
(ON)
(ON)
5 & 4
OFF
1 & 2
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
NONE
NONE
NONE
OFF
OFF
OFF
2 & 3, 5 & 4
2 & 3
2 & 3
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
(ON)
ON
ON
ON
ON
ON
(ON)
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
(2 & 3, 5 & 6)
(2 & 3, 5 & 6)
5 & 6
10,11 LENS4
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
0 - No Actuator Z - No Lens
Clear
–
3
4
–
White
7
–
–
A
Amber
C
D
E
F
Green
H
J
K
L
Red
N
P
R
S
Blue
U
V
W
Y
1
2
4
2
4
3
1
3
Orientation
Orientation
Orientation
Orientation
15 LEGEND ORIENTATION
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
VTHA7CN-3M100
VTHAACN-MC1MC VTHWZCB-45146
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Single Pole Switches Only:
Selections for Double Pole Switches Only:
Terminals
8+ 7-
3+ 7-
3+ 7-
3+ 7-
1+ 7-
1+ 7-
3+ 7-
8+ 7-
3+ 6-
8+ 7-
3+ 7-
8+ 7-
8+ 7-
10+ 9-
3+ 8-
6+ 7-
8+ 7-
6+ 7-
3+ 6-
3+ 6-
3+ 6-
1+ 4-
1+ 4-
3+ 6-
when Illuminated
Independent
Down
Up
Down
Down
Up
Up
Independent
Up
Independent
Up
Independent
Independent
Independent
Down
Independent
Independent
Independent
Down
Up
Down
Down
Up
Up
Lamps
NONE
# 1
# 1
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
#1
# 2
# 1
&# 2
# 1
&# 2
Unsealed
0
1
2
3
4
5
6
7
Z
Y
8
W
9
R
T
V
Sealed
S
A
B
C
D
E
F
G
H
U
J
K
L
M
N
P
6,7 LAMP (same coding for both selections)
Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 FLUSH BRACKET COLOR1, PANEL SEAL
No Seal
One Seal
Black
B
C
White
W
Y
Gray
G
H
Bar Lens Translucent
Bar Lens Transparent
Oval Lens Transparent
Oval Lens Translucent
9 ACTUATOR
0 No Actuator H High Insert L Low Insert
3
14 ACTUATOR LENS OR BODY LEGENDS2
00 - No Legend this location/No actuator
For additional legend options & codes, see pages 54-65 of the Carling Transportation catalog
O
F
F
15 O
N
ON
OFF
11 OFF
ON
12 |
O
13 O
|
14
O
F
F
16 O
N
O17 | |18 O
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
16 |V-Series Contura VII Sealed Rocker Switches
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lamp
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Color
12
Legend
13
Legend
Orientation
14
Actuator
Lens Legend
4
Termination
V 1 A B Z R 00 00D T 0 B C 0
1 SERIES
V
3 RATING4
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
9 ACTUATOR
No Actuator
Contura VII
0
Z
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
SPECIAL CIRCUITS
H*
G*
S
M*
R
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
OFF
(OFF)
ON
(ON)
ON
(ON)
(ON)
5 & 4
OFF
1 & 2
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
NONE
NONE
NONE
OFF
OFF
OFF
2 & 3, 5 & 4
2 & 3
2 & 3
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
(ON)
ON
ON
ON
ON
ON
(ON)
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
(2 & 3, 5 & 6)
(2 & 3, 5 & 6)
5 & 6
13 LEGEND ORIENTATION
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
1
3
24
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Single Pole Switches Only:
Selections for Double Pole Switches Only:
Terminals
8+ 7-
3+ 7-
3+ 7-
3+ 7-
1+ 7-
1+ 7-
3+ 7-
8+ 7-
3+ 6-
8+ 7-
3+ 7-
8+ 7-
8+ 7-
10+ 9-
3+ 8-
6+ 7-
8+ 7-
6+ 7-
3+ 6-
3+ 6-
3+ 6-
1+ 4-
1+ 4-
3+ 6-
when Illuminated
Independent
Down
Up
Down
Down
Up
Up
Independent
Up
Independent
Up
Independent
Independent
Independent
Down
Independent
Independent
Independent
Down
Up
Down
Down
Up
Up
Lamps
NONE
# 1
# 1
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
#1
# 2
# 1
&# 2
# 1
&# 2
Unsealed
0
1
2
3
4
5
6
7
Z
Y
8
W
9
R
T
V
Sealed
S
A
B
C
D
E
F
G
H
U
J
K
L
M
N
P
6,7 LAMP (same coding for both selections)
Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 FLUSH BRACKET COLOR1, PANEL SEAL
No Seal
One Seal
Black
B
C
White
W
Y
Gray
G
H
14 ACTUATOR LENS LEGEND
00 No legend this location / no actuator
(used with codes 11-18 in selection 12) Selection 14 required when switch requires two
legends. If the two legends consist of one lens and one body legend, lens legend must be
specied in selection 12; body legend specied in selection 14.
For legend options & codes, visit us at www.carlingtech.com.
