www.clare.com
LCA710
Rev. 3
Absolute Maximum Ratings (@ 25˚ C)
2
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at these or
any other conditions beyond those indicated in the opera-
tional sections of this data sheet is not implied. Exposure
of the device to the absolute maximum ratings for an
extended period may degrade the device and effect its
reliability.
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 50 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Surface Mount Package - - +220 °C
(10 Seconds Max.)
1Derate Linearly 1.33 mw/˚C
2Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Voltage (Peak) - VL-- 60 V
Load Current (Continuous)
AC/DC Configuration - IL- - 1.0 A
DC Configuration - IL- - 1.8 A
Peak Load Current 10ms ILPK - - 5.0 A
On-Resistance
AC/DC Configuration IL=1A RON - 0.3 0.5 Ω
DC Configuration IL=1.8A RON - 0.1 0.15 Ω
Off-State Leakage Current VL=60V ILEAK -- 1 µA
Switching Speeds
Turn-On IF=10mA, VL=10V TON - - 2.5 ms
Turn-Off IF=10mA, VL=10V TOFF - - 0.25 ms
Output Capacitance 50V; f=1MHz - - 220 - pF
Capacitance
Input to Output - - - 3 - pF
Input Characteristics @ 25°C
Input Control Current IL=1A IF10 - 50 mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=10mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR-- 5 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics @ 25°C
Input to Output Capacitance - CI/O -3 - pF
Input to Output Isolation - VI/O 3750 - - VRMS