2x5mm RECTANGULAR SOLID LAMP W103HD BRIGHT RED Features Description !LOW POWER CONSUMPTION. The Bright Red source color devices are made with Gallium !RELIABLE AND RUGGED. Phosphide Red Light Emitting Diode. !EXCELLENT UNIFORMITY OF LIGHT OUTPUT. !SUITABLE FOR LEVEL INDICATOR. ! LONG LIFE - SOLID STATE RELIABILITY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO:DSAD1885 APPROVED: J.LU REV NO: V.1 CHECKED: Allen Liu DATE:APR/10/2003 DRAWN:Y.H.LI PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e W103HD Iv (m c d ) @ 10 m A L en s Ty p e BRIGHT RED (GaP) RED DIFFUSED V i ew i n g An g l e Min . Ty p . 2 1/2 0.4 1 110 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er peak Peak Wavelength Bright Red D Dominate Wavelength Bright Red 1/2 D ev i c e Spectral Line Half-width Bright Red Ty p . Un its Tes t Co n d it io n s 700 nm I F =20mA 660 nm I F =20mA 45 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V C Capacitance Bright Red 40 VF Forward Voltage Bright Red 2.25 IR Reverse Current Bright Red Max . Absolute Maximum Ratings at TA=25C P ar am et er B r i g h t R ed Un its Power dissipation 120 mW DC Forward Current 25 mA Peak Forward Current [1] 130 mA Reverse Voltage 5 V Operating/Storage Temperature -40 C To +85C 260 C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO:DSAD1885 APPROVED: J.LU REV NO: V.1 CHECKED: Allen Liu DATE:APR/10/2003 DRAWN:Y.H.LI PAGE: 2 OF 3 Bright Red SPEC NO:DSAD1885 APPROVED: J.LU W103HD REV NO: V.1 CHECKED: Allen Liu DATE:APR/10/2003 DRAWN:Y.H.LI PAGE: 3 OF 3