ACTUATOR
ORENTATION
ABOVE TERMINALS
STANDARD
3,6 1,4
12 ACTUATOR LENS LEGENDS2,4
For additional legend options & codes, visit us at www.carlingtech.com.
O
F
F
15 O
N
ON
OFF
11 OFF
ON
12 |
O
13 O
|
14
O
F
F
16 O
N
O17 | |18 O
10 LENS
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
0 - No Actuator Z - No Lens
White Amber Green Red Blue Lens style & location
6 B G M T
7 C H N U
8 D J P V
9 E K R W
A F L S Y
1 2 3 4 5
11 ACTUATOR COLOR/THUMB PRINT COLOR1
O N/A - No Actuator C Black/Black
H Grey/Black S Red/Black
Y White/Black
1
3
24
1
3
24
46
3AA-246
AA
3AA-146
46
AA
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1 Custom colors are available. Consult factory.
2 White imprinting is standard on black actuators; Black imprinting is standard on white, red
and gray actuators; Custom colors are available, consult factory.
3 Additional ratings available. See page 20.
4 Legends available for lighted ovel lens version only
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 17 V-Series Contura X, XI & XII Sealed Rocker Switches
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
4
5
Custom colors are available. Consult factory.
White imprinting is standard on black actuators; Black imprinting is standard on white, red & gray actuators; Custom colors are available, consult factory.
With 2 square lenses, use sel. 12 for lens above lamp 1, & selection 14 for lens above lamp 2.
Additional ratings available. See page 20.
Not available with Contura XI rockers.
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lamp
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Lens
12
Legend
13
Legend
Orientation
14
Actuator
Lens Legend
4
Termination
V 1 A B 6 P 00 00D 6 0 1 Z 0
1 SERIES
V
3 RATING4
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
14 ACTUATOR LENS LEGEND
00 No legend this location / no actuator
(used with codes 11-18 in selection 12) Selection 14 required when switch requires two
legends. If the two legends consist of one lens and one body legend, lens legend must be
specied in selection 12; body legend specied in selection 14.
For legend options & codes, visit us at www.carlingtech.com.
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
SPECIAL CIRCUITS
H*
G*
S
M*
R
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
OFF
(OFF)
ON
(ON)
ON
(ON)
(ON)
5 & 4
OFF
1 & 2
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
NONE
NONE
NONE
OFF
OFF
OFF
2 & 3, 5 & 4
2 & 3
2 & 3
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
(ON)
ON
ON
ON
ON
ON
(ON)
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
(2 & 3, 5 & 6)
(2 & 3, 5 & 6)
5 & 6
9 ACTUATOR
No Actuator
Contura X
Contura XI
Contura XII
Actuator orientation above terminals:
0
Black
1
6
J
Gray
2
7
K
White
3
8
N
Red
4
9
M1,4
3,6
13 LEGEND ORIENTATION3
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
ORIENTATION 1
ORIENTATION 2
ORIENTATION 4
ORIENTATION 3
ORIENTATION OF
ACTUATOR/LENS IN PANEL
70
MCMA
6FFMA-4MC
6FZ70-100
MC
3G
A7
G3
MA
6ZZ3G-1A7 6FFMA-3MC
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of
switch. Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position `
Terminals
8+ 7-
3+ 7-
3+ 7-
3+ 7-
1+ 7-
1+ 7-
3+ 7-
8+ 7-
3+ 6-
8+ 7-
3+ 7-
8+ 7-
8+ 7-
10+ 9-
3+ 8-
6+ 7-
8+ 7-
6+ 7-
3+ 6-
3+ 6-
3+ 6-
1+ 4-
1+ 4-
3+ 6-
when Illuminated
Independent
Down
Up
Down
Down
Up
Up
Independent
Up
Independent
Up
Independent
Independent
Independent
Down
Independent
Independent
Independent
Down
Up
Down
Down
Up
Up
Lamps
NONE
# 1
# 1
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
# 2
# 1
&# 2
# 1
&# 2
# 1
&# 2
#1
# 2
# 1
&# 2
# 1
&# 2
Unsealed
0
1
2
3
4
5
6
7
Z
Y
8
W
9
R
T
V
Sealed
S
A
B
C
D
E
F
G
H
U
J
K
L
M
N
P
6,7 LAMP (same coding for both selections)
Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6
No lamp
Neon5
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 BRACKET COLOR1, PANEL SEAL (EXTERNAL FOAM GASKET)
0
B
W
G
1
C
Y
H
2
D
Z
J
0
1
2
3
1
4
5
6
# of gaskets
Black
White
Gray
X & XI w/Flush Bracket X, XI, XII w/Raised Bracket
10 LENS - ABOVE LAMP #1 TERMINALS1,4
11 LENS - ABOVE LAMP #2 TERMINALS3,6
0 - No Actuator Z - No Lens
Clear
3
4
5
2
1
* All bottom lenses are molded of opaque material. Consult factory for other lens colors.
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
White
8
9
A
7
6
Amber
D
E
F
C
B
Green
J
K
L
H
G
Red
P
R
S
N
M
Blue
V
W
Y
U
T
Lens Style
Bar
One piece Square
Two piece Square*
(w/ clear top protective lens)
Two piece Square*
(w/ smoke top protective lens)
Two piece Square*
(w/ white top protective lens)
12 ACTUATOR LENS OR BODY LEGEND2
00 - No Legend this location/No actuator
11 ON 12 OFF 13 I 14 O
OFF ON O I
15 O O 16 O O 17 O I 18 I O
F N N F
F F
21 22 23 24
OFF ON O I
25 O 26 O 27 O 28 I
F N
F
For additional legend options & codes, visit us at www.carlingtech.com.
Notes:
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
18 |V-Series Contura X Locking Sealed Rocker Switches
— —
1
Series
2
Circuit
3
Rating
5
Illumination
6
Lock
7
Lamp
8
Bracket
9
Actuator
10
Lens
11
Function
12
Legend
13
Legend
Orientation
4
Termination
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1
2
3
4
Custom colors are available. Consult factory.
White imprinting is standard on black actuators; Black imprinting is standard on
white, red and gray actuators; Custom colors are available, consult factory.
Located over T1-4 end of switch.
Additional ratings available. See page 20.
V 1 A S 1 P 00D W 0 1 B 0
1 SERIES
V
3 RATING4
1 .4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit 6 only)
M .4VA/20A 12V
N .4VA/15A 24V
11 ACTUATOR LOCK FUNCTION AND COLOR3
Lock Color Up Down Up & Down
Match Actuator A H R
Black B J S
White C K T
Red D L V
Gray E M W
Safety Orange F N Y
13 LEGEND ORIENTATION3
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
Orientation 1
Orientation
2
Orientation 3
Orientation
4
13DMC-1
1PM4F-1
18K45-2
MC
4F
45
4 TERMINATION/ BASE STYLE
8 term
1
A
J
3
C
5
E
10 term
2
B
K
4
D
6
F
Note: Codes J & K for circuits H, G & M.
Termination
.250 TAB (QC) no barriers
.250 TAB (QC) with barriers
.250 TAB (QC) no barriers
Solder Lug no barriers
Solder Lug
Wire Leads no barriers
Wire Leads
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp above terminals 3 & 6 end of switch.
Positive (+) and negative (-) symbols apply to LED lamps only
Actuator Lens position Lamp wired to
Selections for Double Pole Switches Only:
Terminals
3+ 7-
8+ 7-
3+ 6-
when Illuminated
Up
Independent
Up
Lamps
NONE
# 2
# 2
# 2
Unsealed
0
3
Z
R
Sealed
S
C
H
M
6 LOCK
Lock above terminals 1 & 4 end of switch.
W lock
7 LAMP
Lamp above terminals 3 & 6 end of switch
No lamp
Neon
Incandescent
LED*
2VDC
6VDC
12VDC
24VDC
* Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma.
0
1 125VAC
4 3V
Red
A
B
C
D
6 12V
superbright
Green
F
G
H
J
7 18V 8 24V
superbright
Red
R
S
T
V
2 250VAC
5 6V
Amber
L
M
N
P
8 RAISED BRACKET COLOR1, PANEL SEAL (EXTERNAL FOAM GASKET)
No Gasket
One Gasket
Black
1
4
White
2
5
Gray
3
6
12 ACTUATOR LENS OR BODY LEGEND2
00 - No Legend
21 22 23 24
OFF ON O I
25 O 26 O 27 O 28 I
F N
F
For additional legend options & codes, visit us at www.carlingtech.com.
9 HARD SURFACE ACTUATOR
Contura X Black
1
1,43,6Actuator orientation above terminals:
Grey
2
Red
3
White
4
2 CIRCUIT
Terminal Connections as viewed
from bottom of switch:
8 terminal 10 terminal
8 - - 7 8 - - 7
1 - - 4 1 - - 4
2 - - 5 2 - - 5
3 - - 6 3 - - 6
10 - - 9
Position:
SP DP
1 A
4 D
6 J
9 N
SPECIAL CIRCUITS
H*
G*
S
E*
*Jumper between terminals 2 & 5 for circuits H, G, & M are specied in selection 4.
External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E
may be used for SP OFF-ON-ON circuit.
( )
- momentary
SP - single pole - uses terminals 1, 2 & 3.
DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
Terminals 7, 8, 9 & 10 for lamp circuit only.
3
1 & 2, 4 & 5
OFF
ON
ON
ON
5 & 4
OFF
1 & 2
5 & 1
2
Connected Terminals
NONE
NONE
OFF
NONE
2 & 3, 5 & 4
2 & 3
2 & 3
5 & 3
1
2 & 3, 5 & 6
ON
ON
ON
OFF
2 & 3
2 & 3, 5 & 6
2 & 3, 5 & 6
5 & 6
10 LENS - ABOVE LAMP #2 TERMINALS3,6
Z - No Lens
Clear
3
4
5
2
1
* All bottom lenses are molded of opaque material. Consult factory for other lens colors.
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
White
8
9
A
7
6
Amber
D
E
F
C
B
Green
J
K
L
H
G
Red
P
R
S
N
M
Blue
V
W
Y
U
T
Lens Style
Bar
One piece Square
Two piece Square*
(w/ clear top protective lens)
Two piece Square*
(w/ smoke top protective lens)
Two piece Square*
(w/ white top protective lens)
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 19 V-Series Contura Sealed Rocker Switch Actuators Separately
1
Actuator Separately
1
Lens Separately
1
Actuator
2
Actuator
Style/Color
2
Color
2
Style &
Color
3
Lens
Opening
3
Lens
Opening
5
Legend
Orientation
5
Legend
7
Legend
4
Actuator
Legend
4
Lens
Opening
6
Legend
Orientation
Notes:
1
2
3
4
5
If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2 must be chosen.
Center of actuator marking not available for Contura XII.
Legend is not available for bar style lens.
Not recommended with neon lamps.
Must also order top piece of 2 piece square lens separately.
1 piece lens/bar lens are positioned the same as bottom lens for assembly, minus the top lens.
Lenses snap in from bottom.
2 COLOR
1 Clear 2 Smoke 3 White
Reduce inventory levels and cost by stocking actuators and base switches separately.
Contura II, III, IV, V, X, XI, XII Base switches separately: specify V with code selections 2-8 in the ordering schemes.
Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes.
Panel Seal: VPS
Contura II, III, IV, V Actuator only: VV with code A, C, E, G or P for selection 9 & with selections 10-14 in the ordering schemes.
Contura X, XI, XII actuators with lenses separately: VV with code selections 9-14 in the ordering schemes.
Contura X & XI actuators without lenses separately:
Contura X, XI & XII top piece of 2-piece lens separately:
Contura X, XI & XII actuator lens assembly:
Contura XII actuators without lenses separately:
VVR
VVT
VVP6
1
J 00 21 0011 1 Z 1
1 CONTURA X & XI ACTUATOR SEPARATELY
VVP
1 TOP OF LENS SEPARATELY
VVT
1 CONTURA XII ACTUATOR SEPARATELY
VVP
3,4 LENS OPENING FOR
6 LEGEND ORIENTATION3
0 No legend
1 Orientation 1
2 Orientation 2
2 ACTUATOR STYLE & COLOR
Contura X
Contura XI
Black
1
6
Gray
2
7
White
3
8
Red
4
9
3 LENS OPENING FOR1
1 One bar lens
2 One bar lenses
3 One square lens
4 two square lens
5 square lens on top/
bar lens on bottom
(Contura X only)
4 ACTUATOR LENS OR BODY LEGEND
00 - No Legend this location
11 ON 12 OFF 13 I 14 O
OFF ON O I
15 O O 16 O O 17 O I 18 I O
F N N F
F F
For additional legend options & codes, visit us at www.carlingtech.com.
5, 7 LENS OR BODY LEGEND2
00 - No Legend 21 22 23 24
OFF ON O I
25 O 26 O 27 O 28 I
F N
F
For additional legend options & codes, visit us at www.carlingtech.com.
4 LENS OR BODY LEGEND2
00 - No Legend 21 22 23 24
OFF ON O I
25 O 26 O 27 O 28 I
F N
F
For additional legend options & codes, visit us at www.carlingtech.com.
5 LEGEND ORIENTATION1
0 No legend
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
ORIENTATION 1
ORIENTATION 2ORIENTATION 4
ORIENTATION 3
ORIENTATION OF
ACTUATOR/LENS IN PANEL
actuator stem top lens
bottom lens }two piece
lens assembly
posts mount toward actuator stem
2 ACTUATOR STYLE & COLOR
J Black K Gray N White M Red
Z No lens 1 Bar lens 2 Square lens
1
Lens Separately
2
Lens
Style
3
Lens
Color
5
Legend
Orientation
4
Legend
Contura X, XI & XII actuator lens assembly separately:
VVL 2 00 01
1 CONTURA X, XI & XII LENS SEPARATELY
VVL
2 LENS STYLE3
1 Bar lens 2 One Piece Square lens 3 Bottom of Two-Piece Square lens5
3 TRANSLUCENT LENS COLOR
1 Clear 2 White 3 Amber 4 Green4 5 Red 6 Blue4
5 LEGEND ORIENTATION3
0 No legend
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4
ORIENTATION 1
ORIENTATION 2
ORIENTATION 4
ORIENTATION 3
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 1
ORIENTATION 2
ORIENTATION OF
ACTUATOR/LENS IN PANEL
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
20 |V-Series Contura Sealed Rocker Switch Accessories
6
AMP, PACKARD 58
7
PACKARD 630
A
B
54
MARKING DETAIL
REAR VIEW
.770[19.56]
MM
(REF)
3.012
(2)1.0-2.0(2)16-14
.950[24.13]
SYMBOL
TANG
ORIEN-
TATION
.5-.820-18
1.0-2.016-14
AWG
B
WIRE
RANGE
.5-.8
.35-.5
20-18
20-22
.8-2
1.3-316-12
(2)22-18
16-14
18-14
A
.3-.9
B
1.0-2.0
12 3.0
(2).5-.8
22-18
(2) 1.3(2) 16
.820[20.83]
.820[20.83]
60295-1
42100-1
60253-1
12015832
PACKARD
METRI-PACK
630 SERIES
AMP
250 SERIES
FASTIN-FASTON
PACKARD
58 SERIES
02965471
COMPANY
SERIES
02965580
PART NO
02965469
02965470
PLAIN
BRASS
AMP
95 AMP, PACKARD 58
VB1-01
CONTURA X BOOT
8
MARKING DETAIL
REAR VIEW
VC2
4
PACKARD 630
13 2
7 6
B
A
1.466[37.24]
VC2
VC1
6
AMP
82 1
VC2
CONNECTOR HOUSING
(For AMP terminals only)
39
A
B
10
MARKING DETAIL
FRONT VIEW
1.266[32.16]
.757[19.23]
.900 [22.86]
TOP
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
INSERT POINTS UNDER
ACTUATOR
VRT
ACTUATOR REMOVAL
TOOL
(For flush bracket)
1.050[26.67]
AMP, PACKARD 58
71 8
VC1
CONNECTOR HOUSING
3
PACKARD 630
B
4
VC1
A
MARKING DETAIL
FRONT VIEW
10 2
1.266[32.16]
06288318
12084590
12015870
12052224
12015869
60253-2
TIN
PLATED
BRASS
10 5.0
TANG SYMBOL =
12052222
12020035
NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio
60295-2
42100-2
Q.C. SELECTION GUIDE
12010601
2.000[50.80]
3.99 [101.35]
1.466[37.24]
AMP, PACKARD 58
PACKARD 630
MARKING DETAIL
REAR VIEW
5
SHOWS ORIENTATION OF TANG IN SLOT
VCH
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
.920[23.37] .920[23.37] 1.170[29.72]
1.250[31.75]
2
6
AMP, PACKARD 58
7
PACKARD 630
A
B
54
MARKING DETAIL
REAR VIEW
.770[19.56]
MM
(REF)
3.012
(2)1.0-2.0(2)16-14
.950[24.13]
SYMBOL
TANG
ORIEN-
TATION
.5-.820-18
1.0-2.016-14
AWG
B
WIRE
RANGE
.5-.8
.35-.5
20-18
20-22
.8-2
1.3-316-12
(2)22-18
16-14
18-14
A
.3-.9
B
1.0-2.0
12 3.0
(2).5-.8
22-18
(2) 1.3(2) 16
.820[20.83]
.820[20.83]
60295-1
42100-1
60253-1
12015832
PACKARD
METRI-PACK
630 SERIES
AMP
250 SERIES
FASTIN-FASTON
PACKARD
58 SERIES
02965471
COMPANY
SERIES
02965580
PART NO
02965469
02965470
PLAIN
BRASS
AMP
95 AMP, PACKARD 58
VB1-01
CONTURA X BOOT
8
MARKING DETAIL
REAR VIEW
VC2
4
PACKARD 630
13 2
7 6
B
A
1.466[37.24]
VC2
VC1
6
AMP
82 1
VC2
CONNECTOR HOUSING
(For AMP terminals only)
39
A
B
10
MARKING DETAIL
FRONT VIEW
1.266[32.16]
.757[19.23]
.900 [22.86]
TOP
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
INSERT POINTS UNDER
ACTUATOR
VRT
ACTUATOR REMOVAL
TOOL
(For flush bracket)
1.050[26.67]
AMP, PACKARD 58
71 8
VC1
CONNECTOR HOUSING
3
PACKARD 630
B
4
VC1
A
MARKING DETAIL
FRONT VIEW
10 2
1.266[32.16]
06288318
12084590
12015870
12052224
12015869
60253-2
TIN
PLATED
BRASS
10 5.0
TANG SYMBOL =
12052222
12020035
NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio
60295-2
42100-2
Q.C. SELECTION GUIDE
12010601
2.000[50.80]
3.99 [101.35]
1.466[37.24]
AMP, PACKARD 58
PACKARD 630
MARKING DETAIL
REAR VIEW
5
SHOWS ORIENTATION OF TANG IN SLOT
VCH
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
.920[23.37] .920[23.37] 1.170[29.72]
1.250[31.75]
2
6
AMP, PACKARD 58
7
PACKARD 630
A
B
54
MARKING DETAIL
REAR VIEW
.770[19.56]
MM
(REF)
3.012
(2)1.0-2.0(2)16-14
.950[24.13]
SYMBOL
TANG
ORIEN-
TATION
.5-.820-18
1.0-2.016-14
AWG
B
WIRE
RANGE
.5-.8
.35-.5
20-18
20-22
.8-2
1.3-316-12
(2)22-18
16-14
18-14
A
.3-.9
B
1.0-2.0
12 3.0
(2).5-.8
22-18
(2) 1.3(2) 16
.820[20.83]
.820[20.83]
60295-1
42100-1
60253-1
12015832
PACKARD
METRI-PACK
630 SERIES
AMP
250 SERIES
FASTIN-FASTON
PACKARD
58 SERIES
02965471
COMPANY
SERIES
02965580
PART NO
02965469
02965470
PLAIN
BRASS
AMP
95
AMP, PACKARD 58
VB1-01
CONTURA X BOOT
8
MARKING DETAIL
REAR VIEW
VC2
4
PACKARD 630
13 2
7 6
B
A
1.466[37.24]
VC2
VC1
6
AMP
82 1
VC2
CONNECTOR HOUSING
(For AMP terminals only)
3
9
A
B
10
MARKING DETAIL
FRONT VIEW
1.266[32.16]
.757[19.23]
.900 [22.86]
TOP
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
INSERT POINTS UNDER
ACTUATOR
VRT
ACTUATOR REMOVAL
TOOL
(For flush bracket)
1.050[26.67]
AMP, PACKARD 58
71 8
VC1
CONNECTOR HOUSING
3
PACKARD 630
B
4
VC1
A
MARKING DETAIL
FRONT VIEW
10 2
1.266[32.16]
06288318
12084590
12015870
12052224
12015869
60253-2
TIN
PLATED
BRASS
10 5.0
TANG SYMBOL =
12052222
12020035
NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio
60295-2
42100-2
Q.C. SELECTION GUIDE
12010601
2.000[50.80]
3.99 [101.35]
1.466[37.24]
AMP, PACKARD 58
PACKARD 630
MARKING DETAIL
REAR VIEW
5
SHOWS ORIENTATION OF TANG IN SLOT
VCH
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
.920[23.37]
.920[23.37]
1.170[29.72]
1.250[31.75]
2
6
AMP, PACKARD 58
7
PACKARD 630
A
B
54
MARKING DETAIL
REAR VIEW
.770[19.56]
MM
(REF)
3.012
(2)1.0-2.0(2)16-14
.950[24.13]
SYMBOL
TANG
ORIEN-
TATION
.5-.820-18
1.0-2.016-14
AWG
B
WIRE
RANGE
.5-.8
.35-.5
20-18
20-22
.8-2
1.3-316-12
(2)22-18
16-14
18-14
A
.3-.9
B
1.0-2.0
12 3.0
(2).5-.8
22-18
(2) 1.3(2) 16
.820[20.83]
.820[20.83]
60295-1
42100-1
60253-1
12015832
PACKARD
METRI-PACK
630 SERIES
AMP
250 SERIES
FASTIN-FASTON
PACKARD
58 SERIES
02965471
COMPANY
SERIES
02965580
PART NO
02965469
02965470
PLAIN
BRASS
AMP
95
AMP, PACKARD 58
VB1-01
CONTURA X BOOT
8
MARKING DETAIL
REAR VIEW
VC2
4
PACKARD 630
13 2
7 6
B
A
1.466[37.24]
VC2
VC1
6
AMP
82 1
VC2
CONNECTOR HOUSING
(For AMP terminals only)
39
A
B
10
MARKING DETAIL
FRONT VIEW
1.266[32.16]
.757[19.23]
.900 [22.86]
TOP
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
INSERT POINTS UNDER
ACTUATOR
VRT
ACTUATOR REMOVAL
TOOL
(For flush bracket)
1.050[26.67]
AMP, PACKARD 58
71 8
VC1
CONNECTOR HOUSING
3
PACKARD 630
B
4
VC1
A
MARKING DETAIL
FRONT VIEW
10 2
1.266[32.16]
06288318
12084590
12015870
12052224
12015869
60253-2
TIN
PLATED
BRASS
10 5.0
TANG SYMBOL =
12052222
12020035
NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio
60295-2
42100-2
Q.C. SELECTION GUIDE
12010601
2.000[50.80]
3.99 [101.35]
1.466[37.24]
AMP, PACKARD 58
PACKARD 630
MARKING DETAIL
REAR VIEW
5
SHOWS ORIENTATION OF TANG IN SLOT
VCH
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
.920[23.37] .920[23.37]
1.170[29.72]
1.250[31.75]
2
6
AMP, PACKARD 58
7
PACKARD 630
A
B
54
MARKING DETAIL
REAR VIEW
.770[19.56]
MM
(REF)
3.012
(2)1.0-2.0(2)16-14
.950[24.13]
SYMBOL
TANG
ORIEN-
TATION
.5-.820-18
1.0-2.016-14
AWG
B
WIRE
RANGE
.5-.8
.35-.5
20-18
20-22
.8-2
1.3-316-12
(2)22-18
16-14
18-14
A
.3-.9
B
1.0-2.0
12 3.0
(2).5-.8
22-18
(2) 1.3(2) 16
.820[20.83]
.820[20.83]
60295-1
42100-1
60253-1
12015832
PACKARD
METRI-PACK
630 SERIES
AMP
250 SERIES
FASTIN-FASTON
PACKARD
58 SERIES
02965471
COMPANY
SERIES
02965580
PART NO
02965469
02965470
PLAIN
BRASS
AMP
95 AMP, PACKARD 58
VB1-01
CONTURA X BOOT
8
MARKING DETAIL
REAR VIEW
VC2
4
PACKARD 630
13 2
7 6
B
A
1.466[37.24]
VC2
VC1
6
AMP
82 1
VC2
CONNECTOR HOUSING
(For AMP terminals only)
3
9
A
B
10
MARKING DETAIL
FRONT VIEW
1.266[32.16]
.757[19.23]
.900 [22.86]
TOP
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
INSERT POINTS UNDER
ACTUATOR
VRT
ACTUATOR REMOVAL
TOOL
(For flush bracket)
1.050[26.67]
AMP, PACKARD 58
71 8
VC1
CONNECTOR HOUSING
3
PACKARD 630
B
4
VC1
A
MARKING DETAIL
FRONT VIEW
10 2
1.266[32.16]
06288318
12084590
12015870
12052224
12015869
60253-2
TIN
PLATED
BRASS
10 5.0
TANG SYMBOL =
12052222
12020035
NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio
60295-2
42100-2
Q.C. SELECTION GUIDE
12010601
2.000[50.80]
3.99 [101.35]
1.466[37.24]
AMP, PACKARD 58
PACKARD 630
MARKING DETAIL
REAR VIEW
5
SHOWS ORIENTATION OF TANG IN SLOT
VCH
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
.920[23.37]
.920[23.37] 1.170[29.72]
1.250[31.75]
2
6
AMP, PACKARD 58
7
PACKARD 630
A
B
54
MARKING DETAIL
REAR VIEW
.770[19.56]
MM
(REF)
3.012
(2)1.0-2.0(2)16-14
.950[24.13]
SYMBOL
TANG
ORIEN-
TATION
.5-.820-18
1.0-2.016-14
AWG
B
WIRE
RANGE
.5-.8
.35-.5
20-18
20-22
.8-2
1.3-316-12
(2)22-18
16-14
18-14
A
.3-.9
B
1.0-2.0
12 3.0
(2).5-.8
22-18
(2) 1.3(2) 16
.820[20.83]
.820[20.83]
60295-1
42100-1
60253-1
12015832
PACKARD
METRI-PACK
630 SERIES
AMP
250 SERIES
FASTIN-FASTON
PACKARD
58 SERIES
02965471
COMPANY
SERIES
02965580
PART NO
02965469
02965470
PLAIN
BRASS
AMP
95 AMP, PACKARD 58
VB1-01
CONTURA X BOOT
8
MARKING DETAIL
REAR VIEW
VC2
4
PACKARD 630
13 2
7 6
B
A
1.466[37.24]
VC2
VC1
6
AMP
82 1
VC2
CONNECTOR HOUSING
(For AMP terminals only)
39
A
B
10
MARKING DETAIL
FRONT VIEW
1.266[32.16]
.757[19.23]
.900 [22.86]
TOP
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
INSERT POINTS UNDER
ACTUATOR
VRT
ACTUATOR REMOVAL
TOOL
(For flush bracket)
1.050[26.67]
AMP, PACKARD 58
71 8
VC1
CONNECTOR HOUSING
3
PACKARD 630
B
4
VC1
A
MARKING DETAIL
FRONT VIEW
10 2
1.266[32.16]
06288318
12084590
12015870
12052224
12015869
60253-2
TIN
PLATED
BRASS
10 5.0
TANG SYMBOL =
12052222
12020035
NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio
60295-2
42100-2
Q.C. SELECTION GUIDE
12010601
2.000[50.80]
3.99 [101.35]
1.466[37.24]
AMP, PACKARD 58
PACKARD 630
MARKING DETAIL
REAR VIEW
5
SHOWS ORIENTATION OF TANG IN SLOT
VCH
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
.920[23.37] .920[23.37] 1.170[29.72]
1.250[31.75]
2
6
AMP, PACKARD 58
7
PACKARD 630
A
B
54
MARKING DETAIL
REAR VIEW
.770[19.56]
MM
(REF)
3.012
(2)1.0-2.0(2)16-14
.950[24.13]
SYMBOL
TANG
ORIEN-
TATION
.5-.820-18
1.0-2.016-14
AWG
B
WIRE
RANGE
.5-.8
.35-.5
20-18
20-22
.8-2
1.3-316-12
(2)22-18
16-14
18-14
A
.3-.9
B
1.0-2.0
12 3.0
(2).5-.8
22-18
(2) 1.3(2) 16
.820[20.83]
.820[20.83]
60295-1
42100-1
60253-1
12015832
PACKARD
METRI-PACK
630 SERIES
AMP
250 SERIES
FASTIN-FASTON
PACKARD
58 SERIES
02965471
COMPANY
SERIES
02965580
PART NO
02965469
02965470
PLAIN
BRASS
AMP
95 AMP, PACKARD 58
VB1-01
CONTURA X BOOT
8
MARKING DETAIL
REAR VIEW
VC2
4
PACKARD 630
13 2
7 6
B
A
1.466[37.24]
VC2
VC1
6
AMP
82 1
VC2
CONNECTOR HOUSING
(For AMP terminals only)
39
A
B
10
MARKING DETAIL
FRONT VIEW
1.266[32.16]
.757[19.23]
.900 [22.86]
TOP
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
INSERT POINTS UNDER
ACTUATOR
VRT
ACTUATOR REMOVAL
TOOL
(For flush bracket)
1.050[26.67]
AMP, PACKARD 58
71 8
VC1
CONNECTOR HOUSING
3
PACKARD 630
B
4
VC1
A
MARKING DETAIL
FRONT VIEW
10 2
1.266[32.16]
06288318
12084590
12015870
12052224
12015869
60253-2
TIN
PLATED
BRASS
10 5.0
TANG SYMBOL =
12052222
12020035
NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio
60295-2
42100-2
Q.C. SELECTION GUIDE
12010601
2.000[50.80]
3.99 [101.35]
1.466[37.24]
AMP, PACKARD 58
PACKARD 630
MARKING DETAIL
REAR VIEW
5
SHOWS ORIENTATION OF TANG IN SLOT
VCH
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
.920[23.37] .920[23.37] 1.170[29.72]
1.250[31.75]
2
Additional V-Series Ratings
1 .4VA @ 28VDC Resistive
4 10A 250VAC 1/2 HP, 15A 125 VAC 1/2 HP, No Agency Listings
5 10A 250VAC 1/2 HP, 15A 125 VAC 1/2 HP, UL Recognized, CSA Certied
6* 15A 125VAC 1/2 HP, 12(2)A 125 VAC μ T85
7* 15A 125VAC 1/2 HP, 12(6)A 125 VAC T85
8* 10A 250VAC, 15A 125VAC, 1/2 HP 125-250VAC, 12(2)A 250 VAC μ T85
9* 10A 250VAC, 15A 125VAC, 1/2 HP 125-250VAC, 12(6)A 250 VAC T85
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuits 1, 4, A, & D only)
F 10A 14V, 6A, 14VT (circuit G only)
G 20A 6V
H 20A 3V
L 15A 125 VAC, 10A 250VAC, 1/2 HP 125-250 VAC; 6A 125 VAC L
M .4VA/20A 12V (combi-contact)
(combination gold/silver contacts for borderline dry circuit applications)
N .4VA/15A 24V (combi-contact)
(combination gold/silver contacts for borderline dry circuit applications)
NOTES
Consult factory to determine availability for individual circuits and their HP rating.
* Ratings 6 - 9 are UL, CSA & VDE certied, require terminations A or B for double pole circuits, & are
not available with illumination circuits 4, 8, D, J, N, & T or with wire lead or solder lug terminations.
Circuits 1, 4, A, D, H, M & E are not available with rating 6 & 8. Rating 7 & 9 only available with circuits
1, 4, A & D. Circuits 2, 3, 5, 7, 8, K, L are 1/2 HP 250VAC only with rating 8. Ratings 6 & 7 must
specify lamp code 1 (125VAC neon). Ratings 8 & 9 must specify lamp code 2 (250VAC neon). Rating
L available with circuits 1, 4, A & D only.
Easily integrate Contura products into your system, with Contura Accessories
Contura Connectors
Contura X Boot (P/N VB1-01)
Contura II, III, IV & V Actuator Removal Tool
(P/N VRT)
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
| 21 V-Series Contura Sealed Rocker Switch Accessories
DETAIL VIEW
VH2,VH4 & VH6
HOLE PLUGS
(With wing serrations)
.830 [21.08] VHP
CONTURA II,III HOLE PLUG
1.820 [46.23]
.430 [10.92] VHP
CONTURA II,III HOLE PLUG
(TYP. FOR VH3 & VH4) VH3
CONTURA IV HOLE PLUG
(No wing serrations)
(TYP. FOR VH5 & VH6)
VH5
CONTURA V HOLE PLUG
(No wing serrations)
DETAIL VIEW
VH1,VH3 & VH5
HOLE PLUGS
(No wing serrations
for ease of removal)
VH1
STANDARD HOLE PLUG
(No wing serrations)
(With VC1 connector attached)
TEST CUT
HOLE IN
ACTUAL
MATERIAL
1.450 [36.83]
VH6
CONTURA V HOLE PLUG
(With wing serrations)
VH4
CONTURA IV HOLE PLUG
(With wing serrations)
1.020 [25.91]
1.240 [31.50]
VH2
STANDARD HOLE PLUG
(With wing serrations)
2.000 [50.80]
1.067 [27.10]
1.928 [48.97]
Contura Hole Plug
Dimensional Specifications: in. [mm]
Contura Mounting Panels
Dimensional Specifications: in. [mm]
REV_SW_V_0